include/configs/a4m072.h

   1 /*
   2  * (C) Copyright 2003-2005
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * (C) Copyright 2010
   6  * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*
  15  * High Level Configuration Options
  16  * (easy to change)
  17  */
  18
  19 #define CONFIG_MPC5200          1       /* This is a MPC5200 CPU */
  20 #define CONFIG_A4M072           1       /* ... on A4M072 board */
  21 #define CONFIG_MPC5200_DDR      1       /* ... use DDR RAM */
  22 #define CONFIG_DISPLAY_BOARDINFO
  23
  24 #define CONFIG_SYS_TEXT_BASE    0xFE000000
  25
  26 #define CONFIG_MISC_INIT_R
  27
  28 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000 /* ... running at 33.000000MHz */
  29
  30 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
  31
  32 /*
  33  * Serial console configuration
  34  */
  35 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1 */
  36 #define CONFIG_BAUDRATE         9600    /* ... at 9600 bps */
  37 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, 230400 }
  38 /* define to enable silent console */
  39 #define CONFIG_SILENT_CONSOLE
  40 #define CONFIG_SYS_DEVICE_NULLDEV       1       /* include nulldev device */
  41
  42 /*
  43  * PCI Mapping:
  44  * 0x40000000 - 0x4fffffff - PCI Memory
  45  * 0x50000000 - 0x50ffffff - PCI IO Space
  46  */
  47 #define CONFIG_PCI
  48
  49 #if defined(CONFIG_PCI)
  50 #define CONFIG_PCI_PNP          1
  51 #define CONFIG_PCI_SCAN_SHOW    1
  52 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
  53
  54 #define CONFIG_PCI_MEM_BUS      0x40000000
  55 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
  56 #define CONFIG_PCI_MEM_SIZE     0x10000000
  57
  58 #define CONFIG_PCI_IO_BUS       0x50000000
  59 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
  60 #define CONFIG_PCI_IO_SIZE      0x01000000
  61 #endif
  62
  63 #define CONFIG_SYS_XLB_PIPELINING       1
  64
  65 #undef CONFIG_EEPRO100
  66
  67 /* Partitions */
  68 #define CONFIG_MAC_PARTITION
  69 #define CONFIG_DOS_PARTITION
  70
  71 /* USB */
  72 #define CONFIG_USB_OHCI_NEW
  73 #define CONFIG_USB_STORAGE
  74 #define CONFIG_SYS_OHCI_BE_CONTROLLER
  75 #undef CONFIG_SYS_USB_OHCI_BOARD_INIT
  76 #define CONFIG_SYS_USB_OHCI_CPU_INIT    1
  77 #define CONFIG_SYS_USB_OHCI_REGS_BASE   MPC5XXX_USB
  78 #define CONFIG_SYS_USB_OHCI_SLOT_NAME   "mpc5200"
  79 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      15
  80
  81 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  82
  83 /*
  84  * BOOTP options
  85  */
  86 #define CONFIG_BOOTP_BOOTFILESIZE
  87 #define CONFIG_BOOTP_BOOTPATH
  88 #define CONFIG_BOOTP_GATEWAY
  89 #define CONFIG_BOOTP_HOSTNAME
  90
  91 /*
  92  * Command line configuration.
  93  */
  94 #define CONFIG_CMD_EEPROM
  95 #define CONFIG_CMD_FAT
  96 #define CONFIG_CMD_IDE
  97 #define CONFIG_CMD_MII
  98 #define CONFIG_CMD_DISPLAY
  99
 100 #if defined(CONFIG_PCI)
 101 #define CONFIG_CMD_PCI
 102 #endif
 103
 104 #if (CONFIG_SYS_TEXT_BASE == 0xFE000000)                /* Boot low with 32 MB Flash */
 105 #define CONFIG_SYS_LOWBOOT              1
 106 #define CONFIG_SYS_LOWBOOT32            1
 107 #endif
 108
 109 /*
 110  * Autobooting
 111  */
 112 #define CONFIG_BOOTDELAY        2       /* autoboot after 2 seconds */
 113
 114 #define CONFIG_SYS_AUTOLOAD     "n"
 115
 116 #undef  CONFIG_BOOTARGS
 117 #define CONFIG_PREBOOT                          "run try_update"
 118
 119 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 120         "bk=run add_mtd ; run add_consolespec ; bootm 200000\0"         \
 121         "cf1=diskboot 200000 0:1\0"                                     \
 122         "bootcmd_cf1=run bcf1\0"                                        \
 123         "bcf=setenv bootargs root=/dev/hda3\0"                          \
 124         "bootcmd_nfs=run bnfs\0"                                        \
 125         "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs "\
 126                 "panic=1\0"                                             \
 127         "bootcmd_nor=cp.b ${kernel_addr} 200000 100000;"                \
 128                         "run norargs addip; run bk\0"                   \
 129         "bnfs=nfs 200000 ${rootpath}/boot/uImage;"                      \
 130                         "run nfsargs addip ; run bk\0"                  \
 131         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 132                                 "nfsroot=${serverip}:${rootpath}\0"     \
 133         "try_update=usb start;sleep 2;usb start;sleep 1;"               \
 134                         "fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;"   \
 135                         "source 2F0000\0"                               \
 136         "env_addr=FE060000\0"                                           \
