include/configs/ls1021atwr.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2014 Freescale Semiconductor, Inc.
   4  * Copyright 2019 NXP
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_ARMV7_SECURE_BASE        OCRAM_BASE_S_ADDR
  11
  12 #define CONFIG_SYS_FSL_CLK
  13
  14 #define CONFIG_DEEP_SLEEP
  15
  16 #define CONFIG_SYS_INIT_RAM_ADDR        OCRAM_BASE_ADDR
  17 #define CONFIG_SYS_INIT_RAM_SIZE        OCRAM_SIZE
  18
  19 #define CONFIG_SYS_CLK_FREQ             100000000
  20
  21 #define DDR_SDRAM_CFG                   0x470c0008
  22 #define DDR_CS0_BNDS                    0x008000bf
  23 #define DDR_CS0_CONFIG                  0x80014302
  24 #define DDR_TIMING_CFG_0                0x50550004
  25 #define DDR_TIMING_CFG_1                0xbcb38c56
  26 #define DDR_TIMING_CFG_2                0x0040d120
  27 #define DDR_TIMING_CFG_3                0x010e1000
  28 #define DDR_TIMING_CFG_4                0x00000001
  29 #define DDR_TIMING_CFG_5                0x03401400
  30 #define DDR_SDRAM_CFG_2                 0x00401010
  31 #define DDR_SDRAM_MODE                  0x00061c60
  32 #define DDR_SDRAM_MODE_2                0x00180000
  33 #define DDR_SDRAM_INTERVAL              0x18600618
  34 #define DDR_DDR_WRLVL_CNTL              0x8655f605
  35 #define DDR_DDR_WRLVL_CNTL_2            0x05060607
  36 #define DDR_DDR_WRLVL_CNTL_3            0x05050505
  37 #define DDR_DDR_CDR1                    0x80040000
  38 #define DDR_DDR_CDR2                    0x00000001
  39 #define DDR_SDRAM_CLK_CNTL              0x02000000
  40 #define DDR_DDR_ZQ_CNTL                 0x89080600
  41 #define DDR_CS0_CONFIG_2                0
  42 #define DDR_SDRAM_CFG_MEM_EN            0x80000000
  43 #define SDRAM_CFG2_D_INIT               0x00000010
  44 #define DDR_CDR2_VREF_TRAIN_EN          0x00000080
  45 #define SDRAM_CFG2_FRC_SR               0x80000000
  46 #define SDRAM_CFG_BI                    0x00000001
  47
  48 #ifdef CONFIG_SD_BOOT
  49 #ifdef CONFIG_NXP_ESBC
  50 /*
  51  * HDR would be appended at end of image and copied to DDR along
  52  * with U-Boot image.
  53  */
  54 #define CONFIG_U_BOOT_HDR_SIZE                          (16 << 10)
  55 #endif /* ifdef CONFIG_NXP_ESBC */
  56
  57 #define CONFIG_SPL_MAX_SIZE             0x1a000
  58 #define CONFIG_SPL_STACK                0x1001d000
  59 #define CONFIG_SPL_PAD_TO               0x1c000
  60
  61 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
  62                 CONFIG_SYS_MONITOR_LEN)
  63 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  64 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
  65 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  66
  67 #ifdef CONFIG_U_BOOT_HDR_SIZE
  68 /*
  69  * HDR would be appended at end of image and copied to DDR along
  70  * with U-Boot image. Here u-boot max. size is 512K. So if binary
  71  * size increases then increase this size in case of secure boot as
  72  * it uses raw u-boot image instead of fit image.
