From 1fa645ee3ac967910659aa6257cdef622f7341f7 Mon Sep 17 00:00:00 2001 From: Anas Nashif Date: Mon, 5 Nov 2012 09:15:27 -0800 Subject: [PATCH] Imported Upstream version 1.4.14 --- .gitignore | 21 + COMMIT_NOTES | 19 + COPYING | 339 + INCOMPATIBILITIES | 14 + INSTALL | 99 + Makefile.am | 30 + Makefile.in | 789 + aclocal.m4 | 1172 ++ autogen.sh | 4 + build-aux/compile | 310 + build-aux/config.guess | 1530 ++ build-aux/config.sub | 1773 +++ build-aux/depcomp | 688 + build-aux/install-sh | 527 + build-aux/ltmain.sh | 9661 ++++++++++++ build-aux/missing | 331 + config.h.in | 80 + configure | 14541 +++++++++++++++++++ configure.ac | 130 + extensions/.gitignore | 9 + extensions/GNUmakefile.in | 225 + extensions/dscp_helper.c | 79 + extensions/libip6t_HL.c | 127 + extensions/libip6t_HL.man | 17 + extensions/libip6t_LOG.c | 184 + extensions/libip6t_LOG.man | 31 + extensions/libip6t_REJECT.c | 140 + extensions/libip6t_REJECT.man | 33 + extensions/libip6t_ah.c | 140 + extensions/libip6t_ah.man | 10 + extensions/libip6t_dst.c | 194 + extensions/libip6t_dst.man | 7 + extensions/libip6t_eui64.c | 15 + extensions/libip6t_eui64.man | 10 + extensions/libip6t_frag.c | 186 + extensions/libip6t_frag.man | 20 + extensions/libip6t_hbh.c | 184 + extensions/libip6t_hbh.man | 7 + extensions/libip6t_hl.c | 118 + extensions/libip6t_hl.man | 10 + extensions/libip6t_icmp6.c | 239 + extensions/libip6t_icmp6.man | 14 + extensions/libip6t_ipv6header.c | 245 + extensions/libip6t_ipv6header.man | 37 + extensions/libip6t_mh.c | 228 + extensions/libip6t_mh.man | 12 + extensions/libip6t_rt.c | 258 + extensions/libip6t_rt.man | 19 + extensions/libipt_CLUSTERIP.c | 195 + extensions/libipt_CLUSTERIP.man | 24 + extensions/libipt_DNAT.c | 262 + extensions/libipt_DNAT.man | 39 + extensions/libipt_ECN.c | 145 + extensions/libipt_ECN.man | 7 + extensions/libipt_LOG.c | 186 + extensions/libipt_LOG.man | 31 + extensions/libipt_MASQUERADE.c | 154 + extensions/libipt_MASQUERADE.man | 30 + extensions/libipt_MIRROR.c | 15 + extensions/libipt_MIRROR.man | 12 + extensions/libipt_NETMAP.c | 106 + extensions/libipt_NETMAP.man | 9 + extensions/libipt_REDIRECT.c | 155 + extensions/libipt_REDIRECT.man | 25 + extensions/libipt_REJECT.c | 160 + extensions/libipt_REJECT.man | 32 + extensions/libipt_SAME.c | 181 + extensions/libipt_SAME.man | 17 + extensions/libipt_SNAT.c | 262 + extensions/libipt_SNAT.man | 37 + extensions/libipt_TTL.c | 126 + extensions/libipt_TTL.man | 19 + extensions/libipt_ULOG.c | 128 + extensions/libipt_ULOG.man | 27 + extensions/libipt_ah.c | 105 + extensions/libipt_ah.man | 3 + extensions/libipt_icmp.c | 269 + extensions/libipt_icmp.man | 9 + extensions/libipt_realm.c | 127 + extensions/libipt_realm.man | 7 + extensions/libipt_ttl.c | 135 + extensions/libipt_ttl.man | 10 + extensions/libipt_unclean.c | 15 + extensions/libipt_unclean.man | 2 + extensions/libxt_AUDIT.c | 101 + extensions/libxt_AUDIT.man | 14 + extensions/libxt_CHECKSUM.c | 77 + extensions/libxt_CHECKSUM.man | 8 + extensions/libxt_CLASSIFY.c | 88 + extensions/libxt_CLASSIFY.man | 5 + extensions/libxt_CONNMARK.c | 386 + extensions/libxt_CONNMARK.man | 53 + extensions/libxt_CONNSECMARK.c | 112 + extensions/libxt_CONNSECMARK.man | 18 + extensions/libxt_CT.c | 282 + extensions/libxt_CT.man | 30 + extensions/libxt_DSCP.c | 112 + extensions/libxt_DSCP.man | 9 + extensions/libxt_IDLETIMER.c | 89 + extensions/libxt_IDLETIMER.man | 20 + extensions/libxt_LED.c | 137 + extensions/libxt_LED.man | 30 + extensions/libxt_MARK.c | 296 + extensions/libxt_MARK.man | 27 + extensions/libxt_NFLOG.c | 106 + extensions/libxt_NFLOG.man | 29 + extensions/libxt_NFQUEUE.c | 208 + extensions/libxt_NFQUEUE.man | 25 + extensions/libxt_NOTRACK.c | 15 + extensions/libxt_NOTRACK.man | 5 + extensions/libxt_RATEEST.c | 183 + extensions/libxt_RATEEST.man | 12 + extensions/libxt_SECMARK.c | 88 + extensions/libxt_SECMARK.man | 10 + extensions/libxt_SET.c | 400 + extensions/libxt_SET.man | 25 + extensions/libxt_TCPMSS.c | 126 + extensions/libxt_TCPMSS.man | 41 + extensions/libxt_TCPOPTSTRIP.c | 167 + extensions/libxt_TCPOPTSTRIP.man | 7 + extensions/libxt_TEE.c | 127 + extensions/libxt_TEE.man | 12 + extensions/libxt_TOS.c | 220 + extensions/libxt_TOS.man | 36 + extensions/libxt_TPROXY.c | 195 + extensions/libxt_TPROXY.man | 21 + extensions/libxt_TRACE.c | 21 + extensions/libxt_TRACE.man | 13 + extensions/libxt_addrtype.c | 300 + extensions/libxt_addrtype.man | 69 + extensions/libxt_cluster.c | 146 + extensions/libxt_cluster.man | 62 + extensions/libxt_comment.c | 67 + extensions/libxt_comment.man | 6 + extensions/libxt_connbytes.c | 175 + extensions/libxt_connbytes.man | 36 + extensions/libxt_connlimit.c | 252 + extensions/libxt_connlimit.man | 42 + extensions/libxt_connmark.c | 157 + extensions/libxt_connmark.man | 6 + extensions/libxt_conntrack.c | 1110 ++ extensions/libxt_conntrack.man | 86 + extensions/libxt_cpu.c | 63 + extensions/libxt_cpu.man | 15 + extensions/libxt_dccp.c | 296 + extensions/libxt_dccp.man | 12 + extensions/libxt_devgroup.c | 180 + extensions/libxt_dscp.c | 111 + extensions/libxt_dscp.man | 10 + extensions/libxt_ecn.c | 138 + extensions/libxt_ecn.man | 11 + extensions/libxt_esp.c | 99 + extensions/libxt_esp.man | 3 + extensions/libxt_hashlimit.c | 570 + extensions/libxt_hashlimit.man | 65 + extensions/libxt_helper.c | 63 + extensions/libxt_helper.man | 11 + extensions/libxt_iprange.c | 347 + extensions/libxt_iprange.man | 7 + extensions/libxt_ipvs.c | 285 + extensions/libxt_ipvs.man | 24 + extensions/libxt_length.c | 75 + extensions/libxt_length.man | 5 + extensions/libxt_limit.c | 163 + extensions/libxt_limit.man | 18 + extensions/libxt_mac.c | 88 + extensions/libxt_mac.man | 10 + extensions/libxt_mark.c | 137 + extensions/libxt_mark.man | 9 + extensions/libxt_multiport.c | 534 + extensions/libxt_multiport.man | 23 + extensions/libxt_nfacct.c | 89 + extensions/libxt_nfacct.man | 30 + extensions/libxt_osf.c | 114 + extensions/libxt_osf.man | 45 + extensions/libxt_owner.c | 543 + extensions/libxt_owner.man | 19 + extensions/libxt_physdev.c | 149 + extensions/libxt_physdev.man | 42 + extensions/libxt_pkttype.c | 134 + extensions/libxt_pkttype.man | 3 + extensions/libxt_policy.c | 407 + extensions/libxt_policy.man | 53 + extensions/libxt_quota.c | 70 + extensions/libxt_quota.man | 7 + extensions/libxt_rateest.c | 445 + extensions/libxt_rateest.man | 96 + extensions/libxt_recent.c | 218 + extensions/libxt_recent.man | 109 + extensions/libxt_rpfilter.c | 96 + extensions/libxt_rpfilter.man | 38 + extensions/libxt_sctp.c | 505 + extensions/libxt_sctp.man | 28 + extensions/libxt_set.c | 242 + extensions/libxt_set.h | 153 + extensions/libxt_set.man | 22 + extensions/libxt_socket.c | 82 + extensions/libxt_socket.man | 5 + extensions/libxt_standard.c | 24 + extensions/libxt_state.c | 137 + extensions/libxt_state.man | 24 + extensions/libxt_statistic.c | 149 + extensions/libxt_statistic.man | 29 + extensions/libxt_string.c | 338 + extensions/libxt_string.man | 18 + extensions/libxt_tcp.c | 384 + extensions/libxt_tcp.man | 44 + extensions/libxt_tcpmss.c | 75 + extensions/libxt_tcpmss.man | 4 + extensions/libxt_time.c | 451 + extensions/libxt_time.man | 86 + extensions/libxt_tos.c | 156 + extensions/libxt_tos.man | 12 + extensions/libxt_u32.c | 283 + extensions/libxt_u32.man | 129 + extensions/libxt_udp.c | 173 + extensions/libxt_udp.man | 14 + extensions/tos_values.c | 41 + include/Makefile.am | 12 + include/Makefile.in | 511 + include/ip6tables.h | 20 + include/iptables.h | 23 + include/iptables/internal.h.in | 13 + include/libipq/libipq.h | 83 + include/libiptc/ipt_kernel_headers.h | 27 + include/libiptc/libip6tc.h | 164 + include/libiptc/libiptc.h | 172 + include/libiptc/libxtc.h | 33 + include/libiptc/xtcshared.h | 20 + include/libipulog/libipulog.h | 39 + include/linux/kernel.h | 29 + include/linux/netfilter.h | 69 + include/linux/netfilter/ipset/ip_set.h | 225 + include/linux/netfilter/nf_conntrack_common.h | 113 + .../linux/netfilter/nf_conntrack_tuple_common.h | 12 + include/linux/netfilter/x_tables.h | 185 + include/linux/netfilter/xt_AUDIT.h | 30 + include/linux/netfilter/xt_CHECKSUM.h | 20 + include/linux/netfilter/xt_CLASSIFY.h | 10 + include/linux/netfilter/xt_CONNMARK.h | 6 + include/linux/netfilter/xt_CONNSECMARK.h | 15 + include/linux/netfilter/xt_CT.h | 31 + include/linux/netfilter/xt_DSCP.h | 26 + include/linux/netfilter/xt_IDLETIMER.h | 45 + include/linux/netfilter/xt_LED.h | 15 + include/linux/netfilter/xt_MARK.h | 6 + include/linux/netfilter/xt_NFLOG.h | 20 + include/linux/netfilter/xt_NFQUEUE.h | 29 + include/linux/netfilter/xt_RATEEST.h | 15 + include/linux/netfilter/xt_SECMARK.h | 22 + include/linux/netfilter/xt_TCPMSS.h | 12 + include/linux/netfilter/xt_TCPOPTSTRIP.h | 15 + include/linux/netfilter/xt_TEE.h | 12 + include/linux/netfilter/xt_TPROXY.h | 23 + include/linux/netfilter/xt_addrtype.h | 44 + include/linux/netfilter/xt_cluster.h | 19 + include/linux/netfilter/xt_comment.h | 10 + include/linux/netfilter/xt_connbytes.h | 26 + include/linux/netfilter/xt_connlimit.h | 34 + include/linux/netfilter/xt_connmark.h | 31 + include/linux/netfilter/xt_conntrack.h | 76 + include/linux/netfilter/xt_cpu.h | 11 + include/linux/netfilter/xt_dccp.h | 25 + include/linux/netfilter/xt_devgroup.h | 21 + include/linux/netfilter/xt_dscp.h | 31 + include/linux/netfilter/xt_ecn.h | 33 + include/linux/netfilter/xt_esp.h | 15 + include/linux/netfilter/xt_hashlimit.h | 68 + include/linux/netfilter/xt_helper.h | 8 + include/linux/netfilter/xt_iprange.h | 19 + include/linux/netfilter/xt_ipvs.h | 29 + include/linux/netfilter/xt_length.h | 11 + include/linux/netfilter/xt_limit.h | 24 + include/linux/netfilter/xt_mac.h | 8 + include/linux/netfilter/xt_mark.h | 15 + include/linux/netfilter/xt_multiport.h | 29 + include/linux/netfilter/xt_nfacct.h | 17 + include/linux/netfilter/xt_osf.h | 135 + include/linux/netfilter/xt_owner.h | 18 + include/linux/netfilter/xt_physdev.h | 23 + include/linux/netfilter/xt_pkttype.h | 8 + include/linux/netfilter/xt_policy.h | 58 + include/linux/netfilter/xt_quota.h | 22 + include/linux/netfilter/xt_rateest.h | 37 + include/linux/netfilter/xt_realm.h | 12 + include/linux/netfilter/xt_recent.h | 35 + include/linux/netfilter/xt_rpfilter.h | 17 + include/linux/netfilter/xt_sctp.h | 92 + include/linux/netfilter/xt_set.h | 65 + include/linux/netfilter/xt_socket.h | 14 + include/linux/netfilter/xt_state.h | 12 + include/linux/netfilter/xt_statistic.h | 36 + include/linux/netfilter/xt_string.h | 34 + include/linux/netfilter/xt_tcpmss.h | 11 + include/linux/netfilter/xt_tcpudp.h | 36 + include/linux/netfilter/xt_time.h | 27 + include/linux/netfilter/xt_u32.h | 42 + include/linux/netfilter_ipv4.h | 75 + include/linux/netfilter_ipv4/ip_tables.h | 227 + include/linux/netfilter_ipv4/ipt_CLUSTERIP.h | 36 + include/linux/netfilter_ipv4/ipt_ECN.h | 33 + include/linux/netfilter_ipv4/ipt_LOG.h | 19 + include/linux/netfilter_ipv4/ipt_REJECT.h | 20 + include/linux/netfilter_ipv4/ipt_SAME.h | 20 + include/linux/netfilter_ipv4/ipt_TTL.h | 23 + include/linux/netfilter_ipv4/ipt_ULOG.h | 49 + include/linux/netfilter_ipv4/ipt_addrtype.h | 27 + include/linux/netfilter_ipv4/ipt_ah.h | 17 + include/linux/netfilter_ipv4/ipt_realm.h | 7 + include/linux/netfilter_ipv4/ipt_ttl.h | 23 + include/linux/netfilter_ipv6.h | 73 + include/linux/netfilter_ipv6/ip6_tables.h | 265 + include/linux/netfilter_ipv6/ip6t_HL.h | 24 + include/linux/netfilter_ipv6/ip6t_LOG.h | 19 + include/linux/netfilter_ipv6/ip6t_REJECT.h | 20 + include/linux/netfilter_ipv6/ip6t_ah.h | 22 + include/linux/netfilter_ipv6/ip6t_frag.h | 25 + include/linux/netfilter_ipv6/ip6t_hl.h | 24 + include/linux/netfilter_ipv6/ip6t_ipv6header.h | 28 + include/linux/netfilter_ipv6/ip6t_mh.h | 16 + include/linux/netfilter_ipv6/ip6t_opts.h | 24 + include/linux/netfilter_ipv6/ip6t_rt.h | 33 + include/linux/types.h | 51 + include/net/netfilter/nf_conntrack_tuple.h | 114 + include/net/netfilter/nf_nat.h | 55 + include/xtables.h.in | 525 + iptables/.gitignore | 14 + iptables/Makefile.am | 55 + iptables/Makefile.in | 905 ++ iptables/ip6tables-multi.h | 8 + iptables/ip6tables-restore.8 | 52 + iptables/ip6tables-restore.c | 465 + iptables/ip6tables-save.8 | 53 + iptables/ip6tables-save.c | 169 + iptables/ip6tables-standalone.c | 79 + iptables/ip6tables.8.in | 446 + iptables/ip6tables.c | 1965 +++ iptables/iptables-apply | 175 + iptables/iptables-apply.8 | 44 + iptables/iptables-multi.h | 8 + iptables/iptables-restore.8 | 50 + iptables/iptables-restore.c | 465 + iptables/iptables-save.8 | 51 + iptables/iptables-save.c | 168 + iptables/iptables-standalone.c | 82 + iptables/iptables-xml.1 | 87 + iptables/iptables-xml.c | 864 ++ iptables/iptables.8.in | 451 + iptables/iptables.c | 1980 +++ iptables/iptables.xslt | 138 + iptables/xshared.c | 238 + iptables/xshared.h | 89 + iptables/xtables-multi.c | 41 + iptables/xtables-multi.h | 6 + iptables/xtables.pc.in | 13 + libipq/.gitignore | 1 + libipq/Makefile.am | 13 + libipq/Makefile.in | 636 + libipq/ipq_create_handle.3 | 82 + libipq/ipq_destroy_handle.3 | 1 + libipq/ipq_errstr.3 | 64 + libipq/ipq_get_msgerr.3 | 1 + libipq/ipq_get_packet.3 | 1 + libipq/ipq_message_type.3 | 134 + libipq/ipq_perror.3 | 1 + libipq/ipq_read.3 | 104 + libipq/ipq_set_mode.3 | 105 + libipq/ipq_set_verdict.3 | 100 + libipq/libipq.3 | 277 + libipq/libipq.c | 379 + libipq/libipq.pc.in | 11 + libiptc/.gitignore | 1 + libiptc/Makefile.am | 15 + libiptc/Makefile.in | 607 + libiptc/libip4tc.c | 485 + libiptc/libip4tc.pc.in | 10 + libiptc/libip6tc.c | 436 + libiptc/libip6tc.pc.in | 10 + libiptc/libiptc.c | 2756 ++++ libiptc/libiptc.pc.in | 10 + libiptc/linux_list.h | 723 + libiptc/linux_stddef.h | 39 + libxtables/Makefile.am | 20 + libxtables/Makefile.in | 578 + libxtables/xtables.c | 1832 +++ libxtables/xtoptions.c | 1172 ++ m4/.gitignore | 2 + m4/ax_check_linker_flags.m4 | 78 + m4/libtool.m4 | 8001 ++++++++++ m4/ltoptions.m4 | 384 + m4/ltsugar.m4 | 123 + m4/ltversion.m4 | 23 + m4/lt~obsolete.m4 | 98 + release.sh | 31 + tests/options-ipv4.rules | 52 + tests/options-most.rules | 211 + utils/.gitignore | 1 + utils/Makefile.am | 10 + utils/Makefile.in | 586 + utils/nfnl_osf.c | 485 + utils/pf.os | 687 + 401 files changed, 89980 insertions(+) create mode 100644 .gitignore create mode 100644 COMMIT_NOTES create mode 100644 COPYING create mode 100644 INCOMPATIBILITIES create mode 100644 INSTALL create mode 100644 Makefile.am create mode 100644 Makefile.in create mode 100644 aclocal.m4 create mode 100755 autogen.sh create mode 100755 build-aux/compile create mode 100755 build-aux/config.guess create mode 100755 build-aux/config.sub create mode 100755 build-aux/depcomp create mode 100755 build-aux/install-sh create mode 100644 build-aux/ltmain.sh create mode 100755 build-aux/missing create mode 100644 config.h.in create mode 100755 configure create mode 100644 configure.ac create mode 100644 extensions/.gitignore create mode 100644 extensions/GNUmakefile.in create mode 100644 extensions/dscp_helper.c create mode 100644 extensions/libip6t_HL.c create mode 100644 extensions/libip6t_HL.man create mode 100644 extensions/libip6t_LOG.c create mode 100644 extensions/libip6t_LOG.man create mode 100644 extensions/libip6t_REJECT.c create mode 100644 extensions/libip6t_REJECT.man create mode 100644 extensions/libip6t_ah.c create mode 100644 extensions/libip6t_ah.man create mode 100644 extensions/libip6t_dst.c create mode 100644 extensions/libip6t_dst.man create mode 100644 extensions/libip6t_eui64.c create mode 100644 extensions/libip6t_eui64.man create mode 100644 extensions/libip6t_frag.c create mode 100644 extensions/libip6t_frag.man create mode 100644 extensions/libip6t_hbh.c create mode 100644 extensions/libip6t_hbh.man create mode 100644 extensions/libip6t_hl.c create mode 100644 extensions/libip6t_hl.man create mode 100644 extensions/libip6t_icmp6.c create mode 100644 extensions/libip6t_icmp6.man create mode 100644 extensions/libip6t_ipv6header.c create mode 100644 extensions/libip6t_ipv6header.man create mode 100644 extensions/libip6t_mh.c create mode 100644 extensions/libip6t_mh.man create mode 100644 extensions/libip6t_rt.c create mode 100644 extensions/libip6t_rt.man create mode 100644 extensions/libipt_CLUSTERIP.c create mode 100644 extensions/libipt_CLUSTERIP.man create mode 100644 extensions/libipt_DNAT.c create mode 100644 extensions/libipt_DNAT.man create mode 100644 extensions/libipt_ECN.c create mode 100644 extensions/libipt_ECN.man create mode 100644 extensions/libipt_LOG.c create mode 100644 extensions/libipt_LOG.man create mode 100644 extensions/libipt_MASQUERADE.c create mode 100644 extensions/libipt_MASQUERADE.man create mode 100644 extensions/libipt_MIRROR.c create mode 100644 extensions/libipt_MIRROR.man create mode 100644 extensions/libipt_NETMAP.c create mode 100644 extensions/libipt_NETMAP.man create mode 100644 extensions/libipt_REDIRECT.c create mode 100644 extensions/libipt_REDIRECT.man create mode 100644 extensions/libipt_REJECT.c create mode 100644 extensions/libipt_REJECT.man create mode 100644 extensions/libipt_SAME.c create mode 100644 extensions/libipt_SAME.man create mode 100644 extensions/libipt_SNAT.c create mode 100644 extensions/libipt_SNAT.man create mode 100644 extensions/libipt_TTL.c create mode 100644 extensions/libipt_TTL.man create mode 100644 extensions/libipt_ULOG.c create mode 100644 extensions/libipt_ULOG.man create mode 100644 extensions/libipt_ah.c create mode 100644 extensions/libipt_ah.man create mode 100644 extensions/libipt_icmp.c create mode 100644 extensions/libipt_icmp.man create mode 100644 extensions/libipt_realm.c create mode 100644 extensions/libipt_realm.man create mode 100644 extensions/libipt_ttl.c create mode 100644 extensions/libipt_ttl.man create mode 100644 extensions/libipt_unclean.c create mode 100644 extensions/libipt_unclean.man create mode 100644 extensions/libxt_AUDIT.c create mode 100644 extensions/libxt_AUDIT.man create mode 100644 extensions/libxt_CHECKSUM.c create mode 100644 extensions/libxt_CHECKSUM.man create mode 100644 extensions/libxt_CLASSIFY.c create mode 100644 extensions/libxt_CLASSIFY.man create mode 100644 extensions/libxt_CONNMARK.c create mode 100644 extensions/libxt_CONNMARK.man create mode 100644 extensions/libxt_CONNSECMARK.c create mode 100644 extensions/libxt_CONNSECMARK.man create mode 100644 extensions/libxt_CT.c create mode 100644 extensions/libxt_CT.man create mode 100644 extensions/libxt_DSCP.c create mode 100644 extensions/libxt_DSCP.man create mode 100644 extensions/libxt_IDLETIMER.c create mode 100644 extensions/libxt_IDLETIMER.man create mode 100644 extensions/libxt_LED.c create mode 100644 extensions/libxt_LED.man create mode 100644 extensions/libxt_MARK.c create mode 100644 extensions/libxt_MARK.man create mode 100644 extensions/libxt_NFLOG.c create mode 100644 extensions/libxt_NFLOG.man create mode 100644 extensions/libxt_NFQUEUE.c create mode 100644 extensions/libxt_NFQUEUE.man create mode 100644 extensions/libxt_NOTRACK.c create mode 100644 extensions/libxt_NOTRACK.man create mode 100644 extensions/libxt_RATEEST.c create mode 100644 extensions/libxt_RATEEST.man create mode 100644 extensions/libxt_SECMARK.c create mode 100644 extensions/libxt_SECMARK.man create mode 100644 extensions/libxt_SET.c create mode 100644 extensions/libxt_SET.man create mode 100644 extensions/libxt_TCPMSS.c create mode 100644 extensions/libxt_TCPMSS.man create mode 100644 extensions/libxt_TCPOPTSTRIP.c create mode 100644 extensions/libxt_TCPOPTSTRIP.man create mode 100644 extensions/libxt_TEE.c create mode 100644 extensions/libxt_TEE.man create mode 100644 extensions/libxt_TOS.c create mode 100644 extensions/libxt_TOS.man create mode 100644 extensions/libxt_TPROXY.c create mode 100644 extensions/libxt_TPROXY.man create mode 100644 extensions/libxt_TRACE.c create mode 100644 extensions/libxt_TRACE.man create mode 100644 extensions/libxt_addrtype.c create mode 100644 extensions/libxt_addrtype.man create mode 100644 extensions/libxt_cluster.c create mode 100644 extensions/libxt_cluster.man create mode 100644 extensions/libxt_comment.c create mode 100644 extensions/libxt_comment.man create mode 100644 extensions/libxt_connbytes.c create mode 100644 extensions/libxt_connbytes.man create mode 100644 extensions/libxt_connlimit.c create mode 100644 extensions/libxt_connlimit.man create mode 100644 extensions/libxt_connmark.c create mode 100644 extensions/libxt_connmark.man create mode 100644 extensions/libxt_conntrack.c create mode 100644 extensions/libxt_conntrack.man create mode 100644 extensions/libxt_cpu.c create mode 100644 extensions/libxt_cpu.man create mode 100644 extensions/libxt_dccp.c create mode 100644 extensions/libxt_dccp.man create mode 100644 extensions/libxt_devgroup.c create mode 100644 extensions/libxt_dscp.c create mode 100644 extensions/libxt_dscp.man create mode 100644 extensions/libxt_ecn.c create mode 100644 extensions/libxt_ecn.man create mode 100644 extensions/libxt_esp.c create mode 100644 extensions/libxt_esp.man create mode 100644 extensions/libxt_hashlimit.c create mode 100644 extensions/libxt_hashlimit.man create mode 100644 extensions/libxt_helper.c create mode 100644 extensions/libxt_helper.man create mode 100644 extensions/libxt_iprange.c create mode 100644 extensions/libxt_iprange.man create mode 100644 extensions/libxt_ipvs.c create mode 100644 extensions/libxt_ipvs.man create mode 100644 extensions/libxt_length.c create mode 100644 extensions/libxt_length.man create mode 100644 extensions/libxt_limit.c create mode 100644 extensions/libxt_limit.man create mode 100644 extensions/libxt_mac.c create mode 100644 extensions/libxt_mac.man create mode 100644 extensions/libxt_mark.c create mode 100644 extensions/libxt_mark.man create mode 100644 extensions/libxt_multiport.c create mode 100644 extensions/libxt_multiport.man create mode 100644 extensions/libxt_nfacct.c create mode 100644 extensions/libxt_nfacct.man create mode 100644 extensions/libxt_osf.c create mode 100644 extensions/libxt_osf.man create mode 100644 extensions/libxt_owner.c create mode 100644 extensions/libxt_owner.man create mode 100644 extensions/libxt_physdev.c create mode 100644 extensions/libxt_physdev.man create mode 100644 extensions/libxt_pkttype.c create mode 100644 extensions/libxt_pkttype.man create mode 100644 extensions/libxt_policy.c create mode 100644 extensions/libxt_policy.man create mode 100644 extensions/libxt_quota.c create mode 100644 extensions/libxt_quota.man create mode 100644 extensions/libxt_rateest.c create mode 100644 extensions/libxt_rateest.man create mode 100644 extensions/libxt_recent.c create mode 100644 extensions/libxt_recent.man create mode 100644 extensions/libxt_rpfilter.c create mode 100644 extensions/libxt_rpfilter.man create mode 100644 extensions/libxt_sctp.c create mode 100644 extensions/libxt_sctp.man create mode 100644 extensions/libxt_set.c create mode 100644 extensions/libxt_set.h create mode 100644 extensions/libxt_set.man create mode 100644 extensions/libxt_socket.c create mode 100644 extensions/libxt_socket.man create mode 100644 extensions/libxt_standard.c create mode 100644 extensions/libxt_state.c create mode 100644 extensions/libxt_state.man create mode 100644 extensions/libxt_statistic.c create mode 100644 extensions/libxt_statistic.man create mode 100644 extensions/libxt_string.c create mode 100644 extensions/libxt_string.man create mode 100644 extensions/libxt_tcp.c create mode 100644 extensions/libxt_tcp.man create mode 100644 extensions/libxt_tcpmss.c create mode 100644 extensions/libxt_tcpmss.man create mode 100644 extensions/libxt_time.c create mode 100644 extensions/libxt_time.man create mode 100644 extensions/libxt_tos.c create mode 100644 extensions/libxt_tos.man create mode 100644 extensions/libxt_u32.c create mode 100644 extensions/libxt_u32.man create mode 100644 extensions/libxt_udp.c create mode 100644 extensions/libxt_udp.man create mode 100644 extensions/tos_values.c create mode 100644 include/Makefile.am create mode 100644 include/Makefile.in create mode 100644 include/ip6tables.h create mode 100644 include/iptables.h create mode 100644 include/iptables/internal.h.in create mode 100644 include/libipq/libipq.h create mode 100644 include/libiptc/ipt_kernel_headers.h create mode 100644 include/libiptc/libip6tc.h create mode 100644 include/libiptc/libiptc.h create mode 100644 include/libiptc/libxtc.h create mode 100644 include/libiptc/xtcshared.h create mode 100644 include/libipulog/libipulog.h create mode 100644 include/linux/kernel.h create mode 100644 include/linux/netfilter.h create mode 100644 include/linux/netfilter/ipset/ip_set.h create mode 100644 include/linux/netfilter/nf_conntrack_common.h create mode 100644 include/linux/netfilter/nf_conntrack_tuple_common.h create mode 100644 include/linux/netfilter/x_tables.h create mode 100644 include/linux/netfilter/xt_AUDIT.h create mode 100644 include/linux/netfilter/xt_CHECKSUM.h create mode 100644 include/linux/netfilter/xt_CLASSIFY.h create mode 100644 include/linux/netfilter/xt_CONNMARK.h create mode 100644 include/linux/netfilter/xt_CONNSECMARK.h create mode 100644 include/linux/netfilter/xt_CT.h create mode 100644 include/linux/netfilter/xt_DSCP.h create mode 100644 include/linux/netfilter/xt_IDLETIMER.h create mode 100644 include/linux/netfilter/xt_LED.h create mode 100644 include/linux/netfilter/xt_MARK.h create mode 100644 include/linux/netfilter/xt_NFLOG.h create mode 100644 include/linux/netfilter/xt_NFQUEUE.h create mode 100644 include/linux/netfilter/xt_RATEEST.h create mode 100644 include/linux/netfilter/xt_SECMARK.h create mode 100644 include/linux/netfilter/xt_TCPMSS.h create mode 100644 include/linux/netfilter/xt_TCPOPTSTRIP.h create mode 100644 include/linux/netfilter/xt_TEE.h create mode 100644 include/linux/netfilter/xt_TPROXY.h create mode 100644 include/linux/netfilter/xt_addrtype.h create mode 100644 include/linux/netfilter/xt_cluster.h create mode 100644 include/linux/netfilter/xt_comment.h create mode 100644 include/linux/netfilter/xt_connbytes.h create mode 100644 include/linux/netfilter/xt_connlimit.h create mode 100644 include/linux/netfilter/xt_connmark.h create mode 100644 include/linux/netfilter/xt_conntrack.h create mode 100644 include/linux/netfilter/xt_cpu.h create mode 100644 include/linux/netfilter/xt_dccp.h create mode 100644 include/linux/netfilter/xt_devgroup.h create mode 100644 include/linux/netfilter/xt_dscp.h create mode 100644 include/linux/netfilter/xt_ecn.h create mode 100644 include/linux/netfilter/xt_esp.h create mode 100644 include/linux/netfilter/xt_hashlimit.h create mode 100644 include/linux/netfilter/xt_helper.h create mode 100644 include/linux/netfilter/xt_iprange.h create mode 100644 include/linux/netfilter/xt_ipvs.h create mode 100644 include/linux/netfilter/xt_length.h create mode 100644 include/linux/netfilter/xt_limit.h create mode 100644 include/linux/netfilter/xt_mac.h create mode 100644 include/linux/netfilter/xt_mark.h create mode 100644 include/linux/netfilter/xt_multiport.h create mode 100644 include/linux/netfilter/xt_nfacct.h create mode 100644 include/linux/netfilter/xt_osf.h create mode 100644 include/linux/netfilter/xt_owner.h create mode 100644 include/linux/netfilter/xt_physdev.h create mode 100644 include/linux/netfilter/xt_pkttype.h create mode 100644 include/linux/netfilter/xt_policy.h create mode 100644 include/linux/netfilter/xt_quota.h create mode 100644 include/linux/netfilter/xt_rateest.h create mode 100644 include/linux/netfilter/xt_realm.h create mode 100644 include/linux/netfilter/xt_recent.h create mode 100644 include/linux/netfilter/xt_rpfilter.h create mode 100644 include/linux/netfilter/xt_sctp.h create mode 100644 include/linux/netfilter/xt_set.h create mode 100644 include/linux/netfilter/xt_socket.h create mode 100644 include/linux/netfilter/xt_state.h create mode 100644 include/linux/netfilter/xt_statistic.h create mode 100644 include/linux/netfilter/xt_string.h create mode 100644 include/linux/netfilter/xt_tcpmss.h create mode 100644 include/linux/netfilter/xt_tcpudp.h create mode 100644 include/linux/netfilter/xt_time.h create mode 100644 include/linux/netfilter/xt_u32.h create mode 100644 include/linux/netfilter_ipv4.h create mode 100644 include/linux/netfilter_ipv4/ip_tables.h create mode 100644 include/linux/netfilter_ipv4/ipt_CLUSTERIP.h create mode 100644 include/linux/netfilter_ipv4/ipt_ECN.h create mode 100644 include/linux/netfilter_ipv4/ipt_LOG.h create mode 100644 include/linux/netfilter_ipv4/ipt_REJECT.h create mode 100644 include/linux/netfilter_ipv4/ipt_SAME.h create mode 100644 include/linux/netfilter_ipv4/ipt_TTL.h create mode 100644 include/linux/netfilter_ipv4/ipt_ULOG.h create mode 100644 include/linux/netfilter_ipv4/ipt_addrtype.h create mode 100644 include/linux/netfilter_ipv4/ipt_ah.h create mode 100644 include/linux/netfilter_ipv4/ipt_realm.h create mode 100644 include/linux/netfilter_ipv4/ipt_ttl.h create mode 100644 include/linux/netfilter_ipv6.h create mode 100644 include/linux/netfilter_ipv6/ip6_tables.h create mode 100644 include/linux/netfilter_ipv6/ip6t_HL.h create mode 100644 include/linux/netfilter_ipv6/ip6t_LOG.h create mode 100644 include/linux/netfilter_ipv6/ip6t_REJECT.h create mode 100644 include/linux/netfilter_ipv6/ip6t_ah.h create mode 100644 include/linux/netfilter_ipv6/ip6t_frag.h create mode 100644 include/linux/netfilter_ipv6/ip6t_hl.h create mode 100644 include/linux/netfilter_ipv6/ip6t_ipv6header.h create mode 100644 include/linux/netfilter_ipv6/ip6t_mh.h create mode 100644 include/linux/netfilter_ipv6/ip6t_opts.h create mode 100644 include/linux/netfilter_ipv6/ip6t_rt.h create mode 100644 include/linux/types.h create mode 100644 include/net/netfilter/nf_conntrack_tuple.h create mode 100644 include/net/netfilter/nf_nat.h create mode 100644 include/xtables.h.in create mode 100644 iptables/.gitignore create mode 100644 iptables/Makefile.am create mode 100644 iptables/Makefile.in create mode 100644 iptables/ip6tables-multi.h create mode 100644 iptables/ip6tables-restore.8 create mode 100644 iptables/ip6tables-restore.c create mode 100644 iptables/ip6tables-save.8 create mode 100644 iptables/ip6tables-save.c create mode 100644 iptables/ip6tables-standalone.c create mode 100644 iptables/ip6tables.8.in create mode 100644 iptables/ip6tables.c create mode 100755 iptables/iptables-apply create mode 100644 iptables/iptables-apply.8 create mode 100644 iptables/iptables-multi.h create mode 100644 iptables/iptables-restore.8 create mode 100644 iptables/iptables-restore.c create mode 100644 iptables/iptables-save.8 create mode 100644 iptables/iptables-save.c create mode 100644 iptables/iptables-standalone.c create mode 100644 iptables/iptables-xml.1 create mode 100644 iptables/iptables-xml.c create mode 100644 iptables/iptables.8.in create mode 100644 iptables/iptables.c create mode 100644 iptables/iptables.xslt create mode 100644 iptables/xshared.c create mode 100644 iptables/xshared.h create mode 100644 iptables/xtables-multi.c create mode 100644 iptables/xtables-multi.h create mode 100644 iptables/xtables.pc.in create mode 100644 libipq/.gitignore create mode 100644 libipq/Makefile.am create mode 100644 libipq/Makefile.in create mode 100644 libipq/ipq_create_handle.3 create mode 100644 libipq/ipq_destroy_handle.3 create mode 100644 libipq/ipq_errstr.3 create mode 100644 libipq/ipq_get_msgerr.3 create mode 100644 libipq/ipq_get_packet.3 create mode 100644 libipq/ipq_message_type.3 create mode 100644 libipq/ipq_perror.3 create mode 100644 libipq/ipq_read.3 create mode 100644 libipq/ipq_set_mode.3 create mode 100644 libipq/ipq_set_verdict.3 create mode 100644 libipq/libipq.3 create mode 100644 libipq/libipq.c create mode 100644 libipq/libipq.pc.in create mode 100644 libiptc/.gitignore create mode 100644 libiptc/Makefile.am create mode 100644 libiptc/Makefile.in create mode 100644 libiptc/libip4tc.c create mode 100644 libiptc/libip4tc.pc.in create mode 100644 libiptc/libip6tc.c create mode 100644 libiptc/libip6tc.pc.in create mode 100644 libiptc/libiptc.c create mode 100644 libiptc/libiptc.pc.in create mode 100644 libiptc/linux_list.h create mode 100644 libiptc/linux_stddef.h create mode 100644 libxtables/Makefile.am create mode 100644 libxtables/Makefile.in create mode 100644 libxtables/xtables.c create mode 100644 libxtables/xtoptions.c create mode 100644 m4/.gitignore create mode 100644 m4/ax_check_linker_flags.m4 create mode 100644 m4/libtool.m4 create mode 100644 m4/ltoptions.m4 create mode 100644 m4/ltsugar.m4 create mode 100644 m4/ltversion.m4 create mode 100644 m4/lt~obsolete.m4 create mode 100644 release.sh create mode 100644 tests/options-ipv4.rules create mode 100644 tests/options-most.rules create mode 100644 utils/.gitignore create mode 100644 utils/Makefile.am create mode 100644 utils/Makefile.in create mode 100644 utils/nfnl_osf.c create mode 100644 utils/pf.os diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..b7c3dfb --- /dev/null +++ b/.gitignore @@ -0,0 +1,21 @@ +*.a +*.la +*.lo +*.so +*.o +.deps/ +.dirstamp +.libs/ +Makefile +Makefile.in + +/include/xtables.h +/include/iptables/internal.h + +/aclocal.m4 +/autom4te.cache/ +/build-aux/ +/config.* +/configure +/libtool +/stamp-h1 diff --git a/COMMIT_NOTES b/COMMIT_NOTES new file mode 100644 index 0000000..592808c --- /dev/null +++ b/COMMIT_NOTES @@ -0,0 +1,19 @@ +A quick list of rules for committing stuff into netfilter git: + +- Always add an appropriate description, in git format + (i.e. first line is a summary) + +- Please try to include references to bugs when the description does not + include total discussion coverage or when the bug report is external to + netfilter-devel, e.g. + "Closes: netfilter bugzilla #123", or + "Reference: http://bugs.{debian,gentoo}.org/..." + +- If you touch any parts of libxtables (xtables.c, include/xtables.h.in), + make sure the so-version is updated _appropriately_ (i.e. read the + libtool manual about Versioning:: first, if need be) in configure.ac. + Adding fields to a struct always entails a vcurrent bump. + + - Check, whether a bump (vcurrent,vage) has already been made since the + last release (no more than one per release), e.g.: + git log v1.4.4.. configure.ac diff --git a/COPYING b/COPYING new file mode 100644 index 0000000..d159169 --- /dev/null +++ b/COPYING @@ -0,0 +1,339 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Lesser General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. diff --git a/INCOMPATIBILITIES b/INCOMPATIBILITIES new file mode 100644 index 0000000..ddb2408 --- /dev/null +++ b/INCOMPATIBILITIES @@ -0,0 +1,14 @@ +INCOMPATIBILITIES: + +- The REJECT target has an '--reject-with admin-prohib' option which used + with kernels that do not support it, will result in a plain DROP instead + of REJECT. Use with caution. + Kernels that do support it: + 2.4 - since 2.4.22-pre9 + 2.6 - all + +- There are some issues related to upgrading from 1.2.x to 1.3.x on a system + with dynamic ruleset changes during runtime. (Please see + https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=334). + After upgrading from 1.2 to 1.3, it suggest go do an iptables-save, then + iptables-restore to ensure your dynamic rule changes continue to work. diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..e17e844 --- /dev/null +++ b/INSTALL @@ -0,0 +1,99 @@ +Installation instructions for iptables +====================================== + +iptables uses the well-known configure(autotools) infrastructure. + + $ ./configure + $ make + # make install + + +Prerequisites +============= + + * no kernel-source required + + * but obviously a compiler, glibc-devel and linux-kernel-headers + (/usr/include/linux) + + +Configuring and compiling +========================= + +./configure [options] + +--prefix= + + The prefix to put all installed files under. It defaults to + /usr/local, so the binaries will go into /usr/local/bin, sbin, + manpages into /usr/local/share/man, etc. + +--with-xtlibdir= + + The path to where Xtables extensions should be installed to. It + defaults to ${libdir}/xtables. + +--enable-devel (or --disable-devel) + + This option causes development files to be installed to + ${includedir}, which is needed for building additional packages, + such as Xtables-addons or other 3rd-party extensions. + + It is enabled by default. + +--enable-static + + Produce additional binaries, iptables-static/ip6tables-static, + which have all shipped extensions compiled in. + +--disable-shared + + Produce binaries that have dynamic loading of extensions disabled. + This implies --enable-static. + (See some details below.) + +--enable-libipq + + This option causes libipq to be installed into ${libdir} and + ${includedir}. + +--with-ksource= + + Xtables does not depend on kernel headers anymore, but you can + optionally specify a search path to include anyway. This is + probably only useful for development. + +If you want to enable debugging, use + + ./configure CFLAGS="-ggdb3 -O0" + +(-O0 is used to turn off instruction reordering, which makes debugging +much easier.) + + +Other notes +=========== + +The make process will automatically build multipurpose binaries. +These have the core (iptables), -save, -restore and -xml code +compiled into one binary, but extensions remain as modules. + + +Static and shared +================= + +Basically there are three configuration modes defined: + + --disable-static --enable-shared (this is the default) + + Build a binary that relies upon dynamic loading of extensions. + + --enable-static --enable-shared + + Build a binary that has the shipped extensions built-in, but + is still capable of loading additional extensions. + + --enable-static --disable-shared + + Shipped extensions are built-in, and dynamic loading is + deactivated. diff --git a/Makefile.am b/Makefile.am new file mode 100644 index 0000000..4eb63eb --- /dev/null +++ b/Makefile.am @@ -0,0 +1,30 @@ +# -*- Makefile -*- + +ACLOCAL_AMFLAGS = -I m4 +AUTOMAKE_OPTIONS = foreign subdir-objects + +SUBDIRS = libiptc libxtables +if ENABLE_DEVEL +SUBDIRS += include +endif +if ENABLE_LIBIPQ +SUBDIRS += libipq +endif +if HAVE_LIBNFNETLINK +SUBDIRS += utils +endif +# Depends on libxtables: +SUBDIRS += extensions +# Depends on extensions/libext.a: +SUBDIRS += iptables + +.PHONY: tarball +tarball: + rm -Rf /tmp/${PACKAGE_TARNAME}-${PACKAGE_VERSION}; + pushd ${top_srcdir} && git archive --prefix=${PACKAGE_TARNAME}-${PACKAGE_VERSION}/ HEAD | tar -C /tmp -x && popd; + pushd /tmp/${PACKAGE_TARNAME}-${PACKAGE_VERSION} && ./autogen.sh && popd; + tar -C /tmp -cjf ${PACKAGE_TARNAME}-${PACKAGE_VERSION}.tar.bz2 --owner=root --group=root ${PACKAGE_TARNAME}-${PACKAGE_VERSION}/; + rm -Rf /tmp/${PACKAGE_TARNAME}-${PACKAGE_VERSION}; + +config.status: extensions/GNUmakefile.in \ + include/xtables.h.in include/iptables/internal.h.in diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 0000000..43f338a --- /dev/null +++ b/Makefile.in @@ -0,0 +1,789 @@ +# Makefile.in generated by automake 1.11.3 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# -*- Makefile -*- +VPATH = @srcdir@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +@ENABLE_DEVEL_TRUE@am__append_1 = include +@ENABLE_LIBIPQ_TRUE@am__append_2 = libipq +@HAVE_LIBNFNETLINK_TRUE@am__append_3 = utils +subdir = . +DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(top_srcdir)/configure \ + $(top_srcdir)/extensions/GNUmakefile.in \ + $(top_srcdir)/include/iptables/internal.h.in COPYING INSTALL \ + build-aux/compile build-aux/config.guess build-aux/config.sub \ + build-aux/depcomp build-aux/install-sh build-aux/ltmain.sh \ + build-aux/missing +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_linker_flags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = extensions/GNUmakefile \ + include/iptables/internal.h +CONFIG_CLEAN_VPATH_FILES = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir dist dist-all distcheck +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = libiptc libxtables include libipq utils extensions \ + iptables +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' +distcleancheck_listfiles = find . -type f -print +pkgdatadir = @pkgdatadir@ +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +blacklist_modules = @blacklist_modules@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +kbuilddir = @kbuilddir@ +kinclude_CPPFLAGS = @kinclude_CPPFLAGS@ +ksourcedir = @ksourcedir@ +libdir = @libdir@ +libexecdir = @libexecdir@ +libiptc_LDFLAGS2 = @libiptc_LDFLAGS2@ +libnfnetlink_CFLAGS = @libnfnetlink_CFLAGS@ +libnfnetlink_LIBS = @libnfnetlink_LIBS@ +libxtables_vage = @libxtables_vage@ +libxtables_vcurrent = @libxtables_vcurrent@ +libxtables_vmajor = @libxtables_vmajor@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +noundef_LDFLAGS = @noundef_LDFLAGS@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +pkgconfigdir = @pkgconfigdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +regular_CFLAGS = @regular_CFLAGS@ +regular_CPPFLAGS = @regular_CPPFLAGS@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xtlibdir = @xtlibdir@ +ACLOCAL_AMFLAGS = -I m4 +AUTOMAKE_OPTIONS = foreign subdir-objects +# Depends on libxtables: +# Depends on extensions/libext.a: +SUBDIRS = libiptc libxtables $(am__append_1) $(am__append_2) \ + $(am__append_3) extensions iptables +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +.SUFFIXES: +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +config.h: stamp-h1 + @if test ! -f $@; then rm -f stamp-h1; else :; fi + @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 +extensions/GNUmakefile: $(top_builddir)/config.status $(top_srcdir)/extensions/GNUmakefile.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +include/iptables/internal.h: $(top_builddir)/config.status $(top_srcdir)/include/iptables/internal.h.in + cd $(top_builddir) && $(SHELL) ./config.status $@ + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__remove_distdir) + +dist-lzma: distdir + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile config.h +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-hdr \ + distclean-libtool distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ + ctags-recursive install-am install-strip tags-recursive + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am am--refresh check check-am clean clean-generic \ + clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ + dist-gzip dist-lzip dist-lzma dist-shar dist-tarZ dist-xz \ + dist-zip distcheck distclean distclean-generic distclean-hdr \ + distclean-libtool distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags tags-recursive uninstall uninstall-am + + +.PHONY: tarball +tarball: + rm -Rf /tmp/${PACKAGE_TARNAME}-${PACKAGE_VERSION}; + pushd ${top_srcdir} && git archive --prefix=${PACKAGE_TARNAME}-${PACKAGE_VERSION}/ HEAD | tar -C /tmp -x && popd; + pushd /tmp/${PACKAGE_TARNAME}-${PACKAGE_VERSION} && ./autogen.sh && popd; + tar -C /tmp -cjf ${PACKAGE_TARNAME}-${PACKAGE_VERSION}.tar.bz2 --owner=root --group=root ${PACKAGE_TARNAME}-${PACKAGE_VERSION}/; + rm -Rf /tmp/${PACKAGE_TARNAME}-${PACKAGE_VERSION}; + +config.status: extensions/GNUmakefile.in \ + include/xtables.h.in include/iptables/internal.h.in + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100644 index 0000000..282ff63 --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,1172 @@ +# generated automatically by aclocal 1.11.3 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, +# Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, +[m4_warning([this file was generated for autoconf 2.69. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically `autoreconf'.])]) + +# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +# serial 1 (pkg-config-0.24) +# +# Copyright © 2004 Scott James Remnant . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# PKG_PROG_PKG_CONFIG([MIN-VERSION]) +# ---------------------------------- +AC_DEFUN([PKG_PROG_PKG_CONFIG], +[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) +m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) +m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$]) +AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility]) +AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path]) +AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path]) + +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=m4_default([$1], [0.9.0]) + AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + PKG_CONFIG="" + fi +fi[]dnl +])# PKG_PROG_PKG_CONFIG + +# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +# +# Check to see whether a particular set of modules exists. Similar +# to PKG_CHECK_MODULES(), but does not set variables or print errors. +# +# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +# only at the first occurence in configure.ac, so if the first place +# it's called might be skipped (such as if it is within an "if", you +# have to call PKG_CHECK_EXISTS manually +# -------------------------------------------------------------- +AC_DEFUN([PKG_CHECK_EXISTS], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +if test -n "$PKG_CONFIG" && \ + AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then + m4_default([$2], [:]) +m4_ifvaln([$3], [else + $3])dnl +fi]) + +# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) +# --------------------------------------------- +m4_define([_PKG_CONFIG], +[if test -n "$$1"; then + pkg_cv_[]$1="$$1" + elif test -n "$PKG_CONFIG"; then + PKG_CHECK_EXISTS([$3], + [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes ], + [pkg_failed=yes]) + else + pkg_failed=untried +fi[]dnl +])# _PKG_CONFIG + +# _PKG_SHORT_ERRORS_SUPPORTED +# ----------------------------- +AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi[]dnl +])# _PKG_SHORT_ERRORS_SUPPORTED + + +# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +# [ACTION-IF-NOT-FOUND]) +# +# +# Note that if there is a possibility the first call to +# PKG_CHECK_MODULES might not happen, you should be sure to include an +# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac +# +# +# -------------------------------------------------------------- +AC_DEFUN([PKG_CHECK_MODULES], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl +AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl + +pkg_failed=no +AC_MSG_CHECKING([for $1]) + +_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) +_PKG_CONFIG([$1][_LIBS], [libs], [$2]) + +m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS +and $1[]_LIBS to avoid the need to call pkg-config. +See the pkg-config man page for more details.]) + +if test $pkg_failed = yes; then + AC_MSG_RESULT([no]) + _PKG_SHORT_ERRORS_SUPPORTED + if test $_pkg_short_errors_supported = yes; then + $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1` + else + $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD + + m4_default([$4], [AC_MSG_ERROR( +[Package requirements ($2) were not met: + +$$1_PKG_ERRORS + +Consider adjusting the PKG_CONFIG_PATH environment variable if you +installed software in a non-standard prefix. + +_PKG_TEXT])[]dnl + ]) +elif test $pkg_failed = untried; then + AC_MSG_RESULT([no]) + m4_default([$4], [AC_MSG_FAILURE( +[The pkg-config script could not be found or is too old. Make sure it +is in your PATH or set the PKG_CONFIG environment variable to the full +path to pkg-config. + +_PKG_TEXT + +To get pkg-config, see .])