3 Informal standard M. Nilsson
4 Document: id3v2.4.0-frames.txt 1st November 2000
7 ID3 tag version 2.4.0 - Native Frames
9 Status of this document
11 This document is an informal standard and replaces the ID3v2.3.0
12 standard [ID3v2]. A formal standard will use another revision number
13 even if the content is identical to document. The contents in this
14 document may change for clarifications but never for added or altered
17 Distribution of this document is unlimited.
22 This document describes the frames natively supported by ID3v2.4.0,
23 which is a revised version of the ID3v2 informal standard [ID3v2.3.0]
24 version 2.3.0. The ID3v2 offers a flexible way of storing audio meta
25 information within audio file itself. The information may be
26 technical information, such as equalisation curves, as well as title,
27 performer, copyright etc.
29 ID3v2.4.0 is meant to be as close as possible to ID3v2.3.0 in order
30 to allow for implementations to be revised as easily as possible.
35 2. Conventions in this document
37 4. Declared ID3v2 frames
38 4.1. Unique file identifier
39 4.2. Text information frames
40 4.2.1. Identification frames
41 4.2.2. Involved persons frames
42 4.2.3. Derived and subjective properties frames
43 4.2.4. Rights and license frames
44 4.2.5. Other text frames
45 4.2.6. User defined text information frame
47 4.3.1. URL link frames - details
48 4.3.2. User defined URL link frame
49 4.4. Music CD Identifier
50 4.5. Event timing codes
51 4.6. MPEG location lookup table
52 4.7. Synced tempo codes
53 4.8. Unsynchronised lyrics/text transcription
54 4.9. Synchronised lyrics/text
56 4.11. Relative volume adjustment (2)
57 4.12. Equalisation (2)
59 4.14. Attached picture
60 4.15. General encapsulated object
63 4.18. Recommended buffer size
64 4.19. Audio encryption
65 4.20. Linked information
66 4.21. Position synchronisation frame
69 4.24. Commercial frame
70 4.25. Encryption method registration
71 4.26. Group identification registration
75 4.30. Audio seek point index
79 A. Appendix A - Genre List from ID3v1
83 2. Conventions in this document
85 Text within "" is a text string exactly as it appears in a tag.
86 Numbers preceded with $ are hexadecimal and numbers preceded with %
87 are binary. $xx is used to indicate a byte with unknown content. %x
88 is used to indicate a bit with unknown content. The most significant
89 bit (MSB) of a byte is called 'bit 7' and the least significant bit
90 (LSB) is called 'bit 0'.
92 A tag is the whole tag described the ID3v2 main structure document
93 [ID3v2-strct]. A frame is a block of information in the tag. The tag
94 consists of a header, frames and optional padding. A field is a piece
95 of information; one value, a string etc. A numeric string is a string
96 that consists of the characters "0123456789" only.
98 The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
99 "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
100 document are to be interpreted as described in RFC 2119 [KEYWORDS].
105 The default settings for the frames described in this document can be
106 divided into the following classes. The flags may be set differently
107 if found more suitable by the software.
109 1. Discarded if tag is altered, discarded if file is altered.
113 2. Discarded if tag is altered, preserved if file is altered.
117 3. Preserved if tag is altered, discarded if file is altered.
119 ASPI, AENC, ETCO, EQU2, MLLT, POSS, SEEK, SYLT, SYTC, RVA2, TENC,
122 4. Preserved if tag is altered, preserved if file is altered.
124 The rest of the frames.
127 4. Declared ID3v2 frames
129 The following frames are declared in this draft.
131 4.19 AENC Audio encryption
132 4.14 APIC Attached picture
133 4.30 ASPI Audio seek point index
136 4.24 COMR Commercial frame
138 4.25 ENCR Encryption method registration
139 4.12 EQU2 Equalisation (2)
140 4.5 ETCO Event timing codes
142 4.15 GEOB General encapsulated object
143 4.26 GRID Group identification registration
145 4.20 LINK Linked information
147 4.4 MCDI Music CD identifier
148 4.6 MLLT MPEG location lookup table
150 4.23 OWNE Ownership frame
152 4.27 PRIV Private frame
153 4.16 PCNT Play counter
154 4.17 POPM Popularimeter
155 4.21 POSS Position synchronisation frame
157 4.18 RBUF Recommended buffer size
158 4.11 RVA2 Relative volume adjustment (2)
162 4.28 SIGN Signature frame
163 4.9 SYLT Synchronised lyric/text
164 4.7 SYTC Synchronised tempo codes
166 4.2.1 TALB Album/Movie/Show title
167 4.2.3 TBPM BPM (beats per minute)
169 4.2.3 TCON Content type
170 4.2.4 TCOP Copyright message
171 4.2.5 TDEN Encoding time
172 4.2.5 TDLY Playlist delay
173 4.2.5 TDOR Original release time
174 4.2.5 TDRC Recording time
175 4.2.5 TDRL Release time
176 4.2.5 TDTG Tagging time
177 4.2.2 TENC Encoded by
178 4.2.2 TEXT Lyricist/Text writer
180 4.2.2 TIPL Involved people list
181 4.2.1 TIT1 Content group description
182 4.2.1 TIT2 Title/songname/content description
183 4.2.1 TIT3 Subtitle/Description refinement
184 4.2.3 TKEY Initial key
185 4.2.3 TLAN Language(s)
187 4.2.2 TMCL Musician credits list
188 4.2.3 TMED Media type
190 4.2.1 TOAL Original album/movie/show title
191 4.2.5 TOFN Original filename
192 4.2.2 TOLY Original lyricist(s)/text writer(s)
193 4.2.2 TOPE Original artist(s)/performer(s)
194 4.2.4 TOWN File owner/licensee
195 4.2.2 TPE1 Lead performer(s)/Soloist(s)
196 4.2.2 TPE2 Band/orchestra/accompaniment
197 4.2.2 TPE3 Conductor/performer refinement
198 4.2.2 TPE4 Interpreted, remixed, or otherwise modified by
199 4.2.1 TPOS Part of a set
200 4.2.4 TPRO Produced notice
202 4.2.1 TRCK Track number/Position in set
203 4.2.4 TRSN Internet radio station name
204 4.2.4 TRSO Internet radio station owner
205 4.2.5 TSOA Album sort order
206 4.2.5 TSOP Performer sort order
207 4.2.5 TSOT Title sort order
208 4.2.1 TSRC ISRC (international standard recording code)
209 4.2.5 TSSE Software/Hardware and settings used for encoding
210 4.2.1 TSST Set subtitle
211 4.2.2 TXXX User defined text information frame
213 4.1 UFID Unique file identifier
214 4.22 USER Terms of use
215 4.8 USLT Unsynchronised lyric/text transcription
217 4.3.1 WCOM Commercial information
218 4.3.1 WCOP Copyright/Legal information
219 4.3.1 WOAF Official audio file webpage
220 4.3.1 WOAR Official artist/performer webpage
221 4.3.1 WOAS Official audio source webpage
222 4.3.1 WORS Official Internet radio station homepage
224 4.3.1 WPUB Publishers official webpage
225 4.3.2 WXXX User defined URL link frame
228 4.1. Unique file identifier
230 This frame's purpose is to be able to identify the audio file in a
231 database, that may provide more information relevant to the content.
