include/configs/woodburn_common.h

   1 /*
   2  * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
   3  *
   4  * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
   5  *
   6  * Configuration for the woodburn board.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __WOODBURN_COMMON_CONFIG_H
  12 #define __WOODBURN_COMMON_CONFIG_H
  13
  14 #include <asm/arch/imx-regs.h>
  15
  16  /* High Level Configuration Options */
  17 #define CONFIG_MX35
  18 #define CONFIG_MX35_HCLK_FREQ   24000000
  19 #define CONFIG_SYS_FSL_CLK
  20
  21 #define CONFIG_SYS_DCACHE_OFF
  22 #define CONFIG_SYS_CACHELINE_SIZE       32
  23
  24 #define CONFIG_DISPLAY_CPUINFO
  25
  26 /* Only in case the value is not present in mach-types.h */
  27 #ifndef MACH_TYPE_FLEA3
  28 #define MACH_TYPE_FLEA3                3668
  29 #endif
  30
  31 #define CONFIG_MACH_TYPE                MACH_TYPE_FLEA3
  32
  33 /* This is required to setup the ESDC controller */
  34
  35 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  36 #define CONFIG_REVISION_TAG
  37 #define CONFIG_SETUP_MEMORY_TAGS
  38 #define CONFIG_INITRD_TAG
  39
  40 /*
  41  * Size of malloc() pool
  42  */
  43 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  44
  45 /*
  46  * Hardware drivers
  47  */
  48 #define CONFIG_SYS_I2C
  49 #define CONFIG_SYS_I2C_MXC
  50 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  51 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  52 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  53 #define CONFIG_SYS_SPD_BUS_NUM          0
  54 #define CONFIG_MXC_SPI
  55 #define CONFIG_MXC_GPIO
  56
  57 /* PMIC Controller */
  58 #define CONFIG_POWER
  59 #define CONFIG_POWER_I2C
  60 #define CONFIG_POWER_FSL
  61 #define CONFIG_POWER_FSL_MC13892
  62 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x8
  63 #define CONFIG_RTC_MC13XXX
  64
  65 /* mmc driver */
  66 #define CONFIG_MMC
  67 #define CONFIG_GENERIC_MMC
  68 #define CONFIG_FSL_ESDHC
  69 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  70 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  71
  72 /*
  73  * UART (console)
  74  */
  75 #define CONFIG_MXC_UART
  76 #define CONFIG_MXC_UART_BASE    UART1_BASE
  77
  78 /* allow to overwrite serial and ethaddr */
  79 #define CONFIG_ENV_OVERWRITE
  80 #define CONFIG_CONS_INDEX       1
  81 #define CONFIG_BAUDRATE         115200
  82
  83 /*
  84  * Command definition
  85  */
  86 #define CONFIG_CMD_DATE
  87 #define CONFIG_BOOTP_SUBNETMASK
  88 #define CONFIG_BOOTP_GATEWAY
  89 #define CONFIG_BOOTP_DNS
  90
  91 #define CONFIG_CMD_NAND
  92 #define CONFIG_CMD_CACHE
  93
  94 #define CONFIG_CMD_MII
  95
  96 #define CONFIG_CMD_MMC
  97 #define CONFIG_DOS_PARTITION
  98 #define CONFIG_EFI_PARTITION
  99 #define CONFIG_CMD_EXT2
 100 #define CONFIG_CMD_FAT
 101
 102 #define CONFIG_MXC_GPIO
 103
 104 #define CONFIG_NET_RETRY_COUNT  100
 105
 106 #define CONFIG_BOOTDELAY        3
 107
 108 #define CONFIG_LOADADDR         0x80800000      /* loadaddr env var */
 109
 110 /*
 111  * Ethernet on SOC (FEC)
 112  */
 113 #define CONFIG_FEC_MXC
 114 #define IMX_FEC_BASE    FEC_BASE_ADDR
 115 #define CONFIG_PHYLIB
 116 #define CONFIG_PHY_MICREL
 117 #define CONFIG_FEC_MXC_PHYADDR  0x1
 118
 119 #define CONFIG_MII
 120 #define CONFIG_DISCOVER_PHY
 121
 122 #define CONFIG_ARP_TIMEOUT      200UL
 123
 124 /*
 125  * Miscellaneous configurable options
 126  */
 127 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 128 #define CONFIG_CMDLINE_EDITING
 129
 130 #define CONFIG_AUTO_COMPLETE
 131 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 132 /* Print Buffer Size */
 133 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 134 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 135 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 136
 137 #define CONFIG_SYS_MEMTEST_START        0       /* memtest works on */
 138 #define CONFIG_SYS_MEMTEST_END          0x10000
 139
 140 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 141
 142 /*
 143  * Stack sizes
 144  *
 145  * The stack sizes are set up in start.S using the settings below
 146  */
 147 #define CONFIG_STACKSIZE        (128 * 1024)    /* regular stack */
 148
 149 /*
 150  * Physical Memory Map
 151  */
 152 #define CONFIG_NR_DRAM_BANKS    1
 153 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 154 #define PHYS_SDRAM_1_SIZE       (256 * 1024 * 1024)
 155
 156 #define CONFIG_SYS_SDRAM_BASE           CSD0_BASE_ADDR
 157
 158 #define CONFIG_SYS_GBL_DATA_OFFSET      (LOW_LEVEL_SRAM_STACK - \
 159                                                 IRAM_BASE_ADDR - \
 160                                                 GENERATED_GBL_DATA_SIZE)
 161 #define CONFIG_SYS_INIT_SP_ADDR         (IRAM_BASE_ADDR + \
 162                                         CONFIG_SYS_GBL_DATA_OFFSET)
 163
 164 /*
 165  * MTD Command for mtdparts
 166  */
 167 #define CONFIG_CMD_MTDPARTS
 168 #define CONFIG_MTD_DEVICE
 169 #define CONFIG_FLASH_CFI_MTD
 170 #define CONFIG_MTD_PARTITIONS
 171 #define MTDIDS_DEFAULT          "nand0=mxc_nand,nor0=physmap-flash.0"
 172 #define MTDPARTS_DEFAULT        "mtdparts=mxc_nand:50m(root1)," \
 173                                 "32m(rootfb)," \
 174                                 "64m(pcache)," \
 175                                 "64m(app1)," \
 176                                 "10m(app2),-(spool);" \
 177                                 "physmap-flash.0:512k(u-boot),64k(env1)," \