[]dnl + ]) +else + $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS + $1[]_LIBS=$pkg_cv_[]$1[]_LIBS + AC_MSG_RESULT([yes]) + $3 +fi[]dnl +])# PKG_CHECK_MODULES + +# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software +# Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.11' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.11.3], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.11.3])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 9 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009, +# 2010, 2011 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 12 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], UPC, [depcc="$UPC" am_compiler_list=], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +#serial 5 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 16 + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.62])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES(OBJC)], + [define([AC_PROG_OBJC], + defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl +]) +_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl +dnl The `parallel-tests' driver may need to know about EXEEXT, so add the +dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro +dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl +]) + +dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation, +# Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST(install_sh)]) + +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 6 + +# AM_PROG_CC_C_O +# -------------- +# Like AC_PROG_CC_C_O, but changed for automake. +AC_DEFUN([AM_PROG_CC_C_O], +[AC_REQUIRE([AC_PROG_CC_C_O])dnl +AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([compile])dnl +# FIXME: we rely on the cache variable name because +# there is no other way. +set dummy $CC +am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` +eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o +if test "$am_t" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +dnl Make sure AC_PROG_CC is never called again, or it will override our +dnl setting of CC. +m4_define([AC_PROG_CC], + [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 6 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) + +# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation, +# Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# AM_PROG_MKDIR_P +# --------------- +# Check for `mkdir -p'. +AC_DEFUN([AM_PROG_MKDIR_P], +[AC_PREREQ([2.60])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +dnl while keeping a definition of mkdir_p for backward compatibility. +dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +dnl Makefile.ins that do not define MKDIR_P, so we do our own +dnl adjustment using top_builddir (which is defined more often than +dnl MKDIR_P). +AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +case $mkdir_p in + [[\\/$]]* | ?:[[\\/]]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software +# Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# -------------------- +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ------------------------ +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; +esac + +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 1 + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# -------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004, 2005, 2012 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + +m4_include([m4/ax_check_linker_flags.m4]) +m4_include([m4/libtool.m4]) +m4_include([m4/ltoptions.m4]) +m4_include([m4/ltsugar.m4]) +m4_include([m4/ltversion.m4]) +m4_include([m4/lt~obsolete.m4]) diff --git a/autogen.sh b/autogen.sh new file mode 100755 index 0000000..a0c4395 --- /dev/null +++ b/autogen.sh @@ -0,0 +1,4 @@ +#!/bin/sh -e + +autoreconf -fi; +rm -Rf autom4te*.cache; diff --git a/build-aux/compile b/build-aux/compile new file mode 100755 index 0000000..b1f4749 --- /dev/null +++ b/build-aux/compile @@ -0,0 +1,310 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2012-01-04.17; # UTC + +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009, 2010, 2012 Free +# Software Foundation, Inc. +# Written by Tom Tromey . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l*) + lib=${1#-l} + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + set x "$@" "$dir/$lib.dll.lib" + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + set x "$@" "$dir/$lib.lib" + break + fi + done + IFS=$save_IFS + + test "$found" != yes && set x "$@" "$lib.lib" + shift + ;; + -L*) + func_file_conv "${1#-L}" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/build-aux/config.guess b/build-aux/config.guess new file mode 100755 index 0000000..d622a44 --- /dev/null +++ b/build-aux/config.guess @@ -0,0 +1,1530 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, +# 2011, 2012 Free Software Foundation, Inc. + +timestamp='2012-02-10' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Originally written by Per Bothner. Please send patches (context +# diff format) to and include a ChangeLog +# entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux${UNAME_RELEASE} + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[4567]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + UNAME_PROCESSOR=`/usr/bin/uname -p` + case ${UNAME_PROCESSOR} in + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:MSYS*:*) + echo ${UNAME_MACHINE}-pc-msys + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + aarch64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-gnu + else + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabihf + fi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo ${UNAME_MACHINE}-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + hexagon:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + LIBC=gnu + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'` + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-gnu + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + tile*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + i386) + eval $set_cc_for_build + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + UNAME_PROCESSOR="x86_64" + fi + fi ;; + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NEO-?:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk${UNAME_RELEASE} + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; + x86_64:VMkernel:*:*) + echo ${UNAME_MACHINE}-unknown-esx + exit ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/build-aux/config.sub b/build-aux/config.sub new file mode 100755 index 0000000..c894da4 --- /dev/null +++ b/build-aux/config.sub @@ -0,0 +1,1773 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, +# 2011, 2012 Free Software Foundation, Inc. + +timestamp='2012-02-10' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Please send patches to . Submit a context +# diff and a properly formatted GNU ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ + linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ + knetbsd*-gnu* | netbsd*-gnu* | \ + kopensolaris*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + android-linux) + os=-linux-android + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray | -microblaze) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | aarch64 | aarch64_be \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ + | be32 | be64 \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | epiphany \ + | fido | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | hexagon \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | le32 | le64 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nds32 | nds32le | nds32be \ + | nios | nios2 \ + | ns16k | ns32k \ + | open8 \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle \ + | pyramid \ + | rl78 | rx \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu \ + | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \ + | ubicom32 \ + | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ + | we32k \ + | x86 | xc16x | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + c54x) + basic_machine=tic54x-unknown + ;; + c55x) + basic_machine=tic55x-unknown + ;; + c6x) + basic_machine=tic6x-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip) + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + strongarm | thumb | xscale) + basic_machine=arm-unknown + ;; + xgate) + basic_machine=$basic_machine-unknown + os=-none + ;; + xscaleeb) + basic_machine=armeb-unknown + ;; + + xscaleel) + basic_machine=armel-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | aarch64-* | aarch64_be-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | be32-* | be64-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | hexagon-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | le32-* | le64-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nds32-* | nds32le-* | nds32be-* \ + | nios-* | nios2-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | open8-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ + | pyramid-* \ + | rl78-* | romp-* | rs6000-* | rx-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ + | tahoe-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tile*-* \ + | tron-* \ + | ubicom32-* \ + | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ + | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c54x-*) + basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c55x-*) + basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c6x-*) + basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16 | cr16-*) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + microblaze) + basic_machine=microblaze-xilinx + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + msys) + basic_machine=i386-pc + os=-msys + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + nacl) + basic_machine=le32-unknown + os=-nacl + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + neo-tandem) + basic_machine=neo-tandem + ;; + nse-tandem) + basic_machine=nse-tandem + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc | ppcbe) basic_machine=powerpc-unknown + ;; + ppc-* | ppcbe-*) + basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + strongarm-* | thumb-*) + basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tile*) + basic_machine=$basic_machine-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + xscale-* | xscalee[bl]-*) + basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -auroraux) + os=-auroraux + ;; + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ + | -sym* | -kopensolaris* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-android* \ + | -linux-newlib* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -nacl*) + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + tic54x-*) + os=-coff + ;; + tic55x-*) + os=-coff + ;; + tic6x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/build-aux/depcomp b/build-aux/depcomp new file mode 100755 index 0000000..bd0ac08 --- /dev/null +++ b/build-aux/depcomp @@ -0,0 +1,688 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2011-12-04.11; # UTC + +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010, +# 2011 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputting dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvisualcpp +fi + +if test "$depmode" = msvc7msys; then + # This is just like msvc7 but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvc7 +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. hp depmode also adds that space, but also prefixes the VPATH +## to the object. Take care to not repeat it in the output. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> "$depfile" + echo >> "$depfile" + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts `$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u + "$@" -Wc,-M + else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u + "$@" -M + fi + stat=$? + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using \ : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" + # Add `dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mechanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +msvc7) + if test "$libtool" = yes; then + showIncludes=-Wc,-showIncludes + else + showIncludes=-showIncludes + fi + "$@" $showIncludes > "$tmpdepfile" + stat=$? + grep -v '^Note: including file: ' "$tmpdepfile" + if test "$stat" = 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The first sed program below extracts the file names and escapes + # backslashes for cygpath. The second sed program outputs the file + # name when reading, but also accumulates all include files in the + # hold buffer in order to output them again at the end. This only + # works with sed implementations that can handle large buffers. + sed < "$tmpdepfile" -n ' +/^Note: including file: *\(.*\)/ { + s//\1/ + s/\\/\\\\/g + p +}' | $cygpath_u | sort -u | sed -n ' +s/ /\\ /g +s/\(.*\)/ \1 \\/p +s/.\(.*\) \\/\1:/ +H +$ { + s/.*/ / + G + p +}' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvc7msys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no eat=no + for arg + do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + if test $eat = yes; then + eat=no + continue + fi + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix=`echo "$object" | sed 's/^.*\././'` + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + # makedepend may prepend the VPATH from the source file name to the object. + # No need to regex-escape $object, excess matching of '.' is harmless. + sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + IFS=" " + for arg + do + case "$arg" in + -o) + shift + ;; + $object) + shift + ;; + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/build-aux/install-sh b/build-aux/install-sh new file mode 100755 index 0000000..a9244eb --- /dev/null +++ b/build-aux/install-sh @@ -0,0 +1,527 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2011-01-19.21; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. + +nl=' +' +IFS=" "" $nl" + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit=${DOITPROG-} +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi + +# Put in absolute file names if you don't have them in your path; +# or use environment vars. + +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} + +posix_glob='?' +initialize_posix_glob=' + test "$posix_glob" != "?" || { + if (set -f) 2>/dev/null; then + posix_glob= + else + posix_glob=: + fi + } +' + +posix_mkdir= + +# Desired mode of installed file. +mode=0755 + +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog +rmcmd="$rmprog -f" +stripcmd= + +src= +dst= +dir_arg= +dst_arg= + +copy_on_change=false +no_target_directory= + +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: + --help display this help and exit. + --version display version info and exit. + + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" + +while test $# -ne 0; do + case $1 in + -c) ;; + + -C) copy_on_change=true;; + + -d) dir_arg=true;; + + -g) chgrpcmd="$chgrpprog $2" + shift;; + + --help) echo "$usage"; exit $?;; + + -m) mode=$2 + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; + + -o) chowncmd="$chownprog $2" + shift;; + + -s) stripcmd=$stripprog;; + + -t) dst_arg=$2 + # Protect names problematic for `test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; + + -T) no_target_directory=true;; + + --version) echo "$0 $scriptversion"; exit $?;; + + --) shift + break;; + + -*) echo "$0: invalid option: $1" >&2 + exit 1;; + + *) break;; + esac + shift +done + +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + # Protect names problematic for `test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + done +fi + +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi + +for src +do + # Protect names problematic for `test' and other utilities. + case $src in + -* | [=\(\)!]) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + dst=$dst_arg + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + # Prefer dirname, but fall back on a substitute if dirname fails. + dstdir=` + (dirname "$dst") 2>/dev/null || + expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$dst" : 'X\(//\)[^/]' \| \ + X"$dst" : 'X\(//\)$' \| \ + X"$dst" : 'X\(/\)' \| . 2>/dev/null || + echo X"$dst" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q' + ` + + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writeable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; + esac + + eval "$initialize_posix_glob" + + oIFS=$IFS + IFS=/ + $posix_glob set -f + set fnord $dstdir + shift + $posix_glob set +f + IFS=$oIFS + + prefixes= + + for d + do + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + + eval "$initialize_posix_glob" && + $posix_glob set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + $posix_glob set +f && + + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/build-aux/ltmain.sh b/build-aux/ltmain.sh new file mode 100644 index 0000000..c7d06c3 --- /dev/null +++ b/build-aux/ltmain.sh @@ -0,0 +1,9661 @@ + +# libtool (GNU libtool) 2.4.2 +# Written by Gordon Matzigkeit , 1996 + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, +# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, +# or obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +# Usage: $progname [OPTION]... [MODE-ARG]... +# +# Provide generalized library-building support services. +# +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --no-quiet, --no-silent +# print informational messages (default) +# --no-warn don't display warning messages +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print more informational messages than default +# --no-verbose don't print the extra informational messages +# --version print version information +# -h, --help, --help-all print short, long, or detailed help message +# +# MODE must be one of the following: +# +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory +# +# MODE-ARGS vary depending on the MODE. When passed as first option, +# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. +# Try `$progname --help --mode=MODE' for a more detailed description of MODE. +# +# When reporting a bug, please describe a test case to reproduce it and +# include the following information: +# +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1 +# automake: $automake_version +# autoconf: $autoconf_version +# +# Report bugs to . +# GNU libtool home page: . +# General help using GNU software: . + +PROGRAM=libtool +PACKAGE=libtool +VERSION="2.4.2 Debian-2.4.2-1" +TIMESTAMP="" +package_revision=1.3337 + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} + +# NLS nuisances: We save the old values to restore during execute mode. +lt_user_locale= +lt_safe_locale= +for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES +do + eval "if test \"\${$lt_var+set}\" = set; then + save_$lt_var=\$$lt_var + $lt_var=C + export $lt_var + lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" + fi" +done +LC_ALL=C +LANGUAGE=C +export LANGUAGE LC_ALL + +$lt_unset CDPATH + + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + + + +: ${CP="cp -f"} +test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} +: ${Xsed="$SED -e 1s/^X//"} + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +exit_status=$EXIT_SUCCESS + +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" + +dirname="s,/[^/]*$,," +basename="s,^.*/,," + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} # func_dirname may be replaced by extended shell implementation + + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "${1}" | $SED "$basename"` +} # func_basename may be replaced by extended shell implementation + + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` +} # func_dirname_and_basename may be replaced by extended shell implementation + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname may be replaced by extended shell implementation + + +# These SED scripts presuppose an absolute path with a trailing slash. +pathcar='s,^/\([^/]*\).*$,\1,' +pathcdr='s,^/[^/]*,,' +removedotparts=':dotsl + s@/\./@/@g + t dotsl + s,/\.$,/,' +collapseslashes='s@/\{1,\}@/@g' +finalslash='s,/*$,/,' + +# func_normal_abspath PATH +# Remove doubled-up and trailing slashes, "." path components, +# and cancel out any ".." path components in PATH after making +# it an absolute path. +# value returned in "$func_normal_abspath_result" +func_normal_abspath () +{ + # Start from root dir and reassemble the path. + func_normal_abspath_result= + func_normal_abspath_tpath=$1 + func_normal_abspath_altnamespace= + case $func_normal_abspath_tpath in + "") + # Empty path, that just means $cwd. + func_stripname '' '/' "`pwd`" + func_normal_abspath_result=$func_stripname_result + return + ;; + # The next three entries are used to spot a run of precisely + # two leading slashes without using negated character classes; + # we take advantage of case's first-match behaviour. + ///*) + # Unusual form of absolute path, do nothing. + ;; + //*) + # Not necessarily an ordinary path; POSIX reserves leading '//' + # and for example Cygwin uses it to access remote file shares + # over CIFS/SMB, so we conserve a leading double slash if found. + func_normal_abspath_altnamespace=/ + ;; + /*) + # Absolute path, do nothing. + ;; + *) + # Relative path, prepend $cwd. + func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath + ;; + esac + # Cancel out all the simple stuff to save iterations. We also want + # the path to end with a slash for ease of parsing, so make sure + # there is one (and only one) here. + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` + while :; do + # Processed it all yet? + if test "$func_normal_abspath_tpath" = / ; then + # If we ascended to the root using ".." the result may be empty now. + if test -z "$func_normal_abspath_result" ; then + func_normal_abspath_result=/ + fi + break + fi + func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcar"` + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcdr"` + # Figure out what to do with it + case $func_normal_abspath_tcomponent in + "") + # Trailing empty path component, ignore it. + ;; + ..) + # Parent dir; strip last assembled component from result. + func_dirname "$func_normal_abspath_result" + func_normal_abspath_result=$func_dirname_result + ;; + *) + # Actual path component, append it. + func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent + ;; + esac + done + # Restore leading double-slash if one was found on entry. + func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result +} + +# func_relative_path SRCDIR DSTDIR +# generates a relative path from SRCDIR to DSTDIR, with a trailing +# slash if non-empty, suitable for immediately appending a filename +# without needing to append a separator. +# value returned in "$func_relative_path_result" +func_relative_path () +{ + func_relative_path_result= + func_normal_abspath "$1" + func_relative_path_tlibdir=$func_normal_abspath_result + func_normal_abspath "$2" + func_relative_path_tbindir=$func_normal_abspath_result + + # Ascend the tree starting from libdir + while :; do + # check if we have found a prefix of bindir + case $func_relative_path_tbindir in + $func_relative_path_tlibdir) + # found an exact match + func_relative_path_tcancelled= + break + ;; + $func_relative_path_tlibdir*) + # found a matching prefix + func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" + func_relative_path_tcancelled=$func_stripname_result + if test -z "$func_relative_path_result"; then + func_relative_path_result=. + fi + break + ;; + *) + func_dirname $func_relative_path_tlibdir + func_relative_path_tlibdir=${func_dirname_result} + if test "x$func_relative_path_tlibdir" = x ; then + # Have to descend all the way to the root! + func_relative_path_result=../$func_relative_path_result + func_relative_path_tcancelled=$func_relative_path_tbindir + break + fi + func_relative_path_result=../$func_relative_path_result + ;; + esac + done + + # Now calculate path; take care to avoid doubling-up slashes. + func_stripname '' '/' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + func_stripname '/' '/' "$func_relative_path_tcancelled" + if test "x$func_stripname_result" != x ; then + func_relative_path_result=${func_relative_path_result}/${func_stripname_result} + fi + + # Normalisation. If bindir is libdir, return empty string, + # else relative path ending with a slash; either way, target + # file name can be directly appended. + if test ! -z "$func_relative_path_result"; then + func_stripname './' '' "$func_relative_path_result/" + func_relative_path_result=$func_stripname_result + fi +} + +# The name of this program: +func_dirname_and_basename "$progpath" +progname=$func_basename_result + +# Make sure we have an absolute path for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=$func_dirname_result + progdir=`cd "$progdir" && pwd` + progpath="$progdir/$progname" + ;; + *) + save_IFS="$IFS" + IFS=${PATH_SEPARATOR-:} + for progdir in $PATH; do + IFS="$save_IFS" + test -x "$progdir/$progname" && break + done + IFS="$save_IFS" + test -n "$progdir" || progdir=`pwd` + progpath="$progdir/$progname" + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([`"$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution that turns a string into a regex matching for the +# string literally. +sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' + +# Sed substitution that converts a w32 file name or path +# which contains forward slashes, into one that contains +# (escaped) backslashes. A very naive implementation. +lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + +# Re-`\' parameter expansions in output of double_quote_subst that were +# `\'-ed in input to the same. If an odd number of `\' preceded a '$' +# in input to double_quote_subst, that '$' was protected from expansion. +# Since each input `\' is now two `\'s, look for any number of runs of +# four `\'s followed by two `\'s and then a '$'. `\' that '$'. +bs='\\' +bs2='\\\\' +bs4='\\\\\\\\' +dollar='\$' +sed_double_backslash="\ + s/$bs4/&\\ +/g + s/^$bs2$dollar/$bs&/ + s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g + s/\n//g" + +# Standard options: +opt_dry_run=false +opt_help=false +opt_quiet=false +opt_verbose=false +opt_warning=: + +# func_echo arg... +# Echo program name prefixed message, along with the current mode +# name if it has been set yet. +func_echo () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }$*" +} + +# func_verbose arg... +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $opt_verbose && func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +# func_error arg... +# Echo program name prefixed message to standard error. +func_error () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 +} + +# func_warning arg... +# Echo program name prefixed warning message to standard error. +func_warning () +{ + $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +} + +# func_fatal_error arg... +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + +# func_fatal_help arg... +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + func_error ${1+"$@"} + func_fatal_error "$help" +} +help="Try \`$progname --help' for more information." ## default + + +# func_grep expression filename +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_mkdir_p directory-path +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + my_directory_path="$1" + my_dir_list= + + if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + + # Protect directory names starting with `-' + case $my_directory_path in + -*) my_directory_path="./$my_directory_path" ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$my_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + my_dir_list="$my_directory_path:$my_dir_list" + + # If the last portion added has no slash in it, the list is done + case $my_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + done + my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + + save_mkdir_p_IFS="$IFS"; IFS=':' + for my_dir in $my_dir_list; do + IFS="$save_mkdir_p_IFS" + # mkdir can fail with a `File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$my_dir" 2>/dev/null || : + done + IFS="$save_mkdir_p_IFS" + + # Bail out if we (or some other process) failed to create a directory. + test -d "$my_directory_path" || \ + func_fatal_error "Failed to create \`$1'" + fi +} + + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$opt_dry_run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || \ + func_fatal_error "cannot create temporary directory \`$my_tmpdir'" + fi + + $ECHO "$my_tmpdir" +} + + +# func_quote_for_eval arg +# Aesthetically quote ARG to be evaled later. +# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT +# is double-quoted, suitable for a subsequent eval, whereas +# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters +# which are still active within double quotes backslashified. +func_quote_for_eval () +{ + case $1 in + *[\\\`\"\$]*) + func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; + *) + func_quote_for_eval_unquoted_result="$1" ;; + esac + + case $func_quote_for_eval_unquoted_result in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and and variable + # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" + ;; + *) + func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +} + + +# func_quote_for_expand arg +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + case $1 in + *[\\\`\"]*) + my_arg=`$ECHO "$1" | $SED \ + -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) + my_arg="$1" ;; + esac + + case $my_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + my_arg="\"$my_arg\"" + ;; + esac + + func_quote_for_expand_result="$my_arg" +} + + +# func_show_eval cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$my_cmd" + my_status=$? + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + + +# func_show_eval_locale cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$lt_user_locale + $my_cmd" + my_status=$? + eval "$lt_safe_locale" + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + +# func_tr_sh +# Turn $1 into a string suitable for a shell variable name. +# Result is stored in $func_tr_sh_result. All characters +# not in the set a-zA-Z0-9_ are replaced with '_'. Further, +# if $1 begins with a digit, a '_' is prepended as well. +func_tr_sh () +{ + case $1 in + [0-9]* | *[!a-zA-Z0-9_]*) + func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` + ;; + * ) + func_tr_sh_result=$1 + ;; + esac +} + + +# func_version +# Echo version message to standard output and exit. +func_version () +{ + $opt_debug + + $SED -n '/(C)/!b go + :more + /\./!{ + N + s/\n# / / + b more + } + :go + /^# '$PROGRAM' (GNU /,/# warranty; / { + s/^# // + s/^# *$// + s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ + p + }' < "$progpath" + exit $? +} + +# func_usage +# Echo short help message to standard output and exit. +func_usage () +{ + $opt_debug + + $SED -n '/^# Usage:/,/^# *.*--help/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ + p + }' < "$progpath" + echo + $ECHO "run \`$progname --help | more' for full usage" + exit $? +} + +# func_help [NOEXIT] +# Echo long help message to standard output and exit, +# unless 'noexit' is passed as argument. +func_help () +{ + $opt_debug + + $SED -n '/^# Usage:/,/# Report bugs to/ { + :print + s/^# // + s/^# *$// + s*\$progname*'$progname'* + s*\$host*'"$host"'* + s*\$SHELL*'"$SHELL"'* + s*\$LTCC*'"$LTCC"'* + s*\$LTCFLAGS*'"$LTCFLAGS"'* + s*\$LD*'"$LD"'* + s/\$with_gnu_ld/'"$with_gnu_ld"'/ + s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ + p + d + } + /^# .* home page:/b print + /^# General help using/b print + ' < "$progpath" + ret=$? + if test -z "$1"; then + exit $ret + fi +} + +# func_missing_arg argname +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + $opt_debug + + func_error "missing argument for $1." + exit_cmd=exit +} + + +# func_split_short_opt shortopt +# Set func_split_short_opt_name and func_split_short_opt_arg shell +# variables after splitting SHORTOPT after the 2nd character. +func_split_short_opt () +{ + my_sed_short_opt='1s/^\(..\).*$/\1/;q' + my_sed_short_rest='1s/^..\(.*\)$/\1/;q' + + func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` + func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` +} # func_split_short_opt may be replaced by extended shell implementation + + +# func_split_long_opt longopt +# Set func_split_long_opt_name and func_split_long_opt_arg shell +# variables after splitting LONGOPT at the `=' sign. +func_split_long_opt () +{ + my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' + my_sed_long_arg='1s/^--[^=]*=//' + + func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` + func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` +} # func_split_long_opt may be replaced by extended shell implementation + +exit_cmd=: + + + + + +magic="%%%MAGIC variable%%%" +magic_exe="%%%MAGIC EXE variable%%%" + +# Global variables. +nonopt= +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "${1}=\$${1}\${2}" +} # func_append may be replaced by extended shell implementation + +# func_append_quoted var value +# Quote VALUE and append to the end of shell variable VAR, separated +# by a space. +func_append_quoted () +{ + func_quote_for_eval "${2}" + eval "${1}=\$${1}\\ \$func_quote_for_eval_result" +} # func_append_quoted may be replaced by extended shell implementation + + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "${@}"` +} # func_arith may be replaced by extended shell implementation + + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` +} # func_len may be replaced by extended shell implementation + + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +} # func_lo2o may be replaced by extended shell implementation + + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +} # func_xform may be replaced by extended shell implementation + + +# func_fatal_configuration arg... +# Echo program name prefixed message to standard error, followed by +# a configuration failure hint, and exit. +func_fatal_configuration () +{ + func_error ${1+"$@"} + func_error "See the $PACKAGE documentation for more information." + func_fatal_error "Fatal configuration error." +} + + +# func_config +# Display the configuration for all the tags in this script. +func_config () +{ + re_begincf='^# ### BEGIN LIBTOOL' + re_endcf='^# ### END LIBTOOL' + + # Default configuration. + $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + + # Now print the configurations for the tags. + for tagname in $taglist; do + $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done + + exit $? +} + +# func_features +# Display the features supported by this script. +func_features () +{ + echo "host: $host" + if test "$build_libtool_libs" = yes; then + echo "enable shared libraries" + else + echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + echo "enable static libraries" + else + echo "disable static libraries" + fi + + exit $? +} + +# func_enable_tag tagname +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname="$1" + + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf="/$re_begincf/,/$re_endcf/p" + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" + ;; + esac + + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" + + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac +} + +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH + fi +} + + +# Shorthand for --mode=foo, only valid as the first argument +case $1 in +clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; +compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; +execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; +finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; +install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; +link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; +uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; +esac + + + +# Option defaults: +opt_debug=: +opt_dry_run=false +opt_config=false +opt_preserve_dup_deps=false +opt_features=false +opt_finish=false +opt_help=false +opt_help_all=false +opt_silent=: +opt_warning=: +opt_verbose=: +opt_silent=false +opt_verbose=false + + +# Parse options once, thoroughly. This comes as soon as possible in the +# script to make things like `--version' happen as quickly as we can. +{ + # this just eases exit handling + while test $# -gt 0; do + opt="$1" + shift + case $opt in + --debug|-x) opt_debug='set -x' + func_echo "enabling shell trace mode" + $opt_debug + ;; + --dry-run|--dryrun|-n) + opt_dry_run=: + ;; + --config) + opt_config=: +func_config + ;; + --dlopen|-dlopen) + optarg="$1" + opt_dlopen="${opt_dlopen+$opt_dlopen +}$optarg" + shift + ;; + --preserve-dup-deps) + opt_preserve_dup_deps=: + ;; + --features) + opt_features=: +func_features + ;; + --finish) + opt_finish=: +set dummy --mode finish ${1+"$@"}; shift + ;; + --help) + opt_help=: + ;; + --help-all) + opt_help_all=: +opt_help=': help-all' + ;; + --mode) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_mode="$optarg" +case $optarg in + # Valid mode arguments: + clean|compile|execute|finish|install|link|relink|uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; +esac + shift + ;; + --no-silent|--no-quiet) + opt_silent=false +func_append preserve_args " $opt" + ;; + --no-warning|--no-warn) + opt_warning=false +func_append preserve_args " $opt" + ;; + --no-verbose) + opt_verbose=false +func_append preserve_args " $opt" + ;; + --silent|--quiet) + opt_silent=: +func_append preserve_args " $opt" + opt_verbose=false + ;; + --verbose|-v) + opt_verbose=: +func_append preserve_args " $opt" +opt_silent=false + ;; + --tag) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_tag="$optarg" +func_append preserve_args " $opt $optarg" +func_enable_tag "$optarg" + shift + ;; + + -\?|-h) func_usage ;; + --help) func_help ;; + --version) func_version ;; + + # Separate optargs to long options: + --*=*) + func_split_long_opt "$opt" + set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} + shift + ;; + + # Separate non-argument short options: + -\?*|-h*|-n*|-v*) + func_split_short_opt "$opt" + set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + --) break ;; + -*) func_fatal_help "unrecognized option \`$opt'" ;; + *) set dummy "$opt" ${1+"$@"}; shift; break ;; + esac + done + + # Validate options: + + # save first non-option argument + if test "$#" -gt 0; then + nonopt="$opt" + shift + fi + + # preserve --debug + test "$opt_debug" = : || func_append preserve_args " --debug" + + case $host in + *cygwin* | *mingw* | *pw32* | *cegcc*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + ;; + esac + + $opt_help || { + # Sanity checks first: + func_check_version_match + + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$opt_dlopen" && test "$opt_mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$opt_mode' for more information." + } + + + # Bail if the options were screwed + $exit_cmd $EXIT_FAILURE +} + + + + +## ----------- ## +## Main. ## +## ----------- ## + +# func_lalib_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null \ + | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + +# func_lalib_unsafe_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if `file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case "$lalib_p_line" in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test "$lalib_p" = yes +} + +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + func_lalib_p "$1" +} + +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} + +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" +} + +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} + + +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $opt_debug + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs + eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} + + +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# `FILE.' does not work on cygwin managed mounts. +func_source () +{ + $opt_debug + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; + esac +} + + +# func_resolve_sysroot PATH +# Replace a leading = in PATH with a sysroot. Store the result into +# func_resolve_sysroot_result +func_resolve_sysroot () +{ + func_resolve_sysroot_result=$1 + case $func_resolve_sysroot_result in + =*) + func_stripname '=' '' "$func_resolve_sysroot_result" + func_resolve_sysroot_result=$lt_sysroot$func_stripname_result + ;; + esac +} + +# func_replace_sysroot PATH +# If PATH begins with the sysroot, replace it with = and +# store the result into func_replace_sysroot_result. +func_replace_sysroot () +{ + case "$lt_sysroot:$1" in + ?