232 Since standardisation of such a database is beyond this document, all
233 UFID frames begin with an 'owner identifier' field. It is a null-
234 terminated string with a URL [URL] containing an email address, or a
235 link to a location where an email address can be found, that belongs
236 to the organisation responsible for this specific database
237 implementation. Questions regarding the database should be sent to
238 the indicated email address. The URL should not be used for the
239 actual database queries. The string
240 "http://www.id3.org/dummy/ufid.html" should be used for tests. The
241 'Owner identifier' must be non-empty (more than just a termination).
242 The 'Owner identifier' is then followed by the actual identifier,
243 which may be up to 64 bytes. There may be more than one "UFID" frame
244 in a tag, but only one with the same 'Owner identifier'.
246 <Header for 'Unique file identifier', ID: "UFID">
247 Owner identifier <text string> $00
248 Identifier <up to 64 bytes binary data>
251 4.2. Text information frames
253 The text information frames are often the most important frames,
254 containing information like artist, album and more. There may only be
255 one text information frame of its kind in an tag. All text
256 information frames supports multiple strings, stored as a null
257 separated list, where null is reperesented by the termination code
258 for the character encoding. All text frame identifiers begin with "T".
259 Only text frame identifiers begin with "T", with the exception of the
260 "TXXX" frame. All the text information frames have the following
263 <Header for 'Text information frame', ID: "T000" - "TZZZ",
264 excluding "TXXX" described in 4.2.6.>
266 Information <text string(s) according to encoding>
269 4.2.1. Identification frames
272 The 'Content group description' frame is used if the sound belongs to
273 a larger category of sounds/music. For example, classical music is
274 often sorted in different musical sections (e.g. "Piano Concerto",
275 "Weather - Hurricane").
278 The 'Title/Songname/Content description' frame is the actual name of
279 the piece (e.g. "Adagio", "Hurricane Donna").
282 The 'Subtitle/Description refinement' frame is used for information
283 directly related to the contents title (e.g. "Op. 16" or "Performed
287 The 'Album/Movie/Show title' frame is intended for the title of the
288 recording (or source of sound) from which the audio in the file is
292 The 'Original album/movie/show title' frame is intended for the title
293 of the original recording (or source of sound), if for example the
294 music in the file should be a cover of a previously released song.
297 The 'Track number/Position in set' frame is a numeric string
298 containing the order number of the audio-file on its original
299 recording. This MAY be extended with a "/" character and a numeric
300 string containing the total number of tracks/elements on the original
301 recording. E.g. "4/9".
304 The 'Part of a set' frame is a numeric string that describes which
305 part of a set the audio came from. This frame is used if the source
306 described in the "TALB" frame is divided into several mediums, e.g. a
307 double CD. The value MAY be extended with a "/" character and a
308 numeric string containing the total number of parts in the set. E.g.
312 The 'Set subtitle' frame is intended for the subtitle of the part of
313 a set this track belongs to.
316 The 'ISRC' frame should contain the International Standard Recording
317 Code [ISRC] (12 characters).
320 4.2.2. Involved persons frames
323 The 'Lead artist/Lead performer/Soloist/Performing group' is
324 used for the main artist.
327 The 'Band/Orchestra/Accompaniment' frame is used for additional
328 information about the performers in the recording.
331 The 'Conductor' frame is used for the name of the conductor.
334 The 'Interpreted, remixed, or otherwise modified by' frame contains
335 more information about the people behind a remix and similar
336 interpretations of another existing piece.
339 The 'Original artist/performer' frame is intended for the performer
340 of the original recording, if for example the music in the file
341 should be a cover of a previously released song.
344 The 'Lyricist/Text writer' frame is intended for the writer of the
345 text or lyrics in the recording.
348 The 'Original lyricist/text writer' frame is intended for the
349 text writer of the original recording, if for example the music in
350 the file should be a cover of a previously released song.
353 The 'Composer' frame is intended for the name of the composer.
356 The 'Musician credits list' is intended as a mapping between
357 instruments and the musician that played it. Every odd field is an
358 instrument and every even is an artist or a comma delimited list of
362 The 'Involved people list' is very similar to the musician credits
363 list, but maps between functions, like producer, and names.
366 The 'Encoded by' frame contains the name of the person or
367 organisation that encoded the audio file. This field may contain a
368 copyright message, if the audio file also is copyrighted by the
372 4.2.3. Derived and subjective properties frames
375 The 'BPM' frame contains the number of beats per minute in the
376 main part of the audio. The BPM is an integer and represented as a
380 The 'Length' frame contains the length of the audio file in
381 milliseconds, represented as a numeric string.
384 The 'Initial key' frame contains the musical key in which the sound
385 starts. It is represented as a string with a maximum length of three
386 characters. The ground keys are represented with "A","B","C","D","E",
387 "F" and "G" and halfkeys represented with "b" and "#". Minor is
388 represented as "m", e.g. "Dbm" $00. Off key is represented with an
392 The 'Language' frame should contain the languages of the text or
393 lyrics spoken or sung in the audio. The language is represented with
394 three characters according to ISO-639-2 [ISO-639-2]. If more than one
395 language is used in the text their language codes should follow
396 according to the amount of their usage, e.g. "eng" $00 "sve" $00.
399 The 'Content type', which ID3v1 was stored as a one byte numeric
400 value only, is now a string. You may use one or several of the ID3v1
401 types as numerical strings, or, since the category list would be
402 impossible to maintain with accurate and up to date categories,
403 define your own. Example: "21" $00 "Eurodisco" $00
405 You may also use any of the following keywords:
411 The 'File type' frame indicates which type of audio this tag defines.
412 The following types and refinements are defined:
414 MIME MIME type follows
418 /3 MPEG 1/2 layer III
420 /AAC Advanced audio compression
421 VQF Transform-domain Weighted Interleave Vector Quantisation
422 PCM Pulse Code Modulated audio
424 but other types may be used, but not for these types though. This is
425 used in a similar way to the predefined types in the "TMED" frame,
426 but without parentheses. If this frame is not present audio type is
430 The 'Media type' frame describes from which media the sound
431 originated. This may be a text string or a reference to the
432 predefined media types found in the list below. Example:
435 DIG Other digital media
436 /A Analogue transfer from media
438 ANA Other analogue media
440 /8CA 8-track tape cassette
443 /A Analogue transfer from media
459 /A Analogue transfer from media
462 /A Analogue transfer from media
463 /1 standard, 48 kHz/16 bits, linear
464 /2 mode 2, 32 kHz/16 bits, linear
465 /3 mode 3, 32 kHz/12 bits, non-linear, low speed
466 /4 mode 4, 32 kHz/12 bits, 4 channels
467 /5 mode 5, 44.1 kHz/16 bits, linear
468 /6 mode 6, 44.1 kHz/16 bits, 'wide track' play
471 /A Analogue transfer from media
474 /A Analogue transfer from media
498 MC MC (normal cassette)
499 /4 4.75 cm/s (normal speed for a two sided cassette)
501 /I Type I cassette (ferric/normal)
502 /II Type II cassette (chrome)
503 /III Type III cassette (ferric chrome)
504 /IV Type IV cassette (metal)
511 /I Type I cassette (ferric/normal)
512 /II Type II cassette (chrome)
513 /III Type III cassette (ferric chrome)
514 /IV Type IV cassette (metal)
517 The 'Mood' frame is intended to reflect the mood of the audio with a
518 few keywords, e.g. "Romantic" or "Sad".
