include/configs/taurus.h

   1 /*
   2  * Common board functions for Siemens TAURUS (AT91SAM9G20) based boards
   3  * (C) Copyright 2013 Siemens AG
   4  *
   5  * Based on:
   6  * U-Boot file: include/configs/at91sam9260ek.h
   7  *
   8  * (C) Copyright 2007-2008
   9  * Stelian Pop <stelian@popies.net>
  10  * Lead Tech Design <www.leadtechdesign.com>
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #ifndef __CONFIG_H
  16 #define __CONFIG_H
  17
  18 /*
  19  * SoC must be defined first, before hardware.h is included.
  20  * In this case SoC is defined in boards.cfg.
  21  */
  22 #include <asm/hardware.h>
  23 #include <linux/sizes.h>
  24
  25 #if defined(CONFIG_SPL_BUILD)
  26 #define CONFIG_SYS_THUMB_BUILD
  27 #define CONFIG_SYS_ICACHE_OFF
  28 #define CONFIG_SYS_DCACHE_OFF
  29 #endif
  30 /*
  31  * Warning: changing CONFIG_SYS_TEXT_BASE requires
  32  * adapting the initial boot program.
  33  * Since the linker has to swallow that define, we must use a pure
  34  * hex number here!
  35  */
  36
  37 #define CONFIG_SYS_TEXT_BASE            0x21000000
  38
  39 /* ARM asynchronous clock */
  40 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768           /* slow clock xtal */
  41 #define CONFIG_SYS_AT91_MAIN_CLOCK      18432000        /* main clock xtal */
  42
  43 /* Misc CPU related */
  44 #define CONFIG_ARCH_CPU_INIT
  45 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  46 #define CONFIG_SETUP_MEMORY_TAGS
  47 #define CONFIG_INITRD_TAG
  48 #define CONFIG_SKIP_LOWLEVEL_INIT
  49 #define CONFIG_BOARD_EARLY_INIT_F
  50 #define CONFIG_DISPLAY_CPUINFO
  51
  52 #define CONFIG_CMD_BOOTZ
  53
  54 /* general purpose I/O */
  55 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
  56 #define CONFIG_AT91_GPIO
  57 #define CONFIG_AT91_GPIO_PULLUP 1       /* keep pullups on peripheral pins */
  58
  59 /* serial console */
  60 #define CONFIG_ATMEL_USART
  61 #define CONFIG_USART_BASE               ATMEL_BASE_DBGU
  62 #define CONFIG_USART_ID                 ATMEL_ID_SYS
  63 #define CONFIG_BAUDRATE                 115200
  64
  65 #define CONFIG_BOOTDELAY        3
  66
  67 /*
  68  * Command line configuration.
  69  */
  70 #define CONFIG_CMD_NAND
  71
  72 /*
  73  * SDRAM: 1 bank, min 32, max 128 MB
  74  * Initialized before u-boot gets started.
  75  */
  76 #define CONFIG_NR_DRAM_BANKS            1
  77 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS1
  78 #define CONFIG_SYS_SDRAM_SIZE           (128 * SZ_1M)
  79
  80 /*
  81  * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
  82  * leaving the correct space for initial global data structure above
  83  * that address while providing maximum stack area below.
  84  */
  85 #define CONFIG_SYS_INIT_SP_ADDR \
  86         (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
  87
  88 /* NAND flash */
  89 #ifdef CONFIG_CMD_NAND
  90 #define CONFIG_NAND_ATMEL
  91 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  92 #define CONFIG_SYS_NAND_BASE            ATMEL_BASE_CS3
  93 #define CONFIG_SYS_NAND_DBW_8
  94 #define CONFIG_SYS_NAND_MASK_ALE        (1 << 21)
  95 #define CONFIG_SYS_NAND_MASK_CLE        (1 << 22)
  96 #define CONFIG_SYS_NAND_ENABLE_PIN      AT91_PIN_PC14
  97 #define CONFIG_SYS_NAND_READY_PIN       AT91_PIN_PC13
  98 #endif
  99
 100 /* NOR flash - no real flash on this board */
 101 #define CONFIG_SYS_NO_FLASH                     1
 102
 103 /* Ethernet */
 104 #define CONFIG_MACB
 105 #define CONFIG_RMII
 106 #define CONFIG_AT91_WANTS_COMMON_PHY
 107
 108 #define CONFIG_AT91SAM9_WATCHDOG
 109 #define CONFIG_AT91_HW_WDT_TIMEOUT      15
 110 #if !defined(CONFIG_SPL_BUILD)
 111 /* Enable the watchdog */
 112 #define CONFIG_HW_WATCHDOG
 113 #endif
 114
 115 /* USB */
 116 #if defined(CONFIG_BOARD_TAURUS)
 117 #define CONFIG_USB_ATMEL
 118 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 119 #define CONFIG_USB_OHCI_NEW
 120 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 121 #define CONFIG_SYS_USB_OHCI_REGS_BASE           0x00500000
 122 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9260"
 123 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      2
 124 #define CONFIG_USB_STORAGE
 125
 126 /* USB DFU support */
 127 #define CONFIG_CMD_MTDPARTS
 128 #define CONFIG_MTD_DEVICE
 129 #define CONFIG_MTD_PARTITIONS
 130
 131 #define CONFIG_USB_GADGET_AT91
 132
 133 /* DFU class support */
 134 #define CONFIG_CMD_DFU
 135 #define CONFIG_USB_FUNCTION_DFU
