1 Intel NUC NUC5i5MYBE {#nuc5}
4 Pinmuxing on the 5th generation Intel NUCs is done in the BIOS. This is only
5 tested on bios 0024+ (MYBDWi5v.86A). By default the custom solution header is
6 disabled, currently in Linux (as of 4.2). Both i2c buses are currently
9 The NUCs supported are the NUC5i5MYBE & NUC5i3MYBE which also come as the
10 NUC5i5MYHE and NUC5i3MYHE motherboards. It's possible that others expose the IO
11 in a very similar way so could be supported, get in touch if you have one!
13 In the BIOS you are required to enable the following:
14 Devices -> Onboard Devices - GPIO Lockdown
15 Select I2c under GPIO for the 12/13 14/15 pins
20 **I2C** Depending on your system you may need to load `i2c-dev`
22 Custom Solutions Header mapping
23 -------------------------------
25 The mapping is the same as the DE3815tykhe.
27 | MRAA Number | Physical Pin | Function | Notes |
28 |-------------|--------------|--------------|----------------------|
29 | 0 | 1 | 1.8V sby | |
31 | 2 | 3 | HDMI_CEC | |
32 | 3 | 4 | DMIC_CLK | |
33 | 4 | 5 | 3.3V sby | |
34 | 5 | 6 | DMIC_DATA | |
35 | 6 | 7 | Key (no pin) | |
36 | 7 | 8 | SMB_ALERT# | |
37 | 8 | 9 | 5V sby (2A) | |
38 | 9 | 10 | SCI_SMI_GPIO | |
39 | 10 | 11 | PWM[0] | |
40 | 11 | 12 | PWM[1] | |
41 | 12 | 13 | I2C0_CLK | /dev/i2c-0 SCL |
42 | 13 | 14 | I2C0_DATA | /dev/i2c-0 SDA |
43 | 14 | 15 | I2C1_CLK | /dev/i2c-1 SCL |
44 | 15 | 16 | I2C1_DATA | /dev/i2c-1-SDA |
45 | 16 | 17 | SMB_CLK | |
46 | 17 | 18 | SMB_DATA | |