Compiling PCRE on non-Unix systems ---------------------------------- This document contains the following sections: General Generic instructions for the PCRE C library The C++ wrapper functions Building for virtual Pascal Stack size in Windows environments Linking programs in Windows environments Comments about Win32 builds Building PCRE on Windows with CMake Use of relative paths with CMake on Windows Testing with RunTest.bat Building under Windows with BCC5.5 Building PCRE on OpenVMS Building PCRE on Stratus OpenVOS GENERAL I (Philip Hazel) have no experience of Windows or VMS sytems and how their libraries work. The items in the PCRE distribution and Makefile that relate to anything other than Unix-like systems are untested by me. There are some other comments and files (including some documentation in CHM format) in the Contrib directory on the FTP site: ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/Contrib If you want to compile PCRE for a non-Unix system (especially for a system that does not support "configure" and "make" files), note that the basic PCRE library consists entirely of code written in Standard C, and so should compile successfully on any system that has a Standard C compiler and library. The C++ wrapper functions are a separate issue (see below). The PCRE distribution includes a "configure" file for use by the Configure/Make build system, as found in many Unix-like environments. There is also support support for CMake, which some users prefer, especially in Windows environments. There are some instructions for CMake under Windows in the section entitled "Building PCRE with CMake" below. CMake can also be used to build PCRE in Unix-like systems. GENERIC INSTRUCTIONS FOR THE PCRE C LIBRARY The following are generic comments about building the PCRE C library "by hand". (1) Copy or rename the file config.h.generic as config.h, and edit the macro settings that it contains to whatever is appropriate for your environment. In particular, if you want to force a specific value for newline, you can define the NEWLINE macro. When you compile any of the PCRE modules, you must specify -DHAVE_CONFIG_H to your compiler so that config.h is included in the sources. An alternative approach is not to edit config.h, but to use -D on the compiler command line to make any changes that you need to the configuration options. In this case -DHAVE_CONFIG_H must not be set. NOTE: There have been occasions when the way in which certain parameters in config.h are used has changed between releases. (In the configure/make world, this is handled automatically.) When upgrading to a new release, you are strongly advised to review config.h.generic before re-using what you had previously. (2) Copy or rename the file pcre.h.generic as pcre.h. (3) EITHER: Copy or rename file pcre_chartables.c.dist as pcre_chartables.c. OR: Compile dftables.c as a stand-alone program (using -DHAVE_CONFIG_H if you have set up config.h), and then run it with the single argument "pcre_chartables.c". This generates a set of standard character tables and writes them to that file. The tables are generated using the default C locale for your system. If you want to use a locale that is specified by LC_xxx environment variables, add the -L option to the dftables command. You must use this method if you are building on a system that uses EBCDIC code. The tables in pcre_chartables.c are defaults. The caller of PCRE can specify alternative tables at run time. (4) Ensure that you have the following header files: pcre_internal.h ucp.h (5) Also ensure that you have the following file, which is #included as source when building a debugging version of PCRE, and is also used by pcretest. pcre_printint.src (6) Compile the following source files, setting -DHAVE_CONFIG_H as a compiler option if you have set up config.h with your configuration, or else use other -D settings to change the configuration as required. pcre_chartables.c pcre_compile.c pcre_config.c pcre_dfa_exec.c pcre_exec.c pcre_fullinfo.c pcre_get.c pcre_globals.c pcre_info.c pcre_maketables.c pcre_newline.c pcre_ord2utf8.c pcre_refcount.c pcre_study.c pcre_tables.c pcre_try_flipped.c pcre_ucd.c pcre_valid_utf8.c pcre_version.c pcre_xclass.c Make sure that you include -I. in the compiler command (or equivalent for an unusual compiler) so that all included PCRE header files are first sought in the current directory. Otherwise you run the risk of picking up a previously-installed file from somewhere else. (7) Now link all the compiled code into an object library in whichever form your system keeps such libraries. This is the basic PCRE C library. If your system has static and shared libraries, you may have to do this once for each type. (8) Similarly, if you want to build the POSIX wrapper functions, ensure that you have the pcreposix.h file and then compile pcreposix.c (remembering -DHAVE_CONFIG_H if necessary). Link