*:"$lt_sysroot"*) + func_stripname "$lt_sysroot" '' "$1" + func_replace_sysroot_result="=$func_stripname_result" + ;; + *) + # Including no sysroot. + func_replace_sysroot_result=$1 + ;; + esac +} + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + $opt_debug + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` + case "$@ " in + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with \`--tag'" +# else +# func_verbose "using $tagname tagged configuration" + fi + ;; + esac + fi +} + + + +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () +{ + write_libobj=${1} + if test "$build_libtool_libs" = yes; then + write_lobj=\'${2}\' + else + write_lobj=none + fi + + if test "$build_old_libs" = yes; then + write_oldobj=\'${3}\' + else + write_oldobj=none + fi + + $opt_dry_run || { + cat >${write_libobj}T </dev/null` + if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then + func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | + $SED -e "$lt_sed_naive_backslashify"` + else + func_convert_core_file_wine_to_w32_result= + fi + fi +} +# end: func_convert_core_file_wine_to_w32 + + +# func_convert_core_path_wine_to_w32 ARG +# Helper function used by path conversion functions when $build is *nix, and +# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly +# configured wine environment available, with the winepath program in $build's +# $PATH. Assumes ARG has no leading or trailing path separator characters. +# +# ARG is path to be converted from $build format to win32. +# Result is available in $func_convert_core_path_wine_to_w32_result. +# Unconvertible file (directory) names in ARG are skipped; if no directory names +# are convertible, then the result may be empty. +func_convert_core_path_wine_to_w32 () +{ + $opt_debug + # unfortunately, winepath doesn't convert paths, only file names + func_convert_core_path_wine_to_w32_result="" + if test -n "$1"; then + oldIFS=$IFS + IFS=: + for func_convert_core_path_wine_to_w32_f in $1; do + IFS=$oldIFS + func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" + if test -n "$func_convert_core_file_wine_to_w32_result" ; then + if test -z "$func_convert_core_path_wine_to_w32_result"; then + func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" + else + func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" + fi + fi + done + IFS=$oldIFS + fi +} +# end: func_convert_core_path_wine_to_w32 + + +# func_cygpath ARGS... +# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when +# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) +# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or +# (2), returns the Cygwin file name or path in func_cygpath_result (input +# file name or path is assumed to be in w32 format, as previously converted +# from $build's *nix or MSYS format). In case (3), returns the w32 file name +# or path in func_cygpath_result (input file name or path is assumed to be in +# Cygwin format). Returns an empty string on error. +# +# ARGS are passed to cygpath, with the last one being the file name or path to +# be converted. +# +# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH +# environment variable; do not put it in $PATH. +func_cygpath () +{ + $opt_debug + if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then + func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` + if test "$?" -ne 0; then + # on failure, ensure result is empty + func_cygpath_result= + fi + else + func_cygpath_result= + func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" + fi +} +#end: func_cygpath + + +# func_convert_core_msys_to_w32 ARG +# Convert file name or path ARG from MSYS format to w32 format. Return +# result in func_convert_core_msys_to_w32_result. +func_convert_core_msys_to_w32 () +{ + $opt_debug + # awkward: cmd appends spaces to result + func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | + $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` +} +#end: func_convert_core_msys_to_w32 + + +# func_convert_file_check ARG1 ARG2 +# Verify that ARG1 (a file name in $build format) was converted to $host +# format in ARG2. Otherwise, emit an error message, but continue (resetting +# func_to_host_file_result to ARG1). +func_convert_file_check () +{ + $opt_debug + if test -z "$2" && test -n "$1" ; then + func_error "Could not determine host file name corresponding to" + func_error " \`$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_file_result="$1" + fi +} +# end func_convert_file_check + + +# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH +# Verify that FROM_PATH (a path in $build format) was converted to $host +# format in TO_PATH. Otherwise, emit an error message, but continue, resetting +# func_to_host_file_result to a simplistic fallback value (see below). +func_convert_path_check () +{ + $opt_debug + if test -z "$4" && test -n "$3"; then + func_error "Could not determine the host path corresponding to" + func_error " \`$3'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This is a deliberately simplistic "conversion" and + # should not be "improved". See libtool.info. + if test "x$1" != "x$2"; then + lt_replace_pathsep_chars="s|$1|$2|g" + func_to_host_path_result=`echo "$3" | + $SED -e "$lt_replace_pathsep_chars"` + else + func_to_host_path_result="$3" + fi + fi +} +# end func_convert_path_check + + +# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG +# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT +# and appending REPL if ORIG matches BACKPAT. +func_convert_path_front_back_pathsep () +{ + $opt_debug + case $4 in + $1 ) func_to_host_path_result="$3$func_to_host_path_result" + ;; + esac + case $4 in + $2 ) func_append func_to_host_path_result "$3" + ;; + esac +} +# end func_convert_path_front_back_pathsep + + +################################################## +# $build to $host FILE NAME CONVERSION FUNCTIONS # +################################################## +# invoked via `$to_host_file_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# Result will be available in $func_to_host_file_result. + + +# func_to_host_file ARG +# Converts the file name ARG from $build format to $host format. Return result +# in func_to_host_file_result. +func_to_host_file () +{ + $opt_debug + $to_host_file_cmd "$1" +} +# end func_to_host_file + + +# func_to_tool_file ARG LAZY +# converts the file name ARG from $build format to toolchain format. Return +# result in func_to_tool_file_result. If the conversion in use is listed +# in (the comma separated) LAZY, no conversion takes place. +func_to_tool_file () +{ + $opt_debug + case ,$2, in + *,"$to_tool_file_cmd",*) + func_to_tool_file_result=$1 + ;; + *) + $to_tool_file_cmd "$1" + func_to_tool_file_result=$func_to_host_file_result + ;; + esac +} +# end func_to_tool_file + + +# func_convert_file_noop ARG +# Copy ARG to func_to_host_file_result. +func_convert_file_noop () +{ + func_to_host_file_result="$1" +} +# end func_convert_file_noop + + +# func_convert_file_msys_to_w32 ARG +# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_file_result. +func_convert_file_msys_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_to_host_file_result="$func_convert_core_msys_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_w32 + + +# func_convert_file_cygwin_to_w32 ARG +# Convert file name ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_file_cygwin_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # because $build is cygwin, we call "the" cygpath in $PATH; no need to use + # LT_CYGPATH in this case. + func_to_host_file_result=`cygpath -m "$1"` + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_cygwin_to_w32 + + +# func_convert_file_nix_to_w32 ARG +# Convert file name ARG from *nix to w32 format. Requires a wine environment +# and a working winepath. Returns result in func_to_host_file_result. +func_convert_file_nix_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_file_wine_to_w32 "$1" + func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_w32 + + +# func_convert_file_msys_to_cygwin ARG +# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_file_msys_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_cygpath -u "$func_convert_core_msys_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_cygwin + + +# func_convert_file_nix_to_cygwin ARG +# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed +# in a wine environment, working winepath, and LT_CYGPATH set. Returns result +# in func_to_host_file_result. +func_convert_file_nix_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. + func_convert_core_file_wine_to_w32 "$1" + func_cygpath -u "$func_convert_core_file_wine_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_cygwin + + +############################################# +# $build to $host PATH CONVERSION FUNCTIONS # +############################################# +# invoked via `$to_host_path_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# The result will be available in $func_to_host_path_result. +# +# Path separators are also converted from $build format to $host format. If +# ARG begins or ends with a path separator character, it is preserved (but +# converted to $host format) on output. +# +# All path conversion functions are named using the following convention: +# file name conversion function : func_convert_file_X_to_Y () +# path conversion function : func_convert_path_X_to_Y () +# where, for any given $build/$host combination the 'X_to_Y' value is the +# same. If conversion functions are added for new $build/$host combinations, +# the two new functions must follow this pattern, or func_init_to_host_path_cmd +# will break. + + +# func_init_to_host_path_cmd +# Ensures that function "pointer" variable $to_host_path_cmd is set to the +# appropriate value, based on the value of $to_host_file_cmd. +to_host_path_cmd= +func_init_to_host_path_cmd () +{ + $opt_debug + if test -z "$to_host_path_cmd"; then + func_stripname 'func_convert_file_' '' "$to_host_file_cmd" + to_host_path_cmd="func_convert_path_${func_stripname_result}" + fi +} + + +# func_to_host_path ARG +# Converts the path ARG from $build format to $host format. Return result +# in func_to_host_path_result. +func_to_host_path () +{ + $opt_debug + func_init_to_host_path_cmd + $to_host_path_cmd "$1" +} +# end func_to_host_path + + +# func_convert_path_noop ARG +# Copy ARG to func_to_host_path_result. +func_convert_path_noop () +{ + func_to_host_path_result="$1" +} +# end func_convert_path_noop + + +# func_convert_path_msys_to_w32 ARG +# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_path_result. +func_convert_path_msys_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from ARG. MSYS + # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; + # and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_msys_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_msys_to_w32 + + +# func_convert_path_cygwin_to_w32 ARG +# Convert path ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_path_cygwin_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_cygwin_to_w32 + + +# func_convert_path_nix_to_w32 ARG +# Convert path ARG from *nix to w32 format. Requires a wine environment and +# a working winepath. Returns result in func_to_host_file_result. +func_convert_path_nix_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_nix_to_w32 + + +# func_convert_path_msys_to_cygwin ARG +# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_path_msys_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_msys_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_msys_to_cygwin + + +# func_convert_path_nix_to_cygwin ARG +# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a +# a wine environment, working winepath, and LT_CYGPATH set. Returns result in +# func_to_host_file_result. +func_convert_path_nix_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" + fi +} +# end func_convert_path_nix_to_cygwin + + +# func_mode_compile arg... +func_mode_compile () +{ + $opt_debug + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + pie_flag= + + for arg + do + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; + + target ) + libobj="$arg" + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + test -n "$libobj" && \ + func_fatal_error "you cannot specify \`-o' more than once" + arg_mode=target + continue + ;; + + -pie | -fpie | -fPIE) + func_append pie_flag " $arg" + continue + ;; + + -shared | -static | -prefer-pic | -prefer-non-pic) + func_append later " $arg" + continue + ;; + + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + func_append_quoted lastarg "$arg" + done + IFS="$save_ifs" + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result + + # Add the arguments to base_compile. + func_append base_compile " $lastarg" + continue + ;; + + *) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + func_append_quoted base_compile "$lastarg" + done # for arg + + case $arg_mode in + arg) + func_fatal_error "you must specify an argument for -Xcompile" + ;; + target) + func_fatal_error "you must specify a target with \`-o'" + ;; + *) + # Get the name of the library object. + test -z "$libobj" && { + func_basename "$srcfile" + libobj="$func_basename_result" + } + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + case $libobj in + *.[cCFSifmso] | \ + *.ada | *.adb | *.ads | *.asm | \ + *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ + *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) + func_xform "$libobj" + libobj=$func_xform_result + ;; + esac + + case $libobj in + *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; + *) + func_fatal_error "cannot determine name of library object from \`$libobj'" + ;; + esac + + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + continue + ;; + + -static) + build_libtool_libs=no + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ + && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && func_warning "libobj name \`$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname="$func_basename_result" + xdir="$func_dirname_result" + lobj=${xdir}$objdir/$objname + + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2* | cegcc*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $ECHO "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + func_append removelist " $output_obj" + $ECHO "$srcfile" > "$lockfile" + fi + + $opt_dry_run || $RM $removelist + func_append removelist " $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 + + func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 + srcfile=$func_to_tool_file_result + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test "$pic_mode" != no; then + command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $qsrcfile" + fi + + func_mkdir_p "$xdir$objdir" + + if test -z "$output_obj"; then + # Place PIC objects in $objdir + func_append command " -o $lobj" + fi + + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + + # Allow error messages only from the first compilation. + if test "$suppress_opt" = yes; then + suppress_output=' >/dev/null 2>&1' + fi + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $qsrcfile$pie_flag" + else + command="$base_compile $qsrcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then + func_append command " -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + func_append command "$suppress_output" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $ECHO "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $opt_dry_run || $RM $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + fi + + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + removelist=$lockfile + $RM "$lockfile" + fi + } + + exit $EXIT_SUCCESS +} + +$opt_help || { + test "$opt_mode" = compile && func_mode_compile ${1+"$@"} +} + +func_mode_help () +{ + # We need to display help for each of the modes. + case $opt_mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; + + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to build PIC objects only + -prefer-non-pic try to build non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + -Wc,FLAG pass FLAG directly to the compiler + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The following components of INSTALL-COMMAND are treated specially: + + -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -bindir BINDIR specify path to binaries directory (for systems where + libraries must be found in the PATH setting at runtime) + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + -Wc,FLAG + -Xcompiler FLAG pass linker-specific FLAG directly to the compiler + -Wl,FLAG + -Xlinker FLAG pass linker-specific FLAG directly to the linker + -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode \`$opt_mode'" + ;; + esac + + echo + $ECHO "Try \`$progname --help' for more information about other modes." +} + +# Now that we've collected a possible --mode arg, show help if necessary +if $opt_help; then + if test "$opt_help" = :; then + func_mode_help + else + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + func_mode_help + done + } | sed -n '1p; 2,$s/^Usage:/ or: /p' + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + echo + func_mode_help + done + } | + sed '1d + /^When reporting/,/^Report/{ + H + d + } + $x + /information about other modes/d + /more detailed .*MODE/d + s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' + fi + exit $? +fi + + +# func_mode_execute arg... +func_mode_execute () +{ + $opt_debug + # The first argument is the command name. + cmd="$nonopt" + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. + for file in $opt_dlopen; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" + + dir= + case $file in + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "\`$file' was not linked with \`-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir="$func_dirname_result" + + if test -f "$dir/$objdir/$dlname"; then + func_append dir "/$objdir" + else + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + fi + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir="$func_dirname_result" + ;; + + *) + func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -* | *.la | *.lo ) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file="$progdir/$program" + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_append_quoted args "$file" + done + + if test "X$opt_dry_run" = Xfalse; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + echo "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS + fi +} + +test "$opt_mode" = execute && func_mode_execute ${1+"$@"} + + +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libs= + libdirs= + admincmds= + + for opt in "$nonopt" ${1+"$@"} + do + if test -d "$opt"; then + func_append libdirs " $opt" + + elif test -f "$opt"; then + if func_lalib_unsafe_p "$opt"; then + func_append libs " $opt" + else + func_warning "\`$opt' is not a valid libtool archive" + fi + + else + func_fatal_error "invalid argument \`$opt'" + fi + done + + if test -n "$libs"; then + if test -n "$lt_sysroot"; then + sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` + sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" + else + sysroot_cmd= + fi + + # Remove sysroot references + if $opt_dry_run; then + for lib in $libs; do + echo "removing references to $lt_sysroot and \`=' prefixes from $lib" + done + else + tmpdir=`func_mktempdir` + for lib in $libs; do + sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ + > $tmpdir/tmp-la + mv -f $tmpdir/tmp-la $lib + done + ${RM}r "$tmpdir" + fi + fi + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || func_append admincmds " + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + echo + + echo "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" + echo "pages." + ;; + *) + echo "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + echo "----------------------------------------------------------------------" + fi + exit $EXIT_SUCCESS +} + +test "$opt_mode" = finish && func_mode_finish ${1+"$@"} + + +# func_mode_install arg... +func_mode_install () +{ + $opt_debug + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + case $nonopt in *shtool*) :;; *) false;; esac; then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + func_append install_prog "$func_quote_for_eval_result" + install_shared_prog=$install_prog + case " $install_prog " in + *[\\\ /]cp\ *) install_cp=: ;; + *) install_cp=false ;; + esac + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + no_mode=: + for arg + do + arg2= + if test -n "$dest"; then + func_append files " $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + if $install_cp; then :; else + prev=$arg + fi + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + if test "x$prev" = x-m && test -n "$install_override_mode"; then + arg2=$install_override_mode + no_mode=false + fi + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + func_append install_prog " $func_quote_for_eval_result" + if test -n "$arg2"; then + func_quote_for_eval "$arg2" + fi + func_append install_shared_prog " $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" + + test -n "$prev" && \ + func_fatal_help "the \`$prev' option requires an argument" + + if test -n "$install_override_mode" && $no_mode; then + if $install_cp; then :; else + func_quote_for_eval "$install_override_mode" + func_append install_shared_prog " -m $func_quote_for_eval_result" + fi + fi + + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" + fi + fi + + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir="$func_dirname_result" + destname="$func_basename_result" + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "\`$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "\`$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + func_append staticlibs " $file" + ;; + + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) func_append current_libdirs " $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) func_append future_libdirs " $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir="$func_dirname_result" + func_append dir "$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname="$1" + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme="$stripme" + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme="" + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + + # Install the pseudo-library for information purposes. + func_basename "$file" + name="$func_basename_result" + instname="$dir/$name"i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && func_append staticlibs " $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to \`$destfile'" + ;; + esac + + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script \`$wrapper'" + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "\`$lib' has not been installed in \`$libdir'" + finalize=no + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + $opt_dry_run || { + if test "$finalize" = yes; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file="$func_basename_result" + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_silent || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink \`$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file="$outputname" + else + func_warning "cannot relink \`$file'" + fi + } + else + # Install the binary that we compiled earlier. + file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done + + for file in $staticlibs; do + func_basename "$file" + name="$func_basename_result" + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $tool_oldlib" 'exit $?' + fi + + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} + +test "$opt_mode" = install && func_mode_install ${1+"$@"} + + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $opt_debug + my_outputname="$1" + my_originator="$2" + my_pic_p="${3-no}" + my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms="${my_outputname}S.c" + else + func_error "not configured to extract global symbols from dlpreopened files" + fi + fi + + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${my_outputname}.nm" + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" +#endif + +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + func_verbose "generating symbol list for \`$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_to_tool_file "$progfile" func_convert_file_msys_to_w32 + func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" + $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols + eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi + + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" + case $host in + *cygwin* | *mingw* | *cegcc* ) + # if an import library, we need to obtain dlname + if func_win32_import_lib_p "$dlprefile"; then + func_tr_sh "$dlprefile" + eval "curr_lafile=\$libfile_$func_tr_sh_result" + dlprefile_dlbasename="" + if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then + # Use subshell, to avoid clobbering current variable values + dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` + if test -n "$dlprefile_dlname" ; then + func_basename "$dlprefile_dlname" + dlprefile_dlbasename="$func_basename_result" + else + # no lafile. user explicitly requested -dlpreopen . + $sharedlib_from_linklib_cmd "$dlprefile" + dlprefile_dlbasename=$sharedlib_from_linklib_result + fi + fi + $opt_dry_run || { + if test -n "$dlprefile_dlbasename" ; then + eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' + else + func_warning "Could not compute DLL name from $name" + eval '$ECHO ": $name " >> "$nlist"' + fi + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | + $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" + } + else # not an import lib + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + fi + ;; + *) + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + ;; + esac + done + + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 /dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + echo '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + + echo >> "$output_objdir/$my_dlsyms" "\ + +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +extern LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[]; +LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{\ + { \"$my_originator\", (void *) 0 }," + + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + echo >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + if test "X$my_pic_p" != Xno; then + pic_flag_for_symtable=" $pic_flag" + fi + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) func_append symtab_cflags " $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + + # Transform the symbol file into the correct name. + symfileobj="$output_objdir/${my_outputname}S.$objext" + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + else + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + fi + ;; + *) + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *) + func_fatal_error "unknown suffix for \`$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` + fi +} + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +# Despite the name, also deal with 64 bit binaries. +func_win32_libid () +{ + $opt_debug + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then + func_to_tool_file "$1" func_convert_file_msys_to_w32 + win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $SED -n -e ' + 1,100{ + / I /{ + s,.*,import, + p + q + } + }'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" +} + +# func_cygming_dll_for_implib ARG +# +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib () +{ + $opt_debug + sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` +} + +# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs +# +# The is the core of a fallback implementation of a +# platform-specific function to extract the name of the +# DLL associated with the specified import library LIBNAME. +# +# SECTION_NAME is either .idata$6 or .idata$7, depending +# on the platform and compiler that created the implib. +# +# Echos the name of the DLL associated with the +# specified import library. +func_cygming_dll_for_implib_fallback_core () +{ + $opt_debug + match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` + $OBJDUMP -s --section "$1" "$2" 2>/dev/null | + $SED '/^Contents of section '"$match_literal"':/{ + # Place marker at beginning of archive member dllname section + s/.*/====MARK====/ + p + d + } + # These lines can sometimes be longer than 43 characters, but + # are always uninteresting + /:[ ]*file format pe[i]\{,1\}-/d + /^In archive [^:]*:/d + # Ensure marker is printed + /^====MARK====/p + # Remove all lines with less than 43 characters + /^.\{43\}/!d + # From remaining lines, remove first 43 characters + s/^.\{43\}//' | + $SED -n ' + # Join marker and all lines until next marker into a single line + /^====MARK====/ b para + H + $ b para + b + :para + x + s/\n//g + # Remove the marker + s/^====MARK====// + # Remove trailing dots and whitespace + s/[\. \t]*$// + # Print + /./p' | + # we now have a list, one entry per line, of the stringified + # contents of the appropriate section of all members of the + # archive which possess that section. Heuristic: eliminate + # all those which have a first or second character that is + # a '.' (that is, objdump's representation of an unprintable + # character.) This should work for all archives with less than + # 0x302f exports -- but will fail for DLLs whose name actually + # begins with a literal '.' or a single character followed by + # a '.'. + # + # Of those that remain, print the first one. + $SED -e '/^\./d;/^.\./d;q' +} + +# func_cygming_gnu_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is a GNU/binutils-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_gnu_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` + test -n "$func_cygming_gnu_implib_tmp" +} + +# func_cygming_ms_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is an MS-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_ms_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` + test -n "$func_cygming_ms_implib_tmp" +} + +# func_cygming_dll_for_implib_fallback ARG +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# +# This fallback implementation is for use when $DLLTOOL +# does not support the --identify-strict option. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib_fallback () +{ + $opt_debug + if func_cygming_gnu_implib_p "$1" ; then + # binutils import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` + elif func_cygming_ms_implib_p "$1" ; then + # ms-generated import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` + else + # unknown + sharedlib_from_linklib_result="" + fi +} + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $opt_debug + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + if test "$lock_old_archive_extraction" = yes; then + lockfile=$f_ex_an_ar_oldlib.lock + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ + 'stat=$?; rm -f "$lockfile"; exit $stat' + if test "$lock_old_archive_extraction" = yes; then + $opt_dry_run || rm -f "$lockfile" + fi + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi +} + + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $opt_debug + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib="$func_basename_result" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" + + func_mkdir_p "$my_xdir" + + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`basename "$darwin_archive"` + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` + done + + func_extract_archives_result="$my_oldobjs" +} + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=${1-no} + + $ECHO "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + file=\"\$0\"" + + qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` + $ECHO "\ + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + ECHO=\"$qECHO\" + fi + +# Very basic option parsing. These options are (a) specific to +# the libtool wrapper, (b) are identical between the wrapper +# /script/ and the wrapper /executable/ which is used only on +# windows platforms, and (c) all begin with the string "--lt-" +# (application programs are unlikely to have options which match +# this pattern). +# +# There are only two supported options: --lt-debug and +# --lt-dump-script. There is, deliberately, no --lt-help. +# +# The first argument to this parsing function should be the +# script's $0 value, followed by "$@". +lt_option_debug= +func_parse_lt_options () +{ + lt_script_arg0=\$0 + shift + for lt_opt + do + case \"\$lt_opt\" in + --lt-debug) lt_option_debug=1 ;; + --lt-dump-script) + lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` + test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. + lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` + cat \"\$lt_dump_D/\$lt_dump_F\" + exit 0 + ;; + --lt-*) + \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 + exit 1 + ;; + esac + done + + # Print the debug banner immediately: + if test -n \"\$lt_option_debug\"; then + echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 + fi +} + +# Used when --lt-debug. Prints its arguments to stdout +# (redirection is the responsibility of the caller) +func_lt_dump_args () +{ + lt_dump_args_N=1; + for lt_arg + do + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" + lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` + done +} + +# Core function for launching the target application +func_exec_program_core () +{ +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 +} + +# A function to encapsulate launching the target application +# Strips options in the --lt-* namespace from \$@ and +# launches target application with the remaining arguments. +func_exec_program () +{ + case \" \$* \" in + *\\ --lt-*) + for lt_wr_arg + do + case \$lt_wr_arg in + --lt-*) ;; + *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; + esac + shift + done ;; + esac + func_exec_program_core \${1+\"\$@\"} +} + + # Parse options + func_parse_lt_options \"\$0\" \${1+\"\$@\"} + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` + done + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # fixup the dll searchpath if we need to. + # + # Fix the DLL searchpath if we need to. Do this before prepending + # to shlibpath, because on Windows, both are PATH and uninstalled + # libraries must come first. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` + + export $shlibpath_var +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. + func_exec_program \${1+\"\$@\"} + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} + + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat < +#include +#ifdef _MSC_VER +# include +# include +# include +#else +# include +# include +# ifdef __CYGWIN__ +# include +# endif +#endif +#include +#include +#include +#include +#include +#include +#include +#include + +/* declarations of non-ANSI functions */ +#if defined(__MINGW32__) +# ifdef __STRICT_ANSI__ +int _putenv (const char *); +# endif +#elif defined(__CYGWIN__) +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +/* #elif defined (other platforms) ... */ +#endif + +/* portability defines, excluding path handling macros */ +#if defined(_MSC_VER) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +# define S_IXUSR _S_IEXEC +# ifndef _INTPTR_T_DEFINED +# define _INTPTR_T_DEFINED +# define intptr_t int +# endif +#elif defined(__MINGW32__) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +#elif defined(__CYGWIN__) +# define HAVE_SETENV +# define FOPEN_WB "wb" +/* #elif defined (other platforms) ... */ +#endif + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +/* path handling portability macros */ +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +#if defined(LT_DEBUGWRAPPER) +static int lt_debug = 1; +#else +static int lt_debug = 0; +#endif + +const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_debugprintf (const char *file, int line, const char *fmt, ...); +void lt_fatal (const char *file, int line, const char *message, ...); +static const char *nonnull (const char *s); +static const char *nonempty (const char *s); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); +char **prepare_spawn (char **argv); +void lt_dump_script (FILE *f); +EOF + + cat <= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", + nonempty (path)); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char *concat_name; + + lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", + nonempty (wrapper)); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + lt_debugprintf (__FILE__, __LINE__, + "checking path component for symlinks: %s\n", + tmp_pathspec); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + lt_fatal (__FILE__, __LINE__, + "error accessing file \"%s\": %s", + tmp_pathspec, nonnull (strerror (errno))); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal (__FILE__, __LINE__, + "could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp (str, pat) == 0) + *str = '\0'; + } + return str; +} + +void +lt_debugprintf (const char *file, int line, const char *fmt, ...) +{ + va_list args; + if (lt_debug) + { + (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); + } +} + +static void +lt_error_core (int exit_status, const char *file, + int line, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *file, int line, const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); + va_end (ap); +} + +static const char * +nonnull (const char *s) +{ + return s ? s : "(null)"; +} + +static const char * +nonempty (const char *s) +{ + return (s && !*s) ? "(empty)" : nonnull (s); +} + +void +lt_setenv (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_setenv) setting '%s' to '%s'\n", + nonnull (name), nonnull (value)); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + int len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} + +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + int orig_value_len = strlen (orig_value); + int add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} + +void +lt_update_exe_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + int len = strlen (new_value); + while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[len-1] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +void +lt_update_lib_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +EOF + case $host_os in + mingw*) + cat <<"EOF" + +/* Prepares an argument vector before calling spawn(). + Note that spawn() does not by itself call the command interpreter + (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : + ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); + GetVersionEx(&v); + v.dwPlatformId == VER_PLATFORM_WIN32_NT; + }) ? "cmd.exe" : "command.com"). + Instead it simply concatenates the arguments, separated by ' ', and calls + CreateProcess(). We must quote the arguments since Win32 CreateProcess() + interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a + special way: + - Space and tab are interpreted as delimiters. They are not treated as + delimiters if they are surrounded by double quotes: "...". + - Unescaped double quotes are removed from the input. Their only effect is + that within double quotes, space and tab are treated like normal + characters. + - Backslashes not followed by double quotes are not special. + - But 2*n+1 backslashes followed by a double quote become + n backslashes followed by a double quote (n >= 0): + \" -> " + \\\" -> \" + \\\\\" -> \\" + */ +#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +char ** +prepare_spawn (char **argv) +{ + size_t argc; + char **new_argv; + size_t i; + + /* Count number of arguments. */ + for (argc = 0; argv[argc] != NULL; argc++) + ; + + /* Allocate new argument vector. */ + new_argv = XMALLOC (char *, argc + 1); + + /* Put quoted arguments into the new argument vector. */ + for (i = 0; i < argc; i++) + { + const char *string = argv[i]; + + if (string[0] == '\0') + new_argv[i] = xstrdup ("\"\""); + else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) + { + int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); + size_t length; + unsigned int backslashes; + const char *s; + char *quoted_string; + char *p; + + length = 0; + backslashes = 0; + if (quote_around) + length++; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + length += backslashes + 1; + length++; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + length += backslashes + 1; + + quoted_string = XMALLOC (char, length + 1); + + p = quoted_string; + backslashes = 0; + if (quote_around) + *p++ = '"'; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + { + unsigned int j; + for (j = backslashes + 1; j > 0; j--) + *p++ = '\\'; + } + *p++ = c; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + { + unsigned int j; + for (j = backslashes; j > 0; j--) + *p++ = '\\'; + *p++ = '"'; + } + *p = '\0'; + + new_argv[i] = quoted_string; + } + else + new_argv[i] = (char *) string; + } + new_argv[argc] = NULL; + + return new_argv; +} +EOF + ;; + esac + + cat <<"EOF" +void lt_dump_script (FILE* f) +{ +EOF + func_emit_wrapper yes | + $SED -n -e ' +s/^\(.\{79\}\)\(..*\)/\1\ +\2/ +h +s/\([\\"]\)/\\\1/g +s/$/\\n/ +s/\([^\n]*\).*/ fputs ("\1", f);/p +g +D' + cat <<"EOF" +} +EOF +} +# end: func_emit_cwrapperexe_src + +# func_win32_import_lib_p ARG +# True if ARG is an import lib, as indicated by $file_magic_cmd +func_win32_import_lib_p () +{ + $opt_debug + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in + *import*) : ;; + *) false ;; + esac +} + +# func_mode_link arg... +func_mode_link () +{ + $opt_debug + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args=$nonopt + base_compile="$nonopt $@" + compile_command=$nonopt + finalize_command=$nonopt + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + new_inherited_linker_flags= + + avoid_version=no + bindir= + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + non_pic_objects= + precious_files_regex= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + weak_libs= + single_module="${wl}-single_module" + func_infer_tag $base_compile + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + break + ;; + -all-static | -static | -static-libtool-libs) + case $arg in + -all-static) + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + func_warning "complete static linking is impossible in this configuration" + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + -static) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + ;; + -static-libtool-libs) + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + ;; + esac + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" + ;; + esac + + case $prev in + bindir) + bindir="$arg" + prev= + continue + ;; + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + func_append dlfiles " $arg" + else + func_append dlprefiles " $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + test -f "$arg" \ + || func_fatal_error "symbol file \`$arg' does not exist" + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) func_append deplibs " $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat "$save_arg"` + do +# func_append moreargs " $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + done + else + func_fatal_error "link input file \`$arg' does not exist" + fi + arg=$save_arg + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) func_append rpath " $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) func_append xrpath " $arg" ;; + esac + fi + prev= + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + weak) + func_append weak_libs " $arg" + prev= + continue + ;; + xcclinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xcompiler) + func_append compiler_flags " $qarg" + prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" + continue + ;; + xlinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $wl$qarg" + prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + func_fatal_error "\`-allow-undefined' must not be used because it is the default" + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -bindir) + prev=bindir + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + func_fatal_error "more than one -exported-symbols argument is not allowed" + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework) + prev=framework + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + func_append compile_command " $arg" + func_append finalize_command " $arg" + ;; + esac + continue + ;; + + -L*) + func_stripname "-L" '' "$arg" + if test -z "$func_stripname_result"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between \`-L' and \`$1'" + else + func_fatal_error "need path for \`-L' option" + fi + fi + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of \`$dir'" + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "* | *" $arg "*) + # Will only happen for absolute or sysroot arguments + ;; + *) + # Preserve sysroot, but never include relative directories + case $dir in + [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; + *) func_append deplibs " -L$dir" ;; + esac + func_append lib_search_path " $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + ::) dllsearchpath=$dir;; + *) func_append dllsearchpath ":$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + func_append deplibs " System.ltframework" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + func_append deplibs " $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot|--sysroot) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) func_append new_inherited_linker_flags " $arg" ;; + esac + continue + ;; + + -multi_module) + single_module="${wl}-multi_module" + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + # The PATH hackery in wrapper scripts is required on Windows + # and Darwin in order for the loader to find any dlls it needs. + func_warning "\`-no-install' is ignored for $host" + func_warning "assuming \`-no-fast-install' instead" + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + func_stripname '-R' '' "$arg" + dir=$func_stripname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + =*) + func_stripname '=' '' "$dir" + dir=$lt_sysroot$func_stripname_result + ;; + *) + func_fatal_error "only absolute run-paths are allowed" + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + continue + ;; + + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -static | -static-libtool-libs) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -weak) + prev=weak + continue + ;; + + -Wc,*) + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + func_append arg " $func_quote_for_eval_result" + func_append compiler_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Wl,*) + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + func_quote_for_eval "$flag" + func_append arg " $wl$func_quote_for_eval_result" + func_append compiler_flags " $wl$func_quote_for_eval_result" + func_append linker_flags " $func_quote_for_eval_result" + done + IFS="$save_ifs" + func_stripname ' ' '' "$arg" + arg=$func_stripname_result + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + # Flags to be passed through unchanged, with rationale: + # -64, -mips[0-9] enable 64-bit mode for the SGI compiler + # -r[0-9][0-9]* specify processor for the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler + # +DA*, +DD* enable 64-bit mode for the HP compiler + # -q* compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* architecture-specific flags for GCC + # -F/path path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* profiling flags for GCC + # @file GCC response files + # -tp=* Portland pgcc target processor selection + # --sysroot=* for sysroot support + # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ + -O*|-flto*|-fwhopr*|-fuse-linker-plugin) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" + func_append compiler_flags " $arg" + continue + ;; + + # Some other compiler flag. + -* | +*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + *.$objext) + # A standard object. + func_append objs " $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if func_lalib_unsafe_p "$arg"; then + pic_object= + non_pic_object= + + # Read the .lo file + func_source "$arg" + + if test -z "$pic_object" || + test -z "$non_pic_object" || + test "$pic_object" = none && + test "$non_pic_object" = none; then + func_fatal_error "cannot find name of object for \`$arg'" + fi + + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + func_append dlfiles " $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + func_append dlprefiles " $pic_object" + prev= + fi + + # A PIC object. + func_append libobjs " $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + func_append non_pic_objects " $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + func_append non_pic_objects " $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if $opt_dry_run; then + # Extract subdirectory from the argument. + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" + fi + fi + ;; + + *.