521 4.2.4. Rights and license frames
524 The 'Copyright message' frame, in which the string must begin with a
525 year and a space character (making five characters), is intended for
526 the copyright holder of the original sound, not the audio file
527 itself. The absence of this frame means only that the copyright
528 information is unavailable or has been removed, and must not be
529 interpreted to mean that the audio is public domain. Every time this
530 field is displayed the field must be preceded with "Copyright " (C) "
531 ", where (C) is one character showing a C in a circle.
534 The 'Produced notice' frame, in which the string must begin with a
535 year and a space character (making five characters), is intended for
536 the production copyright holder of the original sound, not the audio
537 file itself. The absence of this frame means only that the production
538 copyright information is unavailable or has been removed, and must
539 not be interpreted to mean that the audio is public domain. Every
540 time this field is displayed the field must be preceded with
541 "Produced " (P) " ", where (P) is one character showing a P in a
545 The 'Publisher' frame simply contains the name of the label or
549 The 'File owner/licensee' frame contains the name of the owner or
550 licensee of the file and it's contents.
553 The 'Internet radio station name' frame contains the name of the
554 internet radio station from which the audio is streamed.
557 The 'Internet radio station owner' frame contains the name of the
558 owner of the internet radio station from which the audio is
561 4.2.5. Other text frames
564 The 'Original filename' frame contains the preferred filename for the
565 file, since some media doesn't allow the desired length of the
566 filename. The filename is case sensitive and includes its suffix.
569 The 'Playlist delay' defines the numbers of milliseconds of silence
570 that should be inserted before this audio. The value zero indicates
571 that this is a part of a multifile audio track that should be played
575 The 'Encoding time' frame contains a timestamp describing when the
576 audio was encoded. Timestamp format is described in the ID3v2
577 structure document [ID3v2-strct].
580 The 'Original release time' frame contains a timestamp describing
581 when the original recording of the audio was released. Timestamp
582 format is described in the ID3v2 structure document [ID3v2-strct].
585 The 'Recording time' frame contains a timestamp describing when the
586 audio was recorded. Timestamp format is described in the ID3v2
587 structure document [ID3v2-strct].
590 The 'Release time' frame contains a timestamp describing when the
591 audio was first released. Timestamp format is described in the ID3v2
592 structure document [ID3v2-strct].
595 The 'Tagging time' frame contains a timestamp describing then the
596 audio was tagged. Timestamp format is described in the ID3v2
597 structure document [ID3v2-strct].
600 The 'Software/Hardware and settings used for encoding' frame
601 includes the used audio encoder and its settings when the file was
602 encoded. Hardware refers to hardware encoders, not the computer on
603 which a program was run.
606 The 'Album sort order' frame defines a string which should be used
607 instead of the album name (TALB) for sorting purposes. E.g. an album
608 named "A Soundtrack" might preferably be sorted as "Soundtrack".
611 The 'Performer sort order' frame defines a string which should be
612 used instead of the performer (TPE2) for sorting purposes.
615 The 'Title sort order' frame defines a string which should be used
616 instead of the title (TIT2) for sorting purposes.
619 4.2.6. User defined text information frame
621 This frame is intended for one-string text information concerning the
622 audio file in a similar way to the other "T"-frames. The frame body
623 consists of a description of the string, represented as a terminated
624 string, followed by the actual string. There may be more than one
625 "TXXX" frame in each tag, but only one with the same description.
627 <Header for 'User defined text information frame', ID: "TXXX">
629 Description <text string according to encoding> $00 (00)
630 Value <text string according to encoding>
635 With these frames dynamic data such as webpages with touring
636 information, price information or plain ordinary news can be added to
637 the tag. There may only be one URL [URL] link frame of its kind in an
638 tag, except when stated otherwise in the frame description. If the
639 text string is followed by a string termination, all the following
640 information should be ignored and not be displayed. All URL link
641 frame identifiers begins with "W". Only URL link frame identifiers
642 begins with "W", except for "WXXX". All URL link frames have the
645 <Header for 'URL link frame', ID: "W000" - "WZZZ", excluding "WXXX"
650 4.3.1. URL link frames - details
653 The 'Commercial information' frame is a URL pointing at a webpage
654 with information such as where the album can be bought. There may be
655 more than one "WCOM" frame in a tag, but not with the same content.
658 The 'Copyright/Legal information' frame is a URL pointing at a
659 webpage where the terms of use and ownership of the file is
663 The 'Official audio file webpage' frame is a URL pointing at a file
667 The 'Official artist/performer webpage' frame is a URL pointing at
668 the artists official webpage. There may be more than one "WOAR" frame
669 in a tag if the audio contains more than one performer, but not with
673 The 'Official audio source webpage' frame is a URL pointing at the
674 official webpage for the source of the audio file, e.g. a movie.
677 The 'Official Internet radio station homepage' contains a URL
678 pointing at the homepage of the internet radio station.
681 The 'Payment' frame is a URL pointing at a webpage that will handle
682 the process of paying for this file.
685 The 'Publishers official webpage' frame is a URL pointing at the
686 official webpage for the publisher.
689 4.3.2. User defined URL link frame
691 This frame is intended for URL [URL] links concerning the audio file
692 in a similar way to the other "W"-frames. The frame body consists
693 of a description of the string, represented as a terminated string,
694 followed by the actual URL. The URL is always encoded with ISO-8859-1
695 [ISO-8859-1]. There may be more than one "WXXX" frame in each tag,
696 but only one with the same description.
