2 # Run this to generate all the initial makefiles, etc.
5 test -z "$srcdir" && srcdir=.
8 PKG_NAME=${PKG_NAME:-Package}
10 # default version requirements ...
11 REQUIRED_AUTOCONF_VERSION=${REQUIRED_AUTOCONF_VERSION:-2.53}
12 REQUIRED_AUTOMAKE_VERSION=${REQUIRED_AUTOMAKE_VERSION:-1.9}
13 REQUIRED_LIBTOOL_VERSION=${REQUIRED_LIBTOOL_VERSION:-1.4.3}
14 REQUIRED_GETTEXT_VERSION=${REQUIRED_GETTEXT_VERSION:-0.10.40}
15 REQUIRED_GLIB_GETTEXT_VERSION=${REQUIRED_GLIB_GETTEXT_VERSION:-2.2.0}
16 REQUIRED_INTLTOOL_VERSION=${REQUIRED_INTLTOOL_VERSION:-0.25}
17 REQUIRED_PKG_CONFIG_VERSION=${REQUIRED_PKG_CONFIG_VERSION:-0.14.0}
18 REQUIRED_GTK_DOC_VERSION=${REQUIRED_GTK_DOC_VERSION:-1.0}
19 REQUIRED_DOC_COMMON_VERSION=${REQUIRED_DOC_COMMON_VERSION:-2.3.0}
20 REQUIRED_GNOME_DOC_UTILS_VERSION=${REQUIRED_GNOME_DOC_UTILS_VERSION:-0.4.2}
22 # a list of required m4 macros. Package can set an initial value
23 REQUIRED_M4MACROS=${REQUIRED_M4MACROS:-}
24 FORBIDDEN_M4MACROS=${FORBIDDEN_M4MACROS:-}
26 # Not all echo versions allow -n, so we check what is possible. This test is
27 # based on the one in autoconf.
40 # some terminal codes ...
41 if tty < /dev/null 1>/dev/null 2>&1; then
42 boldface="`tput bold 2>/dev/null`"
43 normal="`tput sgr0 2>/dev/null`"
49 echo $ECHO_N "$boldface" $ECHO_C
51 echo $ECHO_N "$normal" $ECHO_C
58 # compare_versions MIN_VERSION ACTUAL_VERSION
59 # returns true if ACTUAL_VERSION >= MIN_VERSION
64 IFS="${IFS= }"; ch_save_IFS="$IFS"; IFS="."
65 set $ch_actual_version
66 for ch_min in $ch_min_version; do
67 ch_cur=`echo $1 | sed 's/[^0-9].*$//'`; shift # remove letter suffixes
68 if [ -z "$ch_min" ]; then break; fi
69 if [ -z "$ch_cur" ]; then ch_status=1; break; fi
70 if [ $ch_cur -gt $ch_min ]; then break; fi
71 if [ $ch_cur -lt $ch_min ]; then ch_status=1; break; fi
78 # version_check PACKAGE VARIABLE CHECKPROGS MIN_VERSION SOURCE
79 # checks to see if the package is available
88 vc_checkprog=`eval echo "\\$$vc_variable"`
89 if [ -n "$vc_checkprog" ]; then
90 printbold "using $vc_checkprog for $vc_package"
94 if test "x$vc_package" = "xautomake" -a "x$vc_min_version" = "x1.4"; then
99 printbold "checking for $vc_package $vc_comparator $vc_min_version..."