$libext) + # An archive. + func_append deplibs " $arg" + func_append old_deplibs " $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + func_resolve_sysroot "$arg" + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + func_append dlfiles " $func_resolve_sysroot_result" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + func_append dlprefiles " $func_resolve_sysroot_result" + prev= + else + func_append deplibs " $func_resolve_sysroot_result" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + done # argument parsing loop + + test -n "$prev" && \ + func_fatal_help "the \`$prevarg' option requires an argument" + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + func_append compile_command " $arg" + func_append finalize_command " $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + func_basename "$output" + outputname="$func_basename_result" + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" + func_to_tool_file "$output_objdir/" + tool_output_objdir=$func_to_tool_file_result + # Create the object directory. + func_mkdir_p "$output_objdir" + + # Determine the type of output + case $output in + "") + func_fatal_help "you must specify an output file" + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if $opt_preserve_dup_deps ; then + case "$libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append libs " $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if $opt_duplicate_compiler_generated_deps; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; + esac + func_append pre_post_deps " $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + + case $linkmode in + lib) + passes="conv dlpreopen link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test "$linkmode,$pass" = "lib,link"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs="$tmp_deplibs" + fi + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) + libs="$deplibs %DEPLIBS%" + test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" + ;; + esac + fi + if test "$linkmode,$pass" = "lib,dlpreopen"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + func_resolve_sysroot "$lib" + case $lib in + *.la) func_source "$func_resolve_sysroot_result" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + func_basename "$deplib" + deplib_base=$func_basename_result + case " $weak_libs " in + *" $deplib_base "*) ;; + *) func_append deplibs " $deplib" ;; + esac + done + done + libs="$dlprefiles" + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append compiler_flags " $deplib" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + func_warning "\`-l' is ignored for archives/objects" + continue + fi + func_stripname '-l' '' "$deplib" + name=$func_stripname_result + if test "$linkmode" = lib; then + searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" + else + searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" + fi + for searchdir in $searchdirs; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if func_lalib_p "$lib"; then + library_names= + old_library= + func_source "$lib" + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + *) + func_warning "\`-L' is ignored for archives/objects" + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + func_stripname '-R' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) func_append xrpath " $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) + func_resolve_sysroot "$deplib" + lib=$func_resolve_sysroot_result + ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + echo + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not use here." + else + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + ;; + esac + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + func_append newdlprefiles " $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + func_append newdlfiles " $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + + if test "$found" = yes || test -f "$lib"; then : + else + func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" + fi + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "\`$lib' is not a valid libtool archive" + + func_dirname "$lib" "" "." + ladir="$func_dirname_result" + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + inherited_linker_flags= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && func_append dlfiles " $dlopen" + test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + # It is a libtool convenience library, so add in its objects. + func_append convenience " $ladir/$objdir/$old_library" + func_append old_convenience " $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done + elif test "$linkmode" != prog && test "$linkmode" != lib; then + func_fatal_error "\`$lib' is not a convenience library" + fi + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + if test -n "$old_library" && + { test "$prefer_static_libs" = yes || + test "$prefer_static_libs,$installed" = "built,no"; }; then + linklib=$old_library + else + for l in $old_library $library_names; do + linklib="$l" + done + fi + if test -z "$linklib"; then + func_fatal_error "cannot find name of link library for \`$lib'" + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + func_fatal_error "cannot -dlopen a convenience library: \`$lib'" + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + func_append dlprefiles " $lib $dependency_libs" + else + func_append newdlfiles " $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "passing it literally to the linker, although it might fail" + abs_ladir="$ladir" + fi + ;; + esac + func_basename "$lib" + laname="$func_basename_result" + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + func_warning "library \`$lib' was moved." + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$lt_sysroot$libdir" + absdir="$lt_sysroot$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + func_append notinst_path " $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + func_append notinst_path " $abs_ladir" + fi + fi # $installed = yes + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" + fi + case "$host" in + # special handling for platforms with PE-DLLs. + *cygwin* | *mingw* | *cegcc* ) + # Linker will automatically link against shared library if both + # static and shared are present. Therefore, ensure we extract + # symbols from the import library if a shared library is present + # (otherwise, the dlopen module name will be incorrect). We do + # this by putting the import library name into $newdlprefiles. + # We recover the dlopen module name by 'saving' the la file + # name in a special purpose variable, and (later) extracting the + # dlname from the la file. + if test -n "$dlname"; then + func_tr_sh "$dir/$linklib" + eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" + func_append newdlprefiles " $dir/$linklib" + else + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + fi + ;; + * ) + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + func_append newdlprefiles " $dir/$dlname" + else + func_append newdlprefiles " $dir/$linklib" + fi + ;; + esac + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + func_append newlib_search_path " $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { { test "$prefer_static_libs" = no || + test "$prefer_static_libs,$installed" = "built,yes"; } || + test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath:" in + *"$absdir:"*) ;; + *) func_append temp_rpath "$absdir:" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + case $host in + *cygwin* | *mingw* | *cegcc*) + # No point in relinking DLLs because paths are not encoded + func_append notinst_deplibs " $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then + func_append notinst_deplibs " $lib" + need_relink=yes + fi + ;; + esac + # This is a shared library + + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule="" + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule="$dlpremoduletest" + break + fi + done + if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + echo + if test "$linkmode" = prog; then + $ECHO "*** Warning: Linking the executable $output against the loadable module" + else + $ECHO "*** Warning: Linking the shared library $output against the loadable module" + fi + $ECHO "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) func_append compile_rpath " $absdir" ;; + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + shift + realname="$1" + shift + libname=`eval "\\$ECHO \"$libname_spec\""` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw* | *cegcc*) + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + func_basename "$soroot" + soname="$func_basename_result" + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + func_verbose "extracting exported symbol list from \`$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + func_verbose "generating import library for \`$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$opt_mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a (non-dlopened) module then we can not + # link against it, someone is ignoring the earlier warnings + if /usr/bin/file -L $add 2> /dev/null | + $GREP ": [^:]* bundle" >/dev/null ; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + echo + echo "*** And there doesn't seem to be a static archive available" + echo "*** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + elif test -n "$old_library"; then + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$absdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + func_fatal_configuration "unsupported hardcode properties" + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) func_append compile_shlibpath "$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && + test "$hardcode_minus_L" != yes && + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$opt_mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) func_append finalize_shlibpath "$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + func_append add_dir " -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + echo + $ECHO "*** Warning: This system can not link to static lib archive $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) func_append xrpath " $temp_xrpath";; + esac;; + *) func_append temp_deplibs " $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + func_append newlib_search_path " $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result";; + *) func_resolve_sysroot "$deplib" ;; + esac + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $func_resolve_sysroot_result "*) + func_append specialdeplibs " $func_resolve_sysroot_result" ;; + esac + fi + func_append tmp_libs " $func_resolve_sysroot_result" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + path= + case $deplib in + -L*) path="$deplib" ;; + *.la) + func_resolve_sysroot "$deplib" + deplib=$func_resolve_sysroot_result + func_dirname "$deplib" "" "." + dir=$func_dirname_result + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + func_warning "cannot determine absolute directory name of \`$dir'" + absdir="$dir" + fi + ;; + esac + if $GREP "^installed=no" $deplib > /dev/null; then + case $host in + *-*-darwin*) + depdepl= + eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$absdir/$objdir/$depdepl" ; then + depdepl="$absdir/$objdir/$depdepl" + darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" + path= + fi + fi + ;; + *) + path="-L$absdir/$objdir" + ;; + esac + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" + fi + ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test "$pass" = link; then + if test "$linkmode" = "prog"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) func_append lib_search_path " $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) func_append tmp_libs " $deplib" ;; + esac + ;; + *) func_append tmp_libs " $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + func_append tmp_libs " $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + fi + if test "$linkmode" = prog || test "$linkmode" = lib; then + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for archives" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for archives" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for archives" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for archives" + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for archives" + + test -n "$release" && \ + func_warning "\`-release' is ignored for archives" + + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "\`-export-symbols' is ignored for archives" + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + func_append objs "$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + test "$module" = no && \ + func_fatal_help "libtool library \`$output' must begin with \`lib'" + + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + func_stripname '' '.la' "$outputname" + name=$func_stripname_result + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" + else + echo + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" + func_append libobjs " $objs" + fi + fi + + test "$dlself" != no && \ + func_warning "\`-dlopen self' is ignored for libtool libraries" + + set dummy $rpath + shift + test "$#" -gt 1 && \ + func_warning "ignoring multiple \`-rpath's for a libtool library" + + install_libdir="$1" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for convenience libraries" + + test -n "$release" && \ + func_warning "\`-release' is ignored for convenience libraries" + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + shift + IFS="$save_ifs" + + test -n "$7" && \ + func_fatal_help "too many parameters to \`-version-info'" + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$1" + number_minor="$2" + number_revision="$3" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + # correct linux to gnu/linux during the next big refactor + darwin|linux|osf|windows|none) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|qnx|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + func_arith $number_major + $number_minor + current=$func_arith_result + age="$number_minor" + revision="$number_minor" + lt_irix_increment=no + ;; + *) + func_fatal_configuration "$modename: unknown library version type \`$version_type'" + ;; + esac + ;; + no) + current="$1" + revision="$2" + age="$3" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "CURRENT \`$current' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "REVISION \`$revision' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + func_error "AGE \`$age' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" + ;; + esac + + if test "$age" -gt "$current"; then + func_error "AGE \`$age' is greater than the current interface number \`$current'" + func_fatal_error "\`$vinfo' is not valid version information" + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + func_arith $current + 1 + minor_current=$func_arith_result + xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current" + ;; + + irix | nonstopux) + if test "X$lt_irix_increment" = "Xno"; then + func_arith $current - $age + else + func_arith $current - $age + 1 + fi + major=$func_arith_result + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) # correct to gnu/linux during the next big refactor + func_arith $current - $age + major=.$func_arith_result + versuffix="$major.$age.$revision" + ;; + + osf) + func_arith $current - $age + major=.$func_arith_result + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + func_append verstring ":${current}.0" + ;; + + qnx) + major=".$current" + versuffix=".$current" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + func_arith $current - $age + major=$func_arith_result + versuffix="-$major" + ;; + + *) + func_fatal_configuration "unknown library version type \`$version_type'" + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + func_warning "undefined symbols not allowed in $host shared libraries" + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + + fi + + func_generate_dlsyms "$libname" "$libname" "yes" + func_append libobjs " $symfileobj" + test "X$libobjs" = "X " && libobjs= + + if test "$opt_mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$ECHO "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext | *.gcno) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + func_append removelist " $p" + ;; + *) ;; + esac + done + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + func_append oldlibs " $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + #for path in $notinst_path; do + # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` + # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` + # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` + #done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + func_replace_sysroot "$libdir" + func_append temp_xrpath " -R$func_replace_sysroot_result" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) func_append dlfiles " $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) func_append dlprefiles " $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + func_append deplibs " System.ltframework" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + func_append deplibs " -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $opt_dry_run || $RM conftest.c + cat > conftest.c </dev/null` + $nocaseglob + else + potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` + fi + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + for a_deplib in $deplibs; do + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + func_append newdeplibs " $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval "\\$ECHO \"$libname_spec\""` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" + fi + fi + ;; + *) + # Add a -L argument. + func_append newdeplibs " $a_deplib" + ;; + esac + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` + done + fi + case $tmp_deplibs in + *[!\ \ ]*) + echo + if test "X$deplibs_check_method" = "Xnone"; then + echo "*** Warning: inter-library dependencies are not supported in this platform." + else + echo "*** Warning: inter-library dependencies are not known to be supported." + fi + echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + ;; + esac + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + deplibs="$new_libs" + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + # Remove ${wl} instances when linking with ld. + # FIXME: should test the right _cmds variable. + case $archive_cmds in + *\$LD\ *) wl= ;; + esac + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$opt_mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + func_replace_sysroot "$libdir" + libdir=$func_replace_sysroot_result + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append dep_rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + shift + realname="$1" + shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + linknames= + for link + do + func_append linknames " $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= + + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" + func_append delfiles " $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols="$export_symbols" + export_symbols= + always_export_symbols=yes + fi + fi + ;; + esac + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd1 in $cmds; do + IFS="$save_ifs" + # Take the normal branch if the nm_file_list_spec branch + # doesn't work or if tool conversion is not needed. + case $nm_file_list_spec~$to_tool_file_cmd in + *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) + try_normal_branch=yes + eval cmd=\"$cmd1\" + func_len " $cmd" + len=$func_len_result + ;; + *) + try_normal_branch=no + ;; + esac + if test "$try_normal_branch" = yes \ + && { test "$len" -lt "$max_cmd_len" \ + || test "$max_cmd_len" -le -1; } + then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + elif test -n "$nm_file_list_spec"; then + func_basename "$output" + output_la=$func_basename_result + save_libobjs=$libobjs + save_output=$output + output=${output_objdir}/${output_la}.nm + func_to_tool_file "$output" + libobjs=$nm_file_list_spec$func_to_tool_file_result + func_append delfiles " $output" + func_verbose "creating $NM input file list: $output" + for obj in $save_libobjs; do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > "$output" + eval cmd=\"$cmd1\" + func_show_eval "$cmd" 'exit $?' + output=$save_output + libobjs=$save_libobjs + skipped_export=false + else + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + func_append tmp_deplibs " $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test "$compiler_needs_object" = yes && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + else + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + func_append linker_flags " $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + func_basename "$output" + output_la=$func_basename_result + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + last_robj= + k=1 + + if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then + output=${output_objdir}/${output_la}.lnkscript + func_verbose "creating GNU ld script: $output" + echo 'INPUT (' > $output + for obj in $save_libobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + echo ')' >> $output + func_append delfiles " $output" + func_to_tool_file "$output" + output=$func_to_tool_file_result + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test "$compiler_needs_object" = yes; then + firstobj="$1 " + shift + fi + for obj + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + func_append delfiles " $output" + func_to_tool_file "$output" + output=$firstobj\"$file_list_spec$func_to_tool_file_result\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test "X$objlist" = X || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + reload_objs=$objlist + eval concat_cmds=\"$reload_cmds\" + else + # All subsequent reloadable object files will link in + # the last one created. + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-${k}.$objext + objlist=" $obj" + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi + func_append delfiles " $output" + + else + output= + fi + + if ${skipped_export-false}; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" + fi + fi + + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + + if ${skipped_export-false}; then + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + fi + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + fi + + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" + fi + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + func_show_eval '${RM}r "$gentop"' + fi + fi + + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for objects" + fi + + case " $deplibs" in + *\ -l* | *\ -L*) + func_warning "\`-l' and \`-L' are ignored for objects" ;; + esac + + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for objects" + + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for objects" + + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for objects" + + test -n "$release" && \ + func_warning "\`-release' is ignored for objects" + + case $output in + *.lo) + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object \`$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $opt_dry_run || $RM $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec and hope we can get by with + # turning comma into space.. + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" + reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` + else + gentop="$output_objdir/${obj}x" + func_append generated " $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + + # If we're not building shared, we need to use non_pic_objs + test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + func_execute_cmds "$reload_cmds" 'exit $?' + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + func_execute_cmds "$reload_cmds" 'exit $?' + fi + + if test -n "$gentop"; then + func_show_eval '${RM}r "$gentop"' + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; + esac + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for programs" + + test -n "$release" && \ + func_warning "\`-release' is ignored for programs" + + test "$preload" = yes \ + && test "$dlopen_support" = unknown \ + && test "$dlopen_self" = unknown \ + && test "$dlopen_self_static" = unknown && \ + func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` + ;; + esac + + case $host in + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + func_append compile_command " ${wl}-bind_at_load" + func_append finalize_command " ${wl}-bind_at_load" + ;; + esac + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + func_append new_libs " -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) func_append new_libs " $deplib" ;; + esac + ;; + *) func_append new_libs " $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + + func_append compile_command " $compile_deplibs" + func_append finalize_command " $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) func_append finalize_rpath " $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) func_append perm_rpath " $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + ::) dllsearchpath=$libdir;; + *) func_append dllsearchpath ":$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + func_append rpath " $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) func_append finalize_perm_rpath " $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + fi + + func_generate_dlsyms "$outputname" "@PROGRAM@" "no" + + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' + fi + + wrappers_required=yes + case $host in + *cegcc* | *mingw32ce*) + # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. + wrappers_required=no + ;; + *cygwin* | *mingw* ) + if test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + *) + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + esac + if test "$wrappers_required" = no; then + # Replace the output file specification. + compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Delete the generated files. + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' + fi + + exit $exit_status + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + func_append rpath "$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + func_append rpath "$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $opt_dry_run || $RM $output + # Link the executable and exit + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + func_warning "this platform does not like uninstalled shared libraries" + func_warning "\`$output' will be relinked during installation" + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output_objdir/$outputname" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + + # Now create the wrapper script. + func_verbose "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + fi + + # Only actually do things if not in dry run mode. + $opt_dry_run || { + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } + + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host" ; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } + ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 + + func_emit_wrapper no > $output + chmod +x $output + ;; + esac + } + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save $symfileobj" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then + func_append oldobjs " $symfileobj" + fi + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $addlibs + func_append oldobjs " $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append oldobjs " $func_extract_archives_result" + fi + + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + func_basename "$obj" + $ECHO "$func_basename_result" + done | sort | sort -uc >/dev/null 2>&1); then + : + else + echo "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + func_mkdir_p "$gentop" + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + func_basename "$obj" + objbase="$func_basename_result" + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + func_arith $counter + 1 + counter=$func_arith_result + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + func_append oldobjs " $gentop/$newobj" + ;; + *) func_append oldobjs " $obj" ;; + esac + done + fi + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + eval cmds=\"$old_archive_cmds\" + + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + elif test -n "$archiver_list_spec"; then + func_verbose "using command file archive linking..." + for obj in $oldobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > $output_objdir/$libname.libcmd + func_to_tool_file "$output_objdir/$libname.libcmd" + oldobjs=" $archiver_list_spec$func_to_tool_file_result" + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + func_verbose "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + oldobjs= + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + for obj in $save_oldobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + len=$len0 + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + func_execute_cmds "$cmds" 'exit $?' + done + + test -n "$generated" && \ + func_show_eval "${RM}r$generated" + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + func_verbose "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + + # Only create the output if not a dry run. + $opt_dry_run || { + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + func_basename "$deplib" + name="$func_basename_result" + func_resolve_sysroot "$deplib" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" + ;; + -L*) + func_stripname -L '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -L$func_replace_sysroot_result" + ;; + -R*) + func_stripname -R '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -R$func_replace_sysroot_result" + ;; + *) func_append newdependency_libs " $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + + for lib in $dlfiles; do + case $lib in + *.la) + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" + ;; + *) func_append newdlfiles " $lib" ;; + esac + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" + ;; + esac + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlfiles " $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + func_append newdlprefiles " $abs" + done + dlprefiles="$newdlprefiles" + fi + $RM $output + # place dlname in correct position for cygwin + # In fact, it would be nice if we could use this code for all target + # systems that can't hard-code library paths into their executables + # and that have no shared library path variable independent of PATH, + # but it turns out we can't easily determine that from inspecting + # libtool variables, so we have to hard-code the OSs to which it + # applies here; at the moment, that means platforms that use the PE + # object format with DLL files. See the long comment at the top of + # tests/bindir.at for full details. + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) + # If a -bindir argument was supplied, place the dll there. + if test "x$bindir" != x ; + then + func_relative_path "$install_libdir" "$bindir" + tdlname=$func_relative_path_result$dlname + else + # Otherwise fall back on heuristic. + tdlname=../bin/$dlname + fi + ;; + esac + $ECHO > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Linker flags that can not go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $ECHO >> $output "\ +relink_command=\"$relink_command\"" + fi + done + } + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' + ;; + esac + exit $EXIT_SUCCESS +} + +{ test "$opt_mode" = link || test "$opt_mode" = relink; } && + func_mode_link ${1+"$@"} + + +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $opt_debug + RM="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) func_append RM " $arg"; rmforce=yes ;; + -*) func_append RM " $arg" ;; + *) func_append files " $arg" ;; + esac + done + + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" + + rmdirs= + + for file in $files; do + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then + odir="$objdir" + else + odir="$dir/$objdir" + fi + func_basename "$file" + name="$func_basename_result" + test "$opt_mode" = uninstall && odir="$dir" + + # Remember odir for removal later, being careful to avoid duplicates + if test "$opt_mode" = clean; then + case " $rmdirs " in + *" $odir "*) ;; + *) func_append rmdirs " $odir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if func_lalib_p "$file"; then + func_source $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + func_append rmfiles " $odir/$n" + done + test -n "$old_library" && func_append rmfiles " $odir/$old_library" + + case "$opt_mode" in + clean) + case " $library_names " in + *" $dlname "*) ;; + *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; + esac + test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' + fi + # FIXME: should reinstall the best remaining shared library. + ;; + esac + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if func_lalib_p "$file"; then + + # Read the .lo file + func_source $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" && + test "$pic_object" != none; then + func_append rmfiles " $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then + func_append rmfiles " $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$opt_mode" = clean ; then + noexename=$name + case $file in + *.exe) + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result + # $file with .exe has already been added to rmfiles, + # add $file without .exe + func_append rmfiles " $file" + ;; + esac + # Do a test to see if this is a libtool program. + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + func_append rmfiles " $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + func_append rmfiles " $odir/$name $odir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + func_append rmfiles " $odir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + func_append rmfiles " $odir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + func_show_eval "$RM $rmfiles" 'exit_status=1' + done + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + func_show_eval "rmdir $dir >/dev/null 2>&1" + fi + done + + exit $exit_status +} + +{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && + func_mode_uninstall ${1+"$@"} + +test -z "$opt_mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode \`$opt_mode'" + +if test -n "$exec_cmd"; then + eval exec "$exec_cmd" + exit $EXIT_FAILURE +fi + +exit $exit_status + + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +build_libtool_libs=no +build_old_libs=yes +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: +# vi:sw=2 + diff --git a/build-aux/missing b/build-aux/missing new file mode 100755 index 0000000..86a8fc3 --- /dev/null +++ b/build-aux/missing @@ -0,0 +1,331 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. + +scriptversion=2012-01-06.13; # UTC + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc. +# Originally by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case $1 in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +\`g' are ignored when checking the name. + +Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + +esac + +# normalize program name to check for. +program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). This is about non-GNU programs, so use $1 not +# $program. +case $1 in + lex*|yacc*) + # Not GNU programs, they don't have --version. + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case $program in + aclocal*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case $f in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te*) + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison*|yacc*) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if test $# -ne 1; then + eval LASTARG=\${$#} + case $LASTARG in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if test ! -f y.tab.h; then + echo >y.tab.h + fi + if test ! -f y.tab.c; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex*|flex*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if test $# -ne 1; then + eval LASTARG=\${$#} + case $LASTARG in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if test ! -f lex.yy.c; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit $? + fi + ;; + + makeinfo*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -z "$file"; then + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + fi + # If the file does not exist, the user really needs makeinfo; + # let's fail without touching anything. + test -f $file || exit 1 + touch $file + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/config.h.in b/config.h.in new file mode 100644 index 0000000..31d1427 --- /dev/null +++ b/config.h.in @@ -0,0 +1,80 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* Define to 1 if you have the header file. */ +#undef HAVE_DLFCN_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_INTTYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_LINUX_DCCP_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_LINUX_IP_VS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_LINUX_MAGIC_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_LINUX_PROC_FS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_UNISTD_H + +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#undef LT_OBJDIR + +/* Define to 1 if your C compiler doesn't accept -c and -o together. */ +#undef NO_MINUS_C_MINUS_O + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* The size of `struct ip6_hdr', as computed by sizeof. */ +#undef SIZEOF_STRUCT_IP6_HDR + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Version number of package */ +#undef VERSION diff --git a/configure b/configure new file mode 100755 index 0000000..dd37099 --- /dev/null +++ b/configure @@ -0,0 +1,14541 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for iptables 1.4.14. +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 + + test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ + || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, +$0: including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + +SHELL=${CONFIG_SHELL-/bin/sh} + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='iptables' +PACKAGE_TARNAME='iptables' +PACKAGE_VERSION='1.4.14' +PACKAGE_STRING='iptables 1.4.14' +PACKAGE_BUGREPORT='' +PACKAGE_URL='' + +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIBOBJS +libxtables_vmajor +libxtables_vage +libxtables_vcurrent +pkgdatadir +pkgconfigdir +xtlibdir +ksourcedir +kbuilddir +kinclude_CPPFLAGS +noundef_LDFLAGS +regular_CPPFLAGS +regular_CFLAGS +HAVE_LIBNFNETLINK_FALSE +HAVE_LIBNFNETLINK_TRUE +libnfnetlink_LIBS +libnfnetlink_CFLAGS +PKG_CONFIG_LIBDIR +PKG_CONFIG_PATH +PKG_CONFIG +ENABLE_LIBIPQ_FALSE +ENABLE_LIBIPQ_TRUE +ENABLE_DEVEL_FALSE +ENABLE_DEVEL_TRUE +ENABLE_LARGEFILE_FALSE +ENABLE_LARGEFILE_TRUE +ENABLE_IPV6_FALSE +ENABLE_IPV6_TRUE +ENABLE_IPV4_FALSE +ENABLE_IPV4_TRUE +ENABLE_SHARED_FALSE +ENABLE_SHARED_TRUE +ENABLE_STATIC_FALSE +ENABLE_STATIC_TRUE +blacklist_modules +libiptc_LDFLAGS2 +CPP +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +MANIFEST_TOOL +RANLIB +ac_ct_AR +AR +DLLTOOL +OBJDUMP +LN_S +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP +EGREP +GREP +SED +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +LIBTOOL +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_dependency_tracking +enable_static +enable_shared +with_pic +enable_fast_install +with_gnu_ld +with_sysroot +enable_libtool_lock +with_kernel +with_kbuild +with_ksource +with_xtlibdir +enable_ipv4 +enable_ipv6 +enable_largefile +enable_devel +enable_libipq +with_pkgconfigdir +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP +PKG_CONFIG +PKG_CONFIG_PATH +PKG_CONFIG_LIBDIR +libnfnetlink_CFLAGS +libnfnetlink_LIBS' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures iptables 1.4.14 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/iptables] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of iptables 1.4.14:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors + --enable-static[=PKGS] build static libraries [default=no] + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) + --disable-ipv4 Do not build iptables + --disable-ipv6 Do not build ip6tables + --disable-largefile Do not build largefile support + --enable-devel Install Xtables development headers + --enable-libipq Build and install libipq + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use + both] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-sysroot=DIR Search for dependent libraries within DIR + (or the compiler's sysroot if not specified). + --with-kernel=PATH Path to kernel source/build directory + --with-kbuild=PATH Path to kernel build directory + [[/lib/modules/CURRENT/build]] + --with-ksource=PATH Path to kernel source directory + [[/lib/modules/CURRENT/source]] + --with-xtlibdir=PATH Path where to install Xtables extensions + [[LIBEXECDIR/xtables]] + --with-pkgconfigdir=PATH + Path to the pkgconfig directory [[LIBDIR/pkgconfig]] + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CPP C preprocessor + PKG_CONFIG path to pkg-config utility + PKG_CONFIG_PATH + directories to add to pkg-config's search path + PKG_CONFIG_LIBDIR + path overriding pkg-config's built-in search path + libnfnetlink_CFLAGS + C compiler flags for libnfnetlink, overriding pkg-config + libnfnetlink_LIBS + linker flags for libnfnetlink, overriding pkg-config + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to the package provider. +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +iptables configure 1.4.14 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_mongrel + +# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES +# -------------------------------------------- +# Tries to find the compile-time value of EXPR in a program that includes +# INCLUDES, setting VAR accordingly. Returns whether the value could be +# computed +ac_fn_c_compute_int () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) >= 0)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_lo=0 ac_mid=0 + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) <= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_hi=$ac_mid; break +else + as_fn_arith $ac_mid + 1 && ac_lo=$as_val + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) < 0)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_hi=-1 ac_mid=-1 + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) >= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_lo=$ac_mid; break +else + as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + ac_lo= ac_hi= +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) <= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_hi=$ac_mid +else + as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in #(( +?*) eval "$3=\$ac_lo"; ac_retval=0 ;; +'') ac_retval=1 ;; +esac + else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +static long int longval () { return $2; } +static unsigned long int ulongval () { return $2; } +#include +#include +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + return 1; + if (($2) < 0) + { + long int i = longval (); + if (i != ($2)) + return 1; + fprintf (f, "%ld", i); + } + else + { + unsigned long int i = ulongval (); + if (i != ($2)) + return 1; + fprintf (f, "%lu", i); + } + /* Do not output a trailing newline, as this causes \r\n confusion + on some platforms. */ + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + echo >>conftest.val; read $3 config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by iptables $as_me 1.4.14, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +# See libtool.info "Libtool's versioning system" +libxtables_vcurrent=7 +libxtables_vage=0 + +ac_aux_dir= +for ac_dir in build-aux "$srcdir"/build-aux; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in build-aux \"$srcdir\"/build-aux" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +ac_config_headers="$ac_config_headers config.h" + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +am__api_version='1.11' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Just in case +sleep 1 +echo timestamp > conftest.file +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; +esac + +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken +alias in your environment" "$LINENO" 5 + fi + + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='iptables' + VERSION='1.4.14' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' + +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from `make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok `-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + +if test "x$CC" != xcc; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5 +$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5 +$as_echo_n "checking whether cc understands -c and -o together... " >&6; } +fi +set dummy $CC; ac_cc=`$as_echo "$2" | + sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` +if eval \${ac_cv_prog_cc_${ac_cc}_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +# Make sure it works both with $CC and with simple cc. +# We do the test twice because some compilers refuse to overwrite an +# existing .o file with -o, though they will create one. +ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' +rm -f conftest2.* +if { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && + test -f conftest2.$ac_objext && { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; +then + eval ac_cv_prog_cc_${ac_cc}_c_o=yes + if test "x$CC" != xcc; then + # Test first that cc exists at all. + if { ac_try='cc -c conftest.$ac_ext >&5' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' + rm -f conftest2.* + if { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && + test -f conftest2.