698 <Header for 'User defined URL link frame', ID: "WXXX">
700 Description <text string according to encoding> $00 (00)
704 4.4. Music CD identifier
706 This frame is intended for music that comes from a CD, so that the CD
707 can be identified in databases such as the CDDB [CDDB]. The frame
708 consists of a binary dump of the Table Of Contents, TOC, from the CD,
709 which is a header of 4 bytes and then 8 bytes/track on the CD plus 8
710 bytes for the 'lead out', making a maximum of 804 bytes. The offset
711 to the beginning of every track on the CD should be described with a
712 four bytes absolute CD-frame address per track, and not with absolute
713 time. When this frame is used the presence of a valid "TRCK" frame is
714 REQUIRED, even if the CD's only got one track. It is recommended that
715 this frame is always added to tags originating from CDs. There may
716 only be one "MCDI" frame in each tag.
718 <Header for 'Music CD identifier', ID: "MCDI">
722 4.5. Event timing codes
724 This frame allows synchronisation with key events in the audio. The
727 <Header for 'Event timing codes', ID: "ETCO">
728 Time stamp format $xx
730 Where time stamp format is:
732 $01 Absolute time, 32 bit sized, using MPEG [MPEG] frames as unit
733 $02 Absolute time, 32 bit sized, using milliseconds as unit
735 Absolute time means that every stamp contains the time from the
736 beginning of the file.
738 Followed by a list of key events in the following format:
741 Time stamp $xx (xx ...)
743 The 'Time stamp' is set to zero if directly at the beginning of the
744 sound or after the previous event. All events MUST be sorted in
745 chronological order. The type of event is as follows:
747 $00 padding (has no meaning)
748 $01 end of initial silence
760 $0D momentary unwanted noise (Snap, Crackle & Pop)
762 $0F sustained noise end
771 $17-$DF reserved for future use
773 $E0-$EF not predefined synch 0-F
775 $F0-$FC reserved for future use
777 $FD audio end (start of silence)
779 $FF one more byte of events follows (all the following bytes with
780 the value $FF have the same function)
782 Terminating the start events such as "intro start" is OPTIONAL. The
783 'Not predefined synch's ($E0-EF) are for user events. You might want
784 to synchronise your music to something, like setting off an explosion
785 on-stage, activating a screensaver etc.
787 There may only be one "ETCO" frame in each tag.
790 4.6. MPEG location lookup table
792 To increase performance and accuracy of jumps within a MPEG [MPEG]
793 audio file, frames with time codes in different locations in the file
794 might be useful. This ID3v2 frame includes references that the
795 software can use to calculate positions in the file. After the frame
796 header follows a descriptor of how much the 'frame counter' should be
797 increased for every reference. If this value is two then the first
798 reference points out the second frame, the 2nd reference the 4th
799 frame, the 3rd reference the 6th frame etc. In a similar way the
800 'bytes between reference' and 'milliseconds between reference' points
801 out bytes and milliseconds respectively.
803 Each reference consists of two parts; a certain number of bits, as
804 defined in 'bits for bytes deviation', that describes the difference
805 between what is said in 'bytes between reference' and the reality and
806 a certain number of bits, as defined in 'bits for milliseconds
807 deviation', that describes the difference between what is said in
808 'milliseconds between reference' and the reality. The number of bits
809 in every reference, i.e. 'bits for bytes deviation'+'bits for
810 milliseconds deviation', must be a multiple of four. There may only
811 be one "MLLT" frame in each tag.
813 <Header for 'Location lookup table', ID: "MLLT">
814 MPEG frames between reference $xx xx
815 Bytes between reference $xx xx xx
816 Milliseconds between reference $xx xx xx
817 Bits for bytes deviation $xx
818 Bits for milliseconds dev. $xx
820 Then for every reference the following data is included;
822 Deviation in bytes %xxx....
823 Deviation in milliseconds %xxx....
826 4.7. Synchronised tempo codes
828 For a more accurate description of the tempo of a musical piece, this
829 frame might be used. After the header follows one byte describing
830 which time stamp format should be used. Then follows one or more
831 tempo codes. Each tempo code consists of one tempo part and one time
832 part. The tempo is in BPM described with one or two bytes. If the
833 first byte has the value $FF, one more byte follows, which is added
834 to the first giving a range from 2 - 510 BPM, since $00 and $01 is
835 reserved. $00 is used to describe a beat-free time period, which is
836 not the same as a music-free time period. $01 is used to indicate one
837 single beat-stroke followed by a beat-free period.
839 The tempo descriptor is followed by a time stamp. Every time the
840 tempo in the music changes, a tempo descriptor may indicate this for
841 the player. All tempo descriptors MUST be sorted in chronological
842 order. The first beat-stroke in a time-period is at the same time as
843 the beat description occurs. There may only be one "SYTC" frame in
846 <Header for 'Synchronised tempo codes', ID: "SYTC">
847 Time stamp format $xx
848 Tempo data <binary data>
850 Where time stamp format is:
852 $01 Absolute time, 32 bit sized, using MPEG [MPEG] frames as unit
853 $02 Absolute time, 32 bit sized, using milliseconds as unit
855 Absolute time means that every stamp contains the time from the
856 beginning of the file.
859 4.8. Unsynchronised lyrics/text transcription
861 This frame contains the lyrics of the song or a text transcription of
862 other vocal activities. The head includes an encoding descriptor and
863 a content descriptor. The body consists of the actual text. The
864 'Content descriptor' is a terminated string. If no descriptor is
865 entered, 'Content descriptor' is $00 (00) only. Newline characters
866 are allowed in the text. There may be more than one 'Unsynchronised
867 lyrics/text transcription' frame in each tag, but only one with the
868 same language and content descriptor.
870 <Header for 'Unsynchronised lyrics/text transcription', ID: "USLT">
873 Content descriptor <text string according to encoding> $00 (00)
874 Lyrics/text <full text string according to encoding>
877 4.9. Synchronised lyrics/text
879 This is another way of incorporating the words, said or sung lyrics,
880 in the audio file as text, this time, however, in sync with the
881 audio. It might also be used to describing events e.g. occurring on a
882 stage or on the screen in sync with the audio. The header includes a
883 content descriptor, represented with as terminated text string. If no
884 descriptor is entered, 'Content descriptor' is $00 (00) only.
886 <Header for 'Synchronised lyrics/text', ID: "SYLT">
889 Time stamp format $xx
891 Content descriptor <text string according to encoding> $00 (00)
893 Content type: $00 is other
895 $02 is text transcription
896 $03 is movement/part name (e.g. "Adagio")
897 $04 is events (e.g. "Don Quijote enters the stage")
898 $05 is chord (e.g. "Bb F Fsus")
899 $06 is trivia/'pop up' information
900 $07 is URLs to webpages
901 $08 is URLs to images
905 $01 Absolute time, 32 bit sized, using MPEG [MPEG] frames as unit
906 $02 Absolute time, 32 bit sized, using milliseconds as unit
908 Absolute time means that every stamp contains the time from the
909 beginning of the file.