the result (on its own) as the pcreposix library. (9) Compile the test program pcretest.c (again, don't forget -DHAVE_CONFIG_H). This needs the functions in the PCRE library when linking. It also needs the pcreposix wrapper functions unless you compile it with -DNOPOSIX. The pcretest.c program also needs the pcre_printint.src source file, which it #includes. (10) Run pcretest on the testinput files in the testdata directory, and check that the output matches the corresponding testoutput files. Note that the supplied files are in Unix format, with just LF characters as line terminators. You may need to edit them to change this if your system uses a different convention. If you are using Windows, you probably should use the wintestinput3 file instead of testinput3 (and the corresponding output file). This is a locale test; wintestinput3 sets the locale to "french" rather than "fr_FR", and there some minor output differences. (11) If you want to use the pcregrep command, compile and link pcregrep.c; it uses only the basic PCRE library (it does not need the pcreposix library). THE C++ WRAPPER FUNCTIONS The PCRE distribution also contains some C++ wrapper functions and tests, contributed by Google Inc. On a system that can use "configure" and "make", the functions are automatically built into a library called pcrecpp. It should be straightforward to compile the .cc files manually on other systems. The files called xxx_unittest.cc are test programs for each of the corresponding xxx.cc files. BUILDING FOR VIRTUAL PASCAL A script for building PCRE using Borland's C++ compiler for use with VPASCAL was contributed by Alexander Tokarev. Stefan Weber updated the script and added additional files. The following files in the distribution are for building PCRE for use with VP/Borland: makevp_c.txt, makevp_l.txt, makevp.bat, pcregexp.pas. STACK SIZE IN WINDOWS ENVIRONMENTS The default processor stack size of 1Mb in some Windows environments is too small for matching patterns that need much recursion. In particular, test 2 may fail because of this. Normally, running out of stack causes a crash, but there have been cases where the test program has just died silently. See your linker documentation for how to increase stack size if you experience problems. The Linux default of 8Mb is a reasonable choice for the stack, though even that can be too small for some pattern/subject combinations. PCRE has a compile configuration option to disable the use of stack for recursion so that heap is used instead. However, pattern matching is significantly slower when this is done. There is more about stack usage in the "pcrestack" documentation. LINKING PROGRAMS IN WINDOWS ENVIRONMENTS If you want to statically link a program against a PCRE library in the form of a non-dll .a file, you must define PCRE_STATIC before including pcre.h or pcrecpp.h, otherwise the pcre_malloc() and pcre_free() exported functions will be declared __declspec(dllimport), with unwanted results. CALLING CONVENTIONS IN WINDOWS ENVIRONMENTS It is possible to compile programs to use different calling conventions using MSVC. Search the web for "calling conventions" for more information. To make it easier to change the calling convention for the exported functions in the PCRE library, the macro PCRE_CALL_CONVENTION is present in all the external definitions. It can be set externally when compiling (e.g. in CFLAGS). If it is not set, it defaults to empty; the default calling convention is then used (which is what is wanted most of the time). COMMENTS ABOUT WIN32 BUILDS (see also "BUILDING PCRE WITH CMAKE" below) There are two ways of building PCRE using the "configure, make, make install" paradigm on Windows systems: using MinGW or using Cygwin. These are not at all the same thing; they are completely different from each other. There is also support for building using CMake, which some users find a more straightforward way of building PCRE under Windows. However, the tests are not run automatically when CMake is used. The MinGW home page (http://www.mingw.org/) says this: MinGW: A collection of freely available and freely distributable Windows specific header files and import libraries combined with GNU toolsets that allow one to produce native Windows programs that do not rely on any 3rd-party C runtime DLLs. The Cygwin home page (http://www.cygwin.com/) says this: Cygwin is a Linux-like environment for Windows. It consists of two parts: . A DLL (cygwin1.dll) which acts as a Linux API emulation layer providing substantial Linux API functionality . A collection of tools which provide Linux look and feel. The Cygwin DLL currently works with all recent, commercially released x86 32 bit and 64 bit versions of Windows, with the exception of Windows CE. On both MinGW and Cygwin, PCRE should build correctly using: ./configure && make && make install This should create two libraries called