$ac_objext && { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; + then + # cc works too. + : + else + # cc exists but doesn't like -o. + eval ac_cv_prog_cc_${ac_cc}_c_o=no + fi + fi + fi +else + eval ac_cv_prog_cc_${ac_cc}_c_o=no +fi +rm -f core conftest* + +fi +if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h + +fi + +# FIXME: we rely on the cache variable name because +# there is no other way. +set dummy $CC +am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` +eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o +if test "$am_t" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi + + +# Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_static=no +fi + + + + + + + + + +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.4.2' +macro_revision='1.3337' + + + + + + + + + + + + + +ltmain="$ac_aux_dir/ltmain.sh" + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} + +case "$ECHO" in + printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +$as_echo "cat" >&6; } ;; +esac + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if ${ac_cv_path_SED+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if ${ac_cv_path_FGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_FGREP" || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if ${lt_cv_path_LD+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if ${lt_cv_prog_gnu_ld+:} false; then : + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if ${lt_cv_path_NM+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + if test -n "$ac_tool_prefix"; then + for ac_prog in dumpbin "link -dump" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in dumpbin "link -dump" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_DUMPBIN" && break +done + + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi + + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac + fi + + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if ${lt_cv_nm_interface+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi + +# find the maximum length of command line arguments +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if ${lt_cv_sys_max_cmd_len+:} false; then : + $as_echo_n "(cached) " >&6 +else + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + +fi + +if test -n $lt_cv_sys_max_cmd_len ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + + + + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 +$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 +$as_echo "$xsi_shell" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 +$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } +lt_shell_append=no +( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 +$as_echo "$lt_shell_append" >&6; } + + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 +$as_echo_n "checking how to convert $build file names to $host format... " >&6; } +if ${lt_cv_to_host_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac + +fi + +to_host_file_cmd=$lt_cv_to_host_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 +$as_echo "$lt_cv_to_host_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 +$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } +if ${lt_cv_to_tool_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + #assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac + +fi + +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 +$as_echo "$lt_cv_to_tool_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if ${lt_cv_ld_reload_flag+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + if test "$GCC" != yes; then + reload_cmds=false + fi + ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if ${lt_cv_deplibs_check_method+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. + if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + + + + + + + + + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 +$as_echo_n "checking how to associate runtime and link libraries... " >&6; } +if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh + # decide which to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd="$ECHO" + ;; +esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 +$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + + + + + + + + +if test -n "$ac_tool_prefix"; then + for ac_prog in ar + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AR" && break + done +fi +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_AR" && break +done + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +fi + +: ${AR=ar} +: ${AR_FLAGS=cru} + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 +$as_echo_n "checking for archiver @FILE support... " >&6; } +if ${lt_cv_ar_at_file+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ar_at_file=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -eq 0; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -ne 0; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 +$as_echo "$lt_cv_ar_at_file" >&6; } + +if test "x$lt_cv_ar_at_file" = xno; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +test -z "$RANLIB" && RANLIB=: + + + + + + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if ${lt_cv_sys_global_symbol_pipe+:} false; then : + $as_echo_n "(cached) " >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDEGRST]' + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 +$as_echo "failed" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +$as_echo "ok" >&6; } +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 +$as_echo_n "checking for sysroot... " >&6; } + +# Check whether --with-sysroot was given. +if test "${with_sysroot+set}" = set; then : + withval=$with_sysroot; +else + with_sysroot=no +fi + + +lt_sysroot= +case ${with_sysroot} in #( + yes) + if test "$GCC" = yes; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 +$as_echo "${with_sysroot}" >&6; } + as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 + ;; +esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 +$as_echo "${lt_sysroot:-no}" >&6; } + + + + + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if ${lt_cv_cc_needs_belf+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +else + lt_cv_cc_needs_belf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD="${LD-ld}_sol2" + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. +set dummy ${ac_tool_prefix}mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$MANIFEST_TOOL"; then + ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL +if test -n "$MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 +$as_echo "$MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_MANIFEST_TOOL"; then + ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL + # Extract the first word of "mt", so it can be a program name with args. +set dummy mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_MANIFEST_TOOL"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL +if test -n "$ac_ct_MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 +$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_MANIFEST_TOOL" = x; then + MANIFEST_TOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL + fi +else + MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" +fi + +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 +$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } +if ${lt_cv_path_mainfest_tool+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&5 + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 +$as_echo "$lt_cv_path_mainfest_tool" >&6; } +if test "x$lt_cv_path_mainfest_tool" != xyes; then + MANIFEST_TOOL=: +fi + + + + + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_LIPO+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi +else + OTOOL="$ac_cv_prog_OTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if ${lt_cv_apple_cc_single_mod+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&5 + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test $_lt_result -eq 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if ${lt_cv_ld_exported_symbols_list+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_ld_exported_symbols_list=yes +else + lt_cv_ld_exported_symbols_list=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 +$as_echo_n "checking for -force_load linker flag... " >&6; } +if ${lt_cv_ld_force_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 + echo "$RANLIB libconftest.a" >&5 + $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&5 + elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&5 + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 +$as_echo "$lt_cv_ld_force_load" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_header in dlfcn.h +do : + ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLFCN_H 1 +_ACEOF + +fi + +done + + + + + +# Set options + + + + enable_dlopen=no + + + enable_win32_dll=no + + + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_shared=yes +fi + + + + + + + + + + + +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then : + withval=$with_pic; lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for lt_pkg in $withval; do + IFS="$lt_save_ifs" + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + pic_mode=default +fi + + +test -z "$pic_mode" && pic_mode=default + + + + + + + + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_fast_install=yes +fi + + + + + + + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +test -z "$LN_S" && LN_S="ln -s" + + + + + + + + + + + + + + +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if ${lt_cv_objdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` + + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Use C for the default configuration in the libtool script + +lt_save_CC="$CC" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + +lt_prog_compiler_no_builtin_flag= + +if test "$GCC" = yes; then + case $cc_basename in + nvcc*) + lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; + *) + lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; + esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + + + + + + + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + if test -n "$lt_prog_compiler_pic"; then + lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ F* | *Sun*Fortran*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Intel*\ [CF]*Compiler*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + *Portland\ Group*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic=$lt_prog_compiler_pic +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 +$as_echo "$lt_cv_prog_compiler_pic" >&6; } +lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if ${lt_cv_prog_compiler_pic_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + +if test x"$lt_cv_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi + + + + + + + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if ${lt_cv_prog_compiler_static_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + +if test x"$lt_cv_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + linux* | k*bsd*-gnu | gnu*) + link_all_deplibs=no + ;; + esac + + ld_shlibs=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + export_dynamic_flag_spec='${wl}--export-all-symbols' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + haiku*) + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + link_all_deplibs=yes + ;; + + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; + + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + link_all_deplibs=no + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + export_dynamic_flag_spec='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_="/usr/lib:/lib" + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_="/usr/lib:/lib" + fi + +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + fi + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + always_export_symbols=yes + file_list_spec='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, )='true' + enable_shared_with_static_runtimes=yes + exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + old_postinstall_cmds='chmod 644 $oldlib' + postlink_cmds='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + enable_shared_with_static_runtimes=yes + ;; + esac + ;; + + darwin* | rhapsody*) + + + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + + else + whole_archive_flag_spec='' + fi + link_all_deplibs=yes + allow_undefined_flag="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + + else + ld_shlibs=no + fi + + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 +$as_echo_n "checking if $CC understands -b... " >&6; } +if ${lt_cv_prog_compiler__b+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler__b=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -b" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler__b=yes + fi + else + lt_cv_prog_compiler__b=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 +$as_echo "$lt_cv_prog_compiler__b" >&6; } + +if test x"$lt_cv_prog_compiler__b" = xyes; then + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +fi + + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 +$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } +if ${lt_cv_irix_exported_symbol+:} false; then : + $as_echo_n "(cached) " >&6 +else + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo (void) { return 0; } +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_irix_exported_symbol=yes +else + lt_cv_irix_exported_symbol=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 +$as_echo "$lt_cv_irix_exported_symbol" >&6; } + if test "$lt_cv_irix_exported_symbol" = yes; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: + ;; + + solaris*) + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='${wl}-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='${wl}-z,text' + allow_undefined_flag='${wl}-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='${wl}-Blargedynsym' + ;; + esac + fi + fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test "$ld_shlibs" = no && can_build_shared=no + +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } +if ${lt_cv_archive_cmds_need_lc+:} false; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + ;; + esac + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([A-Za-z]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[4-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[23].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[3-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test "X$hardcode_automatic" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } + +if test "$hardcode_action" = relink || + test "$inherit_rpath" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + + + + + + if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + *) + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = xyes; then : + lt_cv_dlopen="shl_load" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if ${ac_cv_lib_dld_shl_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_shl_load=yes +else + ac_cv_lib_dld_shl_load=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +else + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if ${ac_cv_lib_dl_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dl_dlopen=yes +else + ac_cv_lib_dl_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if ${ac_cv_lib_svld_dlopen+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_svld_dlopen=yes +else + ac_cv_lib_svld_dlopen=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = xyes; then : + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if ${ac_cv_lib_dld_dld_link+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_dld_dld_link=yes +else + ac_cv_lib_dld_dld_link=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = xyes; then : + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if ${lt_cv_dlopen_self_static+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + + + + + + + + + + + + + + + + +striplib= +old_striplib= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi + + + + + + + + + + + + + # Report which library types will actually be built + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + + + + +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + + + + + + + + + + + + + + + ac_config_commands="$ac_config_commands libtool" + + + + +# Only expand once: + + + + +# Check whether --with-kernel was given. +if test "${with_kernel+set}" = set; then : + withval=$with_kernel; kbuilddir="$withval"; ksourcedir="$withval"; +fi + + +# Check whether --with-kbuild was given. +if test "${with_kbuild+set}" = set; then : + withval=$with_kbuild; kbuilddir="$withval" +fi + + +# Check whether --with-ksource was given. +if test "${with_ksource+set}" = set; then : + withval=$with_ksource; ksourcedir="$withval" +fi + + +# Check whether --with-xtlibdir was given. +if test "${with_xtlibdir+set}" = set; then : + withval=$with_xtlibdir; xtlibdir="$withval" +else + xtlibdir="${libdir}/xtables" +fi + +# Check whether --enable-ipv4 was given. +if test "${enable_ipv4+set}" = set; then : + enableval=$enable_ipv4; enable_ipv4="$enableval" +else + enable_ipv4="yes" +fi + +# Check whether --enable-ipv6 was given. +if test "${enable_ipv6+set}" = set; then : + enableval=$enable_ipv6; enable_ipv6="$enableval" +else + enable_ipv6="yes" +fi + +# Check whether --enable-largefile was given. +if test "${enable_largefile+set}" = set; then : + enableval=$enable_largefile; enable_largefile="$enableval" +else + enable_largefile="yes"; + largefile_cppflags='-D_LARGEFILE_SOURCE=1 -D_LARGE_FILES -D_FILE_OFFSET_BITS=64' +fi + +# Check whether --enable-devel was given. +if test "${enable_devel+set}" = set; then : + enableval=$enable_devel; enable_devel="$enableval" +else + enable_devel="yes" +fi + +# Check whether --enable-libipq was given. +if test "${enable_libipq+set}" = set; then : + enableval=$enable_libipq; +fi + + +# Check whether --with-pkgconfigdir was given. +if test "${with_pkgconfigdir+set}" = set; then : + withval=$with_pkgconfigdir; pkgconfigdir="$withval" +else + pkgconfigdir='${libdir}/pkgconfig' +fi + + +libiptc_LDFLAGS2=""; +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the linker accepts -Wl,--no-as-needed" >&5 +$as_echo_n "checking whether the linker accepts -Wl,--no-as-needed... " >&6; } +if ${ax_cv_linker_flags__Wl___no_as_needed+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ax_save_FLAGS=$LDFLAGS + LDFLAGS="-Wl,--no-as-needed" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ax_cv_linker_flags__Wl___no_as_needed=yes +else + ax_cv_linker_flags__Wl___no_as_needed=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$ax_save_FLAGS +fi + +eval ax_check_linker_flags=$ax_cv_linker_flags__Wl___no_as_needed +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_check_linker_flags" >&5 +$as_echo "$ax_check_linker_flags" >&6; } +if test "x$ax_check_linker_flags" = xyes; then + libiptc_LDFLAGS2="-Wl,--no-as-needed" +else + : +fi + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $LD knows -Wl,--no-undefined" >&5 +$as_echo_n "checking whether $LD knows -Wl,--no-undefined... " >&6; } +saved_LDFLAGS="$LDFLAGS"; +LDFLAGS="-Wl,--no-undefined"; +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int main(void) {} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + noundef_LDFLAGS="$LDFLAGS"; { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LDFLAGS="$saved_LDFLAGS"; + +blacklist_modules=""; + +for ac_header in linux/dccp.h linux/ip_vs.h linux/magic.h linux/proc_fs.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + +if test "$ac_cv_header_linux_dccp_h" != "yes"; then + blacklist_modules="$blacklist_modules dccp"; +fi; +if test "$ac_cv_header_linux_ip_vs_h" != "yes"; then + blacklist_modules="$blacklist_modules ipvs"; +fi; + + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of struct ip6_hdr" >&5 +$as_echo_n "checking size of struct ip6_hdr... " >&6; } +if ${ac_cv_sizeof_struct_ip6_hdr+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (struct ip6_hdr))" "ac_cv_sizeof_struct_ip6_hdr" "#include +"; then : + +else + if test "$ac_cv_type_struct_ip6_hdr" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (struct ip6_hdr) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_struct_ip6_hdr=0 + fi +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_struct_ip6_hdr" >&5 +$as_echo "$ac_cv_sizeof_struct_ip6_hdr" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_STRUCT_IP6_HDR $ac_cv_sizeof_struct_ip6_hdr +_ACEOF + + + + if test "$enable_static" = "yes"; then + ENABLE_STATIC_TRUE= + ENABLE_STATIC_FALSE='#' +else + ENABLE_STATIC_TRUE='#' + ENABLE_STATIC_FALSE= +fi + + if test "$enable_shared" = "yes"; then + ENABLE_SHARED_TRUE= + ENABLE_SHARED_FALSE='#' +else + ENABLE_SHARED_TRUE='#' + ENABLE_SHARED_FALSE= +fi + + if test "$enable_ipv4" = "yes"; then + ENABLE_IPV4_TRUE= + ENABLE_IPV4_FALSE='#' +else + ENABLE_IPV4_TRUE='#' + ENABLE_IPV4_FALSE= +fi + + if test "$enable_ipv6" = "yes"; then + ENABLE_IPV6_TRUE= + ENABLE_IPV6_FALSE='#' +else + ENABLE_IPV6_TRUE='#' + ENABLE_IPV6_FALSE= +fi + + if test "$enable_largefile" = "yes"; then + ENABLE_LARGEFILE_TRUE= + ENABLE_LARGEFILE_FALSE='#' +else + ENABLE_LARGEFILE_TRUE='#' + ENABLE_LARGEFILE_FALSE= +fi + + if test "$enable_devel" = "yes"; then + ENABLE_DEVEL_TRUE= + ENABLE_DEVEL_FALSE='#' +else + ENABLE_DEVEL_TRUE='#' + ENABLE_DEVEL_FALSE= +fi + + if test "$enable_libipq" = "yes"; then + ENABLE_LIBIPQ_TRUE= + ENABLE_LIBIPQ_FALSE='#' +else + ENABLE_LIBIPQ_TRUE='#' + ENABLE_LIBIPQ_FALSE= +fi + + + + + + + + + +if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. +set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +PKG_CONFIG=$ac_cv_path_PKG_CONFIG +if test -n "$PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 +$as_echo "$PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_path_PKG_CONFIG"; then + ac_pt_PKG_CONFIG=$PKG_CONFIG + # Extract the first word of "pkg-config", so it can be a program name with args. +set dummy pkg-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $ac_pt_PKG_CONFIG in + [\\/]* | ?:[\\/]*) + ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG +if test -n "$ac_pt_PKG_CONFIG"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 +$as_echo "$ac_pt_PKG_CONFIG" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_pt_PKG_CONFIG" = x; then + PKG_CONFIG="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + PKG_CONFIG=$ac_pt_PKG_CONFIG + fi +else + PKG_CONFIG="$ac_cv_path_PKG_CONFIG" +fi + +fi +if test -n "$PKG_CONFIG"; then + _pkg_min_version=0.9.0 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 +$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } + if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + PKG_CONFIG="" + fi +fi + +pkg_failed=no +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libnfnetlink" >&5 +$as_echo_n "checking for libnfnetlink... " >&6; } + +if test -n "$libnfnetlink_CFLAGS"; then + pkg_cv_libnfnetlink_CFLAGS="$libnfnetlink_CFLAGS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libnfnetlink >= 1.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libnfnetlink >= 1.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_libnfnetlink_CFLAGS=`$PKG_CONFIG --cflags "libnfnetlink >= 1.0" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi +if test -n "$libnfnetlink_LIBS"; then + pkg_cv_libnfnetlink_LIBS="$libnfnetlink_LIBS" + elif test -n "$PKG_CONFIG"; then + if test -n "$PKG_CONFIG" && \ + { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libnfnetlink >= 1.0\""; } >&5 + ($PKG_CONFIG --exists --print-errors "libnfnetlink >= 1.0") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + pkg_cv_libnfnetlink_LIBS=`$PKG_CONFIG --libs "libnfnetlink >= 1.0" 2>/dev/null` + test "x$?" != "x0" && pkg_failed=yes +else + pkg_failed=yes +fi + else + pkg_failed=untried +fi + + + +if test $pkg_failed = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + +if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then + _pkg_short_errors_supported=yes +else + _pkg_short_errors_supported=no +fi + if test $_pkg_short_errors_supported = yes; then + libnfnetlink_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libnfnetlink >= 1.0" 2>&1` + else + libnfnetlink_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libnfnetlink >= 1.0" 2>&1` + fi + # Put the nasty error message in config.log where it belongs + echo "$libnfnetlink_PKG_ERRORS" >&5 + + nfnetlink=0 +elif test $pkg_failed = untried; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + nfnetlink=0 +else + libnfnetlink_CFLAGS=$pkg_cv_libnfnetlink_CFLAGS + libnfnetlink_LIBS=$pkg_cv_libnfnetlink_LIBS + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + nfnetlink=1 +fi + if test "$nfnetlink" = 1; then + HAVE_LIBNFNETLINK_TRUE= + HAVE_LIBNFNETLINK_FALSE='#' +else + HAVE_LIBNFNETLINK_TRUE='#' + HAVE_LIBNFNETLINK_FALSE= +fi + + +regular_CFLAGS="-Wall -Waggregate-return -Wmissing-declarations \ + -Wmissing-prototypes -Wredundant-decls -Wshadow -Wstrict-prototypes \ + -Winline -pipe"; +regular_CPPFLAGS="${largefile_cppflags} -D_REENTRANT \ + -DXTABLES_LIBDIR=\\\"\${xtlibdir}\\\" -DXTABLES_INTERNAL"; +kinclude_CPPFLAGS=""; +if [ -n "$kbuilddir" ]; then + kinclude_CPPFLAGS="$kinclude_CPPFLAGS -I$kbuilddir/include"; +fi; +if [ -n "$ksourcedir" ]; then + kinclude_CPPFLAGS="$kinclude_CPPFLAGS -I$ksourcedir/include"; +fi; +pkgdatadir='${datadir}/xtables'; + + + + + + + + + + + + +libxtables_vmajor=$(($libxtables_vcurrent - $libxtables_vage)); + + +ac_config_files="$ac_config_files Makefile extensions/GNUmakefile include/Makefile iptables/Makefile iptables/xtables.pc libipq/Makefile libipq/libipq.pc libiptc/Makefile libiptc/libiptc.pc libiptc/libip4tc.pc libiptc/libip6tc.pc libxtables/Makefile utils/Makefile include/xtables.h include/iptables/internal.h" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${ENABLE_STATIC_TRUE}" && test -z "${ENABLE_STATIC_FALSE}"; then + as_fn_error $? "conditional \"ENABLE_STATIC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${ENABLE_SHARED_TRUE}" && test -z "${ENABLE_SHARED_FALSE}"; then + as_fn_error $? "conditional \"ENABLE_SHARED\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${ENABLE_IPV4_TRUE}" && test -z "${ENABLE_IPV4_FALSE}"; then + as_fn_error $? "conditional \"ENABLE_IPV4\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${ENABLE_IPV6_TRUE}" && test -z "${ENABLE_IPV6_FALSE}"; then + as_fn_error $? "conditional \"ENABLE_IPV6\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${ENABLE_LARGEFILE_TRUE}" && test -z "${ENABLE_LARGEFILE_FALSE}"; then + as_fn_error $? "conditional \"ENABLE_LARGEFILE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${ENABLE_DEVEL_TRUE}" && test -z "${ENABLE_DEVEL_FALSE}"; then + as_fn_error $? "conditional \"ENABLE_DEVEL\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${ENABLE_LIBIPQ_TRUE}" && test -z "${ENABLE_LIBIPQ_FALSE}"; then + as_fn_error $? "conditional \"ENABLE_LIBIPQ\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${HAVE_LIBNFNETLINK_TRUE}" && test -z "${HAVE_LIBNFNETLINK_FALSE}"; then + as_fn_error $? "conditional \"HAVE_LIBNFNETLINK\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by iptables $as_me 1.4.14, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to the package provider." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +iptables config.status 1.4.14 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' +macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' +macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' +enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' +pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' +ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' +PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' +host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' +host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' +host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' +build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' +build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' +build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' +SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' +Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' +GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' +EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' +FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' +LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' +NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' +LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' +ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' +exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' +lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' +lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' +lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' +reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' +file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' +want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' +DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' +sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' +AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' +archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' +STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' +RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' +lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' +CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' +compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' +GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' +lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' +objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' +need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' +MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' +LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' +libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' +module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' +postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' +version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' +runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' +libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' +soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' +install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' +finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' +sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' +old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' +striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in SHELL \ +ECHO \ +PATH_SEPARATOR \ +SED \ +GREP \ +EGREP \ +FGREP \ +LD \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +OBJDUMP \ +deplibs_check_method \ +file_magic_cmd \ +file_magic_glob \ +want_nocaseglob \ +DLLTOOL \ +sharedlib_from_linklib_cmd \ +AR \ +AR_FLAGS \ +archiver_list_spec \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +nm_file_list_spec \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_pic \ +lt_prog_compiler_wl \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +MANIFEST_TOOL \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_separator \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +install_override_mode \ +finish_eval \ +old_striplib \ +striplib; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postlink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +sys_lib_dlsearch_path_spec; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +ac_aux_dir='$ac_aux_dir' +xsi_shell='$xsi_shell' +lt_shell_append='$lt_shell_append' + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + + + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile' + + + + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "extensions/GNUmakefile") CONFIG_FILES="$CONFIG_FILES extensions/GNUmakefile" ;; + "include/Makefile") CONFIG_FILES="$CONFIG_FILES include/Makefile" ;; + "iptables/Makefile") CONFIG_FILES="$CONFIG_FILES iptables/Makefile" ;; + "iptables/xtables.pc") CONFIG_FILES="$CONFIG_FILES iptables/xtables.pc" ;; + "libipq/Makefile") CONFIG_FILES="$CONFIG_FILES libipq/Makefile" ;; + "libipq/libipq.pc") CONFIG_FILES="$CONFIG_FILES libipq/libipq.pc" ;; + "libiptc/Makefile") CONFIG_FILES="$CONFIG_FILES libiptc/Makefile" ;; + "libiptc/libiptc.pc") CONFIG_FILES="$CONFIG_FILES libiptc/libiptc.pc" ;; + "libiptc/libip4tc.pc") CONFIG_FILES="$CONFIG_FILES libiptc/libip4tc.pc" ;; + "libiptc/libip6tc.pc") CONFIG_FILES="$CONFIG_FILES libiptc/libip6tc.pc" ;; + "libxtables/Makefile") CONFIG_FILES="$CONFIG_FILES libxtables/Makefile" ;; + "utils/Makefile") CONFIG_FILES="$CONFIG_FILES utils/Makefile" ;; + "include/xtables.h") CONFIG_FILES="$CONFIG_FILES include/xtables.h" ;; + "include/iptables/internal.h") CONFIG_FILES="$CONFIG_FILES include/iptables/internal.h" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + "libtool":C) + + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + +# The names of the tagged configurations supported by this script. +available_tags="" + +# ### BEGIN LIBTOOL CONFIG + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# What type of objects to build. +pic_mode=$pic_mode + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that protects backslashes. +ECHO=$lt_ECHO + +# The PATH separator for the build system. +PATH_SEPARATOR=$lt_PATH_SEPARATOR + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" + +# A grep program that handles long lines. +GREP=$lt_GREP + +# An ERE matcher. +EGREP=$lt_EGREP + +# A literal string matcher. +FGREP=$lt_FGREP + +# A BSD- or MS-compatible name lister. +NM=$lt_NM + +# Whether we need soft or hard links. +LN_S=$lt_LN_S + +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len + +# Object file suffix (normally "o"). +objext=$ac_objext + +# Executable file suffix (normally ""). +exeext=$exeext + +# whether the shell understands "unset". +lt_unset=$lt_unset + +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL + +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP + +# convert \$build file names to \$host format. +to_host_file_cmd=$lt_cv_to_host_file_cmd + +# convert \$build files to toolchain format. +to_tool_file_cmd=$lt_cv_to_tool_file_cmd + +# An object symbol dumper. +OBJDUMP=$lt_OBJDUMP + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method = "file_magic". +file_magic_cmd=$lt_file_magic_cmd + +# How to find potential files when deplibs_check_method = "file_magic". +file_magic_glob=$lt_file_magic_glob + +# Find potential files using nocaseglob when deplibs_check_method = "file_magic". +want_nocaseglob=$lt_want_nocaseglob + +# DLL creation program. +DLLTOOL=$lt_DLLTOOL + +# Command to associate shared and link libraries. +sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd + +# The archiver. +AR=$lt_AR + +# Flags to create an archive. +AR_FLAGS=$lt_AR_FLAGS + +# How to feed a file listing to the archiver. +archiver_list_spec=$lt_archiver_list_spec + +# A symbol stripping program. +STRIP=$lt_STRIP + +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Whether to use a lock for old archive extraction. +lock_old_archive_extraction=$lock_old_archive_extraction + +# A C compiler. +LTCC=$lt_CC + +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + +# Specify filename containing input files for \$NM. +nm_file_list_spec=$lt_nm_file_list_spec + +# The root where to search for dependent libraries,and in which our libraries should be installed. +lt_sysroot=$lt_sysroot + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Manifest tool. +MANIFEST_TOOL=$lt_MANIFEST_TOOL + +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL + +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT + +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO + +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL + +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 + +# Old archive suffix (normally "a"). +libext=$libext + +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink + +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Library versioning type. +version_type=$version_type + +# Shared library runtime path variable. +runpath_var=$runpath_var + +# Shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Permission mode override for installation of shared libraries. +install_override_mode=$lt_install_override_mode + +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + + +# The linker used to build libraries. +LD=$lt_LD + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds + +# A language specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU compiler? +with_gcc=$GCC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Commands necessary for finishing linking programs. +postlink_cmds=$lt_postlink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + +ltmain="$ac_aux_dir/ltmain.sh" + + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + if test x"$xsi_shell" = xyes; then + sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ +func_dirname ()\ +{\ +\ case ${1} in\ +\ */*) func_dirname_result="${1%/*}${2}" ;;\ +\ * ) func_dirname_result="${3}" ;;\ +\ esac\ +} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_basename ()$/,/^} # func_basename /c\ +func_basename ()\ +{\ +\ func_basename_result="${1##*/}"\ +} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ +func_dirname_and_basename ()\ +{\ +\ case ${1} in\ +\ */*) func_dirname_result="${1%/*}${2}" ;;\ +\ * ) func_dirname_result="${3}" ;;\ +\ esac\ +\ func_basename_result="${1##*/}"\ +} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ +func_stripname ()\ +{\ +\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ +\ # positional parameters, so assign one to ordinary parameter first.\ +\ func_stripname_result=${3}\ +\ func_stripname_result=${func_stripname_result#"${1}"}\ +\ func_stripname_result=${func_stripname_result%"${2}"}\ +} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ +func_split_long_opt ()\ +{\ +\ func_split_long_opt_name=${1%%=*}\ +\ func_split_long_opt_arg=${1#*=}\ +} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ +func_split_short_opt ()\ +{\ +\ func_split_short_opt_arg=${1#??}\ +\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ +} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ +func_lo2o ()\ +{\ +\ case ${1} in\ +\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ +\ *) func_lo2o_result=${1} ;;\ +\ esac\ +} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_xform ()$/,/^} # func_xform /c\ +func_xform ()\ +{\ + func_xform_result=${1%.*}.lo\ +} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_arith ()$/,/^} # func_arith /c\ +func_arith ()\ +{\ + func_arith_result=$(( $* ))\ +} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_len ()$/,/^} # func_len /c\ +func_len ()\ +{\ + func_len_result=${#1}\ +} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + +fi + +if test x"$lt_shell_append" = xyes; then + sed -e '/^func_append ()$/,/^} # func_append /c\ +func_append ()\ +{\ + eval "${1}+=\\${2}"\ +} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ +func_append_quoted ()\ +{\ +\ func_quote_for_eval "${2}"\ +\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ +} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + # Save a `func_append' function call where possible by direct use of '+=' + sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +else + # Save a `func_append' function call even when '+=' is not available + sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +fi + +if test x"$_lt_function_replace_fail" = x":"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 +$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} +fi + + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + + ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/configure.ac b/configure.ac new file mode 100644 index 0000000..2909a98 --- /dev/null +++ b/configure.ac @@ -0,0 +1,130 @@ + +AC_INIT([iptables], [1.4.14]) + +# See libtool.info "Libtool's versioning system" +libxtables_vcurrent=7 +libxtables_vage=0 + +AC_CONFIG_AUX_DIR([build-aux]) +AC_CONFIG_HEADERS([config.h]) +AC_CONFIG_MACRO_DIR([m4]) +AC_PROG_INSTALL +AM_INIT_AUTOMAKE([-Wall]) +AC_PROG_CC +AM_PROG_CC_C_O +AC_DISABLE_STATIC +AM_PROG_LIBTOOL + +AC_ARG_WITH([kernel], + AS_HELP_STRING([--with-kernel=PATH], + [Path to kernel source/build directory]), + [kbuilddir="$withval"; ksourcedir="$withval";]) +AC_ARG_WITH([kbuild], + AS_HELP_STRING([--with-kbuild=PATH], + [Path to kernel build directory [[/lib/modules/CURRENT/build]]]), + [kbuilddir="$withval"]) +AC_ARG_WITH([ksource], + AS_HELP_STRING([--with-ksource=PATH], + [Path to kernel source directory [[/lib/modules/CURRENT/source]]]), + [ksourcedir="$withval"]) +AC_ARG_WITH([xtlibdir], + AS_HELP_STRING([--with-xtlibdir=PATH], + [Path where to install Xtables extensions [[LIBEXECDIR/xtables]]]), + [xtlibdir="$withval"], + [xtlibdir="${libdir}/xtables"]) +AC_ARG_ENABLE([ipv4], + AS_HELP_STRING([--disable-ipv4], [Do not build iptables]), + [enable_ipv4="$enableval"], [enable_ipv4="yes"]) +AC_ARG_ENABLE([ipv6], + AS_HELP_STRING([--disable-ipv6], [Do not build ip6tables]), + [enable_ipv6="$enableval"], [enable_ipv6="yes"]) +AC_ARG_ENABLE([largefile], + AS_HELP_STRING([--disable-largefile], [Do not build largefile support]), + [enable_largefile="$enableval"], + [enable_largefile="yes"; + largefile_cppflags='-D_LARGEFILE_SOURCE=1 -D_LARGE_FILES -D_FILE_OFFSET_BITS=64']) +AC_ARG_ENABLE([devel], + AS_HELP_STRING([--enable-devel], + [Install Xtables development headers]), + [enable_devel="$enableval"], [enable_devel="yes"]) +AC_ARG_ENABLE([libipq], + AS_HELP_STRING([--enable-libipq], [Build and install libipq])) +AC_ARG_WITH([pkgconfigdir], AS_HELP_STRING([--with-pkgconfigdir=PATH], + [Path to the pkgconfig directory [[LIBDIR/pkgconfig]]]), + [pkgconfigdir="$withval"], [pkgconfigdir='${libdir}/pkgconfig']) + +libiptc_LDFLAGS2=""; +AX_CHECK_LINKER_FLAGS([-Wl,--no-as-needed], + [libiptc_LDFLAGS2="-Wl,--no-as-needed"]) +AC_SUBST([libiptc_LDFLAGS2]) + +AC_MSG_CHECKING([whether $LD knows -Wl,--no-undefined]) +saved_LDFLAGS="$LDFLAGS"; +LDFLAGS="-Wl,--no-undefined"; +AC_LINK_IFELSE([AC_LANG_SOURCE([int main(void) {}])], + [noundef_LDFLAGS="$LDFLAGS"; AC_MSG_RESULT([yes])], + [AC_MSG_RESULT([no])] +) +LDFLAGS="$saved_LDFLAGS"; + +blacklist_modules=""; + +AC_CHECK_HEADERS([linux/dccp.h linux/ip_vs.h linux/magic.h linux/proc_fs.h]) +if test "$ac_cv_header_linux_dccp_h" != "yes"; then + blacklist_modules="$blacklist_modules dccp"; +fi; +if test "$ac_cv_header_linux_ip_vs_h" != "yes"; then + blacklist_modules="$blacklist_modules ipvs"; +fi; + +AC_SUBST([blacklist_modules]) +AC_CHECK_SIZEOF([struct ip6_hdr], [], [#include ]) + +AM_CONDITIONAL([ENABLE_STATIC], [test "$enable_static" = "yes"]) +AM_CONDITIONAL([ENABLE_SHARED], [test "$enable_shared" = "yes"]) +AM_CONDITIONAL([ENABLE_IPV4], [test "$enable_ipv4" = "yes"]) +AM_CONDITIONAL([ENABLE_IPV6], [test "$enable_ipv6" = "yes"]) +AM_CONDITIONAL([ENABLE_LARGEFILE], [test "$enable_largefile" = "yes"]) +AM_CONDITIONAL([ENABLE_DEVEL], [test "$enable_devel" = "yes"]) +AM_CONDITIONAL([ENABLE_LIBIPQ], [test "$enable_libipq" = "yes"]) + +PKG_CHECK_MODULES([libnfnetlink], [libnfnetlink >= 1.0], + [nfnetlink=1], [nfnetlink=0]) +AM_CONDITIONAL([HAVE_LIBNFNETLINK], [test "$nfnetlink" = 1]) + +regular_CFLAGS="-Wall -Waggregate-return -Wmissing-declarations \ + -Wmissing-prototypes -Wredundant-decls -Wshadow -Wstrict-prototypes \ + -Winline -pipe"; +regular_CPPFLAGS="${largefile_cppflags} -D_REENTRANT \ + -DXTABLES_LIBDIR=\\\"\${xtlibdir}\\\" -DXTABLES_INTERNAL"; +kinclude_CPPFLAGS=""; +if [[ -n "$kbuilddir" ]]; then + kinclude_CPPFLAGS="$kinclude_CPPFLAGS -I$kbuilddir/include"; +fi; +if [[ -n "$ksourcedir" ]]; then + kinclude_CPPFLAGS="$kinclude_CPPFLAGS -I$ksourcedir/include"; +fi; +pkgdatadir='${datadir}/xtables'; + +AC_SUBST([regular_CFLAGS]) +AC_SUBST([regular_CPPFLAGS]) +AC_SUBST([noundef_LDFLAGS]) +AC_SUBST([kinclude_CPPFLAGS]) +AC_SUBST([kbuilddir]) +AC_SUBST([ksourcedir]) +AC_SUBST([xtlibdir]) +AC_SUBST([pkgconfigdir]) +AC_SUBST([pkgdatadir]) +AC_SUBST([libxtables_vcurrent]) +AC_SUBST([libxtables_vage]) +libxtables_vmajor=$(($libxtables_vcurrent - $libxtables_vage)); +AC_SUBST([libxtables_vmajor]) + +AC_CONFIG_FILES([Makefile extensions/GNUmakefile include/Makefile + iptables/Makefile iptables/xtables.pc + libipq/Makefile libipq/libipq.pc + libiptc/Makefile libiptc/libiptc.pc + libiptc/libip4tc.pc libiptc/libip6tc.pc + libxtables/Makefile utils/Makefile + include/xtables.h include/iptables/internal.h]) +AC_OUTPUT diff --git a/extensions/.gitignore b/extensions/.gitignore new file mode 100644 index 0000000..2e74faf --- /dev/null +++ b/extensions/.gitignore @@ -0,0 +1,9 @@ +.*.d +.*.dd +*.oo + +/GNUmakefile +/initext.c +/initext?.c +/matches?.man +/targets?.man diff --git a/extensions/GNUmakefile.in b/extensions/GNUmakefile.in new file mode 100644 index 0000000..218dc3a --- /dev/null +++ b/extensions/GNUmakefile.in @@ -0,0 +1,225 @@ +# -*- Makefile -*- + +top_builddir = @top_builddir@ +builddir = @builddir@ +top_srcdir = @top_srcdir@ +srcdir = @srcdir@ +ksourcedir = @ksourcedir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ +libdir = @libdir@ +libexecdir = @libexecdir@ +xtlibdir = @xtlibdir@ + +CC = @CC@ +CCLD = ${CC} +CFLAGS = @CFLAGS@ +CPPFLAGS = @CPPFLAGS@ +LDFLAGS = @LDFLAGS@ +regular_CFLAGS = @regular_CFLAGS@ +regular_CPPFLAGS = @regular_CPPFLAGS@ +kinclude_CPPFLAGS = @kinclude_CPPFLAGS@ + +AM_CFLAGS = ${regular_CFLAGS} +AM_CPPFLAGS = ${regular_CPPFLAGS} -I${top_builddir}/include -I${top_builddir} -I${top_srcdir}/include ${kinclude_CPPFLAGS} +AM_DEPFLAGS = -Wp,-MMD,$(@D)/.$(@F).d,-MT,$@ +AM_LDFLAGS = @noundef_LDFLAGS@ + +ifeq (${V},) +AM_LIBTOOL_SILENT = --silent +AM_VERBOSE_CC = @echo " CC " $@; +AM_VERBOSE_CCLD = @echo " CCLD " $@; +AM_VERBOSE_CXX = @echo " CXX " $@; +AM_VERBOSE_CXXLD = @echo " CXXLD " $@; +AM_VERBOSE_AR = @echo " AR " $@; +AM_VERBOSE_GEN = @echo " GEN " $@; +endif + +# +# Wildcard module list +# +pfx_build_mod := $(patsubst ${srcdir}/libxt_%.c,%,$(sort $(wildcard ${srcdir}/libxt_*.c))) +@ENABLE_IPV4_TRUE@ pf4_build_mod := $(patsubst ${srcdir}/libipt_%.c,%,$(sort $(wildcard ${srcdir}/libipt_*.c))) +@ENABLE_IPV6_TRUE@ pf6_build_mod := $(patsubst ${srcdir}/libip6t_%.c,%,$(sort $(wildcard ${srcdir}/libip6t_*.c))) +pfx_build_mod := $(filter-out @blacklist_modules@,${pfx_build_mod}) +pf4_build_mod := $(filter-out @blacklist_modules@,${pf4_build_mod}) +pf6_build_mod := $(filter-out @blacklist_modules@,${pf6_build_mod}) +pfx_objs := $(patsubst %,libxt_%.o,${pfx_build_mod}) +pf4_objs := $(patsubst %,libipt_%.o,${pf4_build_mod}) +pf6_objs := $(patsubst %,libip6t_%.o,${pf6_build_mod}) +pfx_solibs := $(patsubst %,libxt_%.so,${pfx_build_mod}) +pf4_solibs := $(patsubst %,libipt_%.so,${pf4_build_mod}) +pf6_solibs := $(patsubst %,libip6t_%.so,${pf6_build_mod}) + + +# +# Building blocks +# +targets := libext.a libext4.a libext6.a \ + matches4.man matches6.man \ + targets4.man targets6.man +targets_install := +@ENABLE_STATIC_TRUE@ libext_objs := ${pfx_objs} +@ENABLE_STATIC_TRUE@ libext4_objs := ${pf4_objs} +@ENABLE_STATIC_TRUE@ libext6_objs := ${pf6_objs} +@ENABLE_STATIC_FALSE@ targets += ${pfx_solibs} ${pf4_solibs} ${pf6_solibs} +@ENABLE_STATIC_FALSE@ targets_install += ${pfx_solibs} ${pf4_solibs} ${pf6_solibs} + +.SECONDARY: + +.PHONY: all install clean distclean FORCE + +all: ${targets} + +install: ${targets_install} + @mkdir -p "${DESTDIR}${xtlibdir}"; + if test -n "${targets_install}"; then install -pm0755 $^ "${DESTDIR}${xtlibdir}/"; fi; + +clean: + rm -f *.o *.oo *.so *.a {matches,targets}[46].man initext.c initext4.c initext6.c; + +distclean: clean + rm -f .*.d .*.dd; + +init%.o: init%.c + ${AM_VERBOSE_CC} ${CC} ${AM_CPPFLAGS} ${AM_DEPFLAGS} ${AM_CFLAGS} -D_INIT=$*_init ${CFLAGS} -o $@ -c $<; + +-include .