 136 #define CONFIG_DFU_NAND
 137 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    (SZ_1M)
 138 #define DFU_MANIFEST_POLL_TIMEOUT       25000
 139
 140 #define CONFIG_SYS_CACHELINE_SIZE       SZ_8K
 141 #endif
 142
 143 /* SPI EEPROM */
 144 #define CONFIG_SPI
 145 #define CONFIG_ATMEL_SPI
 146 #define TAURUS_SPI_MASK (1 << 4)
 147 #define TAURUS_SPI_CS_PIN       AT91_PIN_PA3
 148
 149 #if defined(CONFIG_SPL_BUILD)
 150 /* SPL related */
 151 #undef CONFIG_SPL_OS_BOOT               /* Not supported by existing map */
 152 #define CONFIG_SPL_SPI_SUPPORT
 153 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 154 #define CONFIG_SPL_SPI_LOAD
 155 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
 156
 157 #define CONFIG_SF_DEFAULT_BUS 0
 158 #define CONFIG_SF_DEFAULT_SPEED 1000000
 159 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
 160 #endif
 161
 162 /* load address */
 163 #define CONFIG_SYS_LOAD_ADDR                    0x22000000
 164
 165 /* bootstrap in spi flash , u-boot + env + linux in nandflash */
 166 #define CONFIG_ENV_IS_IN_NAND
 167 #define CONFIG_ENV_OFFSET               0x100000
 168 #define CONFIG_ENV_OFFSET_REDUND        0x180000
 169 #define CONFIG_ENV_SIZE         (SZ_128K)       /* 1 sector = 128 kB */
 170 #define CONFIG_BOOTCOMMAND      "nand read 0x22000000 0x200000 0x300000; bootm"
 171
 172 #if defined(CONFIG_BOARD_TAURUS)
 173 #define CONFIG_BOOTARGS_TAURUS                                          \
 174         "console=ttyS0,115200 earlyprintk "                             \
 175         "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
 176         "256k(env),256k(env_redundant),256k(spare),"                    \
 177         "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
 178         "root=/dev/mtdblock7 rw rootfstype=jffs2"
 179 #endif
 180
 181 #if defined(CONFIG_BOARD_AXM)
 182 #define CONFIG_BOOTARGS_AXM                                             \
 183         "\0"    \
 184         "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:"   \
 185         "${gatewayip}:${netmask}:${hostname}:${netdev}::off\0"          \
 186         "addtest=setenv bootargs ${bootargs} loglevel=4 test\0"         \
 187         "baudrate=115200\0"                                             \
 188         "boot_file=setenv bootfile /${project_dir}/kernel/uImage\0"     \
 189         "boot_retries=0\0"                                              \
 190         "bootcmd=run flash_self\0"                                      \
 191         "bootdelay=3\0"                                                 \
 192         "ethact=macb0\0"                                                \
 193         "flash_nfs=run nand_kernel;run nfsargs;run addip;upgrade_available;"\
 194         "bootm ${kernel_ram};reset\0"                                   \
 195         "flash_self=run nand_kernel;run setbootargs;upgrade_available;" \
 196         "bootm ${kernel_ram};reset\0"                                   \
 197         "flash_self_test=run nand_kernel;run setbootargs addtest; "     \
 198         "upgrade_available;bootm ${kernel_ram};reset\0"                 \
 199         "hostname=systemone\0"                                          \
 200         "kernel_Off=0x00200000\0"                                       \
 201         "kernel_Off_fallback=0x03800000\0"                              \
 202         "kernel_ram=0x21500000\0"                                       \
 203         "kernel_size=0x00400000\0"                                      \
 204         "kernel_size_fallback=0x00400000\0"                             \
 205         "loads_echo=1\0"                                                \
 206         "nand_kernel=nand read.e ${kernel_ram} ${kernel_Off} "          \
 207                 "${kernel_size}\0"                                      \
 208         "net_nfs=run boot_file;tftp ${kernel_ram} ${bootfile};"         \
 209         "run nfsargs;run addip;upgrade_available;bootm "                \
 210                 "${kernel_ram};reset\0"                                 \
 211         "netdev=eth0\0"                                                 \
 212         "nfsargs=run root_path;setenv bootargs ${bootargs} "            \
 213         "root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "             \
 214         "at91sam9_wdt.wdt_timeout=16\0"                                 \
