include/configs/aristainetos2.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2015
   4  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5  *
   6  * Based on:
   7  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   8  *
   9  * Configuration settings for the Freescale i.MX6DL aristainetos2 board.
  10  */
  11 #ifndef __ARISTAINETOS2_CONFIG_H
  12 #define __ARISTAINETOS2_CONFIG_H
  13
  14 #define CONFIG_HOSTNAME         "aristainetos2"
  15
  16 #if (CONFIG_SYS_BOARD_VERSION == 5)
  17 #define CONFIG_MXC_UART_BASE    UART2_BASE
  18 #define CONSOLE_DEV     "ttymxc1"
  19 #elif (CONFIG_SYS_BOARD_VERSION == 6)
  20 #define CONFIG_MXC_UART_BASE    UART1_BASE
  21 #define CONSOLE_DEV     "ttymxc0"
  22 #endif
  23
  24 #define CONFIG_FEC_XCV_TYPE             RGMII
  25
  26 /* Framebuffer */
  27 #define CONFIG_SYS_LDB_CLOCK    28341000
  28
  29 #include "mx6_common.h"
  30
  31 #define CONFIG_MMCROOT          "/dev/mmcblk0p1"
  32
  33 /* MMC Configs */
  34 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC1_BASE_ADDR
  35
  36 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  37 #define CONFIG_ETHPRIME                 "FEC"
  38 #define CONFIG_FEC_MXC_PHYADDR          0
  39
  40 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
  41
  42 #ifdef CONFIG_IMX_HAB
  43 #define HAB_EXTRA_SETTINGS \
  44         "hab_check_addr=" \
  45                 "if hab_auth_img ${check_addr} ${filesize} ; then " \
  46                         "true;" \
  47                 "else " \
  48                         "echo \"HAB checks ${hab_check_filetype} " \
  49                         "failed!\"; " \
  50                         "false; " \
  51                 "fi;\0" \
  52         "hab_check_file_fit=" \
  53                 "if env exists enable_hab_check && test " \
  54                         "${enable_hab_check} -eq 1 ; then " \
  55                         "setenv hab_check_filetype \"FIT file on SD card " \
  56                         "or eMMC\";" \
  57                         "env set check_addr ${fit_addr_r};" \
  58                         "run hab_check_addr;" \
  59                 "else " \
  60                         "true; "\
  61                 "fi;\0" \
  62         "hab_check_file_bootscript=" \
  63                 "if env exists enable_hab_check && test " \
  64                         "${enable_hab_check} -eq 1 ; then " \
  65                         "setenv hab_check_filetype \"Bootscript file\";" \
  66                         "env set check_addr ${loadaddr};" \
  67                         "run hab_check_addr;" \
  68                 "else " \
  69                         "true; "\
  70                 "fi;\0" \
  71         "hab_check_flash_fit=" \
  72                 "if env exists enable_hab_check && test " \
  73                         "${enable_hab_check} -eq 1 ; then " \
  74                         "setenv hab_check_filetype \"FIT files on flash\";" \
  75                         "env set check_addr ${fit_addr_r};" \
  76                         "run hab_check_addr;" \
  77                 "else " \
  78                         "true; "\
  79                 "fi;\0" \
  80         "enable_hab_check=1\0"
  81 #else
  82 #define HAB_EXTRA_SETTINGS \
  83         "hab_check_addr=echo HAB check addr always returns " \
  84                 "true;true\0" \
  85         "hab_check_file_fit=echo HAB check FIT file always returns " \
  86                 "true;true\0" \
  87         "hab_check_flash_fit=echo HAB check flash FIT always returns " \
  88                 "true;true\0" \
  89         "hab_check_file_bootscript=echo HAB check bootscript always " \
  90                 "returns true;true\0" \
  91         "enable_hab_check=0\0"
  92 #endif
  93
  94 #if (CONFIG_SYS_BOARD_VERSION == 5)
  95 #define EXTRA_ENV_BOARD_SETTINGS \
  96         "dead=while true; do; " \
  97                 "led led_red on; sleep 1;" \
  98                 "led led_red off; sleep 1;" \
  99         "done\0"
 100 #elif (CONFIG_SYS_BOARD_VERSION == 6)
 101 #define EXTRA_ENV_BOARD_SETTINGS \
 102         "dead=while true; do; " \
 103                 "led led_red on; led led_red2 on; sleep 1;" \
 104                 "led led_red off; led led_red2 off;; sleep 1;" \
 105         "done\0"
 106 #endif
 107
 108 #define CONFIG_EXTRA_ENV_SETTINGS \
 109         "disable_giga=yes\0" \
 110         "usb_pgood_delay=2000\0" \
 111         "nor_bootdelay=-2\0" \
 112         "script=u-boot.scr\0" \
 113         "loadaddr=0x12000000\0" \
 114         "fit_addr_r=0x14000000\0" \
 115         "uboot_sz=d0000\0" \
 116         "panel=lb07wv8\0" \
 117         "splashpos=m,m\0" \
