+=== release 1.3.90 ===
+
+2014-06-28 Sebastian Dröge <slomo@coaxion.net>
+
+ * configure.ac:
+ releasing 1.3.90
+
+2014-06-28 09:59:49 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/ext/libav:
+ libav: Update to v10.2
+
+2014-06-22 19:36:14 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * configure.ac:
+ Back to development
+
+=== release 1.3.3 ===
+
+2014-06-22 19:27:47 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
+ * configure.ac:
+ * docs/plugins/inspect/plugin-libav.xml:
+ * gst-libav.doap:
+ Release 1.3.3
+
+2014-06-21 18:29:32 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/libav/gstavvidenc.c:
+ avvidenc: Make sure to fixate caps before setting them on the pad
+ After the recent addition of negotiation support for MPEG4 part 2
+ profiles via caps it can happen that the generated caps at this
+ point still contain multiple profiles. For example if downstream
+ does not care. Just fixate anything here and use those caps.
+
+2014-06-06 16:52:28 +0200 Wim Taymans <wtaymans@redhat.com>
+
+ * ext/libav/gstavcodecmap.c:
+ avcodecmap: place supported profiles in mpeg4 caps
+ Place the supported profiles in the srcpad caps of the mpeg4 encoder.
+
+2014-06-06 16:25:43 +0200 Wim Taymans <wtaymans@redhat.com>
+
+ * ext/libav/gstavcodecmap.c:
+ avcodecmap: remove deprecated media types
+ Remove x-xvid and x-3ivx. The last place where they were used are
+ in the srcpad caps of the decoder but since the decoder will never
+ actually output those caps we can safely remove them.
+
+2014-06-06 16:19:07 +0200 Wim Taymans <wtaymans@redhat.com>
+
+ * ext/libav/gstavcodecmap.c:
+ codecmap: don't expose more deprecated media types
+ x-xvid is deprecated, we don't want to expose it on the encoder, just
+ leave it only exposed on the decoder.
+
+2014-06-06 16:16:27 +0200 Wim Taymans <wtaymans@redhat.com>
+
+ * ext/libav/gstavcodecmap.c:
+ Revert "avcodecmap: do more reverse mapping of MPEG4"
+ This reverts commit e066785ad05f9119e3c1eded46260bcabd556b4d.
+ x-xvid and x-3ivx are removed, we don't want to expose them again.
+
+2014-06-06 12:40:57 +0100 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+ * ext/libav/gstavaudenc.c:
+ avaudenc: add a comment about using -1 in _finish_frame
+ See https://bugzilla.gnome.org/show_bug.cgi?id=729268
+
+2014-04-30 15:30:45 +0100 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+ * ext/libav/gstavaudenc.c:
+ avaudenc: avoid using wrong number of samples
+ If audio_in is NULL, we'll send a NULL frame to libav, to flush
+ the codec. In that case, we won't know how many samples the codec
+ will have used, so we use -1 (for don't know) when letting the
+ base class know about the buffer.
+ Coverity 1195177
+
+2014-06-02 09:27:17 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/libav/gstavvidenc.c:
+ avvidenc: Fix indention and "bracketing" of goto labels
+ Should fix CID 1219865, which looks like the code analysis
+ algorithm was just confused.
+
+2014-05-29 18:24:20 +0200 Wim Taymans <wtaymans@redhat.com>
+
+ * ext/libav/gstavcodecmap.c:
+ avcodecmap: handle simple and advanced-simple profile in MPEG4
+ Always enable 4MV flag for MPEG4
+ Pare the profile property and enable more features for advanced-simple
+ profile.
+ video/x-xvid is advanced-simple profile so enable more features.
+ We now also support encoding of video/x-xvid so add this to the caps.
+ Fixes https://bugzilla.gnome.org/show_bug.cgi?id=651320
+
+2014-05-29 18:16:42 +0200 Wim Taymans <wtaymans@redhat.com>
+
+ * ext/libav/gstavvidenc.c:
+ avvidenc: do all negotiation before opening the decoder
+ We first want to complete negotiation before opening the encoder.
+ Negotiation might configure flags and other things that might be needed
+ when opening the encoder.
+
+2014-05-29 17:00:23 +0200 Wim Taymans <wtaymans@redhat.com>
+
+ * ext/libav/gstavcodecmap.c:
+ avcodecmap: do more reverse mapping of MPEG4
+ We previously mapped some caps to MPEG4 and codec_tag so we can use the
+ codec_tag again to map to the original caps.