100 for vc_checkprog in $vc_checkprogs; do
101 echo $ECHO_N " testing $vc_checkprog... " $ECHO_C
102 if $vc_checkprog --version < /dev/null > /dev/null 2>&1; then
103 vc_actual_version=`$vc_checkprog --version | head -n 1 | \
104 sed 's/^.*[ ]\([0-9.]*[a-z]*\).*$/\1/'`
105 if compare_versions $vc_min_version $vc_actual_version; then
106 echo "found $vc_actual_version"
108 eval "$vc_variable=$vc_checkprog; \
109 ${vc_variable}_VERSION=$vc_actual_version"
113 echo "too old (found version $vc_actual_version)"
119 if [ "$vc_status" != 0 ]; then
120 printerr "***Error***: You must have $vc_package $vc_comparator $vc_min_version installed"
121 printerr " to build $PKG_NAME. Download the appropriate package for"
122 printerr " from your distribution or get the source tarball at"
123 printerr " $vc_source"
131 # require_m4macro filename.m4
132 # adds filename.m4 to the list of required macros
134 case "$REQUIRED_M4MACROS" in
135 $1\ * | *\ $1\ * | *\ $1) ;;
136 *) REQUIRED_M4MACROS="$REQUIRED_M4MACROS $1" ;;
141 case "$FORBIDDEN_M4MACROS" in
142 $1\ * | *\ $1\ * | *\ $1) ;;
143 *) FORBIDDEN_M4MACROS="$FORBIDDEN_M4MACROS $1" ;;
148 # add_to_cm_macrodirs dirname
149 # Adds the dir to $cm_macrodirs, if it's not there yet.
150 add_to_cm_macrodirs() {
151 case $cm_macrodirs in
152 "$1 "* | *" $1 "* | *" $1") ;;
153 *) cm_macrodirs="$cm_macrodirs $1";;
158 # print_m4macros_error
159 # Prints an error message saying that autoconf macros were misused
160 print_m4macros_error() {
161 printerr "***Error***: some autoconf macros required to build $PKG_NAME"
162 printerr " were not found in your aclocal path, or some forbidden"
163 printerr " macros were found. Perhaps you need to adjust your"
164 printerr " ACLOCAL_FLAGS?"
170 # Checks that all the requested macro files are in the aclocal macro path
171 # Uses REQUIRED_M4MACROS and ACLOCAL variables.
173 # construct list of macro directories
174 cm_macrodirs=`$ACLOCAL --print-ac-dir`
175 # aclocal also searches a version specific dir, eg. /usr/share/aclocal-1.9
176 # but it contains only Automake's own macros, so we can ignore it.
178 # Read the dirlist file, supported by Automake >= 1.7.
179 if compare_versions 1.7 $AUTOMAKE_VERSION && [ -s $cm_macrodirs/dirlist ]; then
180 cm_dirlist=`sed 's/[ ]*#.*//;/^$/d' $cm_macrodirs/dirlist`
181 if [ -n "$cm_dirlist" ] ; then
182 for cm_dir in $cm_dirlist; do
183 if [ -d $cm_dir ]; then
184 add_to_cm_macrodirs $cm_dir
190 # Parse $ACLOCAL_FLAGS
192 while [ $# -gt 0 ]; do
193 if [ "$1" = "-I" ]; then
194 add_to_cm_macrodirs "$2"
201 if [ -n "$REQUIRED_M4MACROS" ]; then
202 printbold "Checking for required M4 macros..."
203 # check that each macro file is in one of the macro dirs
204 for cm_macro in $REQUIRED_M4MACROS; do
206 for cm_dir in $cm_macrodirs; do
207 if [ -f "$cm_dir/$cm_macro" ]; then
211 # The macro dir in Cygwin environments may contain a file
212 # called dirlist containing other directories to look in.
213 if [ -f "$cm_dir/dirlist" ]; then
214 for cm_otherdir in `cat $cm_dir/dirlist`; do
215 if [ -f "$cm_otherdir/$cm_macro" ]; then
222 if $cm_macrofound; then
225 printerr " $cm_macro not found"
230 if [ "$cm_status" != 0 ]; then
234 if [ -n "$FORBIDDEN_M4MACROS" ]; then
235 printbold "Checking for forbidden M4 macros..."
236 # check that each macro file is in one of the macro dirs
237 for cm_macro in $FORBIDDEN_M4MACROS; do
239 for cm_dir in $cm_macrodirs; do
240 if [ -f "$cm_dir/$cm_macro" ]; then
245 if $cm_macrofound; then
246 printerr " $cm_macro found (should be cleared from macros dir)"
251 if [ "$cm_status" != 0 ]; then
257 # try to catch the case where the macros2/ directory hasn't been cleared out.