  73  */
  74 #define CONFIG_SYS_MONITOR_LEN          (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
  75 #else
  76 #define CONFIG_SYS_MONITOR_LEN          0x100000
  77 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
  78 #endif
  79
  80 #define PHYS_SDRAM                      0x80000000
  81 #define PHYS_SDRAM_SIZE                 (1u * 1024 * 1024 * 1024)
  82
  83 #define CONFIG_SYS_DDR_SDRAM_BASE      0x80000000UL
  84 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
  85
  86 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
  87
  88 /*
  89  * IFC Definitions
  90  */
  91 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
  92 #define CONFIG_SYS_FLASH_BASE           0x60000000
  93 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
  94
  95 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  96 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
  97                                 CSPR_PORT_SIZE_16 | \
  98                                 CSPR_MSEL_NOR | \
  99                                 CSPR_V)
 100 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 101
 102 /* NOR Flash Timing Params */
 103 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 104                                         CSOR_NOR_TRHZ_80)
 105 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 106                                         FTIM0_NOR_TEADC(0x5) | \
 107                                         FTIM0_NOR_TAVDS(0x0) | \
 108                                         FTIM0_NOR_TEAHC(0x5))
 109 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 110                                         FTIM1_NOR_TRAD_NOR(0x1A) | \
 111                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 112 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 113                                         FTIM2_NOR_TCH(0x4) | \
 114                                         FTIM2_NOR_TWP(0x1c) | \
 115                                         FTIM2_NOR_TWPH(0x0e))
 116 #define CONFIG_SYS_NOR_FTIM3            0
 117
 118 #define CONFIG_SYS_FLASH_QUIET_TEST
 119 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 120
 121 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 122 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 123 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 124 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 125
 126 #define CONFIG_SYS_FLASH_EMPTY_INFO
 127 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 128
 129 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 130 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 131 #endif
 132
 133 /* CPLD */
 134
 135 #define CONFIG_SYS_CPLD_BASE    0x7fb00000
 136 #define CPLD_BASE_PHYS          CONFIG_SYS_CPLD_BASE
 137
 138 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 139 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
 140                                         CSPR_PORT_SIZE_8 | \
 141                                         CSPR_MSEL_GPCM | \
 142                                         CSPR_V)
 143 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 144 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 145                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 146                                         CSOR_NOR_TRHZ_80)
 147
 148 /* CPLD Timing parameters for IFC GPCM */
 149 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xf) | \
 150                                         FTIM0_GPCM_TEADC(0xf) | \
 151                                         FTIM0_GPCM_TEAHC(0xf))
 152 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0xff) | \
 153                                         FTIM1_GPCM_TRAD(0x3f))
 154 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0xf) | \
 155                                         FTIM2_GPCM_TCH(0xf) | \
 156                                         FTIM2_GPCM_TWP(0xff))
 157 #define CONFIG_SYS_FPGA_FTIM3           0x0
 158 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 159 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 160 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 161 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 162 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 163 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 164 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 165 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 166 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 167 #define CONFIG_SYS_CSPR1                CONFIG_SYS_FPGA_CSPR
 168 #define CONFIG_SYS_AMASK1               CONFIG_SYS_FPGA_AMASK
 169 #define CONFIG_SYS_CSOR1                CONFIG_SYS_FPGA_CSOR
 170 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_FPGA_FTIM0
 171 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_FPGA_FTIM1
 172 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_FPGA_FTIM2
 173 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_FPGA_FTIM3
 174
 175 /*
 176  * Serial Port
 177  */
 178 #ifdef CONFIG_LPUART