+
+2014-05-26 16:04:50 -0300 Thiago Santos <ts.santos@sisa.samsung.com>
+
+ * ext/libav/gstavdemux.c:
+ avdemux: use GstFlowCombiner
+ To remove replicated code from all demuxers to a single standard way
+ of aggregating flow returns
+
+2014-05-26 16:02:11 -0300 Thiago Santos <ts.santos@sisa.samsung.com>
+
+ * ext/libav/gstavdemux.c:
+ avdemux: remove legacy check from pad-alloc times
+ The 'no_buffer' error case is from the 0.10 era when a pad_alloc was
+ made before decoding the data and avdemuxer could check again the
+ flow returns for a not-linked. This isn't a valid use case anymore in
+ 1.0
+
+2014-05-21 13:23:36 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * configure.ac:
+ Back to development
+
+=== release 1.3.2 ===
+
+2014-05-21 13:06:36 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
+ * common:
+ * configure.ac:
+ * docs/plugins/gst-libav-plugins.args:
+ * docs/plugins/inspect-build.stamp:
+ * docs/plugins/inspect.stamp:
+ * docs/plugins/inspect/plugin-libav.xml:
+ * gst-libav.doap:
+ Release 1.3.2
+
+2014-05-21 10:53:31 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * common:
+ Automatic update of common submodule
+ From 211fa5f to 1f5d3c3
+
+2014-03-17 22:26:52 -0700 Gavin Hurlbut <gjhurlbu@gmail.com>
+
+ * ext/libav/gstavvidenc.c:
+ * ext/libav/gstavvidenc.h:
+ avvidenc: Add thread-count parameter for libav encoders
+ As some libav encoders (such as MPEG2) use a thread_count parameter to control
+ how many threads to use, and since it was always being set to 0 (which uses
+ the default), suboptimal threading can sometimes be chosen. This extends the
+ libav encoders to allow for a max-threads parameter which is passed into
+ the internal structure to control this knob if applicable to the encoder.
+ https://bugzilla.gnome.org/show_bug.cgi?id=726612
+
+2014-05-13 20:17:17 +0200 Mathieu Duponchelle <mathieu.duponchelle@opencreed.com>
+
+ * ext/libav/gstavviddec.c:
+ gstavviddec: Sanitize and fix qos handling.
+ gst_video_decoder_get_max_decding_time doesn't return a GstClockTime
+ but a GstClockTimeDiff, and thus one needs to compare it against
+ G_MAXINT_64.
+ The returning of a boolean and the extra subsequent code in _video_frame
+ was uselessly complicated.
+ The previous behaviour led to artefacts when the decoder tried to
+ hurry up.
+ https://bugzilla.gnome.org/show_bug.cgi?id=730075
+
+2014-05-14 10:19:44 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/ext/libav:
+ Update to libav 10.1
+
+2014-03-27 18:53:53 -0400 Nicolas Dufresne <nicolas.dufresne@collabora.com>
+
+ * ext/libav/gstavviddec.c:
+ videodec: Don't use non-growable pool
+ As we don't know how many output buffers we need to operate, we need to
+ avoid pool that can't grow. Otherwise the pipeline may stall, waiting
+ for buffers. For now, we require it to be able to grow to at least
+ 32 buffers, which I think is a fair amount of buffers for decoders.
+ https://bugzilla.gnome.org/show_bug.cgi?id=726299
+
+2014-05-03 20:48:40 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * configure.ac:
+ Back to development
+
+=== release 1.3.1 ===
+
+2014-05-03 18:34:52 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
+ * configure.ac:
+ * docs/plugins/gst-libav-plugins.hierarchy:
+ * docs/plugins/inspect/plugin-libav.xml:
+ * gst-libav.doap:
+ Release 1.3.1
+
+2014-05-03 10:17:23 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * common:
+ Automatic update of common submodule
+ From bcb1518 to 211fa5f
+
+2014-04-30 16:14:50 +0100 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+ * ext/libav/gstavcodecmap.c:
+ libav: avoid dividing by zero on insane fps/par
+ While there, fix mixup in num/den with par (copied from fps,
+ apparently, and fps inverts fps to time base).
