* Symlinks in `$GIT_DIR` are not resolved before matching.
+ * Both the symlink & realpath versions of paths will be matched
+ outside of `$GIT_DIR`. E.g. if ~/git is a symlink to
+ /mnt/storage/git, both `gitdir:~/git` and `gitdir:/mnt/storage/git`
+ will match.
++
+This was not the case in the initial release of this feature in
+v2.13.0, which only matched the realpath version. Configuration that
+wants to be compatible with the initial release of this feature needs
+to either specify only the realpath version, or both versions.
+
* Note that "../" is not special and will match literally, which is
unlikely what you want.
synonyms are accepted for 'true' and 'false'; these are all
case-insensitive.
- true;; Boolean true can be spelled as `yes`, `on`, `true`,
- or `1`. Also, a variable defined without `= <value>`
+ true;; Boolean true literals are `yes`, `on`, `true`,
+ and `1`. Also, a variable defined without `= <value>`
is taken as true.
- false;; Boolean false can be spelled as `no`, `off`,
- `false`, or `0`.
+ false;; Boolean false literals are `no`, `off`, `false`,
+ `0` and the empty string.
+
When converting value to the canonical form using `--bool` type
-specifier; 'git config' will ensure that the output is "true" or
+specifier, 'git config' will ensure that the output is "true" or
"false" (spelled in lowercase).
integer::
rmHints::
In case of failure in the output of linkgit:git-rm[1],
show directions on how to proceed from the current state.
+ addEmbeddedRepo::
+ Advice on what to do when you've accidentally added one
+ git repo inside of another.
--
core.fileMode::
bytes at once to complete an operation it will unmap existing
regions to reclaim virtual address space within the process.
+
-Default is 256 MiB on 32 bit platforms and 8 GiB on 64 bit platforms.
+Default is 256 MiB on 32 bit platforms and 32 TiB (effectively
+unlimited) on 64 bit platforms.
This should be reasonable for all users/operating systems, except on
the largest projects. You probably do not need to adjust this value.
+
If set to "auto", `git-commit` would select a character that is not
the beginning character of any line in existing commit messages.
+core.filesRefLockTimeout::
+ The length of time, in milliseconds, to retry when trying to
+ lock an individual reference. Value 0 means not to retry at
+ all; -1 means to try indefinitely. Default is 100 (i.e.,
+ retry for 100ms).
+
core.packedRefsTimeout::
The length of time, in milliseconds, to retry when trying to
lock the `packed-refs` file. Value 0 means not to retry at
'git-diff-{asterisk}' plumbing commands. Can be overridden on the
command line with the `--color[=<when>]` option.
+diff.colorMoved::
+ If set to either a valid `<mode>` or a true value, moved lines
+ in a diff are colored differently, for details of valid modes
+ see '--color-moved' in linkgit:git-diff[1]. If simply set to
+ true the default color mode will be used. When set to false,
+ moved lines are not colored.
+
color.diff.<slot>::
Use customized color for diff colorization. `<slot>` specifies
which part of the patch to use the specified color, and is one
of `context` (context text - `plain` is a historical synonym),
`meta` (metainformation), `frag`
(hunk header), 'func' (function in hunk header), `old` (removed lines),
- `new` (added lines), `commit` (commit headers), or `whitespace`
- (highlighting whitespace errors).
+ `new` (added lines), `commit` (commit headers), `whitespace`
+ (highlighting whitespace errors), `oldMoved` (deleted lines),
+ `newMoved` (added lines), `oldMovedDimmed`, `oldMovedAlternative`,
+ `oldMovedAlternativeDimmed`, `newMovedDimmed`, `newMovedAlternative`
+ and `newMovedAlternativeDimmed` (See the '<mode>'
+ setting of '--color-moved' in linkgit:git-diff[1] for details).
color.decorate.<slot>::
Use customized color for 'git log --decorate' output. `<slot>` is one
`untracked` (files which are not tracked by Git),
`branch` (the current branch),
`nobranch` (the color the 'no branch' warning is shown in, defaulting
- to red), or
+ to red),
+ `localBranch` or `remoteBranch` (the local and remote branch names,
+ respectively, when branch and tracking information is displayed in the
+ status short-format), or
`unmerged` (files which have unmerged changes).
color.ui::
gc.rerereResolved::
Records of conflicted merge you resolved earlier are
kept for this many days when 'git rerere gc' is run.