*.d + + +# +# Shared libraries +# +lib%.so: lib%.oo + ${AM_VERBOSE_CCLD} ${CCLD} ${AM_LDFLAGS} -shared ${LDFLAGS} -o $@ $< -L../libxtables/.libs -lxtables ${$*_LIBADD}; + +lib%.oo: ${srcdir}/lib%.c + ${AM_VERBOSE_CC} ${CC} ${AM_CPPFLAGS} ${AM_DEPFLAGS} ${AM_CFLAGS} -D_INIT=lib$*_init -DPIC -fPIC ${CFLAGS} -o $@ -c $<; + +# Need the LIBADDs in iptables/Makefile.am too for libxtables_la_LIBADD +xt_RATEEST_LIBADD = -lm +xt_statistic_LIBADD = -lm + + +# +# Static bits +# +# If static building is disabled, libext*.a will still be generated, +# but will be empty. This is good since we can do with less case +# handling code in the Makefiles. +# +lib%.o: ${srcdir}/lib%.c + ${AM_VERBOSE_CC} ${CC} ${AM_CPPFLAGS} ${AM_DEPFLAGS} ${AM_CFLAGS} -DNO_SHARED_LIBS=1 -D_INIT=lib$*_init ${CFLAGS} -o $@ -c $<; + +libext.a: initext.o ${libext_objs} + ${AM_VERBOSE_AR} ${AR} crs $@ $^; + +libext4.a: initext4.o ${libext4_objs} + ${AM_VERBOSE_AR} ${AR} crs $@ $^; + +libext6.a: initext6.o ${libext6_objs} + ${AM_VERBOSE_AR} ${AR} crs $@ $^; + +initext_func := $(addprefix xt_,${pfx_build_mod}) +initext4_func := $(addprefix ipt_,${pf4_build_mod}) +initext6_func := $(addprefix ip6t_,${pf6_build_mod}) + +.initext.dd: FORCE + @echo "${initext_func}" >$@.tmp; \ + cmp -s $@ $@.tmp || mv $@.tmp $@; \ + rm -f $@.tmp; + +.initext4.dd: FORCE + @echo "${initext4_func}" >$@.tmp; \ + cmp -s $@ $@.tmp || mv $@.tmp $@; \ + rm -f $@.tmp; + +.initext6.dd: FORCE + @echo "${initext6_func}" >$@.tmp; \ + cmp -s $@ $@.tmp || mv $@.tmp $@; \ + rm -f $@.tmp; + +initext.c: .initext.dd + ${AM_VERBOSE_GEN} + @( \ + echo "" >$@; \ + for i in ${initext_func}; do \ + echo "extern void lib$${i}_init(void);" >>$@; \ + done; \ + echo "void init_extensions(void);" >>$@; \ + echo "void init_extensions(void)" >>$@; \ + echo "{" >>$@; \ + for i in ${initext_func}; do \ + echo " ""lib$${i}_init();" >>$@; \ + done; \ + echo "}" >>$@; \ + ); + +initext4.c: .initext4.dd + ${AM_VERBOSE_GEN} + @( \ + echo "" >$@; \ + for i in ${initext4_func}; do \ + echo "extern void lib$${i}_init(void);" >>$@; \ + done; \ + echo "void init_extensions4(void);" >>$@; \ + echo "void init_extensions4(void)" >>$@; \ + echo "{" >>$@; \ + for i in ${initext4_func}; do \ + echo " ""lib$${i}_init();" >>$@; \ + done; \ + echo "}" >>$@; \ + ); + +initext6.c: .initext6.dd + ${AM_VERBOSE_GEN} + @( \ + echo "" >$@; \ + for i in ${initext6_func}; do \ + echo "extern void lib$${i}_init(void);" >>$@; \ + done; \ + echo "void init_extensions6(void);" >>$@; \ + echo "void init_extensions6(void)" >>$@; \ + echo "{" >>$@; \ + for i in ${initext6_func}; do \ + echo " ""lib$${i}_init();" >>$@; \ + done; \ + echo "}" >>$@; \ + ); + +# +# Manual pages +# +ex_matches = $(shell echo ${1} | LC_ALL=POSIX grep -Eo '\b[[:lower:][:digit:]_]+\b') +ex_targets = $(shell echo ${1} | LC_ALL=POSIX grep -Eo '\b[[:upper:][:digit:]_]+\b') +man_run = \ + ${AM_VERBOSE_GEN} \ + for ext in $(sort ${1}); do \ + f="${srcdir}/libxt_$$ext.man"; \ + cf="${srcdir}/libxt_$$ext.c"; \ + if [ -f "$$f" ] && grep -Eq "$(3)|NFPROTO_UNSPEC" "$$cf"; then \ + echo -e "\t+ $$f" >&2; \ + echo ".SS $$ext"; \ + cat "$$f" || exit $$?; \ + continue; \ + fi; \ + f="${srcdir}/lib$(2)t_$$ext.man"; \ + if [ -f "$$f" ]; then \ + echo -e "\t+ $$f" >&2; \ + echo ".SS $$ext"; \ + cat "$$f" || exit $$?; \ + continue; \ + fi; \ + done >$@; + +matches4.man: .initext.dd .initext4.dd $(wildcard ${srcdir}/lib*.man) + $(call man_run,$(call ex_matches,${pfx_build_mod} ${pf4_build_mod}),ip,NFPROTO_IPV4) + +matches6.man: .initext.dd .initext6.dd $(wildcard ${srcdir}/lib*.man) + $(call man_run,$(call ex_matches,${pfx_build_mod} ${pf6_build_mod}),ip6,NFPROTO_IPV6) + +targets4.man: .initext.dd .initext4.dd $(wildcard ${srcdir}/lib*.man) + $(call man_run,$(call ex_targets,${pfx_build_mod} ${pf4_build_mod}),ip,NFPROTO_IPV4) + +targets6.man: .initext.dd .initext6.dd $(wildcard ${srcdir}/lib*.man) + $(call man_run,$(call ex_targets,${pfx_build_mod} ${pf6_build_mod}),ip6,NFPROTO_IPV6) diff --git a/extensions/dscp_helper.c b/extensions/dscp_helper.c new file mode 100644 index 0000000..75b1fec --- /dev/null +++ b/extensions/dscp_helper.c @@ -0,0 +1,79 @@ +/* + * DiffServ classname <-> DiffServ codepoint mapping functions. + * + * The latest list of the mappings can be found at: + * + * + * This code is released under the GNU GPL v2, 1991 + * + * Author: Iain Barnes + */ + +#include +#include +#include + + +static const struct ds_class +{ + const char *name; + unsigned int dscp; +} ds_classes[] = +{ + { "CS0", 0x00 }, + { "CS1", 0x08 }, + { "CS2", 0x10 }, + { "CS3", 0x18 }, + { "CS4", 0x20 }, + { "CS5", 0x28 }, + { "CS6", 0x30 }, + { "CS7", 0x38 }, + { "BE", 0x00 }, + { "AF11", 0x0a }, + { "AF12", 0x0c }, + { "AF13", 0x0e }, + { "AF21", 0x12 }, + { "AF22", 0x14 }, + { "AF23", 0x16 }, + { "AF31", 0x1a }, + { "AF32", 0x1c }, + { "AF33", 0x1e }, + { "AF41", 0x22 }, + { "AF42", 0x24 }, + { "AF43", 0x26 }, + { "EF", 0x2e } +}; + + + +static unsigned int +class_to_dscp(const char *name) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(ds_classes); i++) { + if (!strncasecmp(name, ds_classes[i].name, + strlen(ds_classes[i].name))) + return ds_classes[i].dscp; + } + + xtables_error(PARAMETER_PROBLEM, + "Invalid DSCP value `%s'\n", name); +} + + +#if 0 +static const char * +dscp_to_name(unsigned int dscp) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ds_classes); ++i) + if (dscp == ds_classes[i].dscp) + return ds_classes[i].name; + + xtables_error(PARAMETER_PROBLEM, + "Invalid DSCP value `%d'\n", dscp); +} +#endif + diff --git a/extensions/libip6t_HL.c b/extensions/libip6t_HL.c new file mode 100644 index 0000000..52ca5d3 --- /dev/null +++ b/extensions/libip6t_HL.c @@ -0,0 +1,127 @@ +/* + * IPv6 Hop Limit Target module + * Maciej Soltysiak + * Based on HW's ttl target + * This program is distributed under the terms of GNU GPL + */ +#include +#include +#include + +enum { + O_HL_SET = 0, + O_HL_INC, + O_HL_DEC, + F_HL_SET = 1 << O_HL_SET, + F_HL_INC = 1 << O_HL_INC, + F_HL_DEC = 1 << O_HL_DEC, + F_ANY = F_HL_SET | F_HL_INC | F_HL_DEC, +}; + +#define s struct ip6t_HL_info +static const struct xt_option_entry HL_opts[] = { + {.name = "hl-set", .type = XTTYPE_UINT8, .id = O_HL_SET, + .excl = F_ANY, .flags = XTOPT_PUT, XTOPT_POINTER(s, hop_limit)}, + {.name = "hl-dec", .type = XTTYPE_UINT8, .id = O_HL_DEC, + .excl = F_ANY, .flags = XTOPT_PUT, XTOPT_POINTER(s, hop_limit), + .min = 1}, + {.name = "hl-inc", .type = XTTYPE_UINT8, .id = O_HL_INC, + .excl = F_ANY, .flags = XTOPT_PUT, XTOPT_POINTER(s, hop_limit), + .min = 1}, + XTOPT_TABLEEND, +}; +#undef s + +static void HL_help(void) +{ + printf( +"HL target options\n" +" --hl-set value Set HL to \n" +" --hl-dec value Decrement HL by \n" +" --hl-inc value Increment HL by \n"); +} + +static void HL_parse(struct xt_option_call *cb) +{ + struct ip6t_HL_info *info = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_HL_SET: + info->mode = IP6T_HL_SET; + break; + case O_HL_INC: + info->mode = IP6T_HL_INC; + break; + case O_HL_DEC: + info->mode = IP6T_HL_DEC; + break; + } +} + +static void HL_check(struct xt_fcheck_call *cb) +{ + if (!(cb->xflags & F_ANY)) + xtables_error(PARAMETER_PROBLEM, + "HL: You must specify an action"); +} + +static void HL_save(const void *ip, const struct xt_entry_target *target) +{ + const struct ip6t_HL_info *info = + (struct ip6t_HL_info *) target->data; + + switch (info->mode) { + case IP6T_HL_SET: + printf(" --hl-set"); + break; + case IP6T_HL_DEC: + printf(" --hl-dec"); + break; + + case IP6T_HL_INC: + printf(" --hl-inc"); + break; + } + printf(" %u", info->hop_limit); +} + +static void HL_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct ip6t_HL_info *info = + (struct ip6t_HL_info *) target->data; + + printf(" HL "); + switch (info->mode) { + case IP6T_HL_SET: + printf("set to"); + break; + case IP6T_HL_DEC: + printf("decrement by"); + break; + case IP6T_HL_INC: + printf("increment by"); + break; + } + printf(" %u", info->hop_limit); +} + +static struct xtables_target hl_tg6_reg = { + .name = "HL", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV6, + .size = XT_ALIGN(sizeof(struct ip6t_HL_info)), + .userspacesize = XT_ALIGN(sizeof(struct ip6t_HL_info)), + .help = HL_help, + .print = HL_print, + .save = HL_save, + .x6_parse = HL_parse, + .x6_fcheck = HL_check, + .x6_options = HL_opts, +}; + +void _init(void) +{ + xtables_register_target(&hl_tg6_reg); +} diff --git a/extensions/libip6t_HL.man b/extensions/libip6t_HL.man new file mode 100644 index 0000000..0f3afb1 --- /dev/null +++ b/extensions/libip6t_HL.man @@ -0,0 +1,17 @@ +This is used to modify the Hop Limit field in IPv6 header. The Hop Limit field +is similar to what is known as TTL value in IPv4. Setting or incrementing the +Hop Limit field can potentially be very dangerous, so it should be avoided at +any cost. This target is only valid in +.B mangle +table. +.PP +.B Don't ever set or increment the value on packets that leave your local network! +.TP +\fB\-\-hl\-set\fP \fIvalue\fP +Set the Hop Limit to `value'. +.TP +\fB\-\-hl\-dec\fP \fIvalue\fP +Decrement the Hop Limit `value' times. +.TP +\fB\-\-hl\-inc\fP \fIvalue\fP +Increment the Hop Limit `value' times. diff --git a/extensions/libip6t_LOG.c b/extensions/libip6t_LOG.c new file mode 100644 index 0000000..2b1ae28 --- /dev/null +++ b/extensions/libip6t_LOG.c @@ -0,0 +1,184 @@ +#include +#include +#include +#include +#include + +#ifndef IP6T_LOG_UID /* Old kernel */ +#define IP6T_LOG_UID 0x08 +#undef IP6T_LOG_MASK +#define IP6T_LOG_MASK 0x0f +#endif + +#define LOG_DEFAULT_LEVEL LOG_WARNING + +enum { + O_LOG_LEVEL = 0, + O_LOG_PREFIX, + O_LOG_TCPSEQ, + O_LOG_TCPOPTS, + O_LOG_IPOPTS, + O_LOG_UID, + O_LOG_MAC, +}; + +static void LOG_help(void) +{ + printf( +"LOG target options:\n" +" --log-level level Level of logging (numeric or see syslog.conf)\n" +" --log-prefix prefix Prefix log messages with this prefix.\n" +" --log-tcp-sequence Log TCP sequence numbers.\n" +" --log-tcp-options Log TCP options.\n" +" --log-ip-options Log IP options.\n" +" --log-uid Log UID owning the local socket.\n" +" --log-macdecode Decode MAC addresses and protocol.\n"); +} + +#define s struct ip6t_log_info +static const struct xt_option_entry LOG_opts[] = { + {.name = "log-level", .id = O_LOG_LEVEL, .type = XTTYPE_SYSLOGLEVEL, + .flags = XTOPT_PUT, XTOPT_POINTER(s, level)}, + {.name = "log-prefix", .id = O_LOG_PREFIX, .type = XTTYPE_STRING, + .flags = XTOPT_PUT, XTOPT_POINTER(s, prefix), .min = 1}, + {.name = "log-tcp-sequence", .id = O_LOG_TCPSEQ, .type = XTTYPE_NONE}, + {.name = "log-tcp-options", .id = O_LOG_TCPOPTS, .type = XTTYPE_NONE}, + {.name = "log-ip-options", .id = O_LOG_IPOPTS, .type = XTTYPE_NONE}, + {.name = "log-uid", .id = O_LOG_UID, .type = XTTYPE_NONE}, + {.name = "log-macdecode", .id = O_LOG_MAC, .type = XTTYPE_NONE}, + XTOPT_TABLEEND, +}; +#undef s + +static void LOG_init(struct xt_entry_target *t) +{ + struct ip6t_log_info *loginfo = (struct ip6t_log_info *)t->data; + + loginfo->level = LOG_DEFAULT_LEVEL; + +} + +struct ip6t_log_names { + const char *name; + unsigned int level; +}; + +static const struct ip6t_log_names ip6t_log_names[] += { { .name = "alert", .level = LOG_ALERT }, + { .name = "crit", .level = LOG_CRIT }, + { .name = "debug", .level = LOG_DEBUG }, + { .name = "emerg", .level = LOG_EMERG }, + { .name = "error", .level = LOG_ERR }, /* DEPRECATED */ + { .name = "info", .level = LOG_INFO }, + { .name = "notice", .level = LOG_NOTICE }, + { .name = "panic", .level = LOG_EMERG }, /* DEPRECATED */ + { .name = "warning", .level = LOG_WARNING } +}; + +static void LOG_parse(struct xt_option_call *cb) +{ + struct ip6t_log_info *info = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_LOG_PREFIX: + if (strchr(cb->arg, '\n') != NULL) + xtables_error(PARAMETER_PROBLEM, + "Newlines not allowed in --log-prefix"); + break; + case O_LOG_TCPSEQ: + info->logflags |= IP6T_LOG_TCPSEQ; + break; + case O_LOG_TCPOPTS: + info->logflags |= IP6T_LOG_TCPOPT; + break; + case O_LOG_IPOPTS: + info->logflags |= IP6T_LOG_IPOPT; + break; + case O_LOG_UID: + info->logflags |= IP6T_LOG_UID; + break; + case O_LOG_MAC: + info->logflags |= IP6T_LOG_MACDECODE; + break; + } +} + +static void LOG_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct ip6t_log_info *loginfo + = (const struct ip6t_log_info *)target->data; + unsigned int i = 0; + + printf(" LOG"); + if (numeric) + printf(" flags %u level %u", + loginfo->logflags, loginfo->level); + else { + for (i = 0; i < ARRAY_SIZE(ip6t_log_names); ++i) + if (loginfo->level == ip6t_log_names[i].level) { + printf(" level %s", ip6t_log_names[i].name); + break; + } + if (i == ARRAY_SIZE(ip6t_log_names)) + printf(" UNKNOWN level %u", loginfo->level); + if (loginfo->logflags & IP6T_LOG_TCPSEQ) + printf(" tcp-sequence"); + if (loginfo->logflags & IP6T_LOG_TCPOPT) + printf(" tcp-options"); + if (loginfo->logflags & IP6T_LOG_IPOPT) + printf(" ip-options"); + if (loginfo->logflags & IP6T_LOG_UID) + printf(" uid"); + if (loginfo->logflags & IP6T_LOG_MACDECODE) + printf(" macdecode"); + if (loginfo->logflags & ~(IP6T_LOG_MASK)) + printf(" unknown-flags"); + } + + if (strcmp(loginfo->prefix, "") != 0) + printf(" prefix \"%s\"", loginfo->prefix); +} + +static void LOG_save(const void *ip, const struct xt_entry_target *target) +{ + const struct ip6t_log_info *loginfo + = (const struct ip6t_log_info *)target->data; + + if (strcmp(loginfo->prefix, "") != 0) + printf(" --log-prefix \"%s\"", loginfo->prefix); + + if (loginfo->level != LOG_DEFAULT_LEVEL) + printf(" --log-level %d", loginfo->level); + + if (loginfo->logflags & IP6T_LOG_TCPSEQ) + printf(" --log-tcp-sequence"); + if (loginfo->logflags & IP6T_LOG_TCPOPT) + printf(" --log-tcp-options"); + if (loginfo->logflags & IP6T_LOG_IPOPT) + printf(" --log-ip-options"); + if (loginfo->logflags & IP6T_LOG_UID) + printf(" --log-uid"); + if (loginfo->logflags & IP6T_LOG_MACDECODE) + printf(" --log-macdecode"); +} + +static struct xtables_target log_tg6_reg = { + .name = "LOG", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV6, + .size = XT_ALIGN(sizeof(struct ip6t_log_info)), + .userspacesize = XT_ALIGN(sizeof(struct ip6t_log_info)), + .help = LOG_help, + .init = LOG_init, + .print = LOG_print, + .save = LOG_save, + .x6_parse = LOG_parse, + .x6_options = LOG_opts, +}; + +void _init(void) +{ + xtables_register_target(&log_tg6_reg); +} diff --git a/extensions/libip6t_LOG.man b/extensions/libip6t_LOG.man new file mode 100644 index 0000000..b7803fe --- /dev/null +++ b/extensions/libip6t_LOG.man @@ -0,0 +1,31 @@ +Turn on kernel logging of matching packets. When this option is set +for a rule, the Linux kernel will print some information on all +matching packets (like most IPv6 IPv6-header fields) via the kernel log +(where it can be read with +.I dmesg +or +.IR syslogd (8)). +This is a "non-terminating target", i.e. rule traversal continues at +the next rule. So if you want to LOG the packets you refuse, use two +separate rules with the same matching criteria, first using target LOG +then DROP (or REJECT). +.TP +\fB\-\-log\-level\fP \fIlevel\fP +Level of logging (numeric or see \fIsyslog.conf\fP(5)). +.TP +\fB\-\-log\-prefix\fP \fIprefix\fP +Prefix log messages with the specified prefix; up to 29 letters long, +and useful for distinguishing messages in the logs. +.TP +\fB\-\-log\-tcp\-sequence\fP +Log TCP sequence numbers. This is a security risk if the log is +readable by users. +.TP +\fB\-\-log\-tcp\-options\fP +Log options from the TCP packet header. +.TP +\fB\-\-log\-ip\-options\fP +Log options from the IPv6 packet header. +.TP +\fB\-\-log\-uid\fP +Log the userid of the process which generated the packet. diff --git a/extensions/libip6t_REJECT.c b/extensions/libip6t_REJECT.c new file mode 100644 index 0000000..8085321 --- /dev/null +++ b/extensions/libip6t_REJECT.c @@ -0,0 +1,140 @@ +/* Shared library add-on to ip6tables to add customized REJECT support. + * + * (C) 2000 Jozsef Kadlecsik + * + * ported to IPv6 by Harald Welte + * + */ +#include +#include +#include +#include + +struct reject_names { + const char *name; + const char *alias; + enum ip6t_reject_with with; + const char *desc; +}; + +enum { + O_REJECT_WITH = 0, +}; + +static const struct reject_names reject_table[] = { + {"icmp6-no-route", "no-route", + IP6T_ICMP6_NO_ROUTE, "ICMPv6 no route"}, + {"icmp6-adm-prohibited", "adm-prohibited", + IP6T_ICMP6_ADM_PROHIBITED, "ICMPv6 administratively prohibited"}, +#if 0 + {"icmp6-not-neighbor", "not-neighbor"}, + IP6T_ICMP6_NOT_NEIGHBOR, "ICMPv6 not a neighbor"}, +#endif + {"icmp6-addr-unreachable", "addr-unreach", + IP6T_ICMP6_ADDR_UNREACH, "ICMPv6 address unreachable"}, + {"icmp6-port-unreachable", "port-unreach", + IP6T_ICMP6_PORT_UNREACH, "ICMPv6 port unreachable"}, + {"tcp-reset", "tcp-reset", + IP6T_TCP_RESET, "TCP RST packet"} +}; + +static void +print_reject_types(void) +{ + unsigned int i; + + printf("Valid reject types:\n"); + + for (i = 0; i < ARRAY_SIZE(reject_table); ++i) { + printf(" %-25s\t%s\n", reject_table[i].name, reject_table[i].desc); + printf(" %-25s\talias\n", reject_table[i].alias); + } + printf("\n"); +} + +static void REJECT_help(void) +{ + printf( +"REJECT target options:\n" +"--reject-with type drop input packet and send back\n" +" a reply packet according to type:\n"); + + print_reject_types(); +} + +static const struct xt_option_entry REJECT_opts[] = { + {.name = "reject-with", .id = O_REJECT_WITH, .type = XTTYPE_STRING}, + XTOPT_TABLEEND, +}; + +static void REJECT_init(struct xt_entry_target *t) +{ + struct ip6t_reject_info *reject = (struct ip6t_reject_info *)t->data; + + /* default */ + reject->with = IP6T_ICMP6_PORT_UNREACH; + +} + +static void REJECT_parse(struct xt_option_call *cb) +{ + struct ip6t_reject_info *reject = cb->data; + unsigned int i; + + xtables_option_parse(cb); + for (i = 0; i < ARRAY_SIZE(reject_table); ++i) + if (strncasecmp(reject_table[i].name, + cb->arg, strlen(cb->arg)) == 0 || + strncasecmp(reject_table[i].alias, + cb->arg, strlen(cb->arg)) == 0) { + reject->with = reject_table[i].with; + return; + } + xtables_error(PARAMETER_PROBLEM, + "unknown reject type \"%s\"", cb->arg); +} + +static void REJECT_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct ip6t_reject_info *reject + = (const struct ip6t_reject_info *)target->data; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(reject_table); ++i) + if (reject_table[i].with == reject->with) + break; + printf(" reject-with %s", reject_table[i].name); +} + +static void REJECT_save(const void *ip, const struct xt_entry_target *target) +{ + const struct ip6t_reject_info *reject + = (const struct ip6t_reject_info *)target->data; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(reject_table); ++i) + if (reject_table[i].with == reject->with) + break; + + printf(" --reject-with %s", reject_table[i].name); +} + +static struct xtables_target reject_tg6_reg = { + .name = "REJECT", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV6, + .size = XT_ALIGN(sizeof(struct ip6t_reject_info)), + .userspacesize = XT_ALIGN(sizeof(struct ip6t_reject_info)), + .help = REJECT_help, + .init = REJECT_init, + .print = REJECT_print, + .save = REJECT_save, + .x6_parse = REJECT_parse, + .x6_options = REJECT_opts, +}; + +void _init(void) +{ + xtables_register_target(&reject_tg6_reg); +} diff --git a/extensions/libip6t_REJECT.man b/extensions/libip6t_REJECT.man new file mode 100644 index 0000000..2d09e05 --- /dev/null +++ b/extensions/libip6t_REJECT.man @@ -0,0 +1,33 @@ +This is used to send back an error packet in response to the matched +packet: otherwise it is equivalent to +.B DROP +so it is a terminating TARGET, ending rule traversal. +This target is only valid in the +.BR INPUT , +.B FORWARD +and +.B OUTPUT +chains, and user-defined chains which are only called from those +chains. The following option controls the nature of the error packet +returned: +.TP +\fB\-\-reject\-with\fP \fItype\fP +The type given can be +\fBicmp6\-no\-route\fP, +\fBno\-route\fP, +\fBicmp6\-adm\-prohibited\fP, +\fBadm\-prohibited\fP, +\fBicmp6\-addr\-unreachable\fP, +\fBaddr\-unreach\fP, +\fBicmp6\-port\-unreachable\fP or +\fBport\-unreach\fP +which return the appropriate ICMPv6 error message (\fBport\-unreach\fP is +the default). Finally, the option +\fBtcp\-reset\fP +can be used on rules which only match the TCP protocol: this causes a +TCP RST packet to be sent back. This is mainly useful for blocking +.I ident +(113/tcp) probes which frequently occur when sending mail to broken mail +hosts (which won't accept your mail otherwise). +\fBtcp\-reset\fP +can only be used with kernel versions 2.6.14 or later. diff --git a/extensions/libip6t_ah.c b/extensions/libip6t_ah.c new file mode 100644 index 0000000..26f8140 --- /dev/null +++ b/extensions/libip6t_ah.c @@ -0,0 +1,140 @@ +#include +#include +#include + +enum { + O_AHSPI = 0, + O_AHLEN, + O_AHRES, +}; + +static void ah_help(void) +{ + printf( +"ah match options:\n" +"[!] --ahspi spi[:spi] match spi (range)\n" +"[!] --ahlen length total length of this header\n" +" --ahres check the reserved field too\n"); +} + +#define s struct ip6t_ah +static const struct xt_option_entry ah_opts[] = { + {.name = "ahspi", .id = O_AHSPI, .type = XTTYPE_UINT32RC, + .flags = XTOPT_INVERT | XTOPT_PUT, XTOPT_POINTER(s, spis)}, + {.name = "ahlen", .id = O_AHLEN, .type = XTTYPE_UINT32, + .flags = XTOPT_INVERT | XTOPT_PUT, XTOPT_POINTER(s, hdrlen)}, + {.name = "ahres", .id = O_AHRES, .type = XTTYPE_NONE}, + XTOPT_TABLEEND, +}; +#undef s + +static void ah_parse(struct xt_option_call *cb) +{ + struct ip6t_ah *ahinfo = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_AHSPI: + if (cb->nvals == 1) + ahinfo->spis[1] = ahinfo->spis[0]; + if (cb->invert) + ahinfo->invflags |= IP6T_AH_INV_SPI; + break; + case O_AHLEN: + if (cb->invert) + ahinfo->invflags |= IP6T_AH_INV_LEN; + break; + case O_AHRES: + ahinfo->hdrres = 1; + break; + } +} + +static void +print_spis(const char *name, uint32_t min, uint32_t max, + int invert) +{ + const char *inv = invert ? "!" : ""; + + if (min != 0 || max != 0xFFFFFFFF || invert) { + if (min == max) + printf("%s:%s%u", name, inv, min); + else + printf("%ss:%s%u:%u", name, inv, min, max); + } +} + +static void +print_len(const char *name, uint32_t len, int invert) +{ + const char *inv = invert ? "!" : ""; + + if (len != 0 || invert) + printf("%s:%s%u", name, inv, len); +} + +static void ah_print(const void *ip, const struct xt_entry_match *match, + int numeric) +{ + const struct ip6t_ah *ah = (struct ip6t_ah *)match->data; + + printf(" ah "); + print_spis("spi", ah->spis[0], ah->spis[1], + ah->invflags & IP6T_AH_INV_SPI); + print_len("length", ah->hdrlen, + ah->invflags & IP6T_AH_INV_LEN); + + if (ah->hdrres) + printf(" reserved"); + + if (ah->invflags & ~IP6T_AH_INV_MASK) + printf(" Unknown invflags: 0x%X", + ah->invflags & ~IP6T_AH_INV_MASK); +} + +static void ah_save(const void *ip, const struct xt_entry_match *match) +{ + const struct ip6t_ah *ahinfo = (struct ip6t_ah *)match->data; + + if (!(ahinfo->spis[0] == 0 + && ahinfo->spis[1] == 0xFFFFFFFF)) { + printf("%s --ahspi ", + (ahinfo->invflags & IP6T_AH_INV_SPI) ? " !" : ""); + if (ahinfo->spis[0] + != ahinfo->spis[1]) + printf("%u:%u", + ahinfo->spis[0], + ahinfo->spis[1]); + else + printf("%u", + ahinfo->spis[0]); + } + + if (ahinfo->hdrlen != 0 || (ahinfo->invflags & IP6T_AH_INV_LEN) ) { + printf("%s --ahlen %u", + (ahinfo->invflags & IP6T_AH_INV_LEN) ? " !" : "", + ahinfo->hdrlen); + } + + if (ahinfo->hdrres != 0 ) + printf(" --ahres"); +} + +static struct xtables_match ah_mt6_reg = { + .name = "ah", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV6, + .size = XT_ALIGN(sizeof(struct ip6t_ah)), + .userspacesize = XT_ALIGN(sizeof(struct ip6t_ah)), + .help = ah_help, + .print = ah_print, + .save = ah_save, + .x6_parse = ah_parse, + .x6_options = ah_opts, +}; + +void +_init(void) +{ + xtables_register_match(&ah_mt6_reg); +} diff --git a/extensions/libip6t_ah.man b/extensions/libip6t_ah.man new file mode 100644 index 0000000..9c24dcf --- /dev/null +++ b/extensions/libip6t_ah.man @@ -0,0 +1,10 @@ +This module matches the parameters in Authentication header of IPsec packets. +.TP +[\fB!\fP] \fB\-\-ahspi\fP \fIspi\fP[\fB:\fP\fIspi\fP] +Matches SPI. +.TP +[\fB!\fP] \fB\-\-ahlen\fP \fIlength\fP +Total length of this header in octets. +.TP +\fB\-\-ahres\fP +Matches if the reserved field is filled with zero. diff --git a/extensions/libip6t_dst.c b/extensions/libip6t_dst.c new file mode 100644 index 0000000..3fd4c01 --- /dev/null +++ b/extensions/libip6t_dst.c @@ -0,0 +1,194 @@ +#include +#include +#include +#include +#include +#include + +enum { + O_DSTLEN = 0, + O_DSTOPTS, +}; + +static void dst_help(void) +{ + printf( +"dst match options:\n" +"[!] --dst-len length total length of this header\n" +" --dst-opts TYPE[:LEN][,TYPE[:LEN]...]\n" +" Options and its length (list, max: %d)\n", +IP6T_OPTS_OPTSNR); +} + +static const struct xt_option_entry dst_opts[] = { + {.name = "dst-len", .id = O_DSTLEN, .type = XTTYPE_UINT32, + .flags = XTOPT_INVERT | XTOPT_PUT, + XTOPT_POINTER(struct ip6t_opts, hdrlen)}, + {.name = "dst-opts", .id = O_DSTOPTS, .type = XTTYPE_STRING}, + XTOPT_TABLEEND, +}; + +static uint32_t +parse_opts_num(const char *idstr, const char *typestr) +{ + unsigned long int id; + char* ep; + + id = strtoul(idstr, &ep, 0); + + if ( idstr == ep ) { + xtables_error(PARAMETER_PROBLEM, + "dst: no valid digits in %s `%s'", typestr, idstr); + } + if ( id == ULONG_MAX && errno == ERANGE ) { + xtables_error(PARAMETER_PROBLEM, + "%s `%s' specified too big: would overflow", + typestr, idstr); + } + if ( *idstr != '\0' && *ep != '\0' ) { + xtables_error(PARAMETER_PROBLEM, + "dst: error parsing %s `%s'", typestr, idstr); + } + return id; +} + +static int +parse_options(const char *optsstr, uint16_t *opts) +{ + char *buffer, *cp, *next, *range; + unsigned int i; + + buffer = strdup(optsstr); + if (!buffer) + xtables_error(OTHER_PROBLEM, "strdup failed"); + + for (cp = buffer, i = 0; cp && i < IP6T_OPTS_OPTSNR; cp = next, i++) + { + next = strchr(cp, ','); + + if (next) + *next++='\0'; + + range = strchr(cp, ':'); + + if (range) { + if (i == IP6T_OPTS_OPTSNR-1) + xtables_error(PARAMETER_PROBLEM, + "too many ports specified"); + *range++ = '\0'; + } + + opts[i] = (parse_opts_num(cp, "opt") & 0xFF) << 8; + if (range) { + if (opts[i] == 0) + xtables_error(PARAMETER_PROBLEM, + "PAD0 hasn't got length"); + opts[i] |= parse_opts_num(range, "length") & 0xFF; + } else + opts[i] |= (0x00FF); + +#ifdef DEBUG + printf("opts str: %s %s\n", cp, range); + printf("opts opt: %04X\n", opts[i]); +#endif + } + + if (cp) + xtables_error(PARAMETER_PROBLEM, "too many addresses specified"); + + free(buffer); + +#ifdef DEBUG + printf("addr nr: %d\n", i); +#endif + + return i; +} + +static void dst_parse(struct xt_option_call *cb) +{ + struct ip6t_opts *optinfo = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_DSTLEN: + optinfo->flags |= IP6T_OPTS_LEN; + break; + case O_DSTOPTS: + optinfo->optsnr = parse_options(cb->arg, optinfo->opts); + optinfo->flags |= IP6T_OPTS_OPTS; + break; + } +} + +static void +print_options(unsigned int optsnr, uint16_t *optsp) +{ + unsigned int i; + + printf(" "); + for(i = 0; i < optsnr; i++) { + printf("%d", (optsp[i] & 0xFF00) >> 8); + + if ((optsp[i] & 0x00FF) != 0x00FF) + printf(":%d", (optsp[i] & 0x00FF)); + + printf("%c", (i != optsnr - 1) ? ',' : ' '); + } +} + +static void dst_print(const void *ip, const struct xt_entry_match *match, + int numeric) +{ + const struct ip6t_opts *optinfo = (struct ip6t_opts *)match->data; + + printf(" dst"); + if (optinfo->flags & IP6T_OPTS_LEN) + printf(" length:%s%u", + optinfo->invflags & IP6T_OPTS_INV_LEN ? "!" : "", + optinfo->hdrlen); + + if (optinfo->flags & IP6T_OPTS_OPTS) + printf(" opts"); + + print_options(optinfo->optsnr, (uint16_t *)optinfo->opts); + + if (optinfo->invflags & ~IP6T_OPTS_INV_MASK) + printf(" Unknown invflags: 0x%X", + optinfo->invflags & ~IP6T_OPTS_INV_MASK); +} + +static void dst_save(const void *ip, const struct xt_entry_match *match) +{ + const struct ip6t_opts *optinfo = (struct ip6t_opts *)match->data; + + if (optinfo->flags & IP6T_OPTS_LEN) { + printf("%s --dst-len %u", + (optinfo->invflags & IP6T_OPTS_INV_LEN) ? " !" : "", + optinfo->hdrlen); + } + + if (optinfo->flags & IP6T_OPTS_OPTS) + printf(" --dst-opts"); + + print_options(optinfo->optsnr, (uint16_t *)optinfo->opts); +} + +static struct xtables_match dst_mt6_reg = { + .name = "dst", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV6, + .size = XT_ALIGN(sizeof(struct ip6t_opts)), + .userspacesize = XT_ALIGN(sizeof(struct ip6t_opts)), + .help = dst_help, + .print = dst_print, + .save = dst_save, + .x6_parse = dst_parse, + .x6_options = dst_opts, +}; + +void +_init(void) +{ + xtables_register_match(&dst_mt6_reg); +} diff --git a/extensions/libip6t_dst.man b/extensions/libip6t_dst.man new file mode 100644 index 0000000..bfbb501 --- /dev/null +++ b/extensions/libip6t_dst.man @@ -0,0 +1,7 @@ +This module matches the parameters in Destination Options header +.TP +[\fB!\fP] \fB\-\-dst\-len\fP \fIlength\fP +Total length of this header in octets. +.TP +\fB\-\-dst\-opts\fP \fItype\fP[\fB:\fP\fIlength\fP][\fB,\fP\fItype\fP[\fB:\fP\fIlength\fP]...] +numeric type of option and the length of the option data in octets. diff --git a/extensions/libip6t_eui64.c b/extensions/libip6t_eui64.c new file mode 100644 index 0000000..607bf86 --- /dev/null +++ b/extensions/libip6t_eui64.c @@ -0,0 +1,15 @@ +/* Shared library add-on to ip6tables to add EUI64 address checking support. */ +#include + +static struct xtables_match eui64_mt6_reg = { + .name = "eui64", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV6, + .size = XT_ALIGN(sizeof(int)), + .userspacesize = XT_ALIGN(sizeof(int)), +}; + +void _init(void) +{ + xtables_register_match(&eui64_mt6_reg); +} diff --git a/extensions/libip6t_eui64.man b/extensions/libip6t_eui64.man new file mode 100644 index 0000000..cd80b98 --- /dev/null +++ b/extensions/libip6t_eui64.man @@ -0,0 +1,10 @@ +This module matches the EUI-64 part of a stateless autoconfigured IPv6 address. +It compares the EUI-64 derived from the source MAC address in Ethernet frame +with the lower 64 bits of the IPv6 source address. But "Universal/Local" +bit is not compared. This module doesn't match other link layer frame, and +is only valid in the +.BR PREROUTING , +.BR INPUT +and +.BR FORWARD +chains. diff --git a/extensions/libip6t_frag.c b/extensions/libip6t_frag.c new file mode 100644 index 0000000..d8bcaee --- /dev/null +++ b/extensions/libip6t_frag.c @@ -0,0 +1,186 @@ +#include +#include +#include + +enum { + O_FRAGID = 0, + O_FRAGLEN, + O_FRAGRES, + O_FRAGFIRST, + O_FRAGMORE, + O_FRAGLAST, + F_FRAGMORE = 1 << O_FRAGMORE, + F_FRAGLAST = 1 << O_FRAGLAST, +}; + +static void frag_help(void) +{ + printf( +"frag match options:\n" +"[!] --fragid id[:id] match the id (range)\n" +"[!] --fraglen length total length of this header\n" +" --fragres check the reserved field too\n" +" --fragfirst matches on the first fragment\n" +" [--fragmore|--fraglast] there are more fragments or this\n" +" is the last one\n"); +} + +#define s struct ip6t_frag +static const struct xt_option_entry frag_opts[] = { + {.name = "fragid", .id = O_FRAGID, .type = XTTYPE_UINT32RC, + .flags = XTOPT_INVERT | XTOPT_PUT, XTOPT_POINTER(s, ids)}, + {.name = "fraglen", .id = O_FRAGLEN, .type = XTTYPE_UINT32, + .flags = XTOPT_INVERT | XTOPT_PUT, XTOPT_POINTER(s, hdrlen)}, + {.name = "fragres", .id = O_FRAGRES, .type = XTTYPE_NONE}, + {.name = "fragfirst", .id = O_FRAGFIRST, .type = XTTYPE_NONE}, + {.name = "fragmore", .id = O_FRAGMORE, .type = XTTYPE_NONE, + .excl = F_FRAGLAST}, + {.name = "fraglast", .id = O_FRAGLAST, .type = XTTYPE_NONE, + .excl = F_FRAGMORE}, + XTOPT_TABLEEND, +}; +#undef s + +static void frag_parse(struct xt_option_call *cb) +{ + struct ip6t_frag *fraginfo = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_FRAGID: + if (cb->nvals == 1) + fraginfo->ids[1] = fraginfo->ids[0]; + if (cb->invert) + fraginfo->invflags |= IP6T_FRAG_INV_IDS; + /* + * Note however that IP6T_FRAG_IDS is not tested by anything, + * so it is merely here for completeness. + */ + fraginfo->flags |= IP6T_FRAG_IDS; + break; + case O_FRAGLEN: + /* + * As of Linux 3.0, the kernel does not check for + * fraglen at all. + */ + if (cb->invert) + fraginfo->invflags |= IP6T_FRAG_INV_LEN; + fraginfo->flags |= IP6T_FRAG_LEN; + break; + case O_FRAGRES: + fraginfo->flags |= IP6T_FRAG_RES; + break; + case O_FRAGFIRST: + fraginfo->flags |= IP6T_FRAG_FST; + break; + case O_FRAGMORE: + fraginfo->flags |= IP6T_FRAG_MF; + break; + case O_FRAGLAST: + fraginfo->flags |= IP6T_FRAG_NMF; + break; + } +} + +static void +print_ids(const char *name, uint32_t min, uint32_t max, + int invert) +{ + const char *inv = invert ? "!" : ""; + + if (min != 0 || max != 0xFFFFFFFF || invert) { + printf("%s", name); + if (min == max) + printf(":%s%u", inv, min); + else + printf("s:%s%u:%u", inv, min, max); + } +} + +static void frag_print(const void *ip, const struct xt_entry_match *match, + int numeric) +{ + const struct ip6t_frag *frag = (struct ip6t_frag *)match->data; + + printf(" frag "); + print_ids("id", frag->ids[0], frag->ids[1], + frag->invflags & IP6T_FRAG_INV_IDS); + + if (frag->flags & IP6T_FRAG_LEN) { + printf(" length:%s%u", + frag->invflags & IP6T_FRAG_INV_LEN ? "!" : "", + frag->hdrlen); + } + + if (frag->flags & IP6T_FRAG_RES) + printf(" reserved"); + + if (frag->flags & IP6T_FRAG_FST) + printf(" first"); + + if (frag->flags & IP6T_FRAG_MF) + printf(" more"); + + if (frag->flags & IP6T_FRAG_NMF) + printf(" last"); + + if (frag->invflags & ~IP6T_FRAG_INV_MASK) + printf(" Unknown invflags: 0x%X", + frag->invflags & ~IP6T_FRAG_INV_MASK); +} + +static void frag_save(const void *ip, const struct xt_entry_match *match) +{ + const struct ip6t_frag *fraginfo = (struct ip6t_frag *)match->data; + + if (!(fraginfo->ids[0] == 0 + && fraginfo->ids[1] == 0xFFFFFFFF)) { + printf("%s --fragid ", + (fraginfo->invflags & IP6T_FRAG_INV_IDS) ? " !" : ""); + if (fraginfo->ids[0] + != fraginfo->ids[1]) + printf("%u:%u", + fraginfo->ids[0], + fraginfo->ids[1]); + else + printf("%u", + fraginfo->ids[0]); + } + + if (fraginfo->flags & IP6T_FRAG_LEN) { + printf("%s --fraglen %u", + (fraginfo->invflags & IP6T_FRAG_INV_LEN) ? " !" : "", + fraginfo->hdrlen); + } + + if (fraginfo->flags & IP6T_FRAG_RES) + printf(" --fragres"); + + if (fraginfo->flags & IP6T_FRAG_FST) + printf(" --fragfirst"); + + if (fraginfo->flags & IP6T_FRAG_MF) + printf(" --fragmore"); + + if (fraginfo->flags & IP6T_FRAG_NMF) + printf(" --fraglast"); +} + +static struct xtables_match frag_mt6_reg = { + .name = "frag", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV6, + .size = XT_ALIGN(sizeof(struct ip6t_frag)), + .userspacesize = XT_ALIGN(sizeof(struct ip6t_frag)), + .help = frag_help, + .print = frag_print, + .save = frag_save, + .x6_parse = frag_parse, + .x6_options = frag_opts, +}; + +void +_init(void) +{ + xtables_register_match(&frag_mt6_reg); +} diff --git a/extensions/libip6t_frag.man b/extensions/libip6t_frag.man new file mode 100644 index 0000000..7bfa227 --- /dev/null +++ b/extensions/libip6t_frag.man @@ -0,0 +1,20 @@ +This module matches the parameters in Fragment header. +.TP +[\fB!\fP] \fB\-\-fragid\fP \fIid\fP[\fB:\fP\fIid\fP] +Matches the given Identification or range of it. +.TP +[\fB!\fP] \fB\-\-fraglen\fP \fIlength\fP +This option cannot be used with kernel version 2.6.10 or later. The length of +Fragment header is static and this option doesn't make sense. +.TP +\fB\-\-fragres\fP +Matches if the reserved fields are filled with zero. +.TP +\fB\-\-fragfirst\fP +Matches on the first fragment. +.TP +\fB\-\-fragmore\fP +Matches if there are more fragments. +.TP +\fB\-\-fraglast\fP +Matches if this is the last fragment. diff --git a/extensions/libip6t_hbh.c b/extensions/libip6t_hbh.c new file mode 100644 index 0000000..c0389ed --- /dev/null +++ b/extensions/libip6t_hbh.c @@ -0,0 +1,184 @@ +#include +#include +#include +#include +#include +#include + +#define DEBUG 0 + +enum { + O_HBH_LEN = 0, + O_HBH_OPTS, +}; + +static void hbh_help(void) +{ + printf( +"hbh match options:\n" +"[!] --hbh-len length total length of this header\n" +" --hbh-opts TYPE[:LEN][,TYPE[:LEN]...] \n" +" Options and its length (list, max: %d)\n", +IP6T_OPTS_OPTSNR); +} + +static const struct xt_option_entry hbh_opts[] = { + {.name = "hbh-len", .id = O_HBH_LEN, .type = XTTYPE_UINT32, + .flags = XTOPT_INVERT | XTOPT_PUT, + XTOPT_POINTER(struct ip6t_opts, hdrlen)}, + {.name = "hbh-opts", .id = O_HBH_OPTS, .type = XTTYPE_STRING}, + XTOPT_TABLEEND, +}; + +static uint32_t +parse_opts_num(const char *idstr, const char *typestr) +{ + unsigned long int id; + char* ep; + + id = strtoul(idstr,&ep,0) ; + + if ( idstr == ep ) { + xtables_error(PARAMETER_PROBLEM, + "hbh: no valid digits in %s `%s'", typestr, idstr); + } + if ( id == ULONG_MAX && errno == ERANGE ) { + xtables_error(PARAMETER_PROBLEM, + "%s `%s' specified too big: would overflow", + typestr, idstr); + } + if ( *idstr != '\0' && *ep != '\0' ) { + xtables_error(PARAMETER_PROBLEM, + "hbh: error parsing %s `%s'", typestr, idstr); + } + return id; +} + +static int +parse_options(const char *optsstr, uint16_t *opts) +{ + char *buffer, *cp, *next, *range; + unsigned int i; + + buffer = strdup(optsstr); + if (!buffer) xtables_error(OTHER_PROBLEM, "strdup failed"); + + for (cp=buffer, i=0; cp && idata; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_HBH_LEN: + if (cb->invert) + optinfo->invflags |= IP6T_OPTS_INV_LEN; + optinfo->flags |= IP6T_OPTS_LEN; + break; + case O_HBH_OPTS: + optinfo->optsnr = parse_options(cb->arg, optinfo->opts); + optinfo->flags |= IP6T_OPTS_OPTS; + break; + } +} + +static void +print_options(unsigned int optsnr, uint16_t *optsp) +{ + unsigned int i; + + for(i=0; i>8); + if ((optsp[i] & 0x00FF) != 0x00FF){ + printf(":%d", (optsp[i] & 0x00FF)); + } + } +} + +static void hbh_print(const void *ip, const struct xt_entry_match *match, + int numeric) +{ + const struct ip6t_opts *optinfo = (struct ip6t_opts *)match->data; + + printf(" hbh"); + if (optinfo->flags & IP6T_OPTS_LEN) { + printf(" length"); + printf(":%s", optinfo->invflags & IP6T_OPTS_INV_LEN ? "!" : ""); + printf("%u", optinfo->hdrlen); + } + if (optinfo->flags & IP6T_OPTS_OPTS) printf(" opts"); + print_options(optinfo->optsnr, (uint16_t *)optinfo->opts); + if (optinfo->invflags & ~IP6T_OPTS_INV_MASK) + printf(" Unknown invflags: 0x%X", + optinfo->invflags & ~IP6T_OPTS_INV_MASK); +} + +static void hbh_save(const void *ip, const struct xt_entry_match *match) +{ + const struct ip6t_opts *optinfo = (struct ip6t_opts *)match->data; + + if (optinfo->flags & IP6T_OPTS_LEN) { + printf("%s --hbh-len %u", + (optinfo->invflags & IP6T_OPTS_INV_LEN) ? " !" : "", + optinfo->hdrlen); + } + + if (optinfo->flags & IP6T_OPTS_OPTS) + printf(" --hbh-opts"); + print_options(optinfo->optsnr, (uint16_t *)optinfo->opts); +} + +static struct xtables_match hbh_mt6_reg = { + .name = "hbh", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV6, + .size = XT_ALIGN(sizeof(struct ip6t_opts)), + .userspacesize = XT_ALIGN(sizeof(struct ip6t_opts)), + .help = hbh_help, + .print = hbh_print, + .save = hbh_save, + .x6_parse = hbh_parse, + .x6_options = hbh_opts, +}; + +void +_init(void) +{ + xtables_register_match(&hbh_mt6_reg); +} diff --git a/extensions/libip6t_hbh.man b/extensions/libip6t_hbh.man new file mode 100644 index 0000000..2d92e04 --- /dev/null +++ b/extensions/libip6t_hbh.man @@ -0,0 +1,7 @@ +This module matches the parameters in Hop-by-Hop Options header +.TP +[\fB!\fP] \fB\-\-hbh\-len\fP \fIlength\fP +Total length of this header in octets. +.TP +\fB\-\-hbh\-opts\fP \fItype\fP[\fB:\fP\fIlength\fP][\fB,\fP\fItype\fP[\fB:\fP\fIlength\fP]...] +numeric type of option and the length of the option data in octets. diff --git a/extensions/libip6t_hl.c b/extensions/libip6t_hl.c new file mode 100644 index 0000000..3559db4 --- /dev/null +++ b/extensions/libip6t_hl.c @@ -0,0 +1,118 @@ +/* + * IPv6 Hop Limit matching module + * Maciej Soltysiak + * Based on HW's ttl match + * This program is released under the terms of GNU GPL + * Cleanups by Stephane Ouellette + */ +#include +#include +#include + +enum { + O_HL_EQ = 0, + O_HL_LT, + O_HL_GT, + F_HL_EQ = 1 << O_HL_EQ, + F_HL_LT = 1 << O_HL_LT, + F_HL_GT = 1 << O_HL_GT, + F_ANY = F_HL_EQ | F_HL_LT | F_HL_GT, +}; + +static void hl_help(void) +{ + printf( +"hl match options:\n" +"[!] --hl-eq value Match hop limit value\n" +" --hl-lt value Match HL < value\n" +" --hl-gt value Match HL > value\n"); +} + +static void hl_parse(struct xt_option_call *cb) +{ + struct ip6t_hl_info *info = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_HL_EQ: + info->mode = cb->invert ? IP6T_HL_NE : IP6T_HL_EQ; + break; + case O_HL_LT: + info->mode = IP6T_HL_LT; + break; + case O_HL_GT: + info->mode = IP6T_HL_GT; + break; + } +} + +static void hl_check(struct xt_fcheck_call *cb) +{ + if (!(cb->xflags & F_ANY)) + xtables_error(PARAMETER_PROBLEM, + "HL match: You must specify one of " + "`--hl-eq', `--hl-lt', `--hl-gt'"); +} + +static void hl_print(const void *ip, const struct xt_entry_match *match, + int numeric) +{ + static const char *const op[] = { + [IP6T_HL_EQ] = "==", + [IP6T_HL_NE] = "!=", + [IP6T_HL_LT] = "<", + [IP6T_HL_GT] = ">" }; + + const struct ip6t_hl_info *info = + (struct ip6t_hl_info *) match->data; + + printf(" HL match HL %s %u", op[info->mode], info->hop_limit); +} + +static void hl_save(const void *ip, const struct xt_entry_match *match) +{ + static const char *const op[] = { + [IP6T_HL_EQ] = "--hl-eq", + [IP6T_HL_NE] = "! --hl-eq", + [IP6T_HL_LT] = "--hl-lt", + [IP6T_HL_GT] = "--hl-gt" }; + + const struct ip6t_hl_info *info = + (struct ip6t_hl_info *) match->data; + + printf(" %s %u", op[info->mode], info->hop_limit); +} + +#define s struct ip6t_hl_info +static const struct xt_option_entry hl_opts[] = { + {.name = "hl-lt", .id = O_HL_LT, .excl = F_ANY, .type = XTTYPE_UINT8, + .flags = XTOPT_PUT, XTOPT_POINTER(s, hop_limit)}, + {.name = "hl-gt", .id = O_HL_GT, .excl = F_ANY, .type = XTTYPE_UINT8, + .flags = XTOPT_PUT, XTOPT_POINTER(s, hop_limit)}, + {.name = "hl-eq", .id = O_HL_EQ, .excl = F_ANY, .type = XTTYPE_UINT8, + .flags = XTOPT_INVERT | XTOPT_PUT, XTOPT_POINTER(s, hop_limit)}, + {.name = "hl", .id = O_HL_EQ, .excl = F_ANY, .type = XTTYPE_UINT8, + .flags = XTOPT_PUT, XTOPT_POINTER(s, hop_limit)}, + XTOPT_TABLEEND, +}; +#undef s + +static struct xtables_match hl_mt6_reg = { + .name = "hl", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV6, + .size = XT_ALIGN(sizeof(struct ip6t_hl_info)), + .userspacesize = XT_ALIGN(sizeof(struct ip6t_hl_info)), + .help = hl_help, + .print = hl_print, + .save = hl_save, + .x6_parse = hl_parse, + .x6_fcheck = hl_check, + .x6_options = hl_opts, +}; + + +void _init(void) +{ + xtables_register_match(&hl_mt6_reg); +} diff --git a/extensions/libip6t_hl.man b/extensions/libip6t_hl.man new file mode 100644 index 0000000..dfbfaf8 --- /dev/null +++ b/extensions/libip6t_hl.man @@ -0,0 +1,10 @@ +This module matches the Hop Limit field in the IPv6 header. +.TP +[\fB!\fP] \fB\-\-hl\-eq\fP \fIvalue\fP +Matches if Hop Limit equals \fIvalue\fP. +.TP +\fB\-\-hl\-lt\fP \fIvalue\fP +Matches if Hop Limit is less than \fIvalue\fP. +.TP +\fB\-\-hl\-gt\fP \fIvalue\fP +Matches if Hop Limit is greater than \fIvalue\fP. diff --git a/extensions/libip6t_icmp6.c b/extensions/libip6t_icmp6.c new file mode 100644 index 0000000..68b940b --- /dev/null +++ b/extensions/libip6t_icmp6.c @@ -0,0 +1,239 @@ +#include +#include +#include +#include +#include /* INT_MAX in ip6_tables.h */ +#include + +enum { + O_ICMPV6_TYPE = 0, +}; + +struct icmpv6_names { + const char *name; + uint8_t type; + uint8_t code_min, code_max; +}; + +static const struct icmpv6_names icmpv6_codes[] = { + { "destination-unreachable", 1, 0, 0xFF }, + { "no-route", 1, 0, 0 }, + { "communication-prohibited", 1, 1, 1 }, + { "address-unreachable", 1, 3, 3 }, + { "port-unreachable", 1, 4, 4 }, + + { "packet-too-big", 2, 0, 0xFF }, + + { "time-exceeded", 3, 0, 0xFF }, + /* Alias */ { "ttl-exceeded", 3, 0, 0xFF }, + { "ttl-zero-during-transit", 3, 0, 0 }, + { "ttl-zero-during-reassembly", 3, 1, 1 }, + + { "parameter-problem", 4, 0, 0xFF }, + { "bad-header", 4, 0, 0 }, + { "unknown-header-type", 4, 1, 1 }, + { "unknown-option", 4, 2, 2 }, + + { "echo-request", 128, 0, 0xFF }, + /* Alias */ { "ping", 128, 0, 0xFF }, + + { "echo-reply", 129, 0, 0xFF }, + /* Alias */ { "pong", 129, 0, 0xFF }, + + { "router-solicitation", 133, 0, 0xFF }, + + { "router-advertisement", 134, 0, 0xFF }, + + { "neighbour-solicitation", 135, 0, 0xFF }, + /* Alias */ { "neighbor-solicitation", 135, 0, 0xFF }, + + { "neighbour-advertisement", 136, 0, 0xFF }, + /* Alias */ { "neighbor-advertisement", 136, 0, 0xFF }, + + { "redirect", 137, 0, 0xFF }, + +}; + +static void +print_icmpv6types(void) +{ + unsigned int i; + printf("Valid ICMPv6 Types:"); + + for (i = 0; i < ARRAY_SIZE(icmpv6_codes); ++i) { + if (i && icmpv6_codes[i].type == icmpv6_codes[i-1].type) { + if (icmpv6_codes[i].code_min == icmpv6_codes[i-1].code_min + && (icmpv6_codes[i].code_max + == icmpv6_codes[i-1].code_max)) + printf(" (%s)", icmpv6_codes[i].name); + else + printf("\n %s", icmpv6_codes[i].name); + } + else + printf("\n%s", icmpv6_codes[i].name); + } + printf("\n"); +} + +static void icmp6_help(void) +{ + printf( +"icmpv6 match options:\n" +"[!] --icmpv6-type typename match icmpv6 type\n" +" (or numeric type or type/code)\n"); + print_icmpv6types(); +} + +static const struct xt_option_entry icmp6_opts[] = { + {.name = "icmpv6-type", .id = O_ICMPV6_TYPE, .type = XTTYPE_STRING, + .flags = XTOPT_MAND | XTOPT_INVERT}, + XTOPT_TABLEEND, +}; + +static void +parse_icmpv6(const char *icmpv6type, uint8_t *type, uint8_t code[]) +{ + static const unsigned int limit = ARRAY_SIZE(icmpv6_codes); + unsigned int match = limit; + unsigned int i; + + for (i = 0; i < limit; i++) { + if (strncasecmp(icmpv6_codes[i].name, icmpv6type, strlen(icmpv6type)) + == 0) { + if (match != limit) + xtables_error(PARAMETER_PROBLEM, + "Ambiguous ICMPv6 type `%s':" + " `%s' or `%s'?", + icmpv6type, + icmpv6_codes[match].name, + icmpv6_codes[i].name); + match = i; + } + } + + if (match != limit) { + *type = icmpv6_codes[match].type; + code[0] = icmpv6_codes[match].code_min; + code[1] = icmpv6_codes[match].code_max; + } else { + char *slash; + char buffer[strlen(icmpv6type) + 1]; + unsigned int number; + + strcpy(buffer, icmpv6type); + slash = strchr(buffer, '/'); + + if (slash) + *slash = '\0'; + + if (!xtables_strtoui(buffer, NULL, &number, 0, UINT8_MAX)) + xtables_error(PARAMETER_PROBLEM, + "Invalid ICMPv6 type `%s'\n", buffer); + *type = number; + if (slash) { + if (!xtables_strtoui(slash+1, NULL, &number, 0, UINT8_MAX)) + xtables_error(PARAMETER_PROBLEM, + "Invalid ICMPv6 code `%s'\n", + slash+1); + code[0] = code[1] = number; + } else { + code[0] = 0; + code[1] = 0xFF; + } + } +} + +static void icmp6_init(struct xt_entry_match *m) +{ + struct ip6t_icmp *icmpv6info = (struct ip6t_icmp *)m->data; + + icmpv6info->code[1] = 0xFF; +} + +static void icmp6_parse(struct xt_option_call *cb) +{ + struct ip6t_icmp *icmpv6info = cb->data; + + xtables_option_parse(cb); + parse_icmpv6(cb->arg, &icmpv6info->type, icmpv6info->code); + if (cb->invert) + icmpv6info->invflags |= IP6T_ICMP_INV; +} + +static void print_icmpv6type(uint8_t type, + uint8_t code_min, uint8_t code_max, + int invert, + int numeric) +{ + if (!numeric) { + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(icmpv6_codes); ++i) + if (icmpv6_codes[i].type == type + && icmpv6_codes[i].code_min == code_min + && icmpv6_codes[i].code_max == code_max) + break; + + if (i != ARRAY_SIZE(icmpv6_codes)) { + printf(" %s%s", + invert ? "!" : "", + icmpv6_codes[i].name); + return; + } + } + + if (invert) + printf(" !"); + + printf("type %u", type); + if (code_min == code_max) + printf(" code %u", code_min); + else if (code_min != 0 || code_max != 0xFF) + printf(" codes %u-%u", code_min, code_max); +} + +static void icmp6_print(const void *ip, const struct xt_entry_match *match, + int numeric) +{ + const struct ip6t_icmp *icmpv6 = (struct ip6t_icmp *)match->data; + + printf(" ipv6-icmp"); + print_icmpv6type(icmpv6->type, icmpv6->code[0], icmpv6->code[1], + icmpv6->invflags & IP6T_ICMP_INV, + numeric); + + if (icmpv6->invflags & ~IP6T_ICMP_INV) + printf(" Unknown invflags: 0x%X", + icmpv6->invflags & ~IP6T_ICMP_INV); +} + +static void icmp6_save(const void *ip, const struct xt_entry_match *match) +{ + const struct ip6t_icmp *icmpv6 = (struct ip6t_icmp *)match->data; + + if (icmpv6->invflags & IP6T_ICMP_INV) + printf(" !"); + + printf(" --icmpv6-type %u", icmpv6->type); + if (icmpv6->code[0] != 0 || icmpv6->code[1] != 0xFF) + printf("/%u", icmpv6->code[0]); +} + +static struct xtables_match icmp6_mt6_reg = { + .name = "icmp6", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV6, + .size = XT_ALIGN(sizeof(struct ip6t_icmp)), + .userspacesize = XT_ALIGN(sizeof(struct ip6t_icmp)), + .help = icmp6_help, + .init = icmp6_init, + .print = icmp6_print, + .save = icmp6_save, + .x6_parse = icmp6_parse, + .x6_options = icmp6_opts, +}; + +void _init(void) +{ + xtables_register_match(&icmp6_mt6_reg); +} diff --git a/extensions/libip6t_icmp6.man b/extensions/libip6t_icmp6.man new file mode 100644 index 0000000..817e21c --- /dev/null +++ b/extensions/libip6t_icmp6.man @@ -0,0 +1,14 @@ +This extension can be used if `\-\-protocol ipv6\-icmp' or `\-\-protocol icmpv6' is +specified. It provides the following option: +.TP +[\fB!