include/configs/flea3.h

   1 /*
   2  * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
   3  *
   4  * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
   5  *
   6  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
   7  *
   8  * Configuration for the flea3 board.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #include <asm/arch/imx-regs.h>
  17
  18  /* High Level Configuration Options */
  19 #define CONFIG_MX35
  20
  21 #define CONFIG_SYS_DCACHE_OFF
  22 #define CONFIG_SYS_CACHELINE_SIZE       32
  23
  24 #define CONFIG_DISPLAY_CPUINFO
  25
  26 /* Only in case the value is not present in mach-types.h */
  27 #ifndef MACH_TYPE_FLEA3
  28 #define MACH_TYPE_FLEA3                3668
  29 #endif
  30
  31 #define CONFIG_MACH_TYPE                MACH_TYPE_FLEA3
  32
  33 /* Set TEXT at the beginning of the NOR flash */
  34 #define CONFIG_SYS_TEXT_BASE    0xA0000000
  35
  36 /* This is required to setup the ESDC controller */
  37 #define CONFIG_BOARD_EARLY_INIT_F
  38
  39 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  40 #define CONFIG_REVISION_TAG
  41 #define CONFIG_SETUP_MEMORY_TAGS
  42 #define CONFIG_INITRD_TAG
  43
  44 /*
  45  * Size of malloc() pool
  46  */
  47 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  48
  49 /*
  50  * Hardware drivers
  51  */
  52 #define CONFIG_SYS_I2C
  53 #define CONFIG_SYS_I2C_MXC
  54 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  55 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  56 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  57 #define CONFIG_SYS_SPD_BUS_NUM          2 /* I2C3 */
  58 #define CONFIG_SYS_MXC_I2C3_SLAVE       0xfe
  59 #define CONFIG_MXC_SPI
  60 #define CONFIG_MXC_GPIO
  61
  62 /*
  63  * UART (console)
  64  */
  65 #define CONFIG_MXC_UART
  66 #define CONFIG_MXC_UART_BASE    UART3_BASE
  67
  68 /* allow to overwrite serial and ethaddr */
  69 #define CONFIG_ENV_OVERWRITE
  70 #define CONFIG_CONS_INDEX       1
  71 #define CONFIG_BAUDRATE         115200
  72
  73 /*
  74  * Command definition
  75  */
  76 #define CONFIG_BOOTP_SUBNETMASK
  77 #define CONFIG_BOOTP_GATEWAY
  78 #define CONFIG_BOOTP_DNS
  79
  80 #define CONFIG_CMD_NAND
  81 #define CONFIG_CMD_CACHE
  82
  83 #define CONFIG_CMD_MII
  84 #define CONFIG_NET_RETRY_COUNT  100
  85
  86 #define CONFIG_BOOTDELAY        3
  87
  88 #define CONFIG_LOADADDR         0x80800000      /* loadaddr env var */
  89
  90 /*
  91  * Ethernet on SOC (FEC)
  92  */
  93 #define CONFIG_FEC_MXC
  94 #define IMX_FEC_BASE    FEC_BASE_ADDR
  95 #define CONFIG_PHYLIB
  96 #define CONFIG_PHY_MICREL
  97 #define CONFIG_FEC_MXC_PHYADDR  0x1
  98
  99 #define CONFIG_MII
 100
 101 #define CONFIG_ARP_TIMEOUT      200UL
 102
 103 /*
 104  * Miscellaneous configurable options
 105  */
 106 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 107 #define CONFIG_CMDLINE_EDITING
 108
 109 #define CONFIG_AUTO_COMPLETE
 110 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 111 /* Print Buffer Size */
 112 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 113 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 114 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 115
 116 #define CONFIG_SYS_MEMTEST_START        0       /* memtest works on */
 117 #define CONFIG_SYS_MEMTEST_END          0x10000
 118
 119 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 120
 121 /*
 122  * Physical Memory Map
 123  */
 124 #define CONFIG_NR_DRAM_BANKS    1
 125 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 126 #define PHYS_SDRAM_1_SIZE       (128 * 1024 * 1024)
 127
 128 #define CONFIG_SYS_SDRAM_BASE           CSD0_BASE_ADDR
 129 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR + 0x10000)
 130 #define CONFIG_SYS_INIT_RAM_SIZE                (IRAM_SIZE / 2)
 131 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 132                                         GENERATED_GBL_DATA_SIZE)
 133 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 134                                         CONFIG_SYS_GBL_DATA_OFFSET)
 135
 136 /*
 137  * MTD Command for mtdparts
 138  */
 139 #define CONFIG_CMD_MTDPARTS
 140 #define CONFIG_MTD_DEVICE
 141 #define CONFIG_FLASH_CFI_MTD
 142 #define CONFIG_MTD_PARTITIONS
 143 #define MTDIDS_DEFAULT          "nand0=mxc_nand,nor0=physmap-flash.0"
 144 #define MTDPARTS_DEFAULT        "mtdparts=mxc_nand:50m(root1)," \
 145                                 "32m(rootfb)," \
 146                                 "64m(pcache)," \
 147                                 "64m(app1)," \
 148                                 "10m(app2),-(spool);" \
 149                                 "physmap-flash.0:512k(u-boot),64k(env1)," \
 150                                 "64k(env2),3776k(kernel1),3776k(kernel2)"
 151
 152 /*
 153  * FLASH and environment organization
 154  */
 155 #define CONFIG_SYS_FLASH_BASE           CS0_BASE_ADDR
 156 #define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