+ You can also use more human-readable "1.month.ago", etc.
The default is 60 days. See linkgit:git-rerere[1].
gc.rerereUnresolved::
Records of conflicted merge you have not resolved are
kept for this many days when 'git rerere gc' is run.
+ You can also use more human-readable "1.month.ago", etc.
The default is 15 days. See linkgit:git-rerere[1].
gitcvs.commitMsgAnnotation::
If set to true enable `--autosquash` option by default.
rebase.autoStash::
- When set to true, automatically create a temporary stash
+ When set to true, automatically create a temporary stash entry
before the operation begins, and apply it after the operation
ends. This means that you can run rebase on a dirty worktree.
However, use with care: the final stash application after a
sendemail.<identity>.*::
Identity-specific versions of the 'sendemail.*' parameters
- found below, taking precedence over those when the this
- identity is selected, through command-line or
+ found below, taking precedence over those when this
+ identity is selected, through either the command-line or
`sendemail.identity`.
sendemail.aliasesFile::
sendemail.signedoffcc (deprecated)::
Deprecated alias for `sendemail.signedoffbycc`.
+sendemail.smtpBatchSize::
+ Number of messages to be sent per connection, after that a relogin
+ will happen. If the value is 0 or undefined, send all messages in
+ one connection.
+ See also the `--batch-size` option of linkgit:git-send-email[1].
+
+sendemail.smtpReloginDelay::
+ Seconds wait before reconnecting to smtp server.
+ See also the `--relogin-delay` option of linkgit:git-send-email[1].
+
showbranch.default::
The default set of branches for linkgit:git-show-branch[1].
See linkgit:git-show-branch[1].
behavior of linkgit:git-status[1] in Git 1.8.4 and previous.
Defaults to false.
+status.showStash::
+ If set to true, linkgit:git-status[1] will display the number of
+ entries currently stashed away.
+ Defaults to false.
+
status.showUntrackedFiles::
By default, linkgit:git-status[1] and linkgit:git-commit[1] show
files which are not currently tracked by Git. Directories which
stash.showPatch::
If this is set to true, the `git stash show` command without an
- option will show the stash in patch form. Defaults to false.
+ option will show the stash entry in patch form. Defaults to false.
See description of 'show' command in linkgit:git-stash[1].
stash.showStat::
If this is set to true, the `git stash show` command without an
- option will show diffstat of the stash. Defaults to true.
+ option will show diffstat of the stash entry. Defaults to true.
See description of 'show' command in linkgit:git-stash[1].
submodule.<name>.url::
See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
submodule.<name>.update::
- The default update procedure for a submodule. This variable
- is populated by `git submodule init` from the
- linkgit:gitmodules[5] file. See description of 'update'
- command in linkgit:git-submodule[1].
+ The method by which a submodule is updated by 'git submodule update',
+ which is the only affected command, others such as
+ 'git checkout --recurse-submodules' are unaffected. It exists for
+ historical reasons, when 'git submodule' was the only command to
+ interact with submodules; settings like `submodule.active`
+ and `pull.rebase` are more specific. It is populated by
+ `git submodule init` from the linkgit:gitmodules[5] file.
+ See description of 'update' command in linkgit:git-submodule[1].
submodule.<name>.branch::
The remote branch name for a submodule, used by `git submodule
submodule's path to determine if the submodule is of interest to git
commands.
+submodule.recurse::
+ Specifies if commands recurse into submodules by default. This
+ applies to all commands that have a `--recurse-submodules` option.
+ Defaults to false.
+
submodule.fetchJobs::
Specifies how many submodules are fetched/cloned at the same time.
A positive integer allows up to that number of submodules fetched
projects / platform / upstream / git.git / blobdiff