\fP] \fB\-\-icmpv6\-type\fP \fItype\fP[\fB/\fP\fIcode\fP]|\fItypename\fP +This allows specification of the ICMPv6 type, which can be a numeric +ICMPv6 +.IR type , +.IR type +and +.IR code , +or one of the ICMPv6 type names shown by the command +.nf + ip6tables \-p ipv6\-icmp \-h +.fi diff --git a/extensions/libip6t_ipv6header.c b/extensions/libip6t_ipv6header.c new file mode 100644 index 0000000..00d5d5b --- /dev/null +++ b/extensions/libip6t_ipv6header.c @@ -0,0 +1,245 @@ +/* ipv6header match - matches IPv6 packets based +on whether they contain certain headers */ + +/* Original idea: Brad Chapman + * Rewritten by: Andras Kis-Szabo */ +#include +#include +#include +#include +#include +#include +#include + +enum { + O_HEADER = 0, + O_SOFT, +}; + +/* A few hardcoded protocols for 'all' and in case the user has no + * /etc/protocols */ +struct pprot { + char *name; + uint8_t num; +}; + +struct numflag { + uint8_t proto; + uint8_t flag; +}; + +static const struct pprot chain_protos[] = { + { "hop-by-hop", IPPROTO_HOPOPTS }, + { "protocol", IPPROTO_RAW }, + { "hop", IPPROTO_HOPOPTS }, + { "dst", IPPROTO_DSTOPTS }, + { "route", IPPROTO_ROUTING }, + { "frag", IPPROTO_FRAGMENT }, + { "auth", IPPROTO_AH }, + { "esp", IPPROTO_ESP }, + { "none", IPPROTO_NONE }, + { "prot", IPPROTO_RAW }, + { "0", IPPROTO_HOPOPTS }, + { "60", IPPROTO_DSTOPTS }, + { "43", IPPROTO_ROUTING }, + { "44", IPPROTO_FRAGMENT }, + { "51", IPPROTO_AH }, + { "50", IPPROTO_ESP }, + { "59", IPPROTO_NONE }, + { "255", IPPROTO_RAW }, + /* { "all", 0 }, */ +}; + +static const struct numflag chain_flags[] = { + { IPPROTO_HOPOPTS, MASK_HOPOPTS }, + { IPPROTO_DSTOPTS, MASK_DSTOPTS }, + { IPPROTO_ROUTING, MASK_ROUTING }, + { IPPROTO_FRAGMENT, MASK_FRAGMENT }, + { IPPROTO_AH, MASK_AH }, + { IPPROTO_ESP, MASK_ESP }, + { IPPROTO_NONE, MASK_NONE }, + { IPPROTO_RAW, MASK_PROTO }, +}; + +static const char * +proto_to_name(uint8_t proto, int nolookup) +{ + unsigned int i; + + if (proto && !nolookup) { + const struct protoent *pent = getprotobynumber(proto); + if (pent) + return pent->p_name; + } + + for (i = 0; i < ARRAY_SIZE(chain_protos); ++i) + if (chain_protos[i].num == proto) + return chain_protos[i].name; + + return NULL; +} + +static uint16_t +name_to_proto(const char *s) +{ + unsigned int proto=0; + const struct protoent *pent; + + if ((pent = getprotobyname(s))) + proto = pent->p_proto; + else { + unsigned int i; + for (i = 0; i < ARRAY_SIZE(chain_protos); ++i) + if (strcmp(s, chain_protos[i].name) == 0) { + proto = chain_protos[i].num; + break; + } + + if (i == ARRAY_SIZE(chain_protos)) + xtables_error(PARAMETER_PROBLEM, + "unknown header `%s' specified", + s); + } + + return proto; +} + +static unsigned int +add_proto_to_mask(int proto){ + unsigned int i=0, flag=0; + + for (i = 0; i < ARRAY_SIZE(chain_flags); ++i) + if (proto == chain_flags[i].proto){ + flag = chain_flags[i].flag; + break; + } + + if (i == ARRAY_SIZE(chain_flags)) + xtables_error(PARAMETER_PROBLEM, + "unknown header `%d' specified", + proto); + + return flag; +} + +static void ipv6header_help(void) +{ + printf( +"ipv6header match options:\n" +"[!] --header headers Type of header to match, by name\n" +" names: hop,dst,route,frag,auth,esp,none,proto\n" +" long names: hop-by-hop,ipv6-opts,ipv6-route,\n" +" ipv6-frag,ah,esp,ipv6-nonxt,protocol\n" +" numbers: 0,60,43,44,51,50,59\n" +"--soft The header CONTAINS the specified extensions\n"); +} + +static const struct xt_option_entry ipv6header_opts[] = { + {.name = "header", .id = O_HEADER, .type = XTTYPE_STRING, + .flags = XTOPT_MAND | XTOPT_INVERT}, + {.name = "soft", .id = O_SOFT, .type = XTTYPE_NONE}, + XTOPT_TABLEEND, +}; + +static unsigned int +parse_header(const char *flags) { + unsigned int ret = 0; + char *ptr; + char *buffer; + + buffer = strdup(flags); + + for (ptr = strtok(buffer, ","); ptr; ptr = strtok(NULL, ",")) + ret |= add_proto_to_mask(name_to_proto(ptr)); + + free(buffer); + return ret; +} + +static void ipv6header_parse(struct xt_option_call *cb) +{ + struct ip6t_ipv6header_info *info = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_HEADER: + if (!(info->matchflags = parse_header(cb->arg))) + xtables_error(PARAMETER_PROBLEM, "ip6t_ipv6header: cannot parse header names"); + if (cb->invert) + info->invflags |= 0xFF; + break; + case O_SOFT: + info->modeflag |= 0xFF; + break; + } +} + +static void +print_header(uint8_t flags){ + int have_flag = 0; + + while (flags) { + unsigned int i; + + for (i = 0; (flags & chain_flags[i].flag) == 0; i++); + + if (have_flag) + printf(","); + + printf("%s", proto_to_name(chain_flags[i].proto,0)); + have_flag = 1; + + flags &= ~chain_flags[i].flag; + } + + if (!have_flag) + printf("NONE"); +} + +static void ipv6header_print(const void *ip, + const struct xt_entry_match *match, int numeric) +{ + const struct ip6t_ipv6header_info *info = (const struct ip6t_ipv6header_info *)match->data; + printf(" ipv6header"); + + if (info->matchflags || info->invflags) { + printf(" flags:%s", info->invflags ? "!" : ""); + if (numeric) + printf("0x%02X", info->matchflags); + else { + print_header(info->matchflags); + } + } + + if (info->modeflag) + printf(" soft"); +} + +static void ipv6header_save(const void *ip, const struct xt_entry_match *match) +{ + + const struct ip6t_ipv6header_info *info = (const struct ip6t_ipv6header_info *)match->data; + + printf("%s --header ", info->invflags ? " !" : ""); + print_header(info->matchflags); + if (info->modeflag) + printf(" --soft"); +} + +static struct xtables_match ipv6header_mt6_reg = { + .name = "ipv6header", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV6, + .size = XT_ALIGN(sizeof(struct ip6t_ipv6header_info)), + .userspacesize = XT_ALIGN(sizeof(struct ip6t_ipv6header_info)), + .help = ipv6header_help, + .print = ipv6header_print, + .save = ipv6header_save, + .x6_parse = ipv6header_parse, + .x6_options = ipv6header_opts, +}; + +void _init(void) +{ + xtables_register_match(&ipv6header_mt6_reg); +} diff --git a/extensions/libip6t_ipv6header.man b/extensions/libip6t_ipv6header.man new file mode 100644 index 0000000..a998861 --- /dev/null +++ b/extensions/libip6t_ipv6header.man @@ -0,0 +1,37 @@ +This module matches IPv6 extension headers and/or upper layer header. +.TP +\fB\-\-soft\fP +Matches if the packet includes \fBany\fP of the headers specified with +\fB\-\-header\fP. +.TP +[\fB!\fP] \fB\-\-header\fP \fIheader\fP[\fB,\fP\fIheader\fP...] +Matches the packet which EXACTLY includes all specified headers. The headers +encapsulated with ESP header are out of scope. +Possible \fIheader\fP types can be: +.TP +\fBhop\fP|\fBhop\-by\-hop\fP +Hop-by-Hop Options header +.TP +\fBdst\fP +Destination Options header +.TP +\fBroute\fP +Routing header +.TP +\fBfrag\fP +Fragment header +.TP +\fBauth\fP +Authentication header +.TP +\fBesp\fP +Encapsulating Security Payload header +.TP +\fBnone\fP +No Next header which matches 59 in the 'Next Header field' of IPv6 header or +any IPv6 extension headers +.TP +\fBproto\fP +which matches any upper layer protocol header. A protocol name from +/etc/protocols and numeric value also allowed. The number 255 is equivalent to +\fBproto\fP. diff --git a/extensions/libip6t_mh.c b/extensions/libip6t_mh.c new file mode 100644 index 0000000..686a293 --- /dev/null +++ b/extensions/libip6t_mh.c @@ -0,0 +1,228 @@ +/* Shared library add-on to ip6tables to add mobility header support. */ +/* + * Copyright (C)2006 USAGI/WIDE Project + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Author: + * Masahide NAKAMURA @USAGI + * + * Based on libip6t_{icmpv6,udp}.c + */ +#include +#include +#include +#include +#include +#include + +enum { + O_MH_TYPE = 0, +}; + +struct mh_name { + const char *name; + uint8_t type; +}; + +static const struct mh_name mh_names[] = { + { "binding-refresh-request", 0, }, + /* Alias */ { "brr", 0, }, + { "home-test-init", 1, }, + /* Alias */ { "hoti", 1, }, + { "careof-test-init", 2, }, + /* Alias */ { "coti", 2, }, + { "home-test", 3, }, + /* Alias */ { "hot", 3, }, + { "careof-test", 4, }, + /* Alias */ { "cot", 4, }, + { "binding-update", 5, }, + /* Alias */ { "bu", 5, }, + { "binding-acknowledgement", 6, }, + /* Alias */ { "ba", 6, }, + { "binding-error", 7, }, + /* Alias */ { "be", 7, }, +}; + +static void print_types_all(void) +{ + unsigned int i; + printf("Valid MH types:"); + + for (i = 0; i < ARRAY_SIZE(mh_names); ++i) { + if (i && mh_names[i].type == mh_names[i-1].type) + printf(" (%s)", mh_names[i].name); + else + printf("\n%s", mh_names[i].name); + } + printf("\n"); +} + +static void mh_help(void) +{ + printf( +"mh match options:\n" +"[!] --mh-type type[:type] match mh type\n"); + print_types_all(); +} + +static void mh_init(struct xt_entry_match *m) +{ + struct ip6t_mh *mhinfo = (struct ip6t_mh *)m->data; + + mhinfo->types[1] = 0xFF; +} + +static unsigned int name_to_type(const char *name) +{ + int namelen = strlen(name); + static const unsigned int limit = ARRAY_SIZE(mh_names); + unsigned int match = limit; + unsigned int i; + + for (i = 0; i < limit; i++) { + if (strncasecmp(mh_names[i].name, name, namelen) == 0) { + int len = strlen(mh_names[i].name); + if (match == limit || len == namelen) + match = i; + } + } + + if (match != limit) { + return mh_names[match].type; + } else { + unsigned int number; + + if (!xtables_strtoui(name, NULL, &number, 0, UINT8_MAX)) + xtables_error(PARAMETER_PROBLEM, + "Invalid MH type `%s'\n", name); + return number; + } +} + +static void parse_mh_types(const char *mhtype, uint8_t *types) +{ + char *buffer; + char *cp; + + buffer = strdup(mhtype); + if ((cp = strchr(buffer, ':')) == NULL) + types[0] = types[1] = name_to_type(buffer); + else { + *cp = '\0'; + cp++; + + types[0] = buffer[0] ? name_to_type(buffer) : 0; + types[1] = cp[0] ? name_to_type(cp) : 0xFF; + + if (types[0] > types[1]) + xtables_error(PARAMETER_PROBLEM, + "Invalid MH type range (min > max)"); + } + free(buffer); +} + +static void mh_parse(struct xt_option_call *cb) +{ + struct ip6t_mh *mhinfo = cb->data; + + xtables_option_parse(cb); + parse_mh_types(cb->arg, mhinfo->types); + if (cb->invert) + mhinfo->invflags |= IP6T_MH_INV_TYPE; +} + +static const char *type_to_name(uint8_t type) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(mh_names); ++i) + if (mh_names[i].type == type) + return mh_names[i].name; + + return NULL; +} + +static void print_type(uint8_t type, int numeric) +{ + const char *name; + if (numeric || !(name = type_to_name(type))) + printf("%u", type); + else + printf("%s", name); +} + +static void print_types(uint8_t min, uint8_t max, int invert, int numeric) +{ + const char *inv = invert ? "!" : ""; + + if (min != 0 || max != 0xFF || invert) { + printf(" "); + if (min == max) { + printf("%s", inv); + print_type(min, numeric); + } else { + printf("%s", inv); + print_type(min, numeric); + printf(":"); + print_type(max, numeric); + } + } +} + +static void mh_print(const void *ip, const struct xt_entry_match *match, + int numeric) +{ + const struct ip6t_mh *mhinfo = (struct ip6t_mh *)match->data; + + printf(" mh"); + print_types(mhinfo->types[0], mhinfo->types[1], + mhinfo->invflags & IP6T_MH_INV_TYPE, + numeric); + if (mhinfo->invflags & ~IP6T_MH_INV_MASK) + printf(" Unknown invflags: 0x%X", + mhinfo->invflags & ~IP6T_MH_INV_MASK); +} + +static void mh_save(const void *ip, const struct xt_entry_match *match) +{ + const struct ip6t_mh *mhinfo = (struct ip6t_mh *)match->data; + + if (mhinfo->types[0] == 0 && mhinfo->types[1] == 0xFF) + return; + + if (mhinfo->invflags & IP6T_MH_INV_TYPE) + printf(" !"); + + if (mhinfo->types[0] != mhinfo->types[1]) + printf(" --mh-type %u:%u", mhinfo->types[0], mhinfo->types[1]); + else + printf(" --mh-type %u", mhinfo->types[0]); +} + +static const struct xt_option_entry mh_opts[] = { + {.name = "mh-type", .id = O_MH_TYPE, .type = XTTYPE_STRING, + .flags = XTOPT_INVERT}, + XTOPT_TABLEEND, +}; + +static struct xtables_match mh_mt6_reg = { + .name = "mh", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV6, + .size = XT_ALIGN(sizeof(struct ip6t_mh)), + .userspacesize = XT_ALIGN(sizeof(struct ip6t_mh)), + .help = mh_help, + .init = mh_init, + .x6_parse = mh_parse, + .print = mh_print, + .save = mh_save, + .x6_options = mh_opts, +}; + +void _init(void) +{ + xtables_register_match(&mh_mt6_reg); +} diff --git a/extensions/libip6t_mh.man b/extensions/libip6t_mh.man new file mode 100644 index 0000000..4559e78 --- /dev/null +++ b/extensions/libip6t_mh.man @@ -0,0 +1,12 @@ +This extension is loaded if `\-\-protocol ipv6\-mh' or `\-\-protocol mh' is +specified. It provides the following option: +.TP +[\fB!\fP] \fB\-\-mh\-type\fP \fItype\fP[\fB:\fP\fItype\fP] +This allows specification of the Mobility Header(MH) type, which can be +a numeric MH +.IR type , +.IR type +or one of the MH type names shown by the command +.nf + ip6tables \-p ipv6\-mh \-h +.fi diff --git a/extensions/libip6t_rt.c b/extensions/libip6t_rt.c new file mode 100644 index 0000000..d470488 --- /dev/null +++ b/extensions/libip6t_rt.c @@ -0,0 +1,258 @@ +#include +#include +#include +#include +#include +#include + +enum { + O_RT_TYPE = 0, + O_RT_SEGSLEFT, + O_RT_LEN, + O_RT0RES, + O_RT0ADDRS, + O_RT0NSTRICT, + F_RT_TYPE = 1 << O_RT_TYPE, + F_RT0ADDRS = 1 << O_RT0ADDRS, +}; + +static void rt_help(void) +{ + printf( +"rt match options:\n" +"[!] --rt-type type match the type\n" +"[!] --rt-segsleft num[:num] match the Segments Left field (range)\n" +"[!] --rt-len length total length of this header\n" +" --rt-0-res check the reserved field too (type 0)\n" +" --rt-0-addrs ADDR[,ADDR...] Type=0 addresses (list, max: %d)\n" +" --rt-0-not-strict List of Type=0 addresses not a strict list\n", +IP6T_RT_HOPS); +} + +#define s struct ip6t_rt +static const struct xt_option_entry rt_opts[] = { + {.name = "rt-type", .id = O_RT_TYPE, .type = XTTYPE_UINT32, + .flags = XTOPT_INVERT | XTOPT_PUT, XTOPT_POINTER(s, rt_type)}, + {.name = "rt-segsleft", .id = O_RT_SEGSLEFT, .type = XTTYPE_UINT32RC, + .flags = XTOPT_INVERT | XTOPT_PUT, XTOPT_POINTER(s, segsleft)}, + {.name = "rt-len", .id = O_RT_LEN, .type = XTTYPE_UINT32, + .flags = XTOPT_INVERT | XTOPT_PUT, XTOPT_POINTER(s, hdrlen)}, + {.name = "rt-0-res", .id = O_RT0RES, .type = XTTYPE_NONE}, + {.name = "rt-0-addrs", .id = O_RT0ADDRS, .type = XTTYPE_STRING}, + {.name = "rt-0-not-strict", .id = O_RT0NSTRICT, .type = XTTYPE_NONE}, + XTOPT_TABLEEND, +}; +#undef s + +static const char * +addr_to_numeric(const struct in6_addr *addrp) +{ + static char buf[50+1]; + return inet_ntop(AF_INET6, addrp, buf, sizeof(buf)); +} + +static struct in6_addr * +numeric_to_addr(const char *num) +{ + static struct in6_addr ap; + int err; + + if ((err=inet_pton(AF_INET6, num, &ap)) == 1) + return ≈ +#ifdef DEBUG + fprintf(stderr, "\nnumeric2addr: %d\n", err); +#endif + xtables_error(PARAMETER_PROBLEM, "bad address: %s", num); + + return (struct in6_addr *)NULL; +} + + +static int +parse_addresses(const char *addrstr, struct in6_addr *addrp) +{ + char *buffer, *cp, *next; + unsigned int i; + + buffer = strdup(addrstr); + if (!buffer) xtables_error(OTHER_PROBLEM, "strdup failed"); + + for (cp=buffer, i=0; cp && idata; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_RT_TYPE: + if (cb->invert) + rtinfo->invflags |= IP6T_RT_INV_TYP; + rtinfo->flags |= IP6T_RT_TYP; + break; + case O_RT_SEGSLEFT: + if (cb->nvals == 1) + rtinfo->segsleft[1] = rtinfo->segsleft[0]; + if (cb->invert) + rtinfo->invflags |= IP6T_RT_INV_SGS; + rtinfo->flags |= IP6T_RT_SGS; + break; + case O_RT_LEN: + if (cb->invert) + rtinfo->invflags |= IP6T_RT_INV_LEN; + rtinfo->flags |= IP6T_RT_LEN; + break; + case O_RT0RES: + if (!(cb->xflags & F_RT_TYPE) || rtinfo->rt_type != 0 || + rtinfo->invflags & IP6T_RT_INV_TYP) + xtables_error(PARAMETER_PROBLEM, + "`--rt-type 0' required before `--rt-0-res'"); + rtinfo->flags |= IP6T_RT_RES; + break; + case O_RT0ADDRS: + if (!(cb->xflags & F_RT_TYPE) || rtinfo->rt_type != 0 || + rtinfo->invflags & IP6T_RT_INV_TYP) + xtables_error(PARAMETER_PROBLEM, + "`--rt-type 0' required before `--rt-0-addrs'"); + rtinfo->addrnr = parse_addresses(cb->arg, rtinfo->addrs); + rtinfo->flags |= IP6T_RT_FST; + break; + case O_RT0NSTRICT: + if (!(cb->xflags & F_RT0ADDRS)) + xtables_error(PARAMETER_PROBLEM, + "`--rt-0-addr ...' required before `--rt-0-not-strict'"); + rtinfo->flags |= IP6T_RT_FST_NSTRICT; + break; + } +} + +static void +print_nums(const char *name, uint32_t min, uint32_t max, + int invert) +{ + const char *inv = invert ? "!" : ""; + + if (min != 0 || max != 0xFFFFFFFF || invert) { + printf(" %s", name); + if (min == max) { + printf(":%s", inv); + printf("%u", min); + } else { + printf("s:%s", inv); + printf("%u",min); + printf(":"); + printf("%u",max); + } + } +} + +static void +print_addresses(unsigned int addrnr, struct in6_addr *addrp) +{ + unsigned int i; + + for(i=0; idata; + + printf(" rt"); + if (rtinfo->flags & IP6T_RT_TYP) + printf(" type:%s%d", rtinfo->invflags & IP6T_RT_INV_TYP ? "!" : "", + rtinfo->rt_type); + print_nums("segsleft", rtinfo->segsleft[0], rtinfo->segsleft[1], + rtinfo->invflags & IP6T_RT_INV_SGS); + if (rtinfo->flags & IP6T_RT_LEN) { + printf(" length"); + printf(":%s", rtinfo->invflags & IP6T_RT_INV_LEN ? "!" : ""); + printf("%u", rtinfo->hdrlen); + } + if (rtinfo->flags & IP6T_RT_RES) printf(" reserved"); + if (rtinfo->flags & IP6T_RT_FST) printf(" 0-addrs"); + print_addresses(rtinfo->addrnr, (struct in6_addr *)rtinfo->addrs); + if (rtinfo->flags & IP6T_RT_FST_NSTRICT) printf(" 0-not-strict"); + if (rtinfo->invflags & ~IP6T_RT_INV_MASK) + printf(" Unknown invflags: 0x%X", + rtinfo->invflags & ~IP6T_RT_INV_MASK); +} + +static void rt_save(const void *ip, const struct xt_entry_match *match) +{ + const struct ip6t_rt *rtinfo = (struct ip6t_rt *)match->data; + + if (rtinfo->flags & IP6T_RT_TYP) { + printf("%s --rt-type %u", + (rtinfo->invflags & IP6T_RT_INV_TYP) ? " !" : "", + rtinfo->rt_type); + } + + if (!(rtinfo->segsleft[0] == 0 + && rtinfo->segsleft[1] == 0xFFFFFFFF)) { + printf("%s --rt-segsleft ", + (rtinfo->invflags & IP6T_RT_INV_SGS) ? " !" : ""); + if (rtinfo->segsleft[0] + != rtinfo->segsleft[1]) + printf("%u:%u", + rtinfo->segsleft[0], + rtinfo->segsleft[1]); + else + printf("%u", + rtinfo->segsleft[0]); + } + + if (rtinfo->flags & IP6T_RT_LEN) { + printf("%s --rt-len %u", + (rtinfo->invflags & IP6T_RT_INV_LEN) ? " !" : "", + rtinfo->hdrlen); + } + + if (rtinfo->flags & IP6T_RT_RES) printf(" --rt-0-res"); + if (rtinfo->flags & IP6T_RT_FST) printf(" --rt-0-addrs"); + print_addresses(rtinfo->addrnr, (struct in6_addr *)rtinfo->addrs); + if (rtinfo->flags & IP6T_RT_FST_NSTRICT) printf(" --rt-0-not-strict"); + +} + +static struct xtables_match rt_mt6_reg = { + .name = "rt", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV6, + .size = XT_ALIGN(sizeof(struct ip6t_rt)), + .userspacesize = XT_ALIGN(sizeof(struct ip6t_rt)), + .help = rt_help, + .x6_parse = rt_parse, + .print = rt_print, + .save = rt_save, + .x6_options = rt_opts, +}; + +void +_init(void) +{ + xtables_register_match(&rt_mt6_reg); +} diff --git a/extensions/libip6t_rt.man b/extensions/libip6t_rt.man new file mode 100644 index 0000000..0443e0a --- /dev/null +++ b/extensions/libip6t_rt.man @@ -0,0 +1,19 @@ +Match on IPv6 routing header +.TP +[\fB!\fP] \fB\-\-rt\-type\fP \fItype\fP +Match the type (numeric). +.TP +[\fB!\fP] \fB\-\-rt\-segsleft\fP \fInum\fP[\fB:\fP\fInum\fP] +Match the `segments left' field (range). +.TP +[\fB!\fP] \fB\-\-rt\-len\fP \fIlength\fP +Match the length of this header. +.TP +\fB\-\-rt\-0\-res\fP +Match the reserved field, too (type=0) +.TP +\fB\-\-rt\-0\-addrs\fP \fIaddr\fP[\fB,\fP\fIaddr\fP...] +Match type=0 addresses (list). +.TP +\fB\-\-rt\-0\-not\-strict\fP +List of type=0 addresses is not a strict list. diff --git a/extensions/libipt_CLUSTERIP.c b/extensions/libipt_CLUSTERIP.c new file mode 100644 index 0000000..f4b638b --- /dev/null +++ b/extensions/libipt_CLUSTERIP.c @@ -0,0 +1,195 @@ +/* Shared library add-on to iptables to add CLUSTERIP target support. + * (C) 2003 by Harald Welte + * + * Development of this code was funded by SuSE AG, http://www.suse.com/ + */ +#include +#include +#include +#include +#include +#include + +#if defined(__GLIBC__) && __GLIBC__ == 2 +#include +#else +#include +#endif + +#include +#include + +enum { + O_NEW = 0, + O_HASHMODE, + O_CLUSTERMAC, + O_TOTAL_NODES, + O_LOCAL_NODE, + O_HASH_INIT, + F_NEW = 1 << O_NEW, + F_HASHMODE = 1 << O_HASHMODE, + F_CLUSTERMAC = 1 << O_CLUSTERMAC, + F_TOTAL_NODES = 1 << O_TOTAL_NODES, + F_LOCAL_NODE = 1 << O_LOCAL_NODE, + F_FULL = F_NEW | F_HASHMODE | F_CLUSTERMAC | + F_TOTAL_NODES | F_LOCAL_NODE, +}; + +static void CLUSTERIP_help(void) +{ + printf( +"CLUSTERIP target options:\n" +" --new Create a new ClusterIP\n" +" --hashmode Specify hashing mode\n" +" sourceip\n" +" sourceip-sourceport\n" +" sourceip-sourceport-destport\n" +" --clustermac Set clusterIP MAC address\n" +" --total-nodes Set number of total nodes in cluster\n" +" --local-node Set the local node number\n" +" --hash-init Set init value of the Jenkins hash\n"); +} + +#define s struct ipt_clusterip_tgt_info +static const struct xt_option_entry CLUSTERIP_opts[] = { + {.name = "new", .id = O_NEW, .type = XTTYPE_NONE}, + {.name = "hashmode", .id = O_HASHMODE, .type = XTTYPE_STRING, + .also = O_NEW}, + {.name = "clustermac", .id = O_CLUSTERMAC, .type = XTTYPE_ETHERMAC, + .also = O_NEW, .flags = XTOPT_PUT, XTOPT_POINTER(s, clustermac)}, + {.name = "total-nodes", .id = O_TOTAL_NODES, .type = XTTYPE_UINT16, + .flags = XTOPT_PUT, XTOPT_POINTER(s, num_total_nodes), + .also = O_NEW, .max = CLUSTERIP_MAX_NODES}, + {.name = "local-node", .id = O_LOCAL_NODE, .type = XTTYPE_UINT16, + .flags = XTOPT_PUT, XTOPT_POINTER(s, local_nodes[0]), + .also = O_NEW, .max = CLUSTERIP_MAX_NODES}, + {.name = "hash-init", .id = O_HASH_INIT, .type = XTTYPE_UINT32, + .flags = XTOPT_PUT, XTOPT_POINTER(s, hash_initval), + .also = O_NEW, .max = UINT_MAX}, + XTOPT_TABLEEND, +}; +#undef s + +static void CLUSTERIP_parse(struct xt_option_call *cb) +{ + struct ipt_clusterip_tgt_info *cipinfo = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_NEW: + cipinfo->flags |= CLUSTERIP_FLAG_NEW; + break; + case O_HASHMODE: + if (strcmp(cb->arg, "sourceip") == 0) + cipinfo->hash_mode = CLUSTERIP_HASHMODE_SIP; + else if (strcmp(cb->arg, "sourceip-sourceport") == 0) + cipinfo->hash_mode = CLUSTERIP_HASHMODE_SIP_SPT; + else if (strcmp(cb->arg, "sourceip-sourceport-destport") == 0) + cipinfo->hash_mode = CLUSTERIP_HASHMODE_SIP_SPT_DPT; + else + xtables_error(PARAMETER_PROBLEM, "Unknown hashmode \"%s\"\n", + cb->arg); + break; + case O_CLUSTERMAC: + if (!(cipinfo->clustermac[0] & 0x01)) + xtables_error(PARAMETER_PROBLEM, "MAC has to be a multicast ethernet address\n"); + break; + case O_LOCAL_NODE: + cipinfo->num_local_nodes = 1; + break; + } +} + +static void CLUSTERIP_check(struct xt_fcheck_call *cb) +{ + if (cb->xflags == 0) + return; + if ((cb->xflags & F_FULL) == F_FULL) + return; + + xtables_error(PARAMETER_PROBLEM, "CLUSTERIP target: Invalid parameter combination\n"); +} + +static const char *hashmode2str(enum clusterip_hashmode mode) +{ + const char *retstr; + switch (mode) { + case CLUSTERIP_HASHMODE_SIP: + retstr = "sourceip"; + break; + case CLUSTERIP_HASHMODE_SIP_SPT: + retstr = "sourceip-sourceport"; + break; + case CLUSTERIP_HASHMODE_SIP_SPT_DPT: + retstr = "sourceip-sourceport-destport"; + break; + default: + retstr = "unknown-error"; + break; + } + return retstr; +} + +static const char *mac2str(const uint8_t mac[ETH_ALEN]) +{ + static char buf[ETH_ALEN*3]; + sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X", + mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); + return buf; +} + +static void CLUSTERIP_print(const void *ip, + const struct xt_entry_target *target, int numeric) +{ + const struct ipt_clusterip_tgt_info *cipinfo = + (const struct ipt_clusterip_tgt_info *)target->data; + + if (!(cipinfo->flags & CLUSTERIP_FLAG_NEW)) { + printf(" CLUSTERIP"); + return; + } + + printf(" CLUSTERIP hashmode=%s clustermac=%s total_nodes=%u local_node=%u hash_init=%u", + hashmode2str(cipinfo->hash_mode), + mac2str(cipinfo->clustermac), + cipinfo->num_total_nodes, + cipinfo->local_nodes[0], + cipinfo->hash_initval); +} + +static void CLUSTERIP_save(const void *ip, const struct xt_entry_target *target) +{ + const struct ipt_clusterip_tgt_info *cipinfo = + (const struct ipt_clusterip_tgt_info *)target->data; + + /* if this is not a new entry, we don't need to save target + * parameters */ + if (!(cipinfo->flags & CLUSTERIP_FLAG_NEW)) + return; + + printf(" --new --hashmode %s --clustermac %s --total-nodes %d --local-node %d --hash-init %u", + hashmode2str(cipinfo->hash_mode), + mac2str(cipinfo->clustermac), + cipinfo->num_total_nodes, + cipinfo->local_nodes[0], + cipinfo->hash_initval); +} + +static struct xtables_target clusterip_tg_reg = { + .name = "CLUSTERIP", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(sizeof(struct ipt_clusterip_tgt_info)), + .userspacesize = offsetof(struct ipt_clusterip_tgt_info, config), + .help = CLUSTERIP_help, + .x6_parse = CLUSTERIP_parse, + .x6_fcheck = CLUSTERIP_check, + .print = CLUSTERIP_print, + .save = CLUSTERIP_save, + .x6_options = CLUSTERIP_opts, +}; + +void _init(void) +{ + xtables_register_target(&clusterip_tg_reg); +} diff --git a/extensions/libipt_CLUSTERIP.man b/extensions/libipt_CLUSTERIP.man new file mode 100644 index 0000000..8ec6d6b --- /dev/null +++ b/extensions/libipt_CLUSTERIP.man @@ -0,0 +1,24 @@ +This module allows you to configure a simple cluster of nodes that share +a certain IP and MAC address without an explicit load balancer in front of +them. Connections are statically distributed between the nodes in this +cluster. +.TP +\fB\-\-new\fP +Create a new ClusterIP. You always have to set this on the first rule +for a given ClusterIP. +.TP +\fB\-\-hashmode\fP \fImode\fP +Specify the hashing mode. Has to be one of +\fBsourceip\fP, \fBsourceip\-sourceport\fP, \fBsourceip\-sourceport\-destport\fP. +.TP +\fB\-\-clustermac\fP \fImac\fP +Specify the ClusterIP MAC address. Has to be a link\-layer multicast address +.TP +\fB\-\-total\-nodes\fP \fInum\fP +Number of total nodes within this cluster. +.TP +\fB\-\-local\-node\fP \fInum\fP +Local node number within this cluster. +.TP +\fB\-\-hash\-init\fP \fIrnd\fP +Specify the random seed used for hash initialization. diff --git a/extensions/libipt_DNAT.c b/extensions/libipt_DNAT.c new file mode 100644 index 0000000..466c9de --- /dev/null +++ b/extensions/libipt_DNAT.c @@ -0,0 +1,262 @@ +#include +#include +#include +#include +#include +#include /* get_kernel_version */ +#include /* INT_MAX in ip_tables.h */ +#include +#include + +enum { + O_TO_DEST = 0, + O_RANDOM, + O_PERSISTENT, + O_X_TO_DEST, /* hidden flag */ + F_TO_DEST = 1 << O_TO_DEST, + F_RANDOM = 1 << O_RANDOM, + F_X_TO_DEST = 1 << O_X_TO_DEST, +}; + +/* Dest NAT data consists of a multi-range, indicating where to map + to. */ +struct ipt_natinfo +{ + struct xt_entry_target t; + struct nf_nat_multi_range mr; +}; + +static void DNAT_help(void) +{ + printf( +"DNAT target options:\n" +" --to-destination [[-]][:port[-port]]\n" +" Address to map destination to.\n" +"[--random] [--persistent]\n"); +} + +static const struct xt_option_entry DNAT_opts[] = { + {.name = "to-destination", .id = O_TO_DEST, .type = XTTYPE_STRING, + .flags = XTOPT_MAND | XTOPT_MULTI}, + {.name = "random", .id = O_RANDOM, .type = XTTYPE_NONE}, + {.name = "persistent", .id = O_PERSISTENT, .type = XTTYPE_NONE}, + XTOPT_TABLEEND, +}; + +static struct ipt_natinfo * +append_range(struct ipt_natinfo *info, const struct nf_nat_range *range) +{ + unsigned int size; + + /* One rangesize already in struct ipt_natinfo */ + size = XT_ALIGN(sizeof(*info) + info->mr.rangesize * sizeof(*range)); + + info = realloc(info, size); + if (!info) + xtables_error(OTHER_PROBLEM, "Out of memory\n"); + + info->t.u.target_size = size; + info->mr.range[info->mr.rangesize] = *range; + info->mr.rangesize++; + + return info; +} + +/* Ranges expected in network order. */ +static struct xt_entry_target * +parse_to(const char *orig_arg, int portok, struct ipt_natinfo *info) +{ + struct nf_nat_range range; + char *arg, *colon, *dash, *error; + const struct in_addr *ip; + + arg = strdup(orig_arg); + if (arg == NULL) + xtables_error(RESOURCE_PROBLEM, "strdup"); + memset(&range, 0, sizeof(range)); + colon = strchr(arg, ':'); + + if (colon) { + int port; + + if (!portok) + xtables_error(PARAMETER_PROBLEM, + "Need TCP, UDP, SCTP or DCCP with port specification"); + + range.flags |= IP_NAT_RANGE_PROTO_SPECIFIED; + + port = atoi(colon+1); + if (port <= 0 || port > 65535) + xtables_error(PARAMETER_PROBLEM, + "Port `%s' not valid\n", colon+1); + + error = strchr(colon+1, ':'); + if (error) + xtables_error(PARAMETER_PROBLEM, + "Invalid port:port syntax - use dash\n"); + + dash = strchr(colon, '-'); + if (!dash) { + range.min.tcp.port + = range.max.tcp.port + = htons(port); + } else { + int maxport; + + maxport = atoi(dash + 1); + if (maxport <= 0 || maxport > 65535) + xtables_error(PARAMETER_PROBLEM, + "Port `%s' not valid\n", dash+1); + if (maxport < port) + /* People are stupid. */ + xtables_error(PARAMETER_PROBLEM, + "Port range `%s' funky\n", colon+1); + range.min.tcp.port = htons(port); + range.max.tcp.port = htons(maxport); + } + /* Starts with a colon? No IP info...*/ + if (colon == arg) { + free(arg); + return &(append_range(info, &range)->t); + } + *colon = '\0'; + } + + range.flags |= IP_NAT_RANGE_MAP_IPS; + dash = strchr(arg, '-'); + if (colon && dash && dash > colon) + dash = NULL; + + if (dash) + *dash = '\0'; + + ip = xtables_numeric_to_ipaddr(arg); + if (!ip) + xtables_error(PARAMETER_PROBLEM, "Bad IP address \"%s\"\n", + arg); + range.min_ip = ip->s_addr; + if (dash) { + ip = xtables_numeric_to_ipaddr(dash+1); + if (!ip) + xtables_error(PARAMETER_PROBLEM, "Bad IP address \"%s\"\n", + dash+1); + range.max_ip = ip->s_addr; + } else + range.max_ip = range.min_ip; + + free(arg); + return &(append_range(info, &range)->t); +} + +static void DNAT_parse(struct xt_option_call *cb) +{ + const struct ipt_entry *entry = cb->xt_entry; + struct ipt_natinfo *info = (void *)(*cb->target); + int portok; + + if (entry->ip.proto == IPPROTO_TCP + || entry->ip.proto == IPPROTO_UDP + || entry->ip.proto == IPPROTO_SCTP + || entry->ip.proto == IPPROTO_DCCP + || entry->ip.proto == IPPROTO_ICMP) + portok = 1; + else + portok = 0; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_TO_DEST: + if (cb->xflags & F_X_TO_DEST) { + if (!kernel_version) + get_kernel_version(); + if (kernel_version > LINUX_VERSION(2, 6, 10)) + xtables_error(PARAMETER_PROBLEM, + "DNAT: Multiple --to-destination not supported"); + } + *cb->target = parse_to(cb->arg, portok, info); + cb->xflags |= F_X_TO_DEST; + break; + case O_PERSISTENT: + info->mr.range[0].flags |= IP_NAT_RANGE_PERSISTENT; + break; + } +} + +static void DNAT_fcheck(struct xt_fcheck_call *cb) +{ + static const unsigned int f = F_TO_DEST | F_RANDOM; + struct nf_nat_multi_range *mr = cb->data; + + if ((cb->xflags & f) == f) + mr->range[0].flags |= IP_NAT_RANGE_PROTO_RANDOM; +} + +static void print_range(const struct nf_nat_range *r) +{ + if (r->flags & IP_NAT_RANGE_MAP_IPS) { + struct in_addr a; + + a.s_addr = r->min_ip; + printf("%s", xtables_ipaddr_to_numeric(&a)); + if (r->max_ip != r->min_ip) { + a.s_addr = r->max_ip; + printf("-%s", xtables_ipaddr_to_numeric(&a)); + } + } + if (r->flags & IP_NAT_RANGE_PROTO_SPECIFIED) { + printf(":"); + printf("%hu", ntohs(r->min.tcp.port)); + if (r->max.tcp.port != r->min.tcp.port) + printf("-%hu", ntohs(r->max.tcp.port)); + } +} + +static void DNAT_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct ipt_natinfo *info = (const void *)target; + unsigned int i = 0; + + printf(" to:"); + for (i = 0; i < info->mr.rangesize; i++) { + print_range(&info->mr.range[i]); + if (info->mr.range[i].flags & IP_NAT_RANGE_PROTO_RANDOM) + printf(" random"); + if (info->mr.range[i].flags & IP_NAT_RANGE_PERSISTENT) + printf(" persistent"); + } +} + +static void DNAT_save(const void *ip, const struct xt_entry_target *target) +{ + const struct ipt_natinfo *info = (const void *)target; + unsigned int i = 0; + + for (i = 0; i < info->mr.rangesize; i++) { + printf(" --to-destination "); + print_range(&info->mr.range[i]); + if (info->mr.range[i].flags & IP_NAT_RANGE_PROTO_RANDOM) + printf(" --random"); + if (info->mr.range[i].flags & IP_NAT_RANGE_PERSISTENT) + printf(" --persistent"); + } +} + +static struct xtables_target dnat_tg_reg = { + .name = "DNAT", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(sizeof(struct nf_nat_multi_range)), + .userspacesize = XT_ALIGN(sizeof(struct nf_nat_multi_range)), + .help = DNAT_help, + .x6_parse = DNAT_parse, + .x6_fcheck = DNAT_fcheck, + .print = DNAT_print, + .save = DNAT_save, + .x6_options = DNAT_opts, +}; + +void _init(void) +{ + xtables_register_target(&dnat_tg_reg); +} diff --git a/extensions/libipt_DNAT.man b/extensions/libipt_DNAT.man new file mode 100644 index 0000000..d5ded35 --- /dev/null +++ b/extensions/libipt_DNAT.man @@ -0,0 +1,39 @@ +This target is only valid in the +.B nat +table, in the +.B PREROUTING +and +.B OUTPUT +chains, and user-defined chains which are only called from those +chains. It specifies that the destination address of the packet +should be modified (and all future packets in this connection will +also be mangled), and rules should cease being examined. It takes one +type of option: +.TP +\fB\-\-to\-destination\fP [\fIipaddr\fP[\fB\-\fP\fIipaddr\fP]][\fB:\fP\fIport\fP[\fB\-\fP\fIport\fP]] +which can specify a single new destination IP address, an inclusive +range of IP addresses, and optionally, a port range (which is only +valid if the rule also specifies +\fB\-p tcp\fP +or +\fB\-p udp\fP). +If no port range is specified, then the destination port will never be +modified. If no IP address is specified then only the destination port +will be modified. + +In Kernels up to 2.6.10 you can add several \-\-to\-destination options. For +those kernels, if you specify more than one destination address, either via an +address range or multiple \-\-to\-destination options, a simple round-robin (one +after another in cycle) load balancing takes place between these addresses. +Later Kernels (>= 2.6.11-rc1) don't have the ability to NAT to multiple ranges +anymore. +.TP +\fB\-\-random\fP +If option +\fB\-\-random\fP +is used then port mapping will be randomized (kernel >= 2.6.22). +.TP +\fB\-\-persistent\fP +Gives a client the same source-/destination-address for each connection. +This supersedes the SAME target. Support for persistent mappings is available +from 2.6.29-rc2. diff --git a/extensions/libipt_ECN.c b/extensions/libipt_ECN.c new file mode 100644 index 0000000..ee09f29 --- /dev/null +++ b/extensions/libipt_ECN.c @@ -0,0 +1,145 @@ +/* Shared library add-on to iptables for ECN, $Version$ + * + * (C) 2002 by Harald Welte + * + * This program is distributed under the terms of GNU GPL v2, 1991 + * + * libipt_ECN.c borrowed heavily from libipt_DSCP.c + */ +#include +#include +#include + +enum { + O_ECN_TCP_REMOVE = 0, + O_ECN_TCP_CWR, + O_ECN_TCP_ECE, + O_ECN_IP_ECT, + F_ECN_TCP_REMOVE = 1 << O_ECN_TCP_REMOVE, + F_ECN_TCP_CWR = 1 << O_ECN_TCP_CWR, + F_ECN_TCP_ECE = 1 << O_ECN_TCP_ECE, +}; + +static void ECN_help(void) +{ + printf( +"ECN target options\n" +" --ecn-tcp-remove Remove all ECN bits from TCP header\n"); +} + +#if 0 +"ECN target v%s EXPERIMENTAL options (use with extreme care!)\n" +" --ecn-ip-ect Set the IPv4 ECT codepoint (0 to 3)\n" +" --ecn-tcp-cwr Set the IPv4 CWR bit (0 or 1)\n" +" --ecn-tcp-ece Set the IPv4 ECE bit (0 or 1)\n", +#endif + +static const struct xt_option_entry ECN_opts[] = { + {.name = "ecn-tcp-remove", .id = O_ECN_TCP_REMOVE, .type = XTTYPE_NONE, + .excl = F_ECN_TCP_CWR | F_ECN_TCP_ECE}, + {.name = "ecn-tcp-cwr", .id = O_ECN_TCP_CWR, .type = XTTYPE_UINT8, + .min = 0, .max = 1, .excl = F_ECN_TCP_REMOVE}, + {.name = "ecn-tcp-ece", .id = O_ECN_TCP_ECE, .type = XTTYPE_UINT8, + .min = 0, .max = 1, .excl = F_ECN_TCP_REMOVE}, + {.name = "ecn-ip-ect", .id = O_ECN_IP_ECT, .type = XTTYPE_UINT8, + .min = 0, .max = 3}, + XTOPT_TABLEEND, +}; + +static void ECN_parse(struct xt_option_call *cb) +{ + struct ipt_ECN_info *einfo = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_ECN_TCP_REMOVE: + einfo->operation = IPT_ECN_OP_SET_ECE | IPT_ECN_OP_SET_CWR; + einfo->proto.tcp.ece = 0; + einfo->proto.tcp.cwr = 0; + break; + case O_ECN_TCP_CWR: + einfo->operation |= IPT_ECN_OP_SET_CWR; + einfo->proto.tcp.cwr = cb->val.u8; + break; + case O_ECN_TCP_ECE: + einfo->operation |= IPT_ECN_OP_SET_ECE; + einfo->proto.tcp.ece = cb->val.u8; + break; + case O_ECN_IP_ECT: + einfo->operation |= IPT_ECN_OP_SET_IP; + einfo->ip_ect = cb->val.u8; + break; + } +} + +static void ECN_check(struct xt_fcheck_call *cb) +{ + if (cb->xflags == 0) + xtables_error(PARAMETER_PROBLEM, + "ECN target: An operation is required"); +} + +static void ECN_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct ipt_ECN_info *einfo = + (const struct ipt_ECN_info *)target->data; + + printf(" ECN"); + + if (einfo->operation == (IPT_ECN_OP_SET_ECE|IPT_ECN_OP_SET_CWR) + && einfo->proto.tcp.ece == 0 + && einfo->proto.tcp.cwr == 0) + printf(" TCP remove"); + else { + if (einfo->operation & IPT_ECN_OP_SET_ECE) + printf(" ECE=%u", einfo->proto.tcp.ece); + + if (einfo->operation & IPT_ECN_OP_SET_CWR) + printf(" CWR=%u", einfo->proto.tcp.cwr); + + if (einfo->operation & IPT_ECN_OP_SET_IP) + printf(" ECT codepoint=%u", einfo->ip_ect); + } +} + +static void ECN_save(const void *ip, const struct xt_entry_target *target) +{ + const struct ipt_ECN_info *einfo = + (const struct ipt_ECN_info *)target->data; + + if (einfo->operation == (IPT_ECN_OP_SET_ECE|IPT_ECN_OP_SET_CWR) + && einfo->proto.tcp.ece == 0 + && einfo->proto.tcp.cwr == 0) + printf(" --ecn-tcp-remove"); + else { + + if (einfo->operation & IPT_ECN_OP_SET_ECE) + printf(" --ecn-tcp-ece %d", einfo->proto.tcp.ece); + + if (einfo->operation & IPT_ECN_OP_SET_CWR) + printf(" --ecn-tcp-cwr %d", einfo->proto.tcp.cwr); + + if (einfo->operation & IPT_ECN_OP_SET_IP) + printf(" --ecn-ip-ect %d", einfo->ip_ect); + } +} + +static struct xtables_target ecn_tg_reg = { + .name = "ECN", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(sizeof(struct ipt_ECN_info)), + .userspacesize = XT_ALIGN(sizeof(struct ipt_ECN_info)), + .help = ECN_help, + .print = ECN_print, + .save = ECN_save, + .x6_parse = ECN_parse, + .x6_fcheck = ECN_check, + .x6_options = ECN_opts, +}; + +void _init(void) +{ + xtables_register_target(&ecn_tg_reg); +} diff --git a/extensions/libipt_ECN.man b/extensions/libipt_ECN.man new file mode 100644 index 0000000..a9cbe10 --- /dev/null +++ b/extensions/libipt_ECN.man @@ -0,0 +1,7 @@ +This target allows to selectively work around known ECN blackholes. +It can only be used in the mangle table. +.TP +\fB\-\-ecn\-tcp\-remove\fP +Remove all ECN bits from the TCP header. Of course, it can only be used +in conjunction with +\fB\-p tcp\fP. diff --git a/extensions/libipt_LOG.c b/extensions/libipt_LOG.c new file mode 100644 index 0000000..77f16d1 --- /dev/null +++ b/extensions/libipt_LOG.c @@ -0,0 +1,186 @@ +#include +#include +#include +#include +#include + +#define LOG_DEFAULT_LEVEL LOG_WARNING + +#ifndef IPT_LOG_UID /* Old kernel */ +#define IPT_LOG_UID 0x08 /* Log UID owning local socket */ +#undef IPT_LOG_MASK +#define IPT_LOG_MASK 0x0f +#endif + +enum { + O_LOG_LEVEL = 0, + O_LOG_PREFIX, + O_LOG_TCPSEQ, + O_LOG_TCPOPTS, + O_LOG_IPOPTS, + O_LOG_UID, + O_LOG_MAC, +}; + +static void LOG_help(void) +{ + printf( +"LOG target options:\n" +" --log-level level Level of logging (numeric or see syslog.conf)\n" +" --log-prefix prefix Prefix log messages with this prefix.\n\n" +" --log-tcp-sequence Log TCP sequence numbers.\n\n" +" --log-tcp-options Log TCP options.\n\n" +" --log-ip-options Log IP options.\n\n" +" --log-uid Log UID owning the local socket.\n\n" +" --log-macdecode Decode MAC addresses and protocol.\n\n"); +} + +#define s struct ipt_log_info +static const struct xt_option_entry LOG_opts[] = { + {.name = "log-level", .id = O_LOG_LEVEL, .type = XTTYPE_SYSLOGLEVEL, + .flags = XTOPT_PUT, XTOPT_POINTER(s, level)}, + {.name = "log-prefix", .id = O_LOG_PREFIX, .type = XTTYPE_STRING, + .flags = XTOPT_PUT, XTOPT_POINTER(s, prefix), .min = 1}, + {.name = "log-tcp-sequence", .id = O_LOG_TCPSEQ, .type = XTTYPE_NONE}, + {.name = "log-tcp-options", .id = O_LOG_TCPOPTS, .type = XTTYPE_NONE}, + {.name = "log-ip-options", .id = O_LOG_IPOPTS, .type = XTTYPE_NONE}, + {.name = "log-uid", .id = O_LOG_UID, .type = XTTYPE_NONE}, + {.name = "log-macdecode", .id = O_LOG_MAC, .type = XTTYPE_NONE}, + XTOPT_TABLEEND, +}; +#undef s + +static void LOG_init(struct xt_entry_target *t) +{ + struct ipt_log_info *loginfo = (struct ipt_log_info *)t->data; + + loginfo->level = LOG_DEFAULT_LEVEL; + +} + +struct ipt_log_names { + const char *name; + unsigned int level; +}; + +static const struct ipt_log_names ipt_log_names[] += { { .name = "alert", .level = LOG_ALERT }, + { .name = "crit", .level = LOG_CRIT }, + { .name = "debug", .level = LOG_DEBUG }, + { .name = "emerg", .level = LOG_EMERG }, + { .name = "error", .level = LOG_ERR }, /* DEPRECATED */ + { .name = "info", .level = LOG_INFO }, + { .name = "notice", .level = LOG_NOTICE }, + { .name = "panic", .level = LOG_EMERG }, /* DEPRECATED */ + { .name = "warning", .level = LOG_WARNING } +}; + +static void LOG_parse(struct xt_option_call *cb) +{ + struct ipt_log_info *info = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_LOG_PREFIX: + if (strchr(cb->arg, '\n') != NULL) + xtables_error(PARAMETER_PROBLEM, + "Newlines not allowed in --log-prefix"); + break; + case O_LOG_TCPSEQ: + info->logflags |= IPT_LOG_TCPSEQ; + break; + case O_LOG_TCPOPTS: + info->logflags |= IPT_LOG_TCPOPT; + break; + case O_LOG_IPOPTS: + info->logflags |= IPT_LOG_IPOPT; + break; + case O_LOG_UID: + info->logflags |= IPT_LOG_UID; + break; + case O_LOG_MAC: + info->logflags |= IPT_LOG_MACDECODE; + break; + } +} + +static void LOG_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct ipt_log_info *loginfo + = (const struct ipt_log_info *)target->data; + unsigned int i = 0; + + printf(" LOG"); + if (numeric) + printf(" flags %u level %u", + loginfo->logflags, loginfo->level); + else { + for (i = 0; i < ARRAY_SIZE(ipt_log_names); ++i) + if (loginfo->level == ipt_log_names[i].level) { + printf(" level %s", ipt_log_names[i].name); + break; + } + if (i == ARRAY_SIZE(ipt_log_names)) + printf(" UNKNOWN level %u", loginfo->level); + if (loginfo->logflags & IPT_LOG_TCPSEQ) + printf(" tcp-sequence"); + if (loginfo->logflags & IPT_LOG_TCPOPT) + printf(" tcp-options"); + if (loginfo->logflags & IPT_LOG_IPOPT) + printf(" ip-options"); + if (loginfo->logflags & IPT_LOG_UID) + printf(" uid"); + if (loginfo->logflags & IPT_LOG_MACDECODE) + printf(" macdecode"); + if (loginfo->logflags & ~(IPT_LOG_MASK)) + printf(" unknown-flags"); + } + + if (strcmp(loginfo->prefix, "") != 0) + printf(" prefix \"%s\"", loginfo->prefix); +} + +static void LOG_save(const void *ip, const struct xt_entry_target *target) +{ + const struct ipt_log_info *loginfo + = (const struct ipt_log_info *)target->data; + + if (strcmp(loginfo->prefix, "") != 0) { + printf(" --log-prefix"); + xtables_save_string(loginfo->prefix); + } + + if (loginfo->level != LOG_DEFAULT_LEVEL) + printf(" --log-level %d", loginfo->level); + + if (loginfo->logflags & IPT_LOG_TCPSEQ) + printf(" --log-tcp-sequence"); + if (loginfo->logflags & IPT_LOG_TCPOPT) + printf(" --log-tcp-options"); + if (loginfo->logflags & IPT_LOG_IPOPT) + printf(" --log-ip-options"); + if (loginfo->logflags & IPT_LOG_UID) + printf(" --log-uid"); + if (loginfo->logflags & IPT_LOG_MACDECODE) + printf(" --log-macdecode"); +} + +static struct xtables_target log_tg_reg = { + .name = "LOG", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(sizeof(struct ipt_log_info)), + .userspacesize = XT_ALIGN(sizeof(struct ipt_log_info)), + .help = LOG_help, + .init = LOG_init, + .print = LOG_print, + .save = LOG_save, + .x6_parse = LOG_parse, + .x6_options = LOG_opts, +}; + +void _init(void) +{ + xtables_register_target(&log_tg_reg); +} diff --git a/extensions/libipt_LOG.man b/extensions/libipt_LOG.man new file mode 100644 index 0000000..47c35e0 --- /dev/null +++ b/extensions/libipt_LOG.man @@ -0,0 +1,31 @@ +Turn on kernel logging of matching packets. When this option is set +for a rule, the Linux kernel will print some information on all +matching packets (like most IP header fields) via the kernel log +(where it can be read with +.I dmesg +or +.IR syslogd (8)). +This is a "non-terminating target", i.e. rule traversal continues at +the next rule. So if you want to LOG the packets you refuse, use two +separate rules with the same matching criteria, first using target LOG +then DROP (or REJECT). +.TP +\fB\-\-log\-level\fP \fIlevel\fP +Level of logging (numeric or see \fIsyslog.conf\fP(5)). +.TP +\fB\-\-log\-prefix\fP \fIprefix\fP +Prefix log messages with the specified prefix; up to 29 letters long, +and useful for distinguishing messages in the logs. +.TP +\fB\-\-log\-tcp\-sequence\fP +Log TCP sequence numbers. This is a security risk if the log is +readable by users. +.TP +\fB\-\-log\-tcp\-options\fP +Log options from the TCP packet header. +.TP +\fB\-\-log\-ip\-options\fP +Log options from the IP packet header. +.TP +\fB\-\-log\-uid\fP +Log the userid of the process which generated the packet. diff --git a/extensions/libipt_MASQUERADE.c b/extensions/libipt_MASQUERADE.c new file mode 100644 index 0000000..7ba42df --- /dev/null +++ b/extensions/libipt_MASQUERADE.c @@ -0,0 +1,154 @@ +#include +#include +#include +#include +#include +#include +#include /* INT_MAX in ip_tables.h */ +#include +#include + +enum { + O_TO_PORTS = 0, + O_RANDOM, +}; + +static void MASQUERADE_help(void) +{ + printf( +"MASQUERADE target options:\n" +" --to-ports [-]\n" +" Port (range) to map to.