libpcre and libpcreposix, and, if you have enabled building the C++ wrapper, a third one called libpcrecpp. These are independent libraries: when you like with libpcreposix or libpcrecpp you must also link with libpcre, which contains the basic functions. (Some earlier releases of PCRE included the basic libpcre functions in libpcreposix. This no longer happens.) A user submitted a special-purpose patch that makes it easy to create "pcre.dll" under mingw32 using the "msys" environment. It provides "pcre.dll" as a special target. If you use this target, no other files are built, and in particular, the pcretest and pcregrep programs are not built. An example of how this might be used is: ./configure --enable-utf --disable-cpp CFLAGS="-03 -s"; make pcre.dll Using Cygwin's compiler generates libraries and executables that depend on cygwin1.dll. If a library that is generated this way is distributed, cygwin1.dll has to be distributed as well. Since cygwin1.dll is under the GPL licence, this forces not only PCRE to be under the GPL, but also the entire application. A distributor who wants to keep their own code proprietary must purchase an appropriate Cygwin licence. MinGW has no such restrictions. The MinGW compiler generates a library or executable that can run standalone on Windows without any third party dll or licensing issues. But there is more complication: If a Cygwin user uses the -mno-cygwin Cygwin gcc flag, what that really does is to tell Cygwin's gcc to use the MinGW gcc. Cygwin's gcc is only acting as a front end to MinGW's gcc (if you install Cygwin's gcc, you get both Cygwin's gcc and MinGW's gcc). So, a user can: . Build native binaries by using MinGW or by getting Cygwin and using -mno-cygwin. . Build binaries that depend on cygwin1.dll by using Cygwin with the normal compiler flags. The test files that are supplied with PCRE are in Unix format, with LF characters as line terminators. It may be necessary to change the line terminators in order to get some of the tests to work. BUILDING PCRE ON WINDOWS WITH CMAKE CMake is an alternative configuration facility that can be used instead of the traditional Unix "configure". CMake creates project files (make files, solution files, etc.) tailored to numerous development environments, including Visual Studio, Borland, Msys, MinGW, NMake, and Unix. The following instructions were contributed by a PCRE user. 1. Install the latest CMake version available from http://www.cmake.org/, and ensure that cmake\bin is on your path. 2. Unzip (retaining folder structure) the PCRE source tree into a source directory such as C:\pcre. 3. Create a new, empty build directory, for example C:\pcre\build\ 4. Run cmake-gui from the Shell envirornment of your build tool, for example, Msys for Msys/MinGW or Visual Studio Command Prompt for VC/VC++. 5. Enter C:\pcre\pcre-xx and C:\pcre\build for the source and build directories, respectively. 6. Hit the "Configure" button. 7. Select the particular IDE / build tool that you are using (Visual Studio, MSYS makefiles, MinGW makefiles, etc.) 8. The GUI will then list several configuration options. This is where you can enable UTF-8 support or other PCRE optional features. 9. Hit "Configure" again. The adjacent "Generate" button should now be active. 10. Hit "Generate". 11. The build directory should now contain a usable build system, be it a solution file for Visual Studio, makefiles for MinGW, etc. Exit from cmake-gui and use the generated build system with your compiler or IDE. USE OF RELATIVE PATHS WITH CMAKE ON WINDOWS A PCRE user comments as follows: I thought that others may want to know the current state of CMAKE_USE_RELATIVE_PATHS support on Windows. Here it is: -- AdditionalIncludeDirectories is only partially modified (only the first path - see below) -- Only some of the contained file paths are modified - shown below for pcre.vcproj -- It properly modifies I am sure CMake people can fix that if they want to. Until then one will need to replace existing absolute paths in project files with relative paths manually (e.g. from VS) - relative to project file location. I did just that before being told to try CMAKE_USE_RELATIVE_PATHS. Not a big deal. AdditionalIncludeDirectories="E:\builds\pcre\build;E:\builds\pcre\pcre-7.5;" AdditionalIncludeDirectories=".;E:\builds\pcre\pcre-7.5;" RelativePath="pcre.h"> RelativePath="pcre_chartables.c"> RelativePath="pcre_chartables.c.rule"> TESTING WITH RUNTEST.BAT 1. Copy RunTest.bat into the directory where pcretest.exe has been created. 2. Edit RunTest.bat and insert a line that indentifies the relative location of the pcre source, e.g.: set srcdir=..\pcre-7.4-RC3 3. Run RunTest.bat from a command shell environment. Test outputs will automatically be compared to expected results, and discrepancies will identified in the console output. 