258 forbid_m4macro gnome-cxx-check.m4
262 want_glib_gettext=false
264 want_pkg_config=false
266 want_gnome_doc_utils=false
267 want_maintainer_mode=false
269 configure_files="`find $srcdir -name '{arch}' -prune -o -name '_darcs' -prune -o -name '.??*' -prune -o -name configure.ac -print -o -name configure.in -print`"
270 for configure_ac in $configure_files; do
271 dirname=`dirname $configure_ac`
272 if [ -f $dirname/NO-AUTO-GEN ]; then
273 echo skipping $dirname -- flagged as no auto-gen
276 if grep "^A[CM]_PROG_LIBTOOL" $configure_ac >/dev/null ||
277 grep "^LT_INIT" $configure_ac >/dev/null; then
280 if grep "^AM_GNU_GETTEXT" $configure_ac >/dev/null; then
283 if grep "^AM_GLIB_GNU_GETTEXT" $configure_ac >/dev/null; then
284 want_glib_gettext=true
286 if grep "^AC_PROG_INTLTOOL" $configure_ac >/dev/null ||
287 grep "^IT_PROG_INTLTOOL" $configure_ac >/dev/null; then
290 if grep "^PKG_CHECK_MODULES" $configure_ac >/dev/null; then
293 if grep "^GTK_DOC_CHECK" $configure_ac >/dev/null; then
296 if grep "^GNOME_DOC_INIT" $configure_ac >/dev/null; then
297 want_gnome_doc_utils=true
300 # check that AM_MAINTAINER_MODE is used
301 if grep "^AM_MAINTAINER_MODE" $configure_ac >/dev/null; then
302 want_maintainer_mode=true
305 if grep "^YELP_HELP_INIT" $configure_ac >/dev/null; then
306 require_m4macro yelp.m4
309 # check to make sure gnome-common macros can be found ...
310 if grep "^GNOME_COMMON_INIT" $configure_ac >/dev/null ||
311 grep "^GNOME_DEBUG_CHECK" $configure_ac >/dev/null ||
312 grep "^GNOME_MAINTAINER_MODE_DEFINES" $configure_ac >/dev/null; then
313 require_m4macro gnome-common.m4
315 if grep "^GNOME_COMPILE_WARNINGS" $configure_ac >/dev/null ||
316 grep "^GNOME_CXX_WARNINGS" $configure_ac >/dev/null; then
317 require_m4macro gnome-compiler-flags.m4
321 #tell Mandrake autoconf wrapper we want autoconf 2.5x, not 2.13
323 export WANT_AUTOCONF_2_5
324 version_check autoconf AUTOCONF 'autoconf2.50 autoconf autoconf-2.53' $REQUIRED_AUTOCONF_VERSION \
325 "http://ftp.gnu.org/pub/gnu/autoconf/autoconf-$REQUIRED_AUTOCONF_VERSION.tar.gz"
326 AUTOHEADER=`echo $AUTOCONF | sed s/autoconf/autoheader/`
328 case $REQUIRED_AUTOMAKE_VERSION in
329 1.4*) automake_progs="automake-1.4" ;;
330 1.5*) automake_progs="automake-1.12 automake-1.11 automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6 automake-1.5" ;;
331 1.6*) automake_progs="automake-1.12 automake-1.11 automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6" ;;
332 1.7*) automake_progs="automake-1.12 automake-1.11 automake-1.10 automake-1.9 automake-1.8 automake-1.7" ;;
333 1.8*) automake_progs="automake-1.12 automake-1.11 automake-1.10 automake-1.9 automake-1.8" ;;
334 1.9*) automake_progs="automake-1.12 automake-1.11 automake-1.10 automake-1.9" ;;
335 1.10*) automake_progs="automake-1.12 automake-1.11 automake-1.10" ;;
336 1.11*) automake_progs="automake-1.12 automake-1.11" ;;
337 1.12*) automake_progs="automake-1.12" ;;