911 The text that follows the frame header differs from that of the
912 unsynchronised lyrics/text transcription in one major way. Each
913 syllable (or whatever size of text is considered to be convenient by
914 the encoder) is a null terminated string followed by a time stamp
915 denoting where in the sound file it belongs. Each sync thus has the
918 Terminated text to be synced (typically a syllable)
919 Sync identifier (terminator to above string) $00 (00)
920 Time stamp $xx (xx ...)
922 The 'time stamp' is set to zero or the whole sync is omitted if
923 located directly at the beginning of the sound. All time stamps
924 should be sorted in chronological order. The sync can be considered
925 as a validator of the subsequent string.
927 Newline characters are allowed in all "SYLT" frames and MUST be used
928 after every entry (name, event etc.) in a frame with the content type
931 A few considerations regarding whitespace characters: Whitespace
932 separating words should mark the beginning of a new word, thus
933 occurring in front of the first syllable of a new word. This is also
934 valid for new line characters. A syllable followed by a comma should
935 not be broken apart with a sync (both the syllable and the comma
936 should be before the sync).
938 An example: The "USLT" passage
940 "Strangers in the night" $0A "Exchanging glances"
942 would be "SYLT" encoded as:
944 "Strang" $00 xx xx "ers" $00 xx xx " in" $00 xx xx " the" $00 xx xx
945 " night" $00 xx xx 0A "Ex" $00 xx xx "chang" $00 xx xx "ing" $00 xx
946 xx "glan" $00 xx xx "ces" $00 xx xx
948 There may be more than one "SYLT" frame in each tag, but only one
949 with the same language and content descriptor.
954 This frame is intended for any kind of full text information that
955 does not fit in any other frame. It consists of a frame header
956 followed by encoding, language and content descriptors and is ended
957 with the actual comment as a text string. Newline characters are
958 allowed in the comment text string. There may be more than one
959 comment frame in each tag, but only one with the same language and
962 <Header for 'Comment', ID: "COMM">
965 Short content descrip. <text string according to encoding> $00 (00)
966 The actual text <full text string according to encoding>
969 4.11. Relative volume adjustment (2)
971 This is a more subjective frame than the previous ones. It allows the
972 user to say how much he wants to increase/decrease the volume on each
973 channel when the file is played. The purpose is to be able to align
974 all files to a reference volume, so that you don't have to change the
975 volume constantly. This frame may also be used to balance adjust the
976 audio. The volume adjustment is encoded as a fixed point decibel
977 value, 16 bit signed integer representing (adjustment*512), giving
978 +/- 64 dB with a precision of 0.001953125 dB. E.g. +2 dB is stored as
979 $04 00 and -2 dB is $FC 00. There may be more than one "RVA2" frame
980 in each tag, but only one with the same identification string.
982 <Header for 'Relative volume adjustment (2)', ID: "RVA2">
983 Identification <text string> $00
985 The 'identification' string is used to identify the situation and/or
986 device where this adjustment should apply. The following is then
987 repeated for every channel
990 Volume adjustment $xx xx
991 Bits representing peak $xx
992 Peak volume $xx (xx ...)
995 Type of channel: $00 Other
1005 Bits representing peak can be any number between 0 and 255. 0 means
1006 that there is no peak volume field. The peak volume field is always
1007 padded to whole bytes, setting the most significant bits to zero.
1010 4.12. Equalisation (2)
1012 This is another subjective, alignment frame. It allows the user to
1013 predefine an equalisation curve within the audio file. There may be
1014 more than one "EQU2" frame in each tag, but only one with the same
1015 identification string.
1017 <Header of 'Equalisation (2)', ID: "EQU2">
1018 Interpolation method $xx
1019 Identification <text string> $00
1021 The 'interpolation method' describes which method is preferred when
1022 an interpolation between the adjustment point that follows. The
1023 following methods are currently defined:
1026 No interpolation is made. A jump from one adjustment level to
1027 another occurs in the middle between two adjustment points.
1029 Interpolation between adjustment points is linear.
1031 The 'identification' string is used to identify the situation and/or
1032 device where this adjustment should apply. The following is then
1033 repeated for every adjustment point
1036 Volume adjustment $xx xx
1038 The frequency is stored in units of 1/2 Hz, giving it a range from 0
1041 The volume adjustment is encoded as a fixed point decibel value, 16
1042 bit signed integer representing (adjustment*512), giving +/- 64 dB
1043 with a precision of 0.001953125 dB. E.g. +2 dB is stored as $04 00
1044 and -2 dB is $FC 00.
1046 Adjustment points should be ordered by frequency and one frequency
1047 should only be described once in the frame.
1052 Yet another subjective frame, with which you can adjust echoes of
1053 different kinds. Reverb left/right is the delay between every bounce
1054 in ms. Reverb bounces left/right is the number of bounces that should
1055 be made. $FF equals an infinite number of bounces. Feedback is the
1056 amount of volume that should be returned to the next echo bounce. $00
1057 is 0%, $FF is 100%. If this value were $7F, there would be 50% volume
1058 reduction on the first bounce, 50% of that on the second and so on.
1059 Left to left means the sound from the left bounce to be played in the
1060 left speaker, while left to right means sound from the left bounce to
1061 be played in the right speaker.
1063 'Premix left to right' is the amount of left sound to be mixed in the
1064 right before any reverb is applied, where $00 id 0% and $FF is 100%.
1065 'Premix right to left' does the same thing, but right to left.
1066 Setting both premix to $FF would result in a mono output (if the
1067 reverb is applied symmetric). There may only be one "RVRB" frame in
1070 <Header for 'Reverb', ID: "RVRB">
1071 Reverb left (ms) $xx xx
1072 Reverb right (ms) $xx xx
1073 Reverb bounces, left $xx
1074 Reverb bounces, right $xx
1075 Reverb feedback, left to left $xx
1076 Reverb feedback, left to right $xx
1077 Reverb feedback, right to right $xx
1078 Reverb feedback, right to left $xx
1079 Premix left to right $xx
1080 Premix right to left $xx
1083 4.14. Attached picture
1085 This frame contains a picture directly related to the audio file.
1086 Image format is the MIME type and subtype [MIME] for the image. In
1087 the event that the MIME media type name is omitted, "image/" will be
1088 implied. The "image/png" [PNG] or "image/jpeg" [JFIF] picture format
1089 should be used when interoperability is wanted. Description is a
1090 short description of the picture, represented as a terminated
1091 text string. There may be several pictures attached to one file, each
1092 in their individual "APIC" frame, but only one with the same content
1093 descriptor. There may only be one picture with the picture type
1094 declared as picture type $01 and $02 respectively. There is the
1095 possibility to put only a link to the image file by using the 'MIME
1096 type' "-->" and having a complete URL [URL] instead of picture data.
1097 The use of linked files should however be used sparingly since there
1098 is the risk of separation of files.