 157 #define CONFIG_SYS_MAX_FLASH_SECT 512   /* max number of sectors on one chip */
 158 /* Monitor at beginning of flash */
 159 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 160 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 161
 162 #define CONFIG_ENV_SECT_SIZE    (64 * 1024)
 163 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 164
 165 /* Address and size of Redundant Environment Sector     */
 166 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 167 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 168
 169 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + \
 170                                 CONFIG_SYS_MONITOR_LEN)
 171
 172 #define CONFIG_ENV_IS_IN_FLASH
 173
 174 /*
 175  * CFI FLASH driver setup
 176  */
 177 #define CONFIG_SYS_FLASH_CFI            /* Flash memory is CFI compliant */
 178 #define CONFIG_FLASH_CFI_DRIVER
 179
 180 /* A non-standard buffered write algorithm */
 181 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* faster */
 182 #define CONFIG_SYS_FLASH_PROTECTION     /* Use hardware sector protection */
 183
 184 /*
 185  * NAND FLASH driver setup
 186  */
 187 #define CONFIG_NAND_MXC
 188 #define CONFIG_MXC_NAND_REGS_BASE       (NFC_BASE_ADDR)
 189 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 190 #define CONFIG_SYS_NAND_BASE            (NFC_BASE_ADDR)
 191 #define CONFIG_MXC_NAND_HWECC
 192 #define CONFIG_SYS_NAND_LARGEPAGE
 193
 194 /*
 195  * Default environment and default scripts
 196  * to update uboot and load kernel
 197  */
 198
 199 #define CONFIG_HOSTNAME flea3
 200 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 201         "netdev=eth0\0"                                                 \
 202         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 203                 "nfsroot=${serverip}:${rootpath}\0"                     \
 204         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 205         "addip_sta=setenv bootargs ${bootargs} "                        \
 206                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 207                 ":${hostname}:${netdev}:off panic=1\0"                  \
 208         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
 209         "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
 210                 "else run addip_sta;fi\0"                               \
 211         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 212         "addtty=setenv bootargs ${bootargs}"                            \
 213                 " console=ttymxc2,${baudrate}\0"                        \
 214         "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
 215         "loadaddr=80800000\0"                                           \
 216         "kernel_addr_r=80800000\0"                                      \
 217         "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
 218         "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
 219         "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"      \
 220         "flash_self=run ramargs addip addtty addmtd addmisc;"           \
 221                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 222         "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
 223                 "bootm ${kernel_addr}\0"                                \
 224         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 225                 "run nfsargs addip addtty addmtd addmisc;"              \
 226                 "bootm ${kernel_addr_r}\0"                              \
 227         "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
 228                 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
 229         "net_self=if run net_self_load;then "                           \
 230                 "run ramargs addip addtty addmtd addmisc;"              \
 231                 "bootm ${kernel_addr_r} ${ramdisk_addr_r};"             \
 232                 "else echo Images not loades;fi\0"                      \
 233         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
 234         "load=tftp ${loadaddr} ${u-boot}\0"                             \
 235         "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
 236         "update=protect off ${uboot_addr} +40000;"                      \
 237                 "erase ${uboot_addr} +40000;"                           \
 238                 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"          \
 239         "upd=if run load;then echo Updating u-boot;if run update;"      \
 240                 "then echo U-Boot updated;"                             \
 241                         "else echo Error updating u-boot !;"            \
 242                         "echo Board without bootloader !!;"             \
 243                 "fi;"                                                   \
 244                 "else echo U-Boot not downloaded..exiting;fi\0"         \
 245         "bootcmd=run net_nfs\0"
 246
 247 #endif                          /* __CONFIG_H */