339 version_check automake AUTOMAKE "$automake_progs" $REQUIRED_AUTOMAKE_VERSION \
340 "http://ftp.gnu.org/pub/gnu/automake/automake-$REQUIRED_AUTOMAKE_VERSION.tar.gz"
341 ACLOCAL=`echo $AUTOMAKE | sed s/automake/aclocal/`
343 if $want_libtool; then
344 version_check libtool LIBTOOLIZE libtoolize $REQUIRED_LIBTOOL_VERSION \
345 "http://ftp.gnu.org/pub/gnu/libtool/libtool-$REQUIRED_LIBTOOL_VERSION.tar.gz"
346 require_m4macro libtool.m4
349 if $want_gettext; then
350 version_check gettext GETTEXTIZE gettextize $REQUIRED_GETTEXT_VERSION \
351 "http://ftp.gnu.org/pub/gnu/gettext/gettext-$REQUIRED_GETTEXT_VERSION.tar.gz"
352 require_m4macro gettext.m4
355 if $want_glib_gettext; then
356 version_check glib-gettext GLIB_GETTEXTIZE glib-gettextize $REQUIRED_GLIB_GETTEXT_VERSION \
357 "ftp://ftp.gtk.org/pub/gtk/v2.2/glib-$REQUIRED_GLIB_GETTEXT_VERSION.tar.gz"
358 require_m4macro glib-gettext.m4
361 if $want_intltool; then
362 version_check intltool INTLTOOLIZE intltoolize $REQUIRED_INTLTOOL_VERSION \
363 "http://ftp.gnome.org/pub/GNOME/sources/intltool/"
364 require_m4macro intltool.m4
367 if $want_pkg_config; then
368 version_check pkg-config PKG_CONFIG pkg-config $REQUIRED_PKG_CONFIG_VERSION \
369 "'http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-$REQUIRED_PKG_CONFIG_VERSION.tar.gz"
370 require_m4macro pkg.m4
373 if $want_gtk_doc; then
374 version_check gtk-doc GTKDOCIZE gtkdocize $REQUIRED_GTK_DOC_VERSION \
375 "http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/"
376 require_m4macro gtk-doc.m4
379 if $want_gnome_doc_utils; then
380 version_check gnome-doc-utils GNOME_DOC_PREPARE gnome-doc-prepare $REQUIRED_GNOME_DOC_UTILS_VERSION \
381 "http://ftp.gnome.org/pub/GNOME/sources/gnome-doc-utils/"
384 if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
385 version_check gnome-common DOC_COMMON gnome-doc-common \
386 $REQUIRED_DOC_COMMON_VERSION " "
391 if [ "$#" = 0 -a "x$NOCONFIGURE" = "x" ]; then
392 printerr "**Warning**: I am going to run \`configure' with no arguments."
393 printerr "If you wish to pass any to it, please specify them on the"
394 printerr \`$0\'" command line."
399 for configure_ac in $configure_files; do
400 dirname=`dirname $configure_ac`
401 basename=`basename $configure_ac`
402 if [ -f $dirname/NO-AUTO-GEN ]; then
403 echo skipping $dirname -- flagged as no auto-gen
404 elif [ ! -w $dirname ]; then
405 echo skipping $dirname -- directory is read only
407 printbold "Processing $configure_ac"
410 # Note that the order these tools are called should match what
411 # autoconf's "autoupdate" package does. See bug 138584 for
414 # programs that might install new macros get run before aclocal
415 if grep "^A[CM]_PROG_LIBTOOL" $basename >/dev/null ||
416 grep "^LT_INIT" $basename >/dev/null; then
417 printbold "Running $LIBTOOLIZE..."
418 $LIBTOOLIZE --force --copy || exit 1
421 if grep "^AM_GLIB_GNU_GETTEXT" $basename >/dev/null; then
422 printbold "Running $GLIB_GETTEXTIZE... Ignore non-fatal messages."