+ Coverity 1139696
+
+2014-04-30 15:59:04 +0100 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+ * ext/libav/gstavvidenc.c:
+ avvidenc: guard against division by zero
+ and other nonsensical time base values while we're at it.
+ Coverity 1139699
+
+2014-04-29 09:13:44 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/libav/gstavaudenc.c:
+ avaudenc: Fix leak of AVBufferRef
+ AVPacket contains AVBufferRef which may leak unless unreffed properly.
+ https://bugzilla.gnome.org/show_bug.cgi?id=726814
+
+2014-03-21 10:10:14 +0100 Stian Selnes <stian@pexip.com>
+
+ * ext/libav/gstavvidenc.c:
+ avvidenc: Fix leak of AVBufferRef
+ AVPacket contains AVBufferRef which may leak unless unreffed properly.
+ https://bugzilla.gnome.org/show_bug.cgi?id=726814
+
+2014-04-14 13:37:02 +0200 Edward Hervey <bilboed@bilboed.com>
+
+ * ext/libav/gstavaudenc.c:
+ avaudenc: Fix compile without gst debug
+ We can just re-use the encoder variable
+
+2014-04-08 08:05:24 +0200 Edward Hervey <edward@collabora.com>
+
+ * ext/libav/gstavdemux.c:
+ avdemux: Remove unused variable
+ CID #1139943
+
+2014-04-08 08:00:55 +0200 Edward Hervey <edward@collabora.com>
+
+ * ext/libav/gstavcodecmap.c:
+ codecmap: Add missing break
+ CID #1139752
+
+2014-04-06 09:02:46 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/libav/gstavcodecmap.c:
+ avcodecmap: Add mapping for Apple Intermediate Codec
+ https://bugzilla.gnome.org/show_bug.cgi?id=727673
+
+2014-03-29 10:45:16 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/ext/libav:
+ Update to libav v10
+
+2014-03-22 17:10:24 +0100 Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+ * ext/libav/gstavvidenc.c:
+ avvidenc: discard input frame upon encoding error
+
+2014-03-05 17:40:13 +0100 Christian Fredrik Kalager Schaller <uraeus@linuxrising.org>
+
+ * gst-libav.spec.in:
+ add docs directory to spec file
+
+2014-02-28 09:36:02 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * common:
+ Automatic update of common submodule
+ From fe1672e to bcb1518
+
+2014-02-27 21:49:42 +0100 Stefan Sauer <ensonic@users.sf.net>
+
+ * docs/Makefile.am:
+ docs: also reactivate make dist for the docs
+
+2014-02-26 22:14:28 +0100 Stefan Sauer <ensonic@users.sf.net>
+
+ * common:
+ Automatic update of common submodule
+ From 1a07da9 to fe1672e
+
+2014-02-26 22:05:23 +0100 Stefan Sauer <ensonic@users.sf.net>
+
+ * docs/plugins/Makefile.am:
+ * docs/plugins/gst-libav-plugins-docs.sgml:
+ * docs/plugins/gst-libav-plugins-sections.txt:
+ * docs/plugins/gst-libav-plugins.hierarchy:
+ docs: try to make the generated docs more useful
+ Generate the section.txt file. Update the -docs.sgml file with the new sections.
+ If we want to actually see the baseclasses, we should define them with a _get_type() function
+ and have the wrapped types subclass them.
+
+2014-02-26 19:13:01 +0100 Stefan Sauer <ensonic@users.sf.net>
+
+ * docs/plugins/inspect/plugin-libav.xml:
+ docs: add the inspected data
+ Not even this file was previously in the repo.
+
+2014-02-26 12:01:52 +0100 Stefan Sauer <ensonic@users.sf.net>
+
+ * configure.ac:
+ * docs/plugins/Makefile.am:
+ * docs/plugins/gst-libav-plugins-docs.sgml:
+ * docs/plugins/gst-libav-plugins.args:
+ * docs/plugins/gst-libav-plugins.hierarchy:
+ * docs/plugins/gst-libav-plugins.interfaces:
+ * docs/plugins/gst-libav-plugins.prerequisites:
+ docs: make the docs build again
+ They are still bad, but if we don't want to have them, we should rather remove this totally.