4. To test pcrecpp, run pcrecpp_unittest.exe, pcre_stringpiece_unittest.exe and pcre_scanner_unittest.exe. BUILDING UNDER WINDOWS WITH BCC5.5 Michael Roy sent these comments about building PCRE under Windows with BCC5.5: Some of the core BCC libraries have a version of PCRE from 1998 built in, which can lead to pcre_exec() giving an erroneous PCRE_ERROR_NULL from a version mismatch. I'm including an easy workaround below, if you'd like to include it in the non-unix instructions: When linking a project with BCC5.5, pcre.lib must be included before any of the libraries cw32.lib, cw32i.lib, cw32mt.lib, and cw32mti.lib on the command line. BUILDING UNDER WINDOWS CE WITH VISUAL STUDIO 200x Vincent Richomme sent a zip archive of files to help with this process. They can be found in the file "pcre-vsbuild.zip" in the Contrib directory of the FTP site. BUILDING PCRE ON OPENVMS Dan Mooney sent the following comments about building PCRE on OpenVMS. They relate to an older version of PCRE that used fewer source files, so the exact commands will need changing. See the current list of source files above. "It was quite easy to compile and link the library. I don't have a formal make file but the attached file [reproduced below] contains the OpenVMS DCL commands I used to build the library. I had to add #define POSIX_MALLOC_THRESHOLD 10 to pcre.h since it was not defined anywhere. The library was built on: O/S: HP OpenVMS v7.3-1 Compiler: Compaq C v6.5-001-48BCD Linker: vA13-01 The test results did not match 100% due to the issues you mention in your documentation regarding isprint(), iscntrl(), isgraph() and ispunct(). I modified some of the character tables temporarily and was able to get the results to match. Tests using the fr locale did not match since I don't have that locale loaded. The study size was always reported to be 3 less than the value in the standard test output files." ========================= $! This DCL procedure builds PCRE on OpenVMS $! $! I followed the instructions in the non-unix-use file in the distribution. $! $ COMPILE == "CC/LIST/NOMEMBER_ALIGNMENT/PREFIX_LIBRARY_ENTRIES=ALL_ENTRIES $ COMPILE DFTABLES.C $ LINK/EXE=DFTABLES.EXE DFTABLES.OBJ $ RUN DFTABLES.EXE/OUTPUT=CHARTABLES.C $ COMPILE MAKETABLES.C $ COMPILE GET.C $ COMPILE STUDY.C $! I had to set POSIX_MALLOC_THRESHOLD to 10 in PCRE.H since the symbol $! did not seem to be defined anywhere. $! I edited pcre.h and added #DEFINE SUPPORT_UTF8 to enable UTF8 support. $ COMPILE PCRE.C $ LIB/CREATE PCRE MAKETABLES.OBJ, GET.OBJ, STUDY.OBJ, PCRE.OBJ $! I had to set POSIX_MALLOC_THRESHOLD to 10 in PCRE.H since the symbol $! did not seem to be defined anywhere. $ COMPILE PCREPOSIX.C $ LIB/CREATE PCREPOSIX PCREPOSIX.OBJ $ COMPILE PCRETEST.C $ LINK/EXE=PCRETEST.EXE PCRETEST.OBJ, PCRE/LIB, PCREPOSIX/LIB $! C programs that want access to command line arguments must be $! defined as a symbol $ PCRETEST :== "$ SYS$ROADSUSERS:[DMOONEY.REGEXP]PCRETEST.EXE" $! Arguments must be enclosed in quotes. $ PCRETEST "-C" $! Test results: $! $! The test results did not match 100%. The functions isprint(), iscntrl(), $! isgraph() and ispunct() on OpenVMS must not produce the same results $! as the system that built the test output files provided with the $! distribution. $! $! The study size did not match and was always 3 less on OpenVMS. $! $! Locale could not be set to fr $! ========================= BUILDING PCRE ON STRATUS OPENVOS These notes on the port of PCRE to VOS (lightly edited) were supplied by Ashutosh Warikoo, whose email address has the local part awarikoo and the domain nse.co.in. The port was for version 7.9 in August 2009. 1. Building PCRE I built pcre on OpenVOS Release 17.0.1at using GNU Tools 3.4a without any problems. I used the following packages to build PCRE: ftp://ftp.stratus.com/pub/vos/posix/ga/posix.save.evf.gz Please read and follow the instructions that come with these packages. To start the build of pcre, from the root of the package type: ./build.sh 2. Installing PCRE Once you have successfully built PCRE, login to the SysAdmin group, switch to the root user, and type [ !create_dir (master_disk)>usr --if needed ] [ !create_dir (master_disk)>usr>local --if needed ] !gmake install This installs PCRE and its man pages into /usr/local. You can add (master_disk)>usr>local>bin to your command search paths, or if you are in BASH, add /usr/local/bin to the PATH environment variable. 4. Restrictions This port requires readline library optionally. However during the build I faced some yet unexplored errors while linking with readline. As it was an optional component I chose to disable it. 5. Known Problems I ran a the test suite, but you will have to be your own judge of whether this command, and this port, suits your purposes. If you find any problems that appear to be related to the port itself, please let me know. Please see the build.log file in the root of the package also. ========================= Last Updated: 26 May 2010 ****