 179 #define CONFIG_LPUART_32B_REG
 180 #else
 181 #define CONFIG_SYS_NS16550_SERIAL
 182 #ifndef CONFIG_DM_SERIAL
 183 #define CONFIG_SYS_NS16550_REG_SIZE     1
 184 #endif
 185 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 186 #endif
 187
 188 /*
 189  * I2C
 190  */
 191
 192 /* GPIO */
 193
 194 /* EEPROM */
 195 #define CONFIG_SYS_I2C_EEPROM_NXID
 196 #define CONFIG_SYS_EEPROM_BUS_NUM               1
 197
 198 /*
 199  * MMC
 200  */
 201
 202 /*
 203  * Video
 204  */
 205 #ifdef CONFIG_VIDEO_FSL_DCU_FB
 206 #define CONFIG_VIDEO_LOGO
 207 #define CONFIG_VIDEO_BMP_LOGO
 208
 209 #define CONFIG_FSL_DCU_SII9022A
 210 #define CONFIG_SYS_I2C_DVI_BUS_NUM      1
 211 #define CONFIG_SYS_I2C_DVI_ADDR         0x39
 212 #endif
 213
 214 /*
 215  * eTSEC
 216  */
 217
 218 #ifdef CONFIG_TSEC_ENET
 219 #define CONFIG_ETHPRIME                 "ethernet@2d10000"
 220 #endif
 221
 222 /* PCIe */
 223 #define CONFIG_PCIE1            /* PCIE controller 1 */
 224 #define CONFIG_PCIE2            /* PCIE controller 2 */
 225
 226 #ifdef CONFIG_PCI
 227 #define CONFIG_PCI_SCAN_SHOW
 228 #endif
 229
 230 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 231 #define CONFIG_LAYERSCAPE_NS_ACCESS
 232 #define CONFIG_SMP_PEN_ADDR             0x01ee0200
 233 #define COUNTER_FREQUENCY               12500000
 234
 235 #define CONFIG_HWCONFIG
 236 #define HWCONFIG_BUFFER_SIZE            256
 237
 238 #define CONFIG_FSL_DEVICE_DISABLE
 239
 240 #define BOOT_TARGET_DEVICES(func) \
 241         func(MMC, mmc, 0) \
 242         func(USB, usb, 0) \
 243         func(DHCP, dhcp, na)
 244 #include <config_distro_bootcmd.h>
 245
 246 #ifdef CONFIG_LPUART
 247 #define CONFIG_EXTRA_ENV_SETTINGS       \
 248         "bootargs=root=/dev/ram0 rw console=ttyLP0,115200 "     \
 249                 "cma=64M@0x0-0xb0000000\0" \
 250         "initrd_high=0xffffffff\0"      \
 251         "fdt_addr=0x64f00000\0"         \
 252         "kernel_addr=0x65000000\0"      \
 253         "scriptaddr=0x80000000\0"       \
 254         "scripthdraddr=0x80080000\0"    \
 255         "fdtheader_addr_r=0x80100000\0" \
 256         "kernelheader_addr_r=0x80200000\0"      \
 257         "kernel_addr_r=0x81000000\0"    \
 258         "fdt_addr_r=0x90000000\0"       \
 259         "ramdisk_addr_r=0xa0000000\0"   \
 260         "load_addr=0xa0000000\0"        \
 261         "kernel_size=0x2800000\0"       \
 262         "kernel_addr_sd=0x8000\0"       \
 263         "kernel_size_sd=0x14000\0"      \
 264         "othbootargs=cma=64M@0x0-0xb0000000\0"  \
 265         BOOTENV                         \
 266         "boot_scripts=ls1021atwr_boot.scr\0"    \
 267         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 268                 "scan_dev_for_boot_part="       \
 269                         "part list ${devtype} ${devnum} devplist; "     \
 270                         "env exists devplist || setenv devplist 1; "    \
 271                         "for distro_bootpart in ${devplist}; do "       \
 272                         "if fstype ${devtype} "                         \
 273                                 "${devnum}:${distro_bootpart} "         \
 274                                 "bootfstype; then "                     \
 275                                 "run scan_dev_for_boot; "               \
 276                         "fi; "                  \
 277                 "done\0"                        \
 278         "scan_dev_for_boot="                              \
 279                 "echo Scanning ${devtype} "               \
 280                                 "${devnum}:${distro_bootpart}...; "  \
 281                 "for prefix in ${boot_prefixes}; do "     \
 282                         "run scan_dev_for_scripts; "      \
 283                 "done;"                                   \
 284                 "\0"                                      \
 285         "boot_a_script="                                  \
 286                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 287                         "${scriptaddr} ${prefix}${script}; "    \
 288                 "env exists secureboot && load ${devtype} "     \
 289                         "${devnum}:${distro_bootpart} "         \
 290                         "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
 291                         "env exists secureboot "        \
 292                         "&& esbc_validate ${scripthdraddr};"    \
 293                 "source ${scriptaddr}\0"          \
 294         "installer=load mmc 0:2 $load_addr "    \
 295                 "/flex_installer_arm32.itb; "           \
 296                 "bootm $load_addr#ls1021atwr\0" \
 297         "qspi_bootcmd=echo Trying load from qspi..;"    \
 298                 "sf probe && sf read $load_addr "       \
 299                 "$kernel_addr $kernel_size && bootm $load_addr#$board\0"        \
 300         "nor_bootcmd=echo Trying load from nor..;"      \
 301                 "cp.b $kernel_addr $load_addr "         \
