include/configs/at91sam9x5ek.h

   1 /*
   2  * Copyright (C) 2012 Atmel Corporation
   3  *
   4  * Configuation settings for the AT91SAM9X5EK board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H__
  10 #define __CONFIG_H__
  11
  12 #include <asm/hardware.h>
  13
  14 #define CONFIG_SYS_TEXT_BASE            0x26f00000
  15
  16 /* ARM asynchronous clock */
  17 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
  18 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000        /* 12 MHz crystal */
  19
  20 #define CONFIG_AT91SAM9X5EK
  21
  22 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  23 #define CONFIG_SETUP_MEMORY_TAGS
  24 #define CONFIG_INITRD_TAG
  25 #define CONFIG_SKIP_LOWLEVEL_INIT
  26 #define CONFIG_BOARD_EARLY_INIT_F
  27 #define CONFIG_DISPLAY_CPUINFO
  28
  29 #define CONFIG_CMD_BOOTZ
  30
  31 /* general purpose I/O */
  32 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
  33 #define CONFIG_AT91_GPIO
  34
  35 /* serial console */
  36 #define CONFIG_ATMEL_USART
  37 #define CONFIG_USART_BASE       ATMEL_BASE_DBGU
  38 #define CONFIG_USART_ID         ATMEL_ID_SYS
  39
  40 /* LCD */
  41 #define CONFIG_LCD
  42 #define LCD_BPP                 LCD_COLOR16
  43 #define LCD_OUTPUT_BPP          24
  44 #define CONFIG_LCD_LOGO
  45 #define CONFIG_LCD_INFO
  46 #define CONFIG_LCD_INFO_BELOW_LOGO
  47 #define CONFIG_SYS_WHITE_ON_BLACK
  48 #define CONFIG_ATMEL_HLCD
  49 #define CONFIG_ATMEL_LCD_RGB565
  50 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  51
  52 #define CONFIG_BOOTDELAY        3
  53
  54 /*
  55  * BOOTP options
  56  */
  57 #define CONFIG_BOOTP_BOOTFILESIZE
  58 #define CONFIG_BOOTP_BOOTPATH
  59 #define CONFIG_BOOTP_GATEWAY
  60 #define CONFIG_BOOTP_HOSTNAME
  61
  62 /* no NOR flash */
  63 #define CONFIG_SYS_NO_FLASH
  64
  65 /*
  66  * Command line configuration.
  67  */
  68 #define CONFIG_CMD_NAND
  69 #define CONFIG_CMD_MMC
  70 #define CONFIG_CMD_FAT
  71
  72 /*
  73  * define CONFIG_USB_EHCI to enable USB Hi-Speed (aka 2.0)
  74  * NB: in this case, USB 1.1 devices won't be recognized.
  75  */
  76
  77 /* SDRAM */
  78 #define CONFIG_NR_DRAM_BANKS            1
  79 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  80 #define CONFIG_SYS_SDRAM_SIZE           0x08000000      /* 128 megs */
  81
  82 #define CONFIG_SYS_INIT_SP_ADDR \
  83         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
  84
  85 /* DataFlash */
  86 #ifdef CONFIG_CMD_SF
  87 #define CONFIG_ATMEL_SPI
  88 #define CONFIG_SF_DEFAULT_SPEED         30000000
  89 #endif
  90
  91 /* NAND flash */
  92 #ifdef CONFIG_CMD_NAND
  93 #define CONFIG_NAND_ATMEL
  94 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  95 #define CONFIG_SYS_NAND_BASE            0x40000000
  96 #define CONFIG_SYS_NAND_DBW_8           1
  97 /* our ALE is AD21 */
  98 #define CONFIG_SYS_NAND_MASK_ALE        (1 << 21)
  99 /* our CLE is AD22 */
 100 #define CONFIG_SYS_NAND_MASK_CLE        (1 << 22)
 101 #define CONFIG_SYS_NAND_ENABLE_PIN      AT91_PIN_PD4
 102 #define CONFIG_SYS_NAND_READY_PIN       AT91_PIN_PD5
 103
 104 /* PMECC & PMERRLOC */
 105 #define CONFIG_ATMEL_NAND_HWECC         1
 106 #define CONFIG_ATMEL_NAND_HW_PMECC      1
 107 #define CONFIG_PMECC_CAP                2
 108 #define CONFIG_PMECC_SECTOR_SIZE        512
 109
 110 #define CONFIG_CMD_NAND_TRIMFFS
 111
 112 #define CONFIG_MTD_DEVICE
