include/configs/mx23_olinuxino.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Marek Vasut <marex@denx.de>
   4  */
   5 #ifndef __CONFIGS_MX23_OLINUXINO_H__
   6 #define __CONFIGS_MX23_OLINUXINO_H__
   7
   8 /* System configurations */
   9 #define CONFIG_MACH_TYPE        4105
  10
  11 /* U-Boot Commands */
  12
  13 /* Memory configuration */
  14 #define PHYS_SDRAM_1                    0x40000000      /* Base address */
  15 #define PHYS_SDRAM_1_SIZE               0x08000000      /* Max 128 MB RAM */
  16 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  17
  18 /* Status LED */
  19
  20 /* USB */
  21 #ifdef CONFIG_CMD_USB
  22 #define CONFIG_EHCI_MXS_PORT0
  23 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
  24 #endif
  25
  26 /* Ethernet */
  27
  28 /* Booting Linux */
  29 #define CONFIG_BOOTFILE         "uImage"
  30
  31 /* Extra Environment */
  32 #define CONFIG_EXTRA_ENV_SETTINGS \
  33         "update_sd_firmware_filename=u-boot.sd\0" \
  34         "update_sd_firmware="           /* Update the SD firmware partition */ \
  35                 "if mmc rescan ; then " \
  36                 "if tftp ${update_sd_firmware_filename} ; then " \
  37                 "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block size */ \
  38                 "setexpr fw_sz ${fw_sz} + 1 ; " \
  39                 "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
  40                 "fi ; " \
  41                 "fi\0" \
  42         "script=boot.scr\0"     \
  43         "uimage=uImage\0" \
  44         "console=ttyAMA0\0" \
  45         "fdt_file=imx23-olinuxino.dtb\0" \
  46         "fdt_addr=0x41000000\0" \
  47         "boot_fdt=try\0" \
  48         "ip_dyn=yes\0" \
  49         "mmcdev=0\0" \
  50         "mmcpart=2\0" \
  51         "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
  52         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  53                 "root=${mmcroot}\0" \
  54         "loadbootscript="  \
  55                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  56         "bootscript=echo Running bootscript from mmc ...; "     \
  57                 "source\0" \
  58         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
  59         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  60         "mmcboot=echo Booting from mmc ...; " \
  61                 "run mmcargs; " \
  62                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  63                         "if run loadfdt; then " \
  64                                 "bootm ${loadaddr} - ${fdt_addr}; " \
  65                         "else " \
  66                                 "if test ${boot_fdt} = try; then " \
  67                                         "bootm; " \
  68                                 "else " \
  69                                         "echo WARN: Cannot load the DT; " \
  70                                 "fi; " \
  71                         "fi; " \
  72                 "else " \
  73                         "bootm; " \
  74                 "fi;\0" \
  75         "netargs=setenv bootargs console=${console},${baudrate} " \
  76                 "root=/dev/nfs " \
  77                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  78         "netboot=echo Booting from net ...; " \
  79                 "usb start; " \
  80                 "run netargs; " \
  81                 "if test ${ip_dyn} = yes; then " \
  82                         "setenv get_cmd dhcp; " \
  83                 "else " \
  84                         "setenv get_cmd tftp; " \
  85                 "fi; " \
  86                 "${get_cmd} ${uimage}; " \
  87                 "if test ${boot_fdt} = yes; then " \
  88                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
  89                                 "bootm ${loadaddr} - ${fdt_addr}; " \
  90                         "else " \
  91                                 "if test ${boot_fdt} = try; then " \
  92                                         "bootm; " \
  93                                 "else " \
  94                                         "echo WARN: Cannot load the DT; " \
  95                                 "fi;" \
  96                         "fi; " \
  97                 "else " \
  98                         "bootm; " \
  99                 "fi;\0"
 100
 101 #define CONFIG_BOOTCOMMAND \
 102         "mmc dev ${mmcdev}; if mmc rescan; then " \
 103                 "if run loadbootscript; then " \
 104                         "run bootscript; " \
 105                 "else " \
 106                         "if run loaduimage; then " \
 107                                 "run mmcboot; " \
 108                         "else run netboot; " \
 109                         "fi; " \
 110                 "fi; " \
 111         "else run netboot; fi"
 112
 113 /* The rest of the configuration is shared */
 114 #include <configs/mxs.h>
 115
 116 #endif /* __CONFIGS_MX23_OLINUXINO_H__ */