1100 <Header for 'Attached picture', ID: "APIC">
1102 MIME type <text string> $00
1104 Description <text string according to encoding> $00 (00)
1105 Picture data <binary data>
1108 Picture type: $00 Other
1109 $01 32x32 pixels 'file icon' (PNG only)
1114 $06 Media (e.g. label side of CD)
1115 $07 Lead artist/lead performer/soloist
1116 $08 Artist/performer
1120 $0C Lyricist/text writer
1121 $0D Recording Location
1122 $0E During recording
1123 $0F During performance
1124 $10 Movie/video screen capture
1125 $11 A bright coloured fish
1127 $13 Band/artist logotype
1128 $14 Publisher/Studio logotype
1131 4.15. General encapsulated object
1133 In this frame any type of file can be encapsulated. After the header,
1134 'Frame size' and 'Encoding' follows 'MIME type' [MIME] represented as
1135 as a terminated string encoded with ISO 8859-1 [ISO-8859-1]. The
1136 filename is case sensitive and is encoded as 'Encoding'. Then follows
1137 a content description as terminated string, encoded as 'Encoding'.
1138 The last thing in the frame is the actual object. The first two
1139 strings may be omitted, leaving only their terminations. MIME type is
1140 always an ISO-8859-1 text string. There may be more than one "GEOB"
1141 frame in each tag, but only one with the same content descriptor.
1143 <Header for 'General encapsulated object', ID: "GEOB">
1145 MIME type <text string> $00
1146 Filename <text string according to encoding> $00 (00)
1147 Content description <text string according to encoding> $00 (00)
1148 Encapsulated object <binary data>
1153 This is simply a counter of the number of times a file has been
1154 played. The value is increased by one every time the file begins to
1155 play. There may only be one "PCNT" frame in each tag. When the
1156 counter reaches all one's, one byte is inserted in front of the
1157 counter thus making the counter eight bits bigger. The counter must
1158 be at least 32-bits long to begin with.
1160 <Header for 'Play counter', ID: "PCNT">
1161 Counter $xx xx xx xx (xx ...)
1166 The purpose of this frame is to specify how good an audio file is.
1167 Many interesting applications could be found to this frame such as a
1168 playlist that features better audio files more often than others or
1169 it could be used to profile a person's taste and find other 'good'
1170 files by comparing people's profiles. The frame contains the email
1171 address to the user, one rating byte and a four byte play counter,
1172 intended to be increased with one for every time the file is played.
1173 The email is a terminated string. The rating is 1-255 where 1 is
1174 worst and 255 is best. 0 is unknown. If no personal counter is wanted
1175 it may be omitted. When the counter reaches all one's, one byte is
1176 inserted in front of the counter thus making the counter eight bits
1177 bigger in the same away as the play counter ("PCNT"). There may be
1178 more than one "POPM" frame in each tag, but only one with the same
1181 <Header for 'Popularimeter', ID: "POPM">
1182 Email to user <text string> $00
1184 Counter $xx xx xx xx (xx ...)
1187 4.18. Recommended buffer size
1189 Sometimes the server from which an audio file is streamed is aware of
1190 transmission or coding problems resulting in interruptions in the
1191 audio stream. In these cases, the size of the buffer can be
1192 recommended by the server using this frame. If the 'embedded info
1193 flag' is true (1) then this indicates that an ID3 tag with the
1194 maximum size described in 'Buffer size' may occur in the audio
1195 stream. In such case the tag should reside between two MPEG [MPEG]
1196 frames, if the audio is MPEG encoded. If the position of the next tag
1197 is known, 'offset to next tag' may be used. The offset is calculated
1198 from the end of tag in which this frame resides to the first byte of
1199 the header in the next. This field may be omitted. Embedded tags are
1200 generally not recommended since this could render unpredictable
1201 behaviour from present software/hardware.
1203 For applications like streaming audio it might be an idea to embed
1204 tags into the audio stream though. If the clients connects to
1205 individual connections like HTTP and there is a possibility to begin
1206 every transmission with a tag, then this tag should include a
1207 'recommended buffer size' frame. If the client is connected to a
1208 arbitrary point in the stream, such as radio or multicast, then the
1209 'recommended buffer size' frame SHOULD be included in every tag.
1211 The 'Buffer size' should be kept to a minimum. There may only be one
1212 "RBUF" frame in each tag.
1214 <Header for 'Recommended buffer size', ID: "RBUF">
1215 Buffer size $xx xx xx
1216 Embedded info flag %0000000x
1217 Offset to next tag $xx xx xx xx
1220 4.19. Audio encryption
1222 This frame indicates if the actual audio stream is encrypted, and by
1223 whom. Since standardisation of such encryption scheme is beyond this
1224 document, all "AENC" frames begin with a terminated string with a
1225 URL containing an email address, or a link to a location where an
1226 email address can be found, that belongs to the organisation
1227 responsible for this specific encrypted audio file. Questions
1228 regarding the encrypted audio should be sent to the email address
1229 specified. If a $00 is found directly after the 'Frame size' and the
1230 audio file indeed is encrypted, the whole file may be considered
1233 After the 'Owner identifier', a pointer to an unencrypted part of the
1234 audio can be specified. The 'Preview start' and 'Preview length' is
1235 described in frames. If no part is unencrypted, these fields should
1236 be left zeroed. After the 'preview length' field follows optionally a
1237 data block required for decryption of the audio. There may be more
1238 than one "AENC" frames in a tag, but only one with the same 'Owner
1241 <Header for 'Audio encryption', ID: "AENC">
1242 Owner identifier <text string> $00
1243 Preview start $xx xx
1244 Preview length $xx xx
1245 Encryption info <binary data>
1248 4.20. Linked information
1250 To keep information duplication as low as possible this frame may be
1251 used to link information from another ID3v2 tag that might reside in
1252 another audio file or alone in a binary file. It is RECOMMENDED that
1253 this method is only used when the files are stored on a CD-ROM or
1254 other circumstances when the risk of file separation is low. The
1255 frame contains a frame identifier, which is the frame that should be
1256 linked into this tag, a URL [URL] field, where a reference to the
1257 file where the frame is given, and additional ID data, if needed.
1258 Data should be retrieved from the first tag found in the file to
1259 which this link points. There may be more than one "LINK" frame in a
1260 tag, but only one with the same contents. A linked frame is to be
1261 considered as part of the tag and has the same restrictions as if it
1262 was a physical part of the tag (i.e. only one "RVRB" frame allowed,
1263 whether it's linked or not).
1265 <Header for 'Linked information', ID: "LINK">
1266 Frame identifier $xx xx xx xx
1267 URL <text string> $00
1268 ID and additional data <text string(s)>
1270 Frames that may be linked and need no additional data are "ASPI",
1271 "ETCO", "EQU2", "MCID", "MLLT", "OWNE", "RVA2", "RVRB", "SYTC", the
1272 text information frames and the URL link frames.
1274 The "AENC", "APIC", "GEOB" and "TXXX" frames may be linked with
1275 the content descriptor as additional ID data.