 215         "partitionset_active=A\0"                                       \
 216         "preboot=echo;echo Type 'run flash_self' to use kernel and root "\
 217         "filesystem on memory;echo Type 'run flash_nfs' to use kernel " \
 218         "from memory and root filesystem over NFS;echo Type 'run net_nfs' "\
 219         "to get Kernel over TFTP and mount root filesystem over NFS;echo\0"\
 220         "project_dir=systemone\0"                                       \
 221         "root_path=setenv rootpath /home/projects/${project_dir}/rootfs\0"\
 222         "rootfs=/dev/mtdblock5\0"                                       \
 223         "rootfs_fallback=/dev/mtdblock7\0"                              \
 224         "setbootargs=setenv bootargs ${bootargs} console=ttyMTD,mtdoops "\
 225                 "root=${rootfs} rootfstype=jffs2 panic=7 "              \
 226                 "at91sam9_wdt.wdt_timeout=16\0"                         \
 227         "stderr=serial\0"                                               \
 228         "stdin=serial\0"                                                \
 229         "stdout=serial\0"                                               \
 230         "upgrade_available=0\0"
 231 #endif
 232
 233 #if defined(CONFIG_BOARD_TAURUS)
 234 #define CONFIG_BOOTARGS         CONFIG_BOOTARGS_TAURUS
 235 #endif
 236
 237 #if defined(CONFIG_BOARD_AXM)
 238 #define CONFIG_BOOTARGS         CONFIG_BOOTARGS_AXM
 239 #endif
 240
 241 #define CONFIG_SYS_CBSIZE               256
 242 #define CONFIG_SYS_MAXARGS              16
 243 #define CONFIG_SYS_PBSIZE \
 244         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 245 #define CONFIG_SYS_LONGHELP
 246 #define CONFIG_CMDLINE_EDITING
 247 #define CONFIG_AUTO_COMPLETE
 248
 249 /*
 250  * Size of malloc() pool
 251  */
 252 #define CONFIG_SYS_MALLOC_LEN \
 253         ROUND(3 * CONFIG_ENV_SIZE + SZ_4M, 0x1000)
 254
 255 /* Defines for SPL */
 256 #define CONFIG_SPL_FRAMEWORK
 257 #define CONFIG_SPL_TEXT_BASE            0x0
 258 #define CONFIG_SPL_MAX_SIZE             (31 * SZ_512)
 259 #define CONFIG_SPL_STACK                (ATMEL_BASE_SRAM1 + SZ_16K)
 260 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE - \
 261                                         CONFIG_SYS_MALLOC_LEN)
 262 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 263
 264 #define CONFIG_SPL_BSS_START_ADDR       CONFIG_SPL_MAX_SIZE
 265 #define CONFIG_SPL_BSS_MAX_SIZE         (3 * SZ_512)
 266
 267 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 268 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 269 #define CONFIG_SPL_SERIAL_SUPPORT
 270
 271 #define CONFIG_SPL_BOARD_INIT
 272 #define CONFIG_SPL_GPIO_SUPPORT
 273 #define CONFIG_SYS_NAND_ENABLE_PIN_SPL  (2*32 + 14)
 274 #define CONFIG_SPL_NAND_SUPPORT
 275 #define CONFIG_SYS_USE_NANDFLASH        1
 276 #define CONFIG_SPL_NAND_DRIVERS
 277 #define CONFIG_SPL_NAND_BASE
 278 #define CONFIG_SPL_NAND_ECC
 279 #define CONFIG_SPL_NAND_RAW_ONLY
 280 #define CONFIG_SPL_NAND_SOFTECC
 281 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x20000
 282 #define CONFIG_SYS_NAND_U_BOOT_SIZE     SZ_512K
 283 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 284 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
 285 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 286
 287 #define CONFIG_SYS_NAND_SIZE            (256 * SZ_1M)
 288 #define CONFIG_SYS_NAND_PAGE_SIZE       SZ_2K
 289 #define CONFIG_SYS_NAND_BLOCK_SIZE      (SZ_128K)
 290 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
 291                                          CONFIG_SYS_NAND_PAGE_SIZE)
 292 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 293 #define CONFIG_SYS_NAND_ECCSIZE         256
 294 #define CONFIG_SYS_NAND_ECCBYTES        3
 295 #define CONFIG_SYS_NAND_OOBSIZE         64
 296 #define CONFIG_SYS_NAND_ECCPOS          { 40, 41, 42, 43, 44, 45, 46, 47, \
 297                                           48, 49, 50, 51, 52, 53, 54, 55, \
 298                                           56, 57, 58, 59, 60, 61, 62, 63, }
 299
 300 #define CONFIG_SPL_ATMEL_SIZE
 301 #define CONFIG_SYS_MASTER_CLOCK         132096000
 302 #define AT91_PLL_LOCK_TIMEOUT           1000000
 303 #define CONFIG_SYS_AT91_PLLA            0x202A3F01
 304 #define CONFIG_SYS_MCKR                 0x1300
 305 #define CONFIG_SYS_MCKR_CSS             (0x02 | CONFIG_SYS_MCKR)
 306 #define CONFIG_SYS_AT91_PLLB            0x10193F05
 307
 308 #endif