 137         "kernel_addr=FE100000\0"                                        \
 138         "rootfs_addr=FE200000\0"                                        \
 139         "add_mtd=setenv bootargs ${bootargs} mtdparts="                 \
 140                 "phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0"      \
 141         "bcf1=run cf1; run bcf; run addip; run bk\0"                    \
 142         "add_consolespec=setenv bootargs ${bootargs} "                  \
 143                                 "console=/dev/null quiet\0"             \
 144         "addip=if test -n ${ethaddr};"                                  \
 145                 "then if test -n ${ipaddr};"                            \
 146                         "then setenv bootargs ${bootargs} "             \
 147                                 "ip=${ipaddr}:${serverip}:${gatewayip}:"\
 148                                 "${netmask}:${hostname}:${netdev}:off;" \
 149                         "fi;"                                           \
 150                 "else;"                                                 \
 151                         "setenv bootargs ${bootargs} no_ethaddr;"       \
 152                 "fi\0"                                                  \
 153         "hostname=CPUP0\0"                                              \
 154         "netdev=eth0\0"                                                 \
 155         "bootcmd=run bootcmd_nor\0"                                     \
 156         ""
 157 /*
 158  * IPB Bus clocking configuration.
 159  */
 160 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK          /* define for 133MHz speed */
 161
 162 /*
 163  * I2C configuration
 164  */
 165 #define CONFIG_HARD_I2C                 1       /* I2C with hardware support */
 166 #define CONFIG_SYS_I2C_MODULE           2       /* Select I2C module #1 or #2 */
 167
 168 #define CONFIG_SYS_I2C_SPEED            100000 /* 100 kHz */
 169 #define CONFIG_SYS_I2C_SLAVE            0x7F
 170
 171 /*
 172  * EEPROM configuration
 173  */
 174 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x52    /* 1010010x */
 175 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 176 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6
 177 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10
 178 #define CONFIG_SYS_EEPROM_WREN                  1
 179 #define CONFIG_SYS_EEPROM_WP                    GPIO_PSC2_4
 180
 181 /*
 182  * Flash configuration
 183  */
 184 #define CONFIG_SYS_FLASH_BASE           0xFE000000
 185 #define CONFIG_SYS_FLASH_SIZE           0x02000000
 186 #if !defined(CONFIG_SYS_LOWBOOT)
 187 #error "CONFIG_SYS_LOWBOOT not defined?"
 188 #else   /* CONFIG_SYS_LOWBOOT */
 189 #if defined(CONFIG_SYS_LOWBOOT32)
 190 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + 0x00060000)
 191 #endif
 192 #endif  /* CONFIG_SYS_LOWBOOT */
 193
 194 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max num of memory banks      */
 195 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max num of sects on one chip */
 196 #define CONFIG_FLASH_CFI_DRIVER
 197 #define CONFIG_SYS_FLASH_CFI
 198 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 199 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_CS0_START}
 200 #define CONFIG_SYS_FLASH_BANKS_SIZES    {CONFIG_SYS_CS0_SIZE}
 201
 202 /*
 203  * Environment settings
 204  */
 205 #define CONFIG_ENV_IS_IN_FLASH  1
 206 #define CONFIG_ENV_SIZE         0x10000
 207 #define CONFIG_ENV_SECT_SIZE    0x20000
 208 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 209 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 210
 211 #define CONFIG_ENV_OVERWRITE    1
 212
 213 /*
 214  * Memory map
 215  */
 216 #define CONFIG_SYS_MBAR         0xF0000000
 217 #define CONFIG_SYS_SDRAM_BASE   0x00000000
 218 #define CONFIG_SYS_DEFAULT_MBAR 0x80000000
 219
 220 /* Use SRAM until RAM will be available */
 221 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 222 #define CONFIG_SYS_INIT_RAM_SIZE                MPC5XXX_SRAM_SIZE       /* Size of used area in DPRAM */
 223
 224 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 225 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 226
 227 #define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 228 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 229 #   define CONFIG_SYS_RAMBOOT           1
 230 #endif
 231
 232 #define CONFIG_SYS_MONITOR_LEN          (384 << 10)     /* Reserve 384 kB for Monitor   */
 233 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
 234 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 235
 236 /*
 237  * Ethernet configuration
 238  */
 239 #define CONFIG_MPC5xxx_FEC      1
 240 #define CONFIG_MPC5xxx_FEC_MII100
 241 /*
 242  * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
 243  */