1277 The "USER" frame may be linked with the language field as additional
1280 The "PRIV" frame may be linked with the owner identifier as
1283 The "COMM", "SYLT" and "USLT" frames may be linked with three bytes
1284 of language descriptor directly followed by a content descriptor as
1288 4.21. Position synchronisation frame
1290 This frame delivers information to the listener of how far into the
1291 audio stream he picked up; in effect, it states the time offset from
1292 the first frame in the stream. The frame layout is:
1294 <Head for 'Position synchronisation', ID: "POSS">
1295 Time stamp format $xx
1296 Position $xx (xx ...)
1298 Where time stamp format is:
1300 $01 Absolute time, 32 bit sized, using MPEG frames as unit
1301 $02 Absolute time, 32 bit sized, using milliseconds as unit
1303 and position is where in the audio the listener starts to receive,
1304 i.e. the beginning of the next frame. If this frame is used in the
1305 beginning of a file the value is always 0. There may only be one
1306 "POSS" frame in each tag.
1309 4.22. Terms of use frame
1311 This frame contains a brief description of the terms of use and
1312 ownership of the file. More detailed information concerning the legal
1313 terms might be available through the "WCOP" frame. Newlines are
1314 allowed in the text. There may be more than one 'Terms of use' frame
1315 in a tag, but only one with the same 'Language'.
1317 <Header for 'Terms of use frame', ID: "USER">
1320 The actual text <text string according to encoding>
1323 4.23. Ownership frame
1325 The ownership frame might be used as a reminder of a made transaction
1326 or, if signed, as proof. Note that the "USER" and "TOWN" frames are
1327 good to use in conjunction with this one. The frame begins, after the
1328 frame ID, size and encoding fields, with a 'price paid' field. The
1329 first three characters of this field contains the currency used for
1330 the transaction, encoded according to ISO 4217 [ISO-4217] alphabetic
1331 currency code. Concatenated to this is the actual price paid, as a
1332 numerical string using "." as the decimal separator. Next is an 8
1333 character date string (YYYYMMDD) followed by a string with the name
1334 of the seller as the last field in the frame. There may only be one
1335 "OWNE" frame in a tag.
1337 <Header for 'Ownership frame', ID: "OWNE">
1339 Price paid <text string> $00
1340 Date of purch. <text string>
1341 Seller <text string according to encoding>
1344 4.24. Commercial frame
1346 This frame enables several competing offers in the same tag by
1347 bundling all needed information. That makes this frame rather complex
1348 but it's an easier solution than if one tries to achieve the same
1349 result with several frames. The frame begins, after the frame ID,
1350 size and encoding fields, with a price string field. A price is
1351 constructed by one three character currency code, encoded according
1352 to ISO 4217 [ISO-4217] alphabetic currency code, followed by a
1353 numerical value where "." is used as decimal separator. In the price
1354 string several prices may be concatenated, separated by a "/"
1355 character, but there may only be one currency of each type.
1357 The price string is followed by an 8 character date string in the
1358 format YYYYMMDD, describing for how long the price is valid. After
1359 that is a contact URL, with which the user can contact the seller,
1360 followed by a one byte 'received as' field. It describes how the
1361 audio is delivered when bought according to the following list:
1364 $01 Standard CD album with other songs
1365 $02 Compressed audio on CD
1366 $03 File over the Internet
1367 $04 Stream over the Internet
1369 $06 As note sheets in a book with other sheets
1370 $07 Music on other media
1371 $08 Non-musical merchandise
1373 Next follows a terminated string with the name of the seller followed
1374 by a terminated string with a short description of the product. The
1375 last thing is the ability to include a company logotype. The first of
1376 them is the 'Picture MIME type' field containing information about
1377 which picture format is used. In the event that the MIME media type
1378 name is omitted, "image/" will be implied. Currently only "image/png"
1379 and "image/jpeg" are allowed. This format string is followed by the
1380 binary picture data. This two last fields may be omitted if no
1381 picture is attached. There may be more than one 'commercial frame' in
1382 a tag, but no two may be identical.
1384 <Header for 'Commercial frame', ID: "COMR">
1386 Price string <text string> $00
1387 Valid until <text string>
1388 Contact URL <text string> $00
1390 Name of seller <text string according to encoding> $00 (00)
1391 Description <text string according to encoding> $00 (00)
1392 Picture MIME type <string> $00
1393 Seller logo <binary data>
1396 4.25. Encryption method registration
1398 To identify with which method a frame has been encrypted the
1399 encryption method must be registered in the tag with this frame. The
1400 'Owner identifier' is a null-terminated string with a URL [URL]
1401 containing an email address, or a link to a location where an email
1402 address can be found, that belongs to the organisation responsible
1403 for this specific encryption method. Questions regarding the
1404 encryption method should be sent to the indicated email address. The
1405 'Method symbol' contains a value that is associated with this method
1406 throughout the whole tag, in the range $80-F0. All other values are
1407 reserved. The 'Method symbol' may optionally be followed by
1408 encryption specific data. There may be several "ENCR" frames in a tag
1409 but only one containing the same symbol and only one containing the
1410 same owner identifier. The method must be used somewhere in the tag.
1411 See the description of the frame encryption flag in the ID3v2
1412 structure document [ID3v2-strct] for more information.
1414 <Header for 'Encryption method registration', ID: "ENCR">
1415 Owner identifier <text string> $00
1417 Encryption data <binary data>
1420 4.26. Group identification registration
1422 This frame enables grouping of otherwise unrelated frames. This can
1423 be used when some frames are to be signed. To identify which frames
1424 belongs to a set of frames a group identifier must be registered in
1425 the tag with this frame. The 'Owner identifier' is a null-terminated
1426 string with a URL [URL] containing an email address, or a link to a
1427 location where an email address can be found, that belongs to the
1428 organisation responsible for this grouping. Questions regarding the
1429 grouping should be sent to the indicated email address. The 'Group
1430 symbol' contains a value that associates the frame with this group
1431 throughout the whole tag, in the range $80-F0. All other values are
1432 reserved. The 'Group symbol' may optionally be followed by some group
1433 specific data, e.g. a digital signature. There may be several "GRID"
1434 frames in a tag but only one containing the same symbol and only one
1435 containing the same owner identifier. The group symbol must be used
1436 somewhere in the tag. See the description of the frame grouping flag
1437 in the ID3v2 structure document [ID3v2-strct] for more information.
1439 <Header for 'Group ID registration', ID: "GRID">
1440 Owner identifier <text string> $00
1442 Group dependent data <binary data>
1447 This frame is used to contain information from a software producer
1448 that its program uses and does not fit into the other frames. The
1449 frame consists of an 'Owner identifier' string and the binary data.
1450 The 'Owner identifier' is a null-terminated string with a URL [URL]
1451 containing an email address, or a link to a location where an email
1452 address can be found, that belongs to the organisation responsible
1453 for the frame. Questions regarding the frame should be sent to the
1454 indicated email address. The tag may contain more than one "PRIV"
1455 frame but only with different contents.