 118         "console=" CONSOLE_DEV "\0" \
 119         "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \
 120         "mtdids=nor0=spi0.0\0" \
 121         "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
 122                 "-(ubi-nor)\0" \
 123         "mk_fitfile_path=setenv fit_file /${sysnum}/system.itb\0" \
 124         "mk_rescue_fitfile_path=setenv rescue_fit_file /${rescue_sysnum}/system.itb\0" \
 125         "mk_uboot_path=setenv uboot /${sysnum}/u-boot.imx\0" \
 126         "mk_pubkey_path=setenv pubkey /${sysnum}/PCR.pem\0" \
 127         "mk_rescue_pubkey_path=setenv pubkey /${rescue_sysnum}/PCR.pem\0" \
 128         "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
 129                 "bootmode=${bootmode} rng_core.default_quality=1000 " \
 130                 "mmcpart=${mmcpart} emmcpart=${emmcpart} sysnum=${sysnum}\0" \
 131         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
 132         "boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \
 133         "get_env=mw ${loadaddr} 0 0x20000;" \
 134                 "mmc rescan;" \
 135                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
 136                 "env import -t ${loadaddr}\0" \
 137         "default_env=gpio set wp_spi_nor.gpio-hog;" \
 138                 "sf probe;" \
 139                 "sf protect unlock 0 0x1000000;" \
 140                 "mw ${loadaddr} 0 0x20000;" \
 141                 "env export -t ${loadaddr} serial# ethaddr " \
 142                 "board_type panel;" \
 143                 "env default -a;" \
 144                 "env import -t ${loadaddr}\0" \
 145         "loadbootscript=" \
 146                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 147                 "${script};\0" \
 148         "loadbootscriptUSB=" \
 149                 "ext4load usb 0 ${loadaddr} ${script};\0" \
 150         "loadbootscriptUSBf=" \
 151                 "fatload usb 0 ${loadaddr} ${script};\0" \
 152         "bootscriptUSB=echo Running bootscript from usb-stick ...; " \
 153                 "source \0" \
 154         "bootscript=echo Running bootscript from mmc ...; " \
 155                 "source \0" \
 156         "mmcpart=1\0" \
 157         "mmcdev=0\0" \
 158         "emmcpart=1\0" \
 159         "emmcdev=1\0" \
 160         "sysnum=1\0" \
 161         "rescue_sysnum=0\0" \
 162         "rreason=18\0" \
 163         "mainboot=echo Booting from eMMC ...; " \
 164                 "run mainargs addmtd addmisc;" \
 165                 "run boot_board_type;" \
 166                 "bootm ${fit_addr_r}\0" \
 167         "mainargs=setenv bootargs console=${console},${baudrate} " \
 168                 "root=${emmcroot} rootfstype=ext4\0 " \
 169         "main_load_fit=run mk_fitfile_path; " \
 170                 "ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
 171                 "${fit_file}; " \
 172                 "imi ${fit_addr_r}\0 " \
 173         "rescue_load_fit=run mk_rescue_fitfile_path; " \
 174                 "ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
 175                 "${rescue_fit_file}; " \
 176                 "imi ${fit_addr_r}\0" \
 177         "main_load_pubkey=run mk_pubkey_path; " \
 178                 "setenv hab_check_filetype \"PCR.pem\";" \
 179                 "env set check_addr ${loadaddr};" \
 180                 "ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \
 181                 "${pubkey}\0" \
 182         "rescue_load_pubkey=run mk_rescue_pubkey_path; " \
 183                 "setenv hab_check_filetype \"PCR.pem\";" \
 184                 "env set check_addr ${loadaddr};" \
 185                 "ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \
 186                 "${pubkey}\0" \
 187         "mainRargs=setenv bootargs console=${console},${baudrate} " \
 188                 "rescue_sysnum=${rescue_sysnum} root=${emmcroot} rootfstype=ext4\0" \
 189         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 190         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 191                 "root=${mmcroot}\0" \
 192         "mmcRargs=setenv bootargs console=${console},${baudrate} " \
 193                 "rescue_sysnum=${rescue_sysnum} root=${mmcroot}\0" \
 194         "mmcboot=echo Booting from mmc ...; " \
 195                 "run mmcargs addmtd addmisc;" \
 196                 "run boot_board_type;" \
 197                 "bootm ${fit_addr_r}\0" \
 198         "mmc_load_fit=run mk_fitfile_path; " \
 199                 "ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
 200                 "${fit_file}\0" \
 201                 "imi ${fit_addr_r}\0" \