 113 #define CONFIG_CMD_MTDPARTS
 114 #define CONFIG_MTD_PARTITIONS
 115 #define CONFIG_RBTREE
 116 #define CONFIG_LZO
 117 #define CONFIG_CMD_UBI
 118 #define CONFIG_CMD_UBIFS
 119 #endif
 120
 121 /* MMC */
 122 #ifdef CONFIG_CMD_MMC
 123 #define CONFIG_MMC
 124 #define CONFIG_GENERIC_MMC
 125 #define CONFIG_GENERIC_ATMEL_MCI
 126 #endif
 127
 128 /* FAT */
 129 #ifdef CONFIG_CMD_FAT
 130 #define CONFIG_DOS_PARTITION
 131 #endif
 132
 133 /* Ethernet */
 134 #define CONFIG_MACB
 135 #define CONFIG_RMII
 136 #define CONFIG_NET_RETRY_COUNT          20
 137 #define CONFIG_MACB_SEARCH_PHY
 138
 139 /* USB */
 140 #ifdef CONFIG_CMD_USB
 141 #ifdef CONFIG_USB_EHCI
 142 #define CONFIG_USB_EHCI_ATMEL
 143 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      2
 144 #else
 145 #define CONFIG_USB_ATMEL
 146 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL
 147 #define CONFIG_USB_OHCI_NEW
 148 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 149 #define CONFIG_SYS_USB_OHCI_REGS_BASE           ATMEL_BASE_OHCI
 150 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9x5"
 151 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      3
 152 #endif
 153 #define CONFIG_USB_STORAGE
 154 #endif
 155
 156 #define CONFIG_SYS_LOAD_ADDR            0x22000000      /* load address */
 157
 158 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 159 #define CONFIG_SYS_MEMTEST_END          0x26e00000
 160
 161 #ifdef CONFIG_SYS_USE_NANDFLASH
 162 /* bootstrap + u-boot + env + linux in nandflash */
 163 #define CONFIG_ENV_IS_IN_NAND
 164 #define CONFIG_ENV_OFFSET               0xc0000
 165 #define CONFIG_ENV_OFFSET_REDUND        0x100000
 166 #define CONFIG_ENV_SIZE         0x20000         /* 1 sector = 128 kB */
 167 #define CONFIG_BOOTCOMMAND      "nand read " \
 168                                 "0x22000000 0x200000 0x300000; " \
 169                                 "bootm 0x22000000"
 170 #elif defined(CONFIG_SYS_USE_SPIFLASH)
 171 /* bootstrap + u-boot + env + linux in spi flash */
 172 #define CONFIG_ENV_IS_IN_SPI_FLASH
 173 #define CONFIG_ENV_OFFSET       0x5000
 174 #define CONFIG_ENV_SIZE         0x3000
 175 #define CONFIG_ENV_SECT_SIZE    0x1000
 176 #define CONFIG_ENV_SPI_MAX_HZ   30000000
 177 #define CONFIG_BOOTCOMMAND      "sf probe 0; " \
 178                                 "sf read 0x22000000 0x100000 0x300000; " \
 179                                 "bootm 0x22000000"
 180 #elif defined(CONFIG_SYS_USE_DATAFLASH)
 181 /* bootstrap + u-boot + env + linux in data flash */
 182 #define CONFIG_ENV_IS_IN_SPI_FLASH
 183 #define CONFIG_ENV_OFFSET       0x4200
 184 #define CONFIG_ENV_SIZE         0x4200
 185 #define CONFIG_ENV_SECT_SIZE    0x210
 186 #define CONFIG_ENV_SPI_MAX_HZ   30000000
 187 #define CONFIG_BOOTCOMMAND      "sf probe 0; " \
 188                                 "sf read 0x22000000 0x84000 0x294000; " \
 189                                 "bootm 0x22000000"
 190 #else /* CONFIG_SYS_USE_MMC */
 191 /* bootstrap + u-boot + env + linux in mmc */
 192 #define CONFIG_ENV_IS_IN_FAT
 193 #define CONFIG_FAT_WRITE
 194 #define FAT_ENV_INTERFACE       "mmc"
 195 #define FAT_ENV_FILE            "uboot.env"
 196 #define FAT_ENV_DEVICE_AND_PART "0"
 197 #define CONFIG_ENV_SIZE         0x4000
 198 #endif
 199
 200 #ifdef CONFIG_SYS_USE_MMC
 201 #define CONFIG_BOOTARGS         "mem=128M console=ttyS0,115200 " \