 302                 "$kernel_size && bootm $load_addr#$board\0"
 303 #else
 304 #define CONFIG_EXTRA_ENV_SETTINGS       \
 305         "bootargs=root=/dev/ram0 rw console=ttyS0,115200 "      \
 306                 "cma=64M@0x0-0xb0000000\0" \
 307         "initrd_high=0xffffffff\0"      \
 308         "fdt_addr=0x64f00000\0"         \
 309         "kernel_addr=0x61000000\0"      \
 310         "kernelheader_addr=0x60800000\0"        \
 311         "scriptaddr=0x80000000\0"       \
 312         "scripthdraddr=0x80080000\0"    \
 313         "fdtheader_addr_r=0x80100000\0" \
 314         "kernelheader_addr_r=0x80200000\0"      \
 315         "kernel_addr_r=0x81000000\0"    \
 316         "kernelheader_size=0x40000\0"   \
 317         "fdt_addr_r=0x90000000\0"       \
 318         "ramdisk_addr_r=0xa0000000\0"   \
 319         "load_addr=0xa0000000\0"        \
 320         "kernel_size=0x2800000\0"       \
 321         "kernel_addr_sd=0x8000\0"       \
 322         "kernel_size_sd=0x14000\0"      \
 323         "kernelhdr_addr_sd=0x4000\0"            \
 324         "kernelhdr_size_sd=0x10\0"              \
 325         "othbootargs=cma=64M@0x0-0xb0000000\0"  \
 326         BOOTENV                         \
 327         "boot_scripts=ls1021atwr_boot.scr\0"    \
 328         "boot_script_hdr=hdr_ls1021atwr_bs.out\0"       \
 329                 "scan_dev_for_boot_part="       \
 330                         "part list ${devtype} ${devnum} devplist; "     \
 331                         "env exists devplist || setenv devplist 1; "    \
 332                         "for distro_bootpart in ${devplist}; do "       \
 333                         "if fstype ${devtype} "                         \
 334                                 "${devnum}:${distro_bootpart} "         \
 335                                 "bootfstype; then "                     \
 336                                 "run scan_dev_for_boot; "               \
 337                         "fi; "                  \
 338                 "done\0"                        \
 339         "scan_dev_for_boot="                              \
 340                 "echo Scanning ${devtype} "               \
 341                                 "${devnum}:${distro_bootpart}...; "  \
 342                 "for prefix in ${boot_prefixes}; do "     \
 343                         "run scan_dev_for_scripts; "      \
 344                 "done;"                                   \
 345                 "\0"                                      \
 346         "boot_a_script="                                  \
 347                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
 348                         "${scriptaddr} ${prefix}${script}; "    \
 349                 "env exists secureboot && load ${devtype} "     \
 350                         "${devnum}:${distro_bootpart} "         \
 351                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
 352                         "&& esbc_validate ${scripthdraddr};"    \
 353                 "source ${scriptaddr}\0"          \
 354         "qspi_bootcmd=echo Trying load from qspi..;"    \
 355                 "sf probe && sf read $load_addr "       \
 356                 "$kernel_addr $kernel_size; env exists secureboot "     \
 357                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
 358                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 359                 "bootm $load_addr#$board\0" \
 360         "nor_bootcmd=echo Trying load from nor..;"      \
 361                 "cp.b $kernel_addr $load_addr "         \
 362                 "$kernel_size; env exists secureboot "  \
 363                 "&& cp.b $kernelheader_addr $kernelheader_addr_r "      \
 364                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
 365                 "bootm $load_addr#$board\0"     \
 366         "sd_bootcmd=echo Trying load from SD ..;"       \
 367                 "mmcinfo && mmc read $load_addr "       \
 368                 "$kernel_addr_sd $kernel_size_sd && "   \
 369                 "env exists secureboot && mmc read $kernelheader_addr_r "               \
 370                 "$kernelhdr_addr_sd $kernelhdr_size_sd "                \
 371                 " && esbc_validate ${kernelheader_addr_r};"     \
 372                 "bootm $load_addr#$board\0"
 373 #endif
 374
 375 /*
 376  * Miscellaneous configurable options
 377  */
 378 #define CONFIG_SYS_BOOTMAPSZ            (256 << 20)
 379
 380 #define CONFIG_LS102XA_STREAM_ID
 381
 382 #define CONFIG_SYS_INIT_SP_OFFSET \
 383         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 384 #define CONFIG_SYS_INIT_SP_ADDR \
 385         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 386
 387 #ifdef CONFIG_SPL_BUILD
 388 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 389 #else
 390 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 391 #endif
 392
 393 /*
 394  * Environment
 395  */
 396
 397 #include <asm/fsl_secure_boot.h>
 398 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 399
 400 #endif