 202         "mmc_rescue_load_fit=run mk_rescue_fitfile_path; " \
 203                 "ext4load mmc ${mmcdev}:${mmcpart} " \
 204                 "${fit_addr_r} ${rescue_fit_file}\0" \
 205                 "imi ${fit_addr_r}\0" \
 206         "mmc_load_uboot=run mk_uboot_path; " \
 207                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 208                 "${uboot}\0" \
 209         "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
 210                 "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
 211                 "setexpr uboot_maxsize ${uboot_sz} - 400;" \
 212                 "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
 213                 "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
 214                 "sf write ${loadaddr} 400 ${filesize};" \
 215                 "sf read ${cmp_buf} 400 ${uboot_sz};" \
 216                 "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
 217         "mmc_load_pubkey=run mk_pubkey_path; " \
 218                 "setenv hab_check_filetype \"PCR.pem\";" \
 219                 "env set check_addr ${loadaddr};" \
 220                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 221                 "${pubkey}\0" \
 222         "mmc_rescue_load_pubkey=run mk_rescue_pubkey_path; " \
 223                 "setenv hab_check_filetype \"PCR.pem\";" \
 224                 "env set check_addr ${loadaddr};" \
 225                 "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 226                 "${pubkey}\0" \
 227         "rescueboot=echo Booting rescue system ...; " \
 228                 "run addmtd addmisc;" \
 229                 "if test -n ${rescue_reason}; then run rescue_reason;fi;" \
 230                 "run boot_board_type;" \
 231                 "if bootm ${fit_addr_r}; then ; " \
 232                 "else " \
 233                         "run dead; " \
 234                 "fi; \0" \
 235         "r_reason_syserr=setenv rescue_reason setenv bootargs " \
 236                 "\\\\${bootargs} " \
 237                 "rescueReason=$rreason\0 " \
 238         "usb_load_fit=run mk_fitfile_path; " \
 239                 "ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
 240         "usb_load_fitf=run mk_fitfile_path; " \
 241                 "fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
 242         "usb_load_rescuefit=run mk_rescue_fitfile_path; " \
 243                 "ext4load usb 0 ${fit_addr_r} " \
 244                 "${rescue_fit_file}\0" \
 245         "usb_load_rescuefitf=run mk_rescue_fitfile_path; " \
 246                 "fatload usb 0 ${fit_addr_r} " \
 247                 "${rescue_fit_file}\0" \
 248         "usb_load_pubkey=run mk_pubkey_path; " \
 249                 "setenv hab_check_filetype \"PCR.pem\";" \
 250                 "env set check_addr ${loadaddr};" \
 251                 "ext4load usb 0 ${loadaddr} ${pubkey}\0" \
 252         "usb_rescue_load_pubkey=run mk_rescue_pubkey_path; " \
 253                 "setenv hab_check_filetype \"PCR.pem\";" \
 254                 "env set check_addr ${loadaddr};" \
 255                 "ext4load usb 0 ${loadaddr} ${pubkey}\0" \
 256         "usb_load_pubkeyf=run mk_pubkey_path; " \
 257                 "setenv hab_check_filetype \"PCR.pem\";" \
 258                 "env set check_addr ${loadaddr};" \
 259                 "fatload usb 0 ${loadaddr} ${pubkey}\0" \
 260         "usb_rescue_load_pubkeyf=run mk_rescue_pubkey_path; " \
 261                 "setenv hab_check_filetype \"PCR.pem\";" \
 262                 "env set check_addr ${loadaddr};" \
 263                 "fatload usb 0 ${loadaddr} ${pubkey}\0" \
 264         "usbroot=/dev/sda1 rootwait rw\0" \
 265         "usbboot=echo Booting from usb-stick ...; " \
 266                 "run usbargs addmtd addmisc;" \
 267                 "run boot_board_type;" \
 268                 "bootm ${fit_addr_r}\0" \
 269         "usbargs=setenv bootargs console=${console},${baudrate} " \
 270                 "root=${usbroot}\0" \
 271         "usbRargs=setenv bootargs console=${console},${baudrate} " \
 272                 "rescue_sysnum=${rescue_sysnum} root=${usbroot} rw\0 " \
 273         "mmc_rescue_boot=" \
 274                 "run r_reason_syserr;" \
 275                 "if run mmc_rescue_load_pubkey hab_check_addr " \
 276                 "mmc_rescue_load_fit hab_check_file_fit; then " \
 277                         "run mmcRargs; run rescueboot; " \
 278                 "else " \
 279                         "echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \
 280                         "run dead; " \
 281                 "fi;\0" \