 178                                 "64k(env2),3776k(kernel1),3776k(kernel2)"
 179
 180 /*
 181  * FLASH and environment organization
 182  */
 183 #define CONFIG_SYS_FLASH_BASE           CS0_BASE_ADDR
 184 #define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
 185 #define CONFIG_SYS_MAX_FLASH_SECT 512   /* max number of sectors on one chip */
 186 /* Monitor at beginning of flash */
 187 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 188 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 189
 190 #define CONFIG_ENV_SECT_SIZE    (128 * 1024)
 191 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 192
 193 /* Address and size of Redundant Environment Sector     */
 194 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 195 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 196
 197 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + \
 198                                 CONFIG_SYS_MONITOR_LEN)
 199
 200 #define CONFIG_ENV_IS_IN_FLASH
 201
 202 /*
 203  * CFI FLASH driver setup
 204  */
 205 #define CONFIG_SYS_FLASH_CFI            /* Flash memory is CFI compliant */
 206 #define CONFIG_FLASH_CFI_DRIVER
 207
 208 /* A non-standard buffered write algorithm */
 209 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* faster */
 210 #define CONFIG_SYS_FLASH_PROTECTION     /* Use hardware sector protection */
 211
 212 /*
 213  * NAND FLASH driver setup
 214  */
 215 #define CONFIG_NAND_MXC
 216 #define CONFIG_NAND_MXC_V1_1
 217 #define CONFIG_MXC_NAND_REGS_BASE       (NFC_BASE_ADDR)
 218 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 219 #define CONFIG_SYS_NAND_BASE            (NFC_BASE_ADDR)
 220 #define CONFIG_MXC_NAND_HWECC
 221 #define CONFIG_SYS_NAND_LARGEPAGE
 222
 223 #if 0
 224 #define CONFIG_MTD_DEBUG
 225 #define CONFIG_MTD_DEBUG_VERBOSE        7
 226 #endif
 227 #define CONFIG_SYS_NAND_ONFI_DETECTION
 228
 229 /*
 230  * Default environment and default scripts
 231  * to update uboot and load kernel
 232  */
 233
 234 #define CONFIG_HOSTNAME woodburn
 235 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 236         "netdev=eth0\0"                                                 \
 237         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 238                 "nfsroot=${serverip}:${rootpath}\0"                     \
 239         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 240         "addip_sta=setenv bootargs ${bootargs} "                        \
 241                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 242                 ":${hostname}:${netdev}:off panic=1\0"                  \
 243         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
 244         "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
 245                 "else run addip_sta;fi\0"       \
 246         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 247         "addtty=setenv bootargs ${bootargs}"                            \
 248                 " console=ttymxc0,${baudrate}\0"                        \
 249         "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
 250         "loadaddr=80800000\0"                                           \
 251         "kernel_addr_r=80800000\0"                                      \
 252         "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
 253         "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
 254         "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"      \
 255         "flash_self=run ramargs addip addtty addmtd addmisc;"           \
 256                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 257         "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
 258                 "bootm ${kernel_addr}\0"                                \
 259         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 260                 "run nfsargs addip addtty addmtd addmisc;"              \
 261                 "bootm ${kernel_addr_r}\0"                              \
 262         "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
 263                 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
 264         "net_self=if run net_self_load;then "                           \
 265                 "run ramargs addip addtty addmtd addmisc;"              \
 266                 "bootm ${kernel_addr_r} ${ramdisk_addr_r};"             \
 267                 "else echo Images not loades;fi\0"                      \
 268         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
 269         "load=tftp ${loadaddr} ${u-boot}\0"                             \
 270         "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
 271         "update=protect off ${uboot_addr} +80000;"                      \
 272                 "erase ${uboot_addr} +80000;"                           \
 273                 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"          \
 274         "upd=if run load;then echo Updating u-boot;if run update;"      \
 275                 "then echo U-Boot updated;"                             \
 276                         "else echo Error updating u-boot !;"            \
 277                         "echo Board without bootloader !!;"             \
 278                 "fi;"                                                   \
 279                 "else echo U-Boot not downloaded..exiting;fi\0"         \
 280         "bootcmd=run net_nfs\0"
 281
 282 #endif                          /* __CONFIG_H */