423 echo "no" | $GLIB_GETTEXTIZE --force --copy || exit 1
424 elif grep "^AM_GNU_GETTEXT" $basename >/dev/null; then
425 if grep "^AM_GNU_GETTEXT_VERSION" $basename > /dev/null; then
426 printbold "Running autopoint..."
427 autopoint --force || exit 1
429 printbold "Running $GETTEXTIZE... Ignore non-fatal messages."
430 echo "no" | $GETTEXTIZE --force --copy || exit 1
434 if grep "^AC_PROG_INTLTOOL" $basename >/dev/null ||
435 grep "^IT_PROG_INTLTOOL" $basename >/dev/null; then
436 printbold "Running $INTLTOOLIZE..."
437 $INTLTOOLIZE --force --copy --automake || exit 1
439 if grep "^GTK_DOC_CHECK" $basename >/dev/null; then
440 printbold "Running $GTKDOCIZE..."
441 $GTKDOCIZE --copy || exit 1
444 if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
445 printbold "Running gnome-doc-common..."
446 gnome-doc-common --copy || exit 1
448 if grep "^GNOME_DOC_INIT" $basename >/dev/null; then
449 printbold "Running $GNOME_DOC_PREPARE..."
450 $GNOME_DOC_PREPARE --force --copy || exit 1
453 # Now run aclocal to pull in any additional macros needed
455 # if the AC_CONFIG_MACRO_DIR() macro is used, pass that
456 # directory to aclocal.
457 m4dir=`cat "$basename" | grep '^AC_CONFIG_MACRO_DIR' | sed -n -e 's/AC_CONFIG_MACRO_DIR(\([^()]*\))/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q`
458 if [ -n "$m4dir" ]; then
461 printbold "Running $ACLOCAL..."
462 $ACLOCAL $m4dir $ACLOCAL_FLAGS || exit 1
464 if grep "GNOME_AUTOGEN_OBSOLETE" aclocal.m4 >/dev/null; then
465 printerr "*** obsolete gnome macros were used in $configure_ac"
468 # Now that all the macros are sorted, run autoconf and autoheader ...
469 printbold "Running $AUTOCONF..."
471 if grep "^A[CM]_CONFIG_HEADER" $basename >/dev/null; then
472 printbold "Running $AUTOHEADER..."
473 $AUTOHEADER || exit 1
474 # this prevents automake from thinking config.h.in is out of
475 # date, since autoheader doesn't touch the file if it doesn't
477 test -f config.h.in && touch config.h.in
480 # Finally, run automake to create the makefiles ...
481 printbold "Running $AUTOMAKE..."
482 if [ -f COPYING ]; then
483 cp -pf COPYING COPYING.autogen_bak
485 if [ -f INSTALL ]; then
486 cp -pf INSTALL INSTALL.autogen_bak
488 if [ $REQUIRED_AUTOMAKE_VERSION != 1.4 ]; then
489 $AUTOMAKE --gnu --add-missing --force --copy -Wno-portability || exit 1
491 $AUTOMAKE --gnu --add-missing --copy || exit 1
493 if [ -f COPYING.autogen_bak ]; then
494 cmp COPYING COPYING.autogen_bak > /dev/null || cp -pf COPYING.autogen_bak COPYING
495 rm -f COPYING.autogen_bak
497 if [ -f INSTALL.autogen_bak ]; then
498 cmp INSTALL INSTALL.autogen_bak > /dev/null || cp -pf INSTALL.autogen_bak INSTALL
499 rm -f INSTALL.autogen_bak
508 if $want_maintainer_mode; then
509 conf_flags="--enable-maintainer-mode"
512 if test x$NOCONFIGURE = x; then
513 printbold Running $srcdir/configure $conf_flags "$@" ...
514 $srcdir/configure $conf_flags "$@" \
515 && echo Now type \`make\' to compile $PKG_NAME || exit 1
517 echo Skipping configure process.