 282         "main_rescue_boot=" \
 283                 "if run main_load_pubkey hab_check_addr " \
 284                 "main_load_fit hab_check_flash_fit; then " \
 285                         "if run mainboot; then ; " \
 286                         "else " \
 287                                 "run r_reason_syserr;" \
 288                                 "if run rescue_load_pubkey hab_check_addr " \
 289                                 "rescue_load_fit hab_check_file_fit; then " \
 290                                         "run mainRargs; run rescueboot; " \
 291                                 "else " \
 292                                         "echo RESCUE SYSTEM BOOT FAILURE;" \
 293                                         "run dead; " \
 294                                 "fi; " \
 295                         "fi; " \
 296                 "else " \
 297                         "run r_reason_syserr;" \
 298                         "if run rescue_load_pubkey hab_check_addr " \
 299                         "rescue_load_fit hab_check_file_fit; then " \
 300                                 "run mainRargs; run rescueboot; " \
 301                         "else " \
 302                                 "echo RESCUE SYSTEM BOOT FAILURE;" \
 303                                 "run dead; " \
 304                         "fi; " \
 305                 "fi;\0" \
 306         "usb_mmc_rescue_boot=" \
 307                 "usb start;" \
 308                 "if usb storage; then " \
 309                         "if run loadbootscriptUSB " \
 310                                 "hab_check_file_bootscript;" \
 311                                 "then run bootscriptUSB; " \
 312                         "fi; " \
 313                         "if run loadbootscriptUSBf " \
 314                                 "hab_check_file_bootscript;" \
 315                                 "then run bootscriptUSB; " \
 316                         "fi; " \
 317                         "if run usb_load_pubkey hab_check_addr " \
 318                         "usb_load_fit hab_check_file_fit; then " \
 319                                 "run usbboot; " \
 320                         "fi; " \
 321                         "if run usb_load_pubkeyf hab_check_addr " \
 322                         "usb_load_fitf hab_check_file_fit; then " \
 323                                 "run usbboot; " \
 324                         "fi; "\
 325                         "if run usb_rescue_load_pubkey hab_check_addr " \
 326                         "usb_load_rescuefit hab_check_file_fit; then " \
 327                                 "run r_reason_syserr usbRargs; run rescueboot;" \
 328                         "fi; " \
 329                         "if run usb_rescue_load_pubkeyf hab_check_addr " \
 330                         "usb_load_rescuefitf hab_check_file_fit; then " \
 331                                 "run r_reason_syserr usbRargs; run rescueboot;" \
 332                         "fi; " \
 333                         "run mmc_rescue_boot;" \
 334                 "fi; "\
 335                 "run mmc_rescue_boot;\0" \
 336         "rescue_xload_boot=" \
 337                 "run r_reason_syserr;" \
 338                 "if test ${bootmode} -ne 0 ; then " \
 339                         "mmc dev ${mmcdev};" \
 340                         "if mmc rescan; then " \
 341                                 "if run mmc_rescue_load_pubkey " \
 342                                 "hab_check_addr " \
 343                                 "mmc_rescue_load_fit " \
 344                                 "hab_check_file_fit; then " \
 345                                         "run mmcRargs; run rescueboot; " \
 346                                 "else " \
 347                                         "usb start;" \
 348                                         "if usb storage; then " \
 349                                                 "if run usb_rescue_load_pubkey " \
 350                                                 "hab_check_addr " \
 351                                                 "usb_load_rescuefit " \
 352                                                 "hab_check_file_fit; then " \
 353                                                         "run usbRargs; run rescueboot;" \
 354                                                 "fi; " \
 355                                                 "if run usb_rescue_load_pubkeyf " \
 356                                                 "hab_check_addr " \
 357                                                 "usb_load_rescuefitf " \
 358                                                 "hab_check_file_fit; then " \