+
+2014-02-26 11:52:07 +0100 Stefan Sauer <ensonic@users.sf.net>
+
+ * configure.ac:
+ configure: add missing docs/plugins/Makefile
+
+2014-02-26 11:40:08 +0100 Stefan Sauer <ensonic@users.sf.net>
+
+ * docs/Makefile.am:
+ docs: install prebuilt plugin docs if gtk-doc is disabled
+ Sync to the Makefile.am from gst-plugin-base where it is done right.
+ Fixes #725034
+
+2014-02-23 11:40:14 +0100 Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+ * ext/libav/gstavvidenc.c:
+ avvidenc: make all properties work again
+ ... as previously broken due to additional compliance property
+ (see 13ffed87b1597fa60ccee293f71c3993ec59d1b2).
+
+2014-02-22 21:54:08 +0100 Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+ * ext/libav/gstavmux.c:
+ avmux: stream-start and segment event before data-flow
+
+2014-02-20 20:39:29 +0100 Thijs Vermeir <thijsvermeir@gmail.com>
+
+ * ext/libav/gstavviddec.c:
+ avviddec: rename hevc decoder element to h265 for consistency
+ We use h265 for the parser, typefinder, caps, etc. everywhere.
+ https://bugzilla.gnome.org/show_bug.cgi?id=724823
+
+2014-02-21 13:18:47 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * ext/libav/gstavviddec.c:
+ avvidec: don't crash on EOS when no buffers have been received
+ Fixes crash on EOS when no buffers have been received for some
+ reason, e.g. because the parser didn't output any.
+ fakesrc num-buffers=0 format=time ! avdec_h264 ! fakesink
+
+2014-02-21 09:28:16 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/ext/libav:
+ libav: Update to v10 beta1
+
+2014-02-20 17:25:35 -0300 Thiago Santos <ts.santos@sisa.samsung.com>
+
+ * ext/libav/gstavaudenc.c:
+ avaudenc: fix audio encoder flushing according to libav docs
+ * @param[in] frame AVFrame containing the raw audio data to be encoded.
+ * May be NULL when flushing an encoder that has the
+ * CODEC_CAP_DELAY capability set.
+ The AVFrame itself should be null, not the frame.data pointer
+ https://bugzilla.gnome.org/show_bug.cgi?id=724536
+
+2014-02-16 15:58:15 +0100 Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+ * gst-libs/ext/Makefile.am:
+ gst-libs: handle make dist for out-of-tree build
+
+2014-02-04 18:17:32 +0200 Dmitry Melnichenko <dmitry.m@samsung.com>
+
+ * ext/libav/gstavmux.c:
+ avmux: Fix invalid address passing to av_opt_set_int()
+ https://bugzilla.gnome.org/show_bug.cgi?id=723615
+
+2014-02-01 14:40:24 +0100 Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+ * ext/libav/gstavvidenc.c:
+ avvidenc: avoid busy-looping when flushing frames
+ ... such as when receiving EOS event.
+
+2014-01-30 10:45:05 +0100 Edward Hervey <bilboed@bilboed.com>
+
+ * common:
+ Automatic update of common submodule
+ From d48bed3 to 1a07da9
+
+2014-01-24 21:58:35 +0100 Sjoerd Simons <sjoerd@luon.net>
+
+ * ext/libav/gstavdemux.c:
+ avdemux: Don't go into pull mode when the sequential flag is set
+ When the scheduling query results has GST_SCHEDULING_FLAG_SEQUENTIAL set
+ in its flags don't go into pull mode to prevent over-eager seeking.
+ https://bugzilla.gnome.org/show_bug.cgi?id=722935
+
+2014-01-21 22:58:42 +1100 Tim 'mithro' Ansell <mithro@mithis.com>
+
+ * ext/libav/gstavmux.c:
+ avmux: Force DV audio input format to 48kHz, 2 channels
+ libavformat only supports muxing 16bit, 48kHz stereo into DV containers.
+ Fixes https://bugzilla.gnome.org/show_bug.cgi?id=722672
+
+2014-01-19 10:33:01 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/ext/libav:
+ libav: Update to version 10_alpha2
+
+2014-01-17 12:38:23 -0800 Aleix Conchillo Flaqué <aleix@oblong.com>
+
+ * ext/libav/gstavviddec.c:
+ * ext/libav/gstavviddec.h:
+ avviddec: Add output-corrupt property
+ The output-corrupt property will set the CODEC_FLAG_OUTPUT_CORRUPT flag
+ in the codec context. The user can now decide whether libav outputs
+ corrupt frames or not.