 244 /* #define CONFIG_MPC5xxx_FEC_MII10 */
 245 #define CONFIG_PHY_ADDR         0x1f
 246 #define CONFIG_PHY_TYPE         0x79c874                /* AMD Phy Controller */
 247
 248 /*
 249  * GPIO configuration
 250  */
 251 #define CONFIG_SYS_GPS_PORT_CONFIG      0x18000004
 252
 253 /*
 254  * Miscellaneous configurable options
 255  */
 256 #define CONFIG_CMDLINE_EDITING  1
 257 #define CONFIG_SYS_LONGHELP                     /* undef to save memory     */
 258 #if defined(CONFIG_CMD_KGDB)
 259 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size  */
 260 #else
 261 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size  */
 262 #endif
 263 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)      /* Print Buffer Size */
 264 #define CONFIG_SYS_MAXARGS              16              /* max number of command args   */
 265 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 266
 267 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
 268 #define CONFIG_SYS_MEMTEST_END          0x00f00000      /* 1 ... 15 MB in DRAM  */
 269
 270 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 271
 272 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For MPC5xxx CPUs */
 273 #if defined(CONFIG_CMD_KGDB)
 274 #  define CONFIG_SYS_CACHELINE_SHIFT    5       /* log base 2 of the above value */
 275 #endif
 276
 277 /*
 278  * Various low-level settings
 279  */
 280 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 281 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 282 /* Flash at CSBoot, CS0 */
 283 #define CONFIG_SYS_BOOTCS_START         CONFIG_SYS_FLASH_BASE
 284 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 285 #define CONFIG_SYS_BOOTCS_CFG           0x0002DD00
 286 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 287 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 288 /* External SRAM at CS1 */
 289 #define CONFIG_SYS_CS1_START            0x62000000
 290 #define CONFIG_SYS_CS1_SIZE             0x00400000
 291 #define CONFIG_SYS_CS1_CFG              0x00009930
 292 #define CONFIG_SYS_SRAM_BASE            CONFIG_SYS_CS1_START
 293 #define CONFIG_SYS_SRAM_SIZE            CONFIG_SYS_CS1_SIZE
 294 /* LED display at CS7 */
 295 #define CONFIG_SYS_CS7_START            0x6a000000
 296 #define CONFIG_SYS_CS7_SIZE             (64*1024)
 297 #define CONFIG_SYS_CS7_CFG              0x0000bf30
 298
 299 #define CONFIG_SYS_CS_BURST             0x00000000
 300 #define CONFIG_SYS_CS_DEADCYCLE         0x33333003
 301
 302 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
 303
 304 /*-----------------------------------------------------------------------
 305  * USB stuff
 306  *-----------------------------------------------------------------------
 307  */
 308 #define CONFIG_USB_CLOCK        0x0001BBBB
 309 #define CONFIG_USB_CONFIG       0x00001000 /* 0x4000 for SE mode */
 310
 311 /*-----------------------------------------------------------------------
 312  * IDE/ATA stuff Supports IDE harddisk
 313  *-----------------------------------------------------------------------
 314  */
 315
 316 #undef  CONFIG_IDE_8xx_PCCARD           /* Use IDE with PC Card Adapter */
 317
 318 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 319 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 320
 321 #define CONFIG_IDE_PREINIT
 322
 323 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 324 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 2 drives per IDE bus    */
 325
 326 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 327
 328 #define CONFIG_SYS_ATA_BASE_ADDR        MPC5XXX_ATA
 329
 330 /* Offset for data I/O                  */
 331 #define CONFIG_SYS_ATA_DATA_OFFSET      (0x0060)
 332
 333 /* Offset for normal register accesses  */
 334 #define CONFIG_SYS_ATA_REG_OFFSET       (CONFIG_SYS_ATA_DATA_OFFSET)
 335
 336 /* Offset for alternate registers       */
 337 #define CONFIG_SYS_ATA_ALT_OFFSET       (0x005C)
 338
 339 /* Interval between registers                                                */
 340 #define CONFIG_SYS_ATA_STRIDE          4
 341
 342 #define CONFIG_ATAPI                   1
 343
 344 /*-----------------------------------------------------------------------
 345  * Open firmware flat tree support
 346  *-----------------------------------------------------------------------
 347  */
 348 #define OF_CPU                  "PowerPC,5200@0"
 349 #define OF_SOC                  "soc5200@f0000000"
 350 #define OF_TBCLK                (bd->bi_busfreq / 4)
 351 #define OF_STDOUT_PATH          "/soc5200@f0000000/serial@2000"
 352
 353 /* Support for the 7-segment display */
 354 #define CONFIG_SYS_DISP_CHR_RAM      CONFIG_SYS_CS7_START
 355 #define CONFIG_SHOW_ACTIVITY            /* used for display realization */
 356
 357 #define CONFIG_SHOW_BOOT_PROGRESS
 358
 359 #endif /* __CONFIG_H */