 359                                                         "run usbRargs; run rescueboot;" \
 360                                                 "fi; " \
 361                                         "fi;" \
 362                                 "fi;" \
 363                                 "echo RESCUE SYSTEM ON SD OR " \
 364                                         "USB BOOT FAILURE;" \
 365                                 "run dead; " \
 366                         "else " \
 367                                 "usb start;" \
 368                                 "if usb storage; then " \
 369                                         "if run usb_rescue_load_pubkey " \
 370                                         "hab_check_addr " \
 371                                         "usb_load_rescuefit " \
 372                                         "hab_check_file_fit; then " \
 373                                                 "run usbRargs; run rescueboot;" \
 374                                         "fi; " \
 375                                         "if run usb_rescue_load_pubkeyf " \
 376                                         "hab_check_addr " \
 377                                         "usb_load_rescuefitf " \
 378                                         "hab_check_file_fit; then " \
 379                                                 "run usbRargs; run rescueboot;" \
 380                                         "fi; " \
 381                                 "fi;" \
 382                                 "echo RESCUE SYSTEM ON USB BOOT FAILURE;" \
 383                                 "run dead; " \
 384                         "fi; " \
 385                 "else "\
 386                         "if run rescue_load_pubkey hab_check_addr " \
 387                         "rescue_load_fit hab_check_file_fit; then " \
 388                                 "run mainRargs; run rescueboot; " \
 389                         "else " \
 390                                 "echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \
 391                                 "run dead; " \
 392                         "fi; " \
 393                 "fi;\0" \
 394         "ari_boot=if test ${bootmode} -ne 0 ; then " \
 395                 "mmc dev ${mmcdev};" \
 396                 "if mmc rescan; then " \
 397                         "if run loadbootscript hab_check_file_bootscript;" \
 398                                 "then run bootscript; " \
 399                         "fi; " \
 400                         "if run mmc_load_pubkey hab_check_addr " \
 401                         "mmc_load_fit hab_check_file_fit; then " \
 402                                 "if run mmcboot; then ; " \
 403                                 "else " \
 404                                         "run mmc_rescue_boot;" \
 405                                 "fi; " \
 406                         "else " \
 407                                 "run usb_mmc_rescue_boot;" \
 408                         "fi; " \
 409                 "else " \
 410                         "run usb_mmc_rescue_boot;" \
 411                 "fi; " \
 412         "else "\
 413                 "run main_rescue_boot;" \
 414         "fi; \0"\
 415         HAB_EXTRA_SETTINGS \
 416         EXTRA_ENV_BOARD_SETTINGS
 417
 418 #define CONFIG_ARP_TIMEOUT              200UL
 419
 420 /* Physical Memory Map */
 421 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 422
 423 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 424 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 425 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 426
 427 #define CONFIG_SYS_INIT_SP_OFFSET \
 428         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 429 #define CONFIG_SYS_INIT_SP_ADDR \
 430         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 431
 432 #define CONFIG_SYS_FSL_USDHC_NUM        2
 433
 434 /* DMA stuff, needed for GPMI/MXS NAND support */
 435
 436 /* USB Configs */
 437 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 438 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 439 #define CONFIG_MXC_USB_FLAGS    0
 440
 441 /* UBI support */
 442
 443 /* Framebuffer */
 444 /* check this console not needed, after test remove it */
 445 #define CONFIG_IMX_VIDEO_SKIP
 446 #define CONFIG_VIDEO_LOGO
 447 #define CONFIG_VIDEO_BMP_LOGO
 448
 449 #define CONFIG_IMX6_PWM_PER_CLK 66000000
 450
 451 #define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mw,serial#:sw,board_type:sw," \
 452                 "sysnum:dw,panel:sw,ipaddr:iw,serverip:iw"
 453
 454 #endif                         /* __ARISTAINETOS2_CONFIG_H */