+ Previous libav versions had this flag always set.
+ https://bugzilla.gnome.org/show_bug.cgi?id=722453
+
+2014-01-16 13:45:58 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/libav/gstavauddec.c:
+ avauddec: Mark frames as corrupted if libav tells us they are
+ This is currently only implemented by the h264 codec and no audio codec.
+ https://bugzilla.gnome.org/show_bug.cgi?id=722290
+
+2014-01-16 13:44:56 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/libav/gstavviddec.c:
+ avviddec: Mark frames as corrupted if libav tells us they are
+ This is currently only implemented by the h264 codec.
+ https://bugzilla.gnome.org/show_bug.cgi?id=722290
+
+2014-01-15 09:02:33 +0000 Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>
+
+ * ext/libav/gstavauddec.c:
+ * ext/libav/gstavaudenc.c:
+ * ext/libav/gstavcfg.c:
+ * ext/libav/gstavdeinterlace.c:
+ * ext/libav/gstavviddec.c:
+ * ext/libav/gstavvidenc.c:
+ gst-libav: fix context leaks
+ A AVCodecContext needs cleaning up before being freed.
+ Go through all of the allocations/setups to ensure none of them
+ can leak a context or its contents.
+
+2014-01-13 16:31:05 +0100 Wim Taymans <wtaymans@redhat.com>
+
+ * ext/libav/gstavviddec.c:
+ avviddec: set output chroma-site
+ Use libav provided chroma-site and place it on the output caps.
+
+2014-01-10 17:18:53 +0100 Wim Taymans <wtaymans@redhat.com>
+
+ * ext/libav/gstavviddec.c:
+ avviddec: release buffers when not direct rendering
+ New libav will not call the release_buffer callback anymore when
+ avcodec_default_get_buffer() is called from get_buffer. Releasing of the
+ memory in a picture should now be done by registering a callback to the
+ avbuffer objects in the picture. There is some compatibility code to
+ wrap the memory we provide in get_buffer in avbuffer with a callback to
+ release_buffer but that is not done when avcodec_default_get_buffer()
+ is called.
+ Work around this by adding a dummy avbuffer object to the picture that
+ will release the frame.
+ Fixes https://bugzilla.gnome.org/show_bug.cgi?id=721077
+
+2014-01-10 13:16:20 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/libav/gstavauddec.c:
+ avauddec: Give MP3 decoder a MARGINAL rank too
+ There's no reason why this decoder should not be autoplugged
+
+2014-01-06 13:36:39 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/libav/gstavcodecmap.c:
+ * ext/libav/gstavviddec.c:
+ av: Enable HEVC / h265 support
+
+2014-01-06 13:02:07 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/ext/libav:
+ libav: Update to v10_alpha1 tag
+
+2014-01-03 15:58:26 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * ext/libav/gstavcodecmap.c:
+ avcodecmap: fix regression with wmv3 video in WMVA format
+ The VC-1 decoder should handle that. Before avdec_wmv3 handled
+ it, but then we added format=WMV3 to its sink pad template
+ caps, at which point nothing handled WMVA any longer.
+ https://bugzilla.gnome.org/show_bug.cgi?id=697665
+
+2014-01-03 16:28:44 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/libav/gstavcodecmap.c:
+ * ext/libav/gstavcodecmap.h:
+ * ext/libav/gstavmux.c:
+ * ext/libav/gstavutils.c:
+ * ext/libav/gstavutils.h:
+ av: Update for CodecID -> AVCodecID related changes
+
+2014-01-03 16:28:02 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/libav/gstavcfg.c:
+ avcfg: Update config parameters a bit to fix compilation
+ This needs a major rework and should use the new configuration
+ interface where useful.
+
+2014-01-03 16:27:34 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/libav/gstavaudenc.c:
+ * ext/libav/gstavvidenc.c:
+ avenc: Stop using the removed inter_threshold field
+
+2014-01-03 16:27:11 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/libav/gstavvidenc.c:
+ avviddec rebase
+
+2014-01-03 16:26:10 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/libav/gstavauddec.c:
+ avauddec: Stop using AVCODEC_MAX_AUDIO_FRAME_SIZE
+ And properly use the have_data variable. It's a boolean.