 202                                 "mtdparts=atmel_nand:" \
 203                                 "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
 204                                 "root=/dev/mmcblk0p2 " \
 205                                 "rw rootfstype=ext4 rootwait"
 206 #else
 207 #define CONFIG_BOOTARGS                                                 \
 208         "console=ttyS0,115200 earlyprintk "                             \
 209         "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
 210         "256k(env),256k(env_redundant),256k(spare),"                    \
 211         "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
 212         "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw"
 213 #endif
 214
 215 #define CONFIG_BAUDRATE         115200
 216
 217 #define CONFIG_SYS_CBSIZE       256
 218 #define CONFIG_SYS_MAXARGS      16
 219 #define CONFIG_SYS_LONGHELP
 220 #define CONFIG_CMDLINE_EDITING
 221 #define CONFIG_AUTO_COMPLETE
 222
 223 /*
 224  * Size of malloc() pool
 225  */
 226 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024 + 0x1000)
 227
 228 /* SPL */
 229 #define CONFIG_SPL_FRAMEWORK
 230 #define CONFIG_SPL_TEXT_BASE            0x300000
 231 #define CONFIG_SPL_MAX_SIZE             0x6000
 232 #define CONFIG_SPL_STACK                0x308000
 233
 234 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
 235 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 236 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
 237 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 238
 239 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 240 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 241 #define CONFIG_SPL_GPIO_SUPPORT
 242 #define CONFIG_SPL_SERIAL_SUPPORT
 243
 244 #define CONFIG_SPL_BOARD_INIT
 245 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
 246
 247 #define CONFIG_SYS_MASTER_CLOCK         132096000
 248 #define CONFIG_SYS_AT91_PLLA            0x20c73f03
 249 #define CONFIG_SYS_MCKR                 0x1301
 250 #define CONFIG_SYS_MCKR_CSS             0x1302
 251
 252 #ifdef CONFIG_SYS_USE_MMC
 253 #define CONFIG_SPL_LDSCRIPT             arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
 254 #define CONFIG_SPL_MMC_SUPPORT
 255 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x400
 256 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 257 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 258 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
 259 #define CONFIG_SPL_FAT_SUPPORT
 260 #define CONFIG_SPL_LIBDISK_SUPPORT
 261
 262 #elif CONFIG_SYS_USE_NANDFLASH
 263 #define CONFIG_SPL_NAND_SUPPORT
 264 #define CONFIG_SPL_NAND_DRIVERS
 265 #define CONFIG_SPL_NAND_BASE
 266 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 267 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 268 #define CONFIG_SYS_NAND_PAGE_SIZE       0x800
 269 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 270 #define CONFIG_SYS_NAND_OOBSIZE         64
 271 #define CONFIG_SYS_NAND_BLOCK_SIZE      0x20000
 272 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0x0
 273 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 274
 275 #elif CONFIG_SYS_USE_SPIFLASH
 276 #define CONFIG_SPL_SPI_SUPPORT
 277 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 278 #define CONFIG_SPL_SPI_LOAD
 279 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8400
 280
 281 #endif
 282
 283 #endif