1457 <Header for 'Private frame', ID: "PRIV">
1458 Owner identifier <text string> $00
1459 The private data <binary data>
1462 4.28. Signature frame
1464 This frame enables a group of frames, grouped with the 'Group
1465 identification registration', to be signed. Although signatures can
1466 reside inside the registration frame, it might be desired to store
1467 the signature elsewhere, e.g. in watermarks. There may be more than
1468 one 'signature frame' in a tag, but no two may be identical.
1470 <Header for 'Signature frame', ID: "SIGN">
1472 Signature <binary data>
1477 This frame indicates where other tags in a file/stream can be found.
1478 The 'minimum offset to next tag' is calculated from the end of this
1479 tag to the beginning of the next. There may only be one 'seek frame'
1482 <Header for 'Seek frame', ID: "SEEK">
1483 Minimum offset to next tag $xx xx xx xx
1486 4.30. Audio seek point index
1488 Audio files with variable bit rates are intrinsically difficult to
1489 deal with in the case of seeking within the file. The ASPI frame
1490 makes seeking easier by providing a list a seek points within the
1491 audio file. The seek points are a fractional offset within the audio
1492 data, providing a starting point from which to find an appropriate
1493 point to start decoding. The presence of an ASPI frame requires the
1494 existence of a TLEN frame, indicating the duration of the file in
1495 milliseconds. There may only be one 'audio seek point index' frame in
1498 <Header for 'Seek Point Index', ID: "ASPI">
1499 Indexed data start (S) $xx xx xx xx
1500 Indexed data length (L) $xx xx xx xx
1501 Number of index points (N) $xx xx
1502 Bits per index point (b) $xx
1504 Then for every index point the following data is included;
1506 Fraction at index (Fi) $xx (xx)
1508 'Indexed data start' is a byte offset from the beginning of the file.
1509 'Indexed data length' is the byte length of the audio data being
1510 indexed. 'Number of index points' is the number of index points, as
1511 the name implies. The recommended number is 100. 'Bits per index
1512 point' is 8 or 16, depending on the chosen precision. 8 bits works
1513 well for short files (less than 5 minutes of audio), while 16 bits is
1514 advantageous for long files. 'Fraction at index' is the numerator of
1515 the fraction representing a relative position in the data. The
1516 denominator is 2 to the power of b.
1518 Here are the algorithms to be used in the calculation. The known data
1519 must be the offset of the start of the indexed data (S), the offset
1520 of the end of the indexed data (E), the number of index points (N),
1521 the offset at index i (Oi). We calculate the fraction at index i
1524 Oi is the offset of the frame whose start is soonest after the point
1525 for which the time offset is (i/N * duration).
1527 The frame data should be calculated as follows:
1529 Fi = Oi/L * 2^b (rounded down to the nearest integer)
1531 Offset calculation should be calculated as follows from data in the
1534 Oi = (Fi/2^b)*L (rounded up to the nearest integer)
1539 Copyright (C) Martin Nilsson 2000. All Rights Reserved.
1541 This document and translations of it may be copied and furnished to
1542 others, and derivative works that comment on or otherwise explain it
1543 or assist in its implementation may be prepared, copied, published
1544 and distributed, in whole or in part, without restriction of any
1545 kind, provided that a reference to this document is included on all
1546 such copies and derivative works. However, this document itself may
1547 not be modified in any way and reissued as the original document.
1549 The limited permissions granted above are perpetual and will not be
1552 This document and the information contained herein is provided on an
1553 "AS IS" basis and THE AUTHORS DISCLAIMS ALL WARRANTIES, EXPRESS OR
1554 IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
1555 THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
1556 WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
1561 [CDDB] Compact Disc Data Base
1563 <url:http://www.cddb.com>
1565 [ID3v2.3.0] Martin Nilsson, "ID3v2 informal standard".
1567 <url:http://www.id3.org/id3v2.3.0.txt>
1569 [ID3v2-strct] Martin Nilsson,
1570 "ID3 tag version 2.4.0 - Main Structure"
1572 <url:http//www.id3.org/id3v2.4.0-structure.txt>
1574 [ISO-639-2] ISO/FDIS 639-2.
1575 Codes for the representation of names of languages, Part 2: Alpha-3
1576 code. Technical committee / subcommittee: TC 37 / SC 2
1578 [ISO-4217] ISO 4217:1995.
1579 Codes for the representation of currencies and funds.
1580 Technical committee / subcommittee: TC 68
1582 [ISO-8859-1] ISO/IEC DIS 8859-1.
1583 8-bit single-byte coded graphic character sets, Part 1: Latin
1584 alphabet No. 1. Technical committee / subcommittee: JTC 1 / SC 2
1586 [ISRC] ISO 3901:1986
1587 International Standard Recording Code (ISRC).
1588 Technical committee / subcommittee: TC 46 / SC 9
1590 [JFIF] JPEG File Interchange Format, version 1.02
1592 <url:http://www.w3.org/Graphics/JPEG/jfif.txt>
1594 [KEYWORDS] S. Bradner, 'Key words for use in RFCs to Indicate
1595 Requirement Levels', RFC 2119, March 1997.
1597 <url:ftp://ftp.isi.edu/in-notes/rfc2119.txt>
1599 [MIME] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
1600 Extensions (MIME) Part One: Format of Internet Message Bodies",
1601 RFC 2045, November 1996.
1603 <url:ftp://ftp.isi.edu/in-notes/rfc2045.txt>
1605 [MPEG] ISO/IEC 11172-3:1993.
1606 Coding of moving pictures and associated audio for digital storage
1607 media at up to about 1,5 Mbit/s, Part 3: Audio.
1608 Technical committee / subcommittee: JTC 1 / SC 29
1610 ISO/IEC 13818-3:1995
1611 Generic coding of moving pictures and associated audio information,
1613 Technical committee / subcommittee: JTC 1 / SC 29
1616 Generic coding of moving pictures and associated audio information,
1617 Part 3: Audio (Revision of ISO/IEC 13818-3:1995)
1620 [PNG] Portable Network Graphics, version 1.0
1622 <url:http://www.w3.org/TR/REC-png-multi.html>
1624 [URL] T. Berners-Lee, L. Masinter & M. McCahill, "Uniform Resource
1625 Locators (URL).", RFC 1738, December 1994.
1627 <url:ftp://ftp.isi.edu/in-notes/rfc1738.txt>
1629 [ZLIB] P. Deutsch, Aladdin Enterprises & J-L. Gailly, "ZLIB
1631 Data Format Specification version 3.3", RFC 1950, May 1996.
1633 <url:ftp://ftp.isi.edu/in-notes/rfc1950.txt>
1639 A. Appendix A - Genre List from ID3v1
1641 The following genres is defined in ID3v1
1690 47.Instrumental Rock
1694 51.Techno-Industrial
1734 Email: nilsson@id3.org