+
+2014-01-03 16:25:39 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/libav/gstavdemux.c:
+ avdemux: Stop using r_frame_rate field
+ It was removed and quite meaningless anyway.
+ Use the average framerate instead.
+
+2014-01-03 16:24:28 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/libav/gstavvidenc.c:
+ avvidenc: Port to av_encode_video2()
+ av_encode_video() is deprecated and an ugly API anyway.
+
+2014-01-03 16:23:26 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst-libs/ext/libav:
+ libav: Update to libav master (libav 10 API)
+
+2013-12-27 12:06:28 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * configure.ac:
+ configure.ac: Remove warning when building against a system version of libav
+ Nowadays libav has proper releases and API/ABI guarantees.
+ We're not living in last decade.
+
+2013-12-22 22:35:12 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * autogen.sh:
+ * common:
+ Automatic update of common submodule
+ From dbedaa0 to d48bed3
+
+2013-12-15 21:17:26 -0800 Todd Agulnick <todd@agulnick.com>
+
+ * ext/libav/gstavcodecmap.c:
+ * ext/libav/gstavdeinterlace.c:
+ Some compiler warning fixes to satisfy XCode compiler
+ https://bugzilla.gnome.org/show_bug.cgi?id=720513
+
+2013-12-07 11:35:09 +0100 Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+ * ext/libav/gstavviddec.c:
+ avviddec: improve buffer handling and semantics
+ ... so as to focus on providing *a* buffer rather than one (too) tied
+ to a frame, in particular allowing multiple allocations related to a frame.
+ Fixes https://bugzilla.gnome.org/show_bug.cgi?id=697806
+
+2013-12-07 12:10:13 +0100 Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+ * ext/libav/gstavvidenc.c:
+ avvidenc: plug input_state leak
+
+2013-12-05 11:51:27 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * ext/libav/gstavviddec.c:
+ avviddec: Use new gst_video_decoder_set_needs_format() API
+
+2013-12-03 13:16:49 +0100 Christian Fredrik Kalager Schaller <uraeus@linuxrising.org>
+
+ * gst-libav.spec.in:
+ Update spec file with latest changes
+
+2013-12-02 20:21:34 +0100 Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+ * ext/libav/gstavviddec.c:
+ avviddec: only use upstream framerate if really specified
+ Fixes https://bugzilla.gnome.org/show_bug.cgi?id=704161
+
+2013-11-26 20:57:37 +0100 Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+ * ext/libav/gstavviddec.c:
+ avviddec: discard unused input frames
+ ... to avoid these piling up in list of pending frames.
+ Fixes https://bugzilla.gnome.org/show_bug.cgi?id=693772
+
+2013-11-26 20:55:43 +0100 Mark Nauwelaerts <mnauw@users.sourceforge.net>
+
+ * ext/libav/gstavviddec.c:
+ avviddec: really release frame at proper time
+ ... by also removing it from the pending list of frames,
+ where it may still be in if it has never been submitted to _finish.
+ This could happen if is a decode-only frame, or in skipped decoding
+ situation, ...
+ Fixes https://bugzilla.gnome.org/show_bug.cgi?id=693772
+
+2013-11-05 11:21:43 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * common:
+ Automatic update of common submodule
+ From 865aa20 to dbedaa0
+
+2013-11-04 23:20:17 +0000 Tim-Philipp Müller <tim@centricular.com>
+
+ * ext/libav/gstavcodecmap.c:
+ avaudec: don't put bogus 0 channel-mask on output caps for mono audio
+
+2013-10-26 09:34:30 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * ext/libav/gstavaudenc.c:
+ avaudenc: post better error message if experimental codecs don't work
+ https://bugzilla.gnome.org/show_bug.cgi?id=691617
+
+2013-10-26 09:09:28 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * ext/libav/gstavcodecmap.c:
+ codecmap: use TRUE for boolean fields in caps
+
+2013-10-15 09:28:08 +0200 Sebastian Dröge <slomo@circular-chaos.org>
+
+ * gst-libs/ext/libav:
+ libav: Update to v9.10
+
+2013-10-14 14:50:57 -0600 Greg Rutz <greg@gsr-tek.com>
+
+ * ext/libav/gstavaudenc.c:
+ * ext/libav/gstavaudenc.h:
+ * ext/libav/gstavcodecmap.c:
+ * ext/libav/gstavcodecmap.h:
+ * ext/libav/gstavvidenc.c:
+ * ext/libav/gstavvidenc.h:
+ avenc: Add compliance property
+ Add a new property to GstFFMpegVidEnc and GstFFMpegAudEnc to supply
+ the "strict compliance" value to AVCodecContext
+ https://bugzilla.gnome.org/show_bug.cgi?id=691617
+
+2013-10-03 15:25:30 +0100 Matthieu Bouron <matthieu.bouron@collabora.com>
+
+ * ext/libav/gstavcodecmap.c:
+ avcodecmap: Make avdec_mjpeg requires a parsed input
+ Actually avdec_mjpeg does not deal well with incomplete buffers and try
+ to decode incomplete frames. A parser which will also acts as
+ an accumulator needs to be inserted before it.
+ https://bugzilla.gnome.org/show_bug.cgi?id=709352
+
+2013-10-02 13:59:04 +0200 Sebastian Dröge <slomo@circular-chaos.org>
+
+ * ext/libav/gstavcodecmap.c:
+ avcodecmap: gst_value_can_intersect() does not do what you would think
+ Check for uniqueness differently now.
+
+2013-10-02 12:57:36 +0200 Sebastian Dröge <slomo@circular-chaos.org>
+
+ * ext/libav/gstavcodecmap.c:
+ avcodecmap: Only append values to the video/audio format lists if we don't have them already
+
+2013-10-02 12:52:35 +0200 Sebastian Dröge <slomo@circular-chaos.org>
+
+ * ext/libav/gstavviddec.c:
+ avviddec: Reset some more fields in ::stop()
+
+2013-10-02 12:51:40 +0200 Sebastian Dröge <slomo@circular-chaos.org>
+
+ * ext/libav/gstavviddec.c:
+ avviddec: Don't believe we're negotiated if negotiation failed
+ It can happen that negotiation fails during get_buffer(), but then
+ we don't retry later and never return NOT_NEGOTIATED upstream...
+ and instead run into assertions.
+
+2013-10-02 12:45:44 +0200 Sebastian Dröge <slomo@circular-chaos.org>
+
+ * ext/libav/gstavauddec.c:
+ avauddec: Don't believe we're negotiated if negotiation failed
+ It can happen that negotiation fails during get_buffer(), but then
+ we don't retry later and never return NOT_NEGOTIATED upstream...
+ and instead run into assertions.
+ https://bugzilla.gnome.org/show_bug.cgi?id=708769
+
+2013-10-01 22:38:32 +0200 Sebastian Dröge <slomo@circular-chaos.org>
+
+ * ext/libav/gstavcodecmap.c:
+ avenc: Choose 25 fps if we don't have any in the caps
+ Some encoders require a non-zero framerate to be configured properly
+ and just choosing something will make them not fail completely at
+ least.
+ https://bugzilla.gnome.org/show_bug.cgi?id=708732
+
+2013-09-23 15:19:51 +0200 Sebastian Dröge <slomo@circular-chaos.org>
+
+ * ext/libav/gstavcodecmap.c:
+ avcodecmap: Fix boolean expression to fix uninitialized usage of variables
+
+2013-09-23 15:08:18 +0200 Sebastian Dröge <slomo@circular-chaos.org>
+
+ * configure.ac:
+ configure: Chose right target-os for iOS
+
+2013-09-24 18:34:20 +0100 Tim-Philipp Müller <tim@centricular.net>
+
+ * common:
+ Automatic update of common submodule
+ From 6b03ba7 to 865aa20
+
+2013-09-24 15:06:03 +0200 Sebastian Dröge <slomo@circular-chaos.org>
+
+ * configure.ac:
+ configure: Actually use 1.3.0.1 as version to make configure happy
+
+2013-09-24 15:00:34 +0200 Sebastian Dröge <slomo@circular-chaos.org>
+
+ * configure.ac:
+ Back to development
+
=== release 1.2.0 ===
-2013-09-24 Sebastian Dröge <sebastian.droege@collabora.co.uk>
+2013-09-24 14:42:30 +0200 Sebastian Dröge <slomo@circular-chaos.org>
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
* configure.ac:
- releasing 1.2.0
+ * gst-libav.doap:
+ Release 1.2.0
2013-09-20 16:18:03 +0200 Edward Hervey <edward@collabora.com>
projects / platform / upstream / gstreamer.git / blobdiff