\n" +" --random\n" +" Randomize source port.\n"); +} + +static const struct xt_option_entry MASQUERADE_opts[] = { + {.name = "to-ports", .id = O_TO_PORTS, .type = XTTYPE_STRING}, + {.name = "random", .id = O_RANDOM, .type = XTTYPE_NONE}, + XTOPT_TABLEEND, +}; + +static void MASQUERADE_init(struct xt_entry_target *t) +{ + struct nf_nat_multi_range *mr = (struct nf_nat_multi_range *)t->data; + + /* Actually, it's 0, but it's ignored at the moment. */ + mr->rangesize = 1; +} + +/* Parses ports */ +static void +parse_ports(const char *arg, struct nf_nat_multi_range *mr) +{ + char *end; + unsigned int port, maxport; + + mr->range[0].flags |= IP_NAT_RANGE_PROTO_SPECIFIED; + + if (!xtables_strtoui(arg, &end, &port, 0, UINT16_MAX)) + xtables_param_act(XTF_BAD_VALUE, "MASQUERADE", "--to-ports", arg); + + switch (*end) { + case '\0': + mr->range[0].min.tcp.port + = mr->range[0].max.tcp.port + = htons(port); + return; + case '-': + if (!xtables_strtoui(end + 1, NULL, &maxport, 0, UINT16_MAX)) + break; + + if (maxport < port) + break; + + mr->range[0].min.tcp.port = htons(port); + mr->range[0].max.tcp.port = htons(maxport); + return; + default: + break; + } + xtables_param_act(XTF_BAD_VALUE, "MASQUERADE", "--to-ports", arg); +} + +static void MASQUERADE_parse(struct xt_option_call *cb) +{ + const struct ipt_entry *entry = cb->xt_entry; + int portok; + struct nf_nat_multi_range *mr = cb->data; + + if (entry->ip.proto == IPPROTO_TCP + || entry->ip.proto == IPPROTO_UDP + || entry->ip.proto == IPPROTO_SCTP + || entry->ip.proto == IPPROTO_DCCP + || entry->ip.proto == IPPROTO_ICMP) + portok = 1; + else + portok = 0; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_TO_PORTS: + if (!portok) + xtables_error(PARAMETER_PROBLEM, + "Need TCP, UDP, SCTP or DCCP with port specification"); + parse_ports(cb->arg, mr); + break; + case O_RANDOM: + mr->range[0].flags |= IP_NAT_RANGE_PROTO_RANDOM; + break; + } +} + +static void +MASQUERADE_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct nf_nat_multi_range *mr = (const void *)target->data; + const struct nf_nat_range *r = &mr->range[0]; + + if (r->flags & IP_NAT_RANGE_PROTO_SPECIFIED) { + printf(" masq ports: "); + printf("%hu", ntohs(r->min.tcp.port)); + if (r->max.tcp.port != r->min.tcp.port) + printf("-%hu", ntohs(r->max.tcp.port)); + } + + if (r->flags & IP_NAT_RANGE_PROTO_RANDOM) + printf(" random"); +} + +static void +MASQUERADE_save(const void *ip, const struct xt_entry_target *target) +{ + const struct nf_nat_multi_range *mr = (const void *)target->data; + const struct nf_nat_range *r = &mr->range[0]; + + if (r->flags & IP_NAT_RANGE_PROTO_SPECIFIED) { + printf(" --to-ports %hu", ntohs(r->min.tcp.port)); + if (r->max.tcp.port != r->min.tcp.port) + printf("-%hu", ntohs(r->max.tcp.port)); + } + + if (r->flags & IP_NAT_RANGE_PROTO_RANDOM) + printf(" --random"); +} + +static struct xtables_target masquerade_tg_reg = { + .name = "MASQUERADE", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(sizeof(struct nf_nat_multi_range)), + .userspacesize = XT_ALIGN(sizeof(struct nf_nat_multi_range)), + .help = MASQUERADE_help, + .init = MASQUERADE_init, + .x6_parse = MASQUERADE_parse, + .print = MASQUERADE_print, + .save = MASQUERADE_save, + .x6_options = MASQUERADE_opts, +}; + +void _init(void) +{ + xtables_register_target(&masquerade_tg_reg); +} diff --git a/extensions/libipt_MASQUERADE.man b/extensions/libipt_MASQUERADE.man new file mode 100644 index 0000000..2dae964 --- /dev/null +++ b/extensions/libipt_MASQUERADE.man @@ -0,0 +1,30 @@ +This target is only valid in the +.B nat +table, in the +.B POSTROUTING +chain. It should only be used with dynamically assigned IP (dialup) +connections: if you have a static IP address, you should use the SNAT +target. Masquerading is equivalent to specifying a mapping to the IP +address of the interface the packet is going out, but also has the +effect that connections are +.I forgotten +when the interface goes down. This is the correct behavior when the +next dialup is unlikely to have the same interface address (and hence +any established connections are lost anyway). +.TP +\fB\-\-to\-ports\fP \fIport\fP[\fB\-\fP\fIport\fP] +This specifies a range of source ports to use, overriding the default +.B SNAT +source port-selection heuristics (see above). This is only valid +if the rule also specifies +\fB\-p tcp\fP +or +\fB\-p udp\fP. +.TP +\fB\-\-random\fP +Randomize source port mapping +If option +\fB\-\-random\fP +is used then port mapping will be randomized (kernel >= 2.6.21). +.RS +.PP diff --git a/extensions/libipt_MIRROR.c b/extensions/libipt_MIRROR.c new file mode 100644 index 0000000..fb78751 --- /dev/null +++ b/extensions/libipt_MIRROR.c @@ -0,0 +1,15 @@ +/* Shared library add-on to iptables to add MIRROR target support. */ +#include + +static struct xtables_target mirror_tg_reg = { + .name = "MIRROR", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(0), + .userspacesize = XT_ALIGN(0), +}; + +void _init(void) +{ + xtables_register_target(&mirror_tg_reg); +} diff --git a/extensions/libipt_MIRROR.man b/extensions/libipt_MIRROR.man new file mode 100644 index 0000000..7b720bc --- /dev/null +++ b/extensions/libipt_MIRROR.man @@ -0,0 +1,12 @@ +This is an experimental demonstration target which inverts the source +and destination fields in the IP header and retransmits the packet. +It is only valid in the +.BR INPUT , +.B FORWARD +and +.B PREROUTING +chains, and user-defined chains which are only called from those +chains. Note that the outgoing packets are +.B NOT +seen by any packet filtering chains, connection tracking or NAT, to +avoid loops and other problems. diff --git a/extensions/libipt_NETMAP.c b/extensions/libipt_NETMAP.c new file mode 100644 index 0000000..5c4471a --- /dev/null +++ b/extensions/libipt_NETMAP.c @@ -0,0 +1,106 @@ +/* Shared library add-on to iptables to add static NAT support. + Author: Svenning Soerensen +*/ +#include +#include +#include +#include +#include +#include +#include + +#define MODULENAME "NETMAP" + +enum { + O_TO = 0, +}; + +static const struct xt_option_entry NETMAP_opts[] = { + {.name = "to", .id = O_TO, .type = XTTYPE_HOSTMASK, + .flags = XTOPT_MAND}, + XTOPT_TABLEEND, +}; + +static void NETMAP_help(void) +{ + printf(MODULENAME" target options:\n" + " --%s address[/mask]\n" + " Network address to map to.\n\n", + NETMAP_opts[0].name); +} + +static int +netmask2bits(uint32_t netmask) +{ + uint32_t bm; + int bits; + + netmask = ntohl(netmask); + for (bits = 0, bm = 0x80000000; netmask & bm; netmask <<= 1) + bits++; + if (netmask) + return -1; /* holes in netmask */ + return bits; +} + +static void NETMAP_init(struct xt_entry_target *t) +{ + struct nf_nat_multi_range *mr = (struct nf_nat_multi_range *)t->data; + + /* Actually, it's 0, but it's ignored at the moment. */ + mr->rangesize = 1; +} + +static void NETMAP_parse(struct xt_option_call *cb) +{ + struct nf_nat_multi_range *mr = cb->data; + struct nf_nat_range *range = &mr->range[0]; + + xtables_option_parse(cb); + range->flags |= IP_NAT_RANGE_MAP_IPS; + range->min_ip = cb->val.haddr.ip & cb->val.hmask.ip; + range->max_ip = range->min_ip | ~cb->val.hmask.ip; +} + +static void NETMAP_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct nf_nat_multi_range *mr = (const void *)target->data; + const struct nf_nat_range *r = &mr->range[0]; + struct in_addr a; + int bits; + + a.s_addr = r->min_ip; + printf("%s", xtables_ipaddr_to_numeric(&a)); + a.s_addr = ~(r->min_ip ^ r->max_ip); + bits = netmask2bits(a.s_addr); + if (bits < 0) + printf("/%s", xtables_ipaddr_to_numeric(&a)); + else + printf("/%d", bits); +} + +static void NETMAP_save(const void *ip, const struct xt_entry_target *target) +{ + printf(" --%s ", NETMAP_opts[0].name); + NETMAP_print(ip, target, 0); +} + +static struct xtables_target netmap_tg_reg = { + .name = MODULENAME, + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(sizeof(struct nf_nat_multi_range)), + .userspacesize = XT_ALIGN(sizeof(struct nf_nat_multi_range)), + .help = NETMAP_help, + .init = NETMAP_init, + .x6_parse = NETMAP_parse, + .print = NETMAP_print, + .save = NETMAP_save, + .x6_options = NETMAP_opts, +}; + +void _init(void) +{ + xtables_register_target(&netmap_tg_reg); +} diff --git a/extensions/libipt_NETMAP.man b/extensions/libipt_NETMAP.man new file mode 100644 index 0000000..a7e90b8 --- /dev/null +++ b/extensions/libipt_NETMAP.man @@ -0,0 +1,9 @@ +This target allows you to statically map a whole network of addresses onto +another network of addresses. It can only be used from rules in the +.B nat +table. +.TP +\fB\-\-to\fP \fIaddress\fP[\fB/\fP\fImask\fP] +Network address to map to. The resulting address will be constructed in the +following way: All 'one' bits in the mask are filled in from the new `address'. +All bits that are zero in the mask are filled in from the original address. diff --git a/extensions/libipt_REDIRECT.c b/extensions/libipt_REDIRECT.c new file mode 100644 index 0000000..e67360a --- /dev/null +++ b/extensions/libipt_REDIRECT.c @@ -0,0 +1,155 @@ +#include +#include +#include +#include +#include /* INT_MAX in ip_tables.h */ +#include +#include + +enum { + O_TO_PORTS = 0, + O_RANDOM, + F_TO_PORTS = 1 << O_TO_PORTS, + F_RANDOM = 1 << O_RANDOM, +}; + +static void REDIRECT_help(void) +{ + printf( +"REDIRECT target options:\n" +" --to-ports [-]\n" +" Port (range) to map to.\n" +" [--random]\n"); +} + +static const struct xt_option_entry REDIRECT_opts[] = { + {.name = "to-ports", .id = O_TO_PORTS, .type = XTTYPE_STRING}, + {.name = "random", .id = O_RANDOM, .type = XTTYPE_NONE}, + XTOPT_TABLEEND, +}; + +static void REDIRECT_init(struct xt_entry_target *t) +{ + struct nf_nat_multi_range *mr = (struct nf_nat_multi_range *)t->data; + + /* Actually, it's 0, but it's ignored at the moment. */ + mr->rangesize = 1; +} + +/* Parses ports */ +static void +parse_ports(const char *arg, struct nf_nat_multi_range *mr) +{ + char *end = ""; + unsigned int port, maxport; + + mr->range[0].flags |= IP_NAT_RANGE_PROTO_SPECIFIED; + + if (!xtables_strtoui(arg, &end, &port, 0, UINT16_MAX) && + (port = xtables_service_to_port(arg, NULL)) == (unsigned)-1) + xtables_param_act(XTF_BAD_VALUE, "REDIRECT", "--to-ports", arg); + + switch (*end) { + case '\0': + mr->range[0].min.tcp.port + = mr->range[0].max.tcp.port + = htons(port); + return; + case '-': + if (!xtables_strtoui(end + 1, NULL, &maxport, 0, UINT16_MAX) && + (maxport = xtables_service_to_port(end + 1, NULL)) == (unsigned)-1) + break; + + if (maxport < port) + break; + + mr->range[0].min.tcp.port = htons(port); + mr->range[0].max.tcp.port = htons(maxport); + return; + default: + break; + } + xtables_param_act(XTF_BAD_VALUE, "REDIRECT", "--to-ports", arg); +} + +static void REDIRECT_parse(struct xt_option_call *cb) +{ + const struct ipt_entry *entry = cb->xt_entry; + struct nf_nat_multi_range *mr = (void *)(*cb->target)->data; + int portok; + + if (entry->ip.proto == IPPROTO_TCP + || entry->ip.proto == IPPROTO_UDP + || entry->ip.proto == IPPROTO_SCTP + || entry->ip.proto == IPPROTO_DCCP + || entry->ip.proto == IPPROTO_ICMP) + portok = 1; + else + portok = 0; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_TO_PORTS: + if (!portok) + xtables_error(PARAMETER_PROBLEM, + "Need TCP, UDP, SCTP or DCCP with port specification"); + parse_ports(cb->arg, mr); + if (cb->xflags & F_RANDOM) + mr->range[0].flags |= IP_NAT_RANGE_PROTO_RANDOM; + break; + case O_RANDOM: + if (cb->xflags & F_TO_PORTS) + mr->range[0].flags |= IP_NAT_RANGE_PROTO_RANDOM; + break; + } +} + +static void REDIRECT_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct nf_nat_multi_range *mr = (const void *)target->data; + const struct nf_nat_range *r = &mr->range[0]; + + if (r->flags & IP_NAT_RANGE_PROTO_SPECIFIED) { + printf(" redir ports "); + printf("%hu", ntohs(r->min.tcp.port)); + if (r->max.tcp.port != r->min.tcp.port) + printf("-%hu", ntohs(r->max.tcp.port)); + if (mr->range[0].flags & IP_NAT_RANGE_PROTO_RANDOM) + printf(" random"); + } +} + +static void REDIRECT_save(const void *ip, const struct xt_entry_target *target) +{ + const struct nf_nat_multi_range *mr = (const void *)target->data; + const struct nf_nat_range *r = &mr->range[0]; + + if (r->flags & IP_NAT_RANGE_PROTO_SPECIFIED) { + printf(" --to-ports "); + printf("%hu", ntohs(r->min.tcp.port)); + if (r->max.tcp.port != r->min.tcp.port) + printf("-%hu", ntohs(r->max.tcp.port)); + if (mr->range[0].flags & IP_NAT_RANGE_PROTO_RANDOM) + printf(" --random"); + } +} + +static struct xtables_target redirect_tg_reg = { + .name = "REDIRECT", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(sizeof(struct nf_nat_multi_range)), + .userspacesize = XT_ALIGN(sizeof(struct nf_nat_multi_range)), + .help = REDIRECT_help, + .init = REDIRECT_init, + .x6_parse = REDIRECT_parse, + .print = REDIRECT_print, + .save = REDIRECT_save, + .x6_options = REDIRECT_opts, +}; + +void _init(void) +{ + xtables_register_target(&redirect_tg_reg); +} diff --git a/extensions/libipt_REDIRECT.man b/extensions/libipt_REDIRECT.man new file mode 100644 index 0000000..90ab19d --- /dev/null +++ b/extensions/libipt_REDIRECT.man @@ -0,0 +1,25 @@ +This target is only valid in the +.B nat +table, in the +.B PREROUTING +and +.B OUTPUT +chains, and user-defined chains which are only called from those +chains. It redirects the packet to the machine itself by changing the +destination IP to the primary address of the incoming interface +(locally-generated packets are mapped to the 127.0.0.1 address). +.TP +\fB\-\-to\-ports\fP \fIport\fP[\fB\-\fP\fIport\fP] +This specifies a destination port or range of ports to use: without +this, the destination port is never altered. This is only valid +if the rule also specifies +\fB\-p tcp\fP +or +\fB\-p udp\fP. +.TP +\fB\-\-random\fP +If option +\fB\-\-random\fP +is used then port mapping will be randomized (kernel >= 2.6.22). +.RS +.PP diff --git a/extensions/libipt_REJECT.c b/extensions/libipt_REJECT.c new file mode 100644 index 0000000..362c65e --- /dev/null +++ b/extensions/libipt_REJECT.c @@ -0,0 +1,160 @@ +/* Shared library add-on to iptables to add customized REJECT support. + * + * (C) 2000 Jozsef Kadlecsik + */ +#include +#include +#include +#include +#include + +/* If we are compiling against a kernel that does not support + * IPT_ICMP_ADMIN_PROHIBITED, we are emulating it. + * The result will be a plain DROP of the packet instead of + * reject. -- Maciej Soltysiak + */ +#ifndef IPT_ICMP_ADMIN_PROHIBITED +#define IPT_ICMP_ADMIN_PROHIBITED IPT_TCP_RESET + 1 +#endif + +struct reject_names { + const char *name; + const char *alias; + enum ipt_reject_with with; + const char *desc; +}; + +enum { + O_REJECT_WITH = 0, +}; + +static const struct reject_names reject_table[] = { + {"icmp-net-unreachable", "net-unreach", + IPT_ICMP_NET_UNREACHABLE, "ICMP network unreachable"}, + {"icmp-host-unreachable", "host-unreach", + IPT_ICMP_HOST_UNREACHABLE, "ICMP host unreachable"}, + {"icmp-proto-unreachable", "proto-unreach", + IPT_ICMP_PROT_UNREACHABLE, "ICMP protocol unreachable"}, + {"icmp-port-unreachable", "port-unreach", + IPT_ICMP_PORT_UNREACHABLE, "ICMP port unreachable (default)"}, +#if 0 + {"echo-reply", "echoreply", + IPT_ICMP_ECHOREPLY, "for ICMP echo only: faked ICMP echo reply"}, +#endif + {"icmp-net-prohibited", "net-prohib", + IPT_ICMP_NET_PROHIBITED, "ICMP network prohibited"}, + {"icmp-host-prohibited", "host-prohib", + IPT_ICMP_HOST_PROHIBITED, "ICMP host prohibited"}, + {"tcp-reset", "tcp-rst", + IPT_TCP_RESET, "TCP RST packet"}, + {"icmp-admin-prohibited", "admin-prohib", + IPT_ICMP_ADMIN_PROHIBITED, "ICMP administratively prohibited (*)"} +}; + +static void +print_reject_types(void) +{ + unsigned int i; + + printf("Valid reject types:\n"); + + for (i = 0; i < ARRAY_SIZE(reject_table); ++i) { + printf(" %-25s\t%s\n", reject_table[i].name, reject_table[i].desc); + printf(" %-25s\talias\n", reject_table[i].alias); + } + printf("\n"); +} + +static void REJECT_help(void) +{ + printf( +"REJECT target options:\n" +"--reject-with type drop input packet and send back\n" +" a reply packet according to type:\n"); + + print_reject_types(); + + printf("(*) See man page or read the INCOMPATIBILITES file for compatibility issues.\n"); +} + +static const struct xt_option_entry REJECT_opts[] = { + {.name = "reject-with", .id = O_REJECT_WITH, .type = XTTYPE_STRING}, + XTOPT_TABLEEND, +}; + +static void REJECT_init(struct xt_entry_target *t) +{ + struct ipt_reject_info *reject = (struct ipt_reject_info *)t->data; + + /* default */ + reject->with = IPT_ICMP_PORT_UNREACHABLE; + +} + +static void REJECT_parse(struct xt_option_call *cb) +{ + struct ipt_reject_info *reject = cb->data; + unsigned int i; + + xtables_option_parse(cb); + for (i = 0; i < ARRAY_SIZE(reject_table); ++i) + if (strncasecmp(reject_table[i].name, + cb->arg, strlen(cb->arg)) == 0 || + strncasecmp(reject_table[i].alias, + cb->arg, strlen(cb->arg)) == 0) { + reject->with = reject_table[i].with; + return; + } + /* This due to be dropped late in 2.4 pre-release cycle --RR */ + if (strncasecmp("echo-reply", cb->arg, strlen(cb->arg)) == 0 || + strncasecmp("echoreply", cb->arg, strlen(cb->arg)) == 0) + fprintf(stderr, "--reject-with echo-reply no longer" + " supported\n"); + xtables_error(PARAMETER_PROBLEM, + "unknown reject type \"%s\"", cb->arg); +} + +static void REJECT_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct ipt_reject_info *reject + = (const struct ipt_reject_info *)target->data; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(reject_table); ++i) + if (reject_table[i].with == reject->with) + break; + printf(" reject-with %s", reject_table[i].name); +} + +static void REJECT_save(const void *ip, const struct xt_entry_target *target) +{ + const struct ipt_reject_info *reject + = (const struct ipt_reject_info *)target->data; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(reject_table); ++i) + if (reject_table[i].with == reject->with) + break; + + printf(" --reject-with %s", reject_table[i].name); +} + +static struct xtables_target reject_tg_reg = { + .name = "REJECT", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(sizeof(struct ipt_reject_info)), + .userspacesize = XT_ALIGN(sizeof(struct ipt_reject_info)), + .help = REJECT_help, + .init = REJECT_init, + .print = REJECT_print, + .save = REJECT_save, + .x6_parse = REJECT_parse, + .x6_options = REJECT_opts, +}; + +void _init(void) +{ + xtables_register_target(&reject_tg_reg); +} diff --git a/extensions/libipt_REJECT.man b/extensions/libipt_REJECT.man new file mode 100644 index 0000000..c419a85 --- /dev/null +++ b/extensions/libipt_REJECT.man @@ -0,0 +1,32 @@ +This is used to send back an error packet in response to the matched +packet: otherwise it is equivalent to +.B DROP +so it is a terminating TARGET, ending rule traversal. +This target is only valid in the +.BR INPUT , +.B FORWARD +and +.B OUTPUT +chains, and user-defined chains which are only called from those +chains. The following option controls the nature of the error packet +returned: +.TP +\fB\-\-reject\-with\fP \fItype\fP +The type given can be +\fBicmp\-net\-unreachable\fP, +\fBicmp\-host\-unreachable\fP, +\fBicmp\-port\-unreachable\fP, +\fBicmp\-proto\-unreachable\fP, +\fBicmp\-net\-prohibited\fP, +\fBicmp\-host\-prohibited\fP or +\fBicmp\-admin\-prohibited\fP (*) +which return the appropriate ICMP error message (\fBport\-unreachable\fP is +the default). The option +\fBtcp\-reset\fP +can be used on rules which only match the TCP protocol: this causes a +TCP RST packet to be sent back. This is mainly useful for blocking +.I ident +(113/tcp) probes which frequently occur when sending mail to broken mail +hosts (which won't accept your mail otherwise). +.PP +(*) Using icmp\-admin\-prohibited with kernels that do not support it will result in a plain DROP instead of REJECT diff --git a/extensions/libipt_SAME.c b/extensions/libipt_SAME.c new file mode 100644 index 0000000..e603ef6 --- /dev/null +++ b/extensions/libipt_SAME.c @@ -0,0 +1,181 @@ +#include +#include +#include +#include +#include +#include + +enum { + O_TO_ADDR = 0, + O_NODST, + O_RANDOM, + F_TO_ADDR = 1 << O_TO_ADDR, + F_RANDOM = 1 << O_RANDOM, +}; + +static void SAME_help(void) +{ + printf( +"SAME target options:\n" +" --to -\n" +" Addresses to map source to.\n" +" May be specified more than\n" +" once for multiple ranges.\n" +" --nodst\n" +" Don't use destination-ip in\n" +" source selection\n" +" --random\n" +" Randomize source port\n"); +} + +static const struct xt_option_entry SAME_opts[] = { + {.name = "to", .id = O_TO_ADDR, .type = XTTYPE_STRING, + .flags = XTOPT_MAND}, + {.name = "nodst", .id = O_NODST, .type = XTTYPE_NONE}, + {.name = "random", .id = O_RANDOM, .type = XTTYPE_NONE}, + XTOPT_TABLEEND, +}; + +/* Parses range of IPs */ +static void parse_to(const char *orig_arg, struct nf_nat_range *range) +{ + char *dash, *arg; + const struct in_addr *ip; + + arg = strdup(orig_arg); + if (arg == NULL) + xtables_error(RESOURCE_PROBLEM, "strdup"); + range->flags |= IP_NAT_RANGE_MAP_IPS; + dash = strchr(arg, '-'); + + if (dash) + *dash = '\0'; + + ip = xtables_numeric_to_ipaddr(arg); + if (!ip) + xtables_error(PARAMETER_PROBLEM, "Bad IP address \"%s\"\n", + arg); + range->min_ip = ip->s_addr; + + if (dash) { + ip = xtables_numeric_to_ipaddr(dash+1); + if (!ip) + xtables_error(PARAMETER_PROBLEM, "Bad IP address \"%s\"\n", + dash+1); + } + range->max_ip = ip->s_addr; + if (dash) + if (range->min_ip > range->max_ip) + xtables_error(PARAMETER_PROBLEM, "Bad IP range \"%s-%s\"\n", + arg, dash+1); + free(arg); +} + +static void SAME_parse(struct xt_option_call *cb) +{ + struct ipt_same_info *mr = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_TO_ADDR: + if (mr->rangesize == IPT_SAME_MAX_RANGE) + xtables_error(PARAMETER_PROBLEM, + "Too many ranges specified, maximum " + "is %i ranges.\n", + IPT_SAME_MAX_RANGE); + parse_to(cb->arg, &mr->range[mr->rangesize]); + mr->rangesize++; + break; + case O_NODST: + mr->info |= IPT_SAME_NODST; + break; + } +} + +static void SAME_fcheck(struct xt_fcheck_call *cb) +{ + static const unsigned int f = F_TO_ADDR | F_RANDOM; + struct ipt_same_info *mr = cb->data; + unsigned int count; + + if ((cb->xflags & f) == f) + for (count = 0; count < mr->rangesize; ++count) + mr->range[count].flags |= IP_NAT_RANGE_PROTO_RANDOM; +} + +static void SAME_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + unsigned int count; + const struct ipt_same_info *mr = (const void *)target->data; + int random_selection = 0; + + printf(" same:"); + + for (count = 0; count < mr->rangesize; count++) { + const struct nf_nat_range *r = &mr->range[count]; + struct in_addr a; + + a.s_addr = r->min_ip; + + printf("%s", xtables_ipaddr_to_numeric(&a)); + a.s_addr = r->max_ip; + + if (r->min_ip != r->max_ip) + printf("-%s", xtables_ipaddr_to_numeric(&a)); + if (r->flags & IP_NAT_RANGE_PROTO_RANDOM) + random_selection = 1; + } + + if (mr->info & IPT_SAME_NODST) + printf(" nodst"); + + if (random_selection) + printf(" random"); +} + +static void SAME_save(const void *ip, const struct xt_entry_target *target) +{ + unsigned int count; + const struct ipt_same_info *mr = (const void *)target->data; + int random_selection = 0; + + for (count = 0; count < mr->rangesize; count++) { + const struct nf_nat_range *r = &mr->range[count]; + struct in_addr a; + + a.s_addr = r->min_ip; + printf(" --to %s", xtables_ipaddr_to_numeric(&a)); + a.s_addr = r->max_ip; + + if (r->min_ip != r->max_ip) + printf("-%s", xtables_ipaddr_to_numeric(&a)); + if (r->flags & IP_NAT_RANGE_PROTO_RANDOM) + random_selection = 1; + } + + if (mr->info & IPT_SAME_NODST) + printf(" --nodst"); + + if (random_selection) + printf(" --random"); +} + +static struct xtables_target same_tg_reg = { + .name = "SAME", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(sizeof(struct ipt_same_info)), + .userspacesize = XT_ALIGN(sizeof(struct ipt_same_info)), + .help = SAME_help, + .x6_parse = SAME_parse, + .x6_fcheck = SAME_fcheck, + .print = SAME_print, + .save = SAME_save, + .x6_options = SAME_opts, +}; + +void _init(void) +{ + xtables_register_target(&same_tg_reg); +} diff --git a/extensions/libipt_SAME.man b/extensions/libipt_SAME.man new file mode 100644 index 0000000..a99dc73 --- /dev/null +++ b/extensions/libipt_SAME.man @@ -0,0 +1,17 @@ +Similar to SNAT/DNAT depending on chain: it takes a range of addresses +(`\-\-to 1.2.3.4\-1.2.3.7') and gives a client the same +source-/destination-address for each connection. +.PP +N.B.: The DNAT target's \fB\-\-persistent\fP option replaced the SAME target. +.TP +\fB\-\-to\fP \fIipaddr\fP[\fB\-\fP\fIipaddr\fP] +Addresses to map source to. May be specified more than once for +multiple ranges. +.TP +\fB\-\-nodst\fP +Don't use the destination-ip in the calculations when selecting the +new source-ip +.TP +\fB\-\-random\fP +Port mapping will be forcibly randomized to avoid attacks based on +port prediction (kernel >= 2.6.21). diff --git a/extensions/libipt_SNAT.c b/extensions/libipt_SNAT.c new file mode 100644 index 0000000..c8cb26d --- /dev/null +++ b/extensions/libipt_SNAT.c @@ -0,0 +1,262 @@ +#include +#include +#include +#include +#include +#include +#include /* INT_MAX in ip_tables.h */ +#include +#include + +enum { + O_TO_SRC = 0, + O_RANDOM, + O_PERSISTENT, + O_X_TO_SRC, + F_TO_SRC = 1 << O_TO_SRC, + F_RANDOM = 1 << O_RANDOM, + F_X_TO_SRC = 1 << O_X_TO_SRC, +}; + +/* Source NAT data consists of a multi-range, indicating where to map + to. */ +struct ipt_natinfo +{ + struct xt_entry_target t; + struct nf_nat_multi_range mr; +}; + +static void SNAT_help(void) +{ + printf( +"SNAT target options:\n" +" --to-source [[-]][:port[-port]]\n" +" Address to map source to.\n" +"[--random] [--persistent]\n"); +} + +static const struct xt_option_entry SNAT_opts[] = { + {.name = "to-source", .id = O_TO_SRC, .type = XTTYPE_STRING, + .flags = XTOPT_MAND | XTOPT_MULTI}, + {.name = "random", .id = O_RANDOM, .type = XTTYPE_NONE}, + {.name = "persistent", .id = O_PERSISTENT, .type = XTTYPE_NONE}, + XTOPT_TABLEEND, +}; + +static struct ipt_natinfo * +append_range(struct ipt_natinfo *info, const struct nf_nat_range *range) +{ + unsigned int size; + + /* One rangesize already in struct ipt_natinfo */ + size = XT_ALIGN(sizeof(*info) + info->mr.rangesize * sizeof(*range)); + + info = realloc(info, size); + if (!info) + xtables_error(OTHER_PROBLEM, "Out of memory\n"); + + info->t.u.target_size = size; + info->mr.range[info->mr.rangesize] = *range; + info->mr.rangesize++; + + return info; +} + +/* Ranges expected in network order. */ +static struct xt_entry_target * +parse_to(const char *orig_arg, int portok, struct ipt_natinfo *info) +{ + struct nf_nat_range range; + char *arg, *colon, *dash, *error; + const struct in_addr *ip; + + arg = strdup(orig_arg); + if (arg == NULL) + xtables_error(RESOURCE_PROBLEM, "strdup"); + memset(&range, 0, sizeof(range)); + colon = strchr(arg, ':'); + + if (colon) { + int port; + + if (!portok) + xtables_error(PARAMETER_PROBLEM, + "Need TCP, UDP, SCTP or DCCP with port specification"); + + range.flags |= IP_NAT_RANGE_PROTO_SPECIFIED; + + port = atoi(colon+1); + if (port <= 0 || port > 65535) + xtables_error(PARAMETER_PROBLEM, + "Port `%s' not valid\n", colon+1); + + error = strchr(colon+1, ':'); + if (error) + xtables_error(PARAMETER_PROBLEM, + "Invalid port:port syntax - use dash\n"); + + dash = strchr(colon, '-'); + if (!dash) { + range.min.tcp.port + = range.max.tcp.port + = htons(port); + } else { + int maxport; + + maxport = atoi(dash + 1); + if (maxport <= 0 || maxport > 65535) + xtables_error(PARAMETER_PROBLEM, + "Port `%s' not valid\n", dash+1); + if (maxport < port) + /* People are stupid. */ + xtables_error(PARAMETER_PROBLEM, + "Port range `%s' funky\n", colon+1); + range.min.tcp.port = htons(port); + range.max.tcp.port = htons(maxport); + } + /* Starts with a colon? No IP info...*/ + if (colon == arg) { + free(arg); + return &(append_range(info, &range)->t); + } + *colon = '\0'; + } + + range.flags |= IP_NAT_RANGE_MAP_IPS; + dash = strchr(arg, '-'); + if (colon && dash && dash > colon) + dash = NULL; + + if (dash) + *dash = '\0'; + + ip = xtables_numeric_to_ipaddr(arg); + if (!ip) + xtables_error(PARAMETER_PROBLEM, "Bad IP address \"%s\"\n", + arg); + range.min_ip = ip->s_addr; + if (dash) { + ip = xtables_numeric_to_ipaddr(dash+1); + if (!ip) + xtables_error(PARAMETER_PROBLEM, "Bad IP address \"%s\"\n", + dash+1); + range.max_ip = ip->s_addr; + } else + range.max_ip = range.min_ip; + + free(arg); + return &(append_range(info, &range)->t); +} + +static void SNAT_parse(struct xt_option_call *cb) +{ + const struct ipt_entry *entry = cb->xt_entry; + struct ipt_natinfo *info = (void *)(*cb->target); + int portok; + + if (entry->ip.proto == IPPROTO_TCP + || entry->ip.proto == IPPROTO_UDP + || entry->ip.proto == IPPROTO_SCTP + || entry->ip.proto == IPPROTO_DCCP + || entry->ip.proto == IPPROTO_ICMP) + portok = 1; + else + portok = 0; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_TO_SRC: + if (cb->xflags & F_X_TO_SRC) { + if (!kernel_version) + get_kernel_version(); + if (kernel_version > LINUX_VERSION(2, 6, 10)) + xtables_error(PARAMETER_PROBLEM, + "SNAT: Multiple --to-source not supported"); + } + *cb->target = parse_to(cb->arg, portok, info); + cb->xflags |= F_X_TO_SRC; + break; + case O_PERSISTENT: + info->mr.range[0].flags |= IP_NAT_RANGE_PERSISTENT; + break; + } +} + +static void SNAT_fcheck(struct xt_fcheck_call *cb) +{ + static const unsigned int f = F_TO_SRC | F_RANDOM; + struct nf_nat_multi_range *mr = cb->data; + + if ((cb->xflags & f) == f) + mr->range[0].flags |= IP_NAT_RANGE_PROTO_RANDOM; +} + +static void print_range(const struct nf_nat_range *r) +{ + if (r->flags & IP_NAT_RANGE_MAP_IPS) { + struct in_addr a; + + a.s_addr = r->min_ip; + printf("%s", xtables_ipaddr_to_numeric(&a)); + if (r->max_ip != r->min_ip) { + a.s_addr = r->max_ip; + printf("-%s", xtables_ipaddr_to_numeric(&a)); + } + } + if (r->flags & IP_NAT_RANGE_PROTO_SPECIFIED) { + printf(":"); + printf("%hu", ntohs(r->min.tcp.port)); + if (r->max.tcp.port != r->min.tcp.port) + printf("-%hu", ntohs(r->max.tcp.port)); + } +} + +static void SNAT_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct ipt_natinfo *info = (const void *)target; + unsigned int i = 0; + + printf(" to:"); + for (i = 0; i < info->mr.rangesize; i++) { + print_range(&info->mr.range[i]); + if (info->mr.range[i].flags & IP_NAT_RANGE_PROTO_RANDOM) + printf(" random"); + if (info->mr.range[i].flags & IP_NAT_RANGE_PERSISTENT) + printf(" persistent"); + } +} + +static void SNAT_save(const void *ip, const struct xt_entry_target *target) +{ + const struct ipt_natinfo *info = (const void *)target; + unsigned int i = 0; + + for (i = 0; i < info->mr.rangesize; i++) { + printf(" --to-source "); + print_range(&info->mr.range[i]); + if (info->mr.range[i].flags & IP_NAT_RANGE_PROTO_RANDOM) + printf(" --random"); + if (info->mr.range[i].flags & IP_NAT_RANGE_PERSISTENT) + printf(" --persistent"); + } +} + +static struct xtables_target snat_tg_reg = { + .name = "SNAT", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(sizeof(struct nf_nat_multi_range)), + .userspacesize = XT_ALIGN(sizeof(struct nf_nat_multi_range)), + .help = SNAT_help, + .x6_parse = SNAT_parse, + .x6_fcheck = SNAT_fcheck, + .print = SNAT_print, + .save = SNAT_save, + .x6_options = SNAT_opts, +}; + +void _init(void) +{ + xtables_register_target(&snat_tg_reg); +} diff --git a/extensions/libipt_SNAT.man b/extensions/libipt_SNAT.man new file mode 100644 index 0000000..626b592 --- /dev/null +++ b/extensions/libipt_SNAT.man @@ -0,0 +1,37 @@ +This target is only valid in the +.B nat +table, in the +.B POSTROUTING +chain. It specifies that the source address of the packet should be +modified (and all future packets in this connection will also be +mangled), and rules should cease being examined. It takes one type +of option: +.TP +\fB\-\-to\-source\fP [\fIipaddr\fP[\fB\-\fP\fIipaddr\fP]][\fB:\fP\fIport\fP[\fB\-\fP\fIport\fP]] +which can specify a single new source IP address, an inclusive range +of IP addresses, and optionally, a port range (which is only valid if +the rule also specifies +\fB\-p tcp\fP +or +\fB\-p udp\fP). +If no port range is specified, then source ports below 512 will be +mapped to other ports below 512: those between 512 and 1023 inclusive +will be mapped to ports below 1024, and other ports will be mapped to +1024 or above. Where possible, no port alteration will occur. + +In Kernels up to 2.6.10, you can add several \-\-to\-source options. For those +kernels, if you specify more than one source address, either via an address +range or multiple \-\-to\-source options, a simple round-robin (one after another +in cycle) takes place between these addresses. +Later Kernels (>= 2.6.11-rc1) don't have the ability to NAT to multiple ranges +anymore. +.TP +\fB\-\-random\fP +If option +\fB\-\-random\fP +is used then port mapping will be randomized (kernel >= 2.6.21). +.TP +\fB\-\-persistent\fP +Gives a client the same source-/destination-address for each connection. +This supersedes the SAME target. Support for persistent mappings is available +from 2.6.29-rc2. diff --git a/extensions/libipt_TTL.c b/extensions/libipt_TTL.c new file mode 100644 index 0000000..0f81280 --- /dev/null +++ b/extensions/libipt_TTL.c @@ -0,0 +1,126 @@ +/* Shared library add-on to iptables for the TTL target + * (C) 2000 by Harald Welte + * + * This program is distributed under the terms of GNU GPL + */ +#include +#include +#include + +enum { + O_TTL_SET = 0, + O_TTL_INC, + O_TTL_DEC, + F_TTL_SET = 1 << O_TTL_SET, + F_TTL_INC = 1 << O_TTL_INC, + F_TTL_DEC = 1 << O_TTL_DEC, + F_ANY = F_TTL_SET | F_TTL_INC | F_TTL_DEC, +}; + +#define s struct ipt_TTL_info +static const struct xt_option_entry TTL_opts[] = { + {.name = "ttl-set", .type = XTTYPE_UINT8, .id = O_TTL_SET, + .excl = F_ANY, .flags = XTOPT_PUT, XTOPT_POINTER(s, ttl)}, + {.name = "ttl-dec", .type = XTTYPE_UINT8, .id = O_TTL_DEC, + .excl = F_ANY, .flags = XTOPT_PUT, XTOPT_POINTER(s, ttl), + .min = 1}, + {.name = "ttl-inc", .type = XTTYPE_UINT8, .id = O_TTL_INC, + .excl = F_ANY, .flags = XTOPT_PUT, XTOPT_POINTER(s, ttl), + .min = 1}, + XTOPT_TABLEEND, +}; +#undef s + +static void TTL_help(void) +{ + printf( +"TTL target options\n" +" --ttl-set value Set TTL to \n" +" --ttl-dec value Decrement TTL by \n" +" --ttl-inc value Increment TTL by \n"); +} + +static void TTL_parse(struct xt_option_call *cb) +{ + struct ipt_TTL_info *info = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_TTL_SET: + info->mode = IPT_TTL_SET; + break; + case O_TTL_DEC: + info->mode = IPT_TTL_DEC; + break; + case O_TTL_INC: + info->mode = IPT_TTL_INC; + break; + } +} + +static void TTL_check(struct xt_fcheck_call *cb) +{ + if (!(cb->xflags & F_ANY)) + xtables_error(PARAMETER_PROBLEM, + "TTL: You must specify an action"); +} + +static void TTL_save(const void *ip, const struct xt_entry_target *target) +{ + const struct ipt_TTL_info *info = + (struct ipt_TTL_info *) target->data; + + switch (info->mode) { + case IPT_TTL_SET: + printf(" --ttl-set"); + break; + case IPT_TTL_DEC: + printf(" --ttl-dec"); + break; + + case IPT_TTL_INC: + printf(" --ttl-inc"); + break; + } + printf(" %u", info->ttl); +} + +static void TTL_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct ipt_TTL_info *info = + (struct ipt_TTL_info *) target->data; + + printf(" TTL "); + switch (info->mode) { + case IPT_TTL_SET: + printf("set to"); + break; + case IPT_TTL_DEC: + printf("decrement by"); + break; + case IPT_TTL_INC: + printf("increment by"); + break; + } + printf(" %u", info->ttl); +} + +static struct xtables_target ttl_tg_reg = { + .name = "TTL", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(sizeof(struct ipt_TTL_info)), + .userspacesize = XT_ALIGN(sizeof(struct ipt_TTL_info)), + .help = TTL_help, + .print = TTL_print, + .save = TTL_save, + .x6_parse = TTL_parse, + .x6_fcheck = TTL_check, + .x6_options = TTL_opts, +}; + +void _init(void) +{ + xtables_register_target(&ttl_tg_reg); +} diff --git a/extensions/libipt_TTL.man b/extensions/libipt_TTL.man new file mode 100644 index 0000000..cf3d1a2 --- /dev/null +++ b/extensions/libipt_TTL.man @@ -0,0 +1,19 @@ +This is used to modify the IPv4 TTL header field. The TTL field determines +how many hops (routers) a packet can traverse until it's time to live is +exceeded. +.PP +Setting or incrementing the TTL field can potentially be very dangerous, +so it should be avoided at any cost. This target is only valid in +.B mangle +table. +.PP +.B Don't ever set or increment the value on packets that leave your local network! +.TP +\fB\-\-ttl\-set\fP \fIvalue\fP +Set the TTL value to `value'. +.TP +\fB\-\-ttl\-dec\fP \fIvalue\fP +Decrement the TTL value `value' times. +.TP +\fB\-\-ttl\-inc\fP \fIvalue\fP +Increment the TTL value `value' times. diff --git a/extensions/libipt_ULOG.c b/extensions/libipt_ULOG.c new file mode 100644 index 0000000..fafb220 --- /dev/null +++ b/extensions/libipt_ULOG.c @@ -0,0 +1,128 @@ +/* Shared library add-on to iptables to add ULOG support. + * + * (C) 2000 by Harald Welte + * + * multipart netlink support based on ideas by Sebastian Zander + * + * + * This software is released under the terms of GNU GPL + * + * libipt_ULOG.c,v 1.7 2001/01/30 11:55:02 laforge Exp + */ +#include +#include +#include +/* For 64bit kernel / 32bit userspace */ +#include + +enum { + O_ULOG_NLGROUP = 0, + O_ULOG_PREFIX, + O_ULOG_CPRANGE, + O_ULOG_QTHR, +}; + +static void ULOG_help(void) +{ + printf("ULOG target options:\n" + " --ulog-nlgroup nlgroup NETLINK group used for logging\n" + " --ulog-cprange size Bytes of each packet to be passed\n" + " --ulog-qthreshold Threshold of in-kernel queue\n" + " --ulog-prefix prefix Prefix log messages with this prefix.\n"); +} + +static const struct xt_option_entry ULOG_opts[] = { + {.name = "ulog-nlgroup", .id = O_ULOG_NLGROUP, .type = XTTYPE_UINT8, + .min = 1, .max = 32}, + {.name = "ulog-prefix", .id = O_ULOG_PREFIX, .type = XTTYPE_STRING, + .flags = XTOPT_PUT, XTOPT_POINTER(struct ipt_ulog_info, prefix), + .min = 1}, + {.name = "ulog-cprange", .id = O_ULOG_CPRANGE, .type = XTTYPE_UINT64}, + {.name = "ulog-qthreshold", .id = O_ULOG_QTHR, .type = XTTYPE_UINT64, + .min = 1, .max = ULOG_MAX_QLEN}, + XTOPT_TABLEEND, +}; + +static void ULOG_init(struct xt_entry_target *t) +{ + struct ipt_ulog_info *loginfo = (struct ipt_ulog_info *) t->data; + + loginfo->nl_group = ULOG_DEFAULT_NLGROUP; + loginfo->qthreshold = ULOG_DEFAULT_QTHRESHOLD; + +} + +static void ULOG_parse(struct xt_option_call *cb) +{ + struct ipt_ulog_info *loginfo = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_ULOG_NLGROUP: + loginfo->nl_group = 1 << (cb->val.u8 - 1); + break; + case O_ULOG_PREFIX: + if (strchr(cb->arg, '\n') != NULL) + xtables_error(PARAMETER_PROBLEM, + "Newlines not allowed in --ulog-prefix"); + break; + case O_ULOG_CPRANGE: + loginfo->copy_range = cb->val.u64; + break; + case O_ULOG_QTHR: + loginfo->qthreshold = cb->val.u64; + break; + } +} + +static void ULOG_save(const void *ip, const struct xt_entry_target *target) +{ + const struct ipt_ulog_info *loginfo + = (const struct ipt_ulog_info *) target->data; + + if (strcmp(loginfo->prefix, "") != 0) { + fputs(" --ulog-prefix", stdout); + xtables_save_string(loginfo->prefix); + } + + if (loginfo->nl_group != ULOG_DEFAULT_NLGROUP) + printf(" --ulog-nlgroup %d", ffs(loginfo->nl_group)); + if (loginfo->copy_range) + printf(" --ulog-cprange %u", (unsigned int)loginfo->copy_range); + + if (loginfo->qthreshold != ULOG_DEFAULT_QTHRESHOLD) + printf(" --ulog-qthreshold %u", (unsigned int)loginfo->qthreshold); +} + +static void ULOG_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct ipt_ulog_info *loginfo + = (const struct ipt_ulog_info *) target->data; + + printf(" ULOG "); + printf("copy_range %u nlgroup %d", (unsigned int)loginfo->copy_range, + ffs(loginfo->nl_group)); + if (strcmp(loginfo->prefix, "") != 0) + printf(" prefix \"%s\"", loginfo->prefix); + printf(" queue_threshold %u", (unsigned int)loginfo->qthreshold); +} + +static struct xtables_target ulog_tg_reg = { + .name = "ULOG", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(sizeof(struct ipt_ulog_info)), + .userspacesize = XT_ALIGN(sizeof(struct ipt_ulog_info)), + .help = ULOG_help, + .init = ULOG_init, + .print = ULOG_print, + .save = ULOG_save, + .x6_parse = ULOG_parse, + .x6_options = ULOG_opts, +}; + +void _init(void) +{ + xtables_register_target(&ulog_tg_reg); +} diff --git a/extensions/libipt_ULOG.man b/extensions/libipt_ULOG.man new file mode 100644 index 0000000..649b6e3 --- /dev/null +++ b/extensions/libipt_ULOG.man @@ -0,0 +1,27 @@ +This target provides userspace logging of matching packets. When this +target is set for a rule, the Linux kernel will multicast this packet +through a +.IR netlink +socket. One or more userspace processes may then subscribe to various +multicast groups and receive the packets. +Like LOG, this is a "non-terminating target", i.e. rule traversal +continues at the next rule. +.TP +\fB\-\-ulog\-nlgroup\fP \fInlgroup\fP +This specifies the netlink group (1-32) to which the packet is sent. +Default value is 1. +.TP +\fB\-\-ulog\-prefix\fP \fIprefix\fP +Prefix log messages with the specified prefix; up to 32 characters +long, and useful for distinguishing messages in the logs. +.TP +\fB\-\-ulog\-cprange\fP \fIsize\fP +Number of bytes to be copied to userspace. A value of 0 always copies +the entire packet, regardless of its size. Default is 0. +.TP +\fB\-\-ulog\-qthreshold\fP \fIsize\fP +Number of packet to queue inside kernel. Setting this value to, e.g. 10 +accumulates ten packets inside the kernel and transmits them as one +netlink multipart message to userspace. Default is 1 (for backwards +compatibility). +.br diff --git a/extensions/libipt_ah.c b/extensions/libipt_ah.c new file mode 100644 index 0000000..8cf167c --- /dev/null +++ b/extensions/libipt_ah.c @@ -0,0 +1,105 @@ +#include +#include +#include + +enum { + O_AHSPI = 0, +}; + +static void ah_help(void) +{ + printf( +"ah match options:\n" +"[!] --ahspi spi[:spi]\n" +" match spi (range)\n"); +} + +static const struct xt_option_entry ah_opts[] = { + {.name = "ahspi", .id = O_AHSPI, .type = XTTYPE_UINT32RC, + .flags = XTOPT_INVERT | XTOPT_PUT, + XTOPT_POINTER(struct ipt_ah, spis)}, + XTOPT_TABLEEND, +}; + +static void ah_parse(struct xt_option_call *cb) +{ + struct ipt_ah *ahinfo = cb->data; + + xtables_option_parse(cb); + if (cb->nvals == 1) + ahinfo->spis[1] = ahinfo->spis[0]; + if (cb->invert) + ahinfo->invflags |= IPT_AH_INV_SPI; +} + +static void +print_spis(const char *name, uint32_t min, uint32_t max, + int invert) +{ + const char *inv = invert ? "!" : ""; + + if (min != 0 || max != 0xFFFFFFFF || invert) { + printf("%s", name); + if (min == max) { + printf(":%s", inv); + printf("%u", min); + } else { + printf("s:%s", inv); + printf("%u",min); + printf(":"); + printf("%u",max); + } + } +} + +static void ah_print(const void *ip, const struct xt_entry_match *match, + int numeric) +{ + const struct ipt_ah *ah = (struct ipt_ah *)match->data; + + printf(" ah "); + print_spis("spi", ah->spis[0], ah->spis[1], + ah->invflags & IPT_AH_INV_SPI); + if (ah->invflags & ~IPT_AH_INV_MASK) + printf(" Unknown invflags: 0x%X", + ah->invflags & ~IPT_AH_INV_MASK); +} + +static void ah_save(const void *ip, const struct xt_entry_match *match) +{ + const struct ipt_ah *ahinfo = (struct ipt_ah *)match->data; + + if (!(ahinfo->spis[0] == 0 + && ahinfo->spis[1] == 0xFFFFFFFF)) { + printf("%s --ahspi ", + (ahinfo->invflags & IPT_AH_INV_SPI) ? " !" : ""); + if (ahinfo->spis[0] + != ahinfo->spis[1]) + printf("%u:%u", + ahinfo->spis[0], + ahinfo->spis[1]); + else + printf("%u", + ahinfo->spis[0]); + } + +} + +static struct xtables_match ah_mt_reg = { + .name = "ah", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(sizeof(struct ipt_ah)), + .userspacesize = XT_ALIGN(sizeof(struct ipt_ah)), + .help = ah_help, + .print = ah_print, + .save = ah_save, + .x6_parse = ah_parse, + .x6_options = ah_opts, +}; + +void +_init(void) +{ + xtables_register_match(&ah_mt_reg); +} diff --git a/extensions/libipt_ah.man b/extensions/libipt_ah.man new file mode 100644 index 0000000..d26455e --- /dev/null +++ b/extensions/libipt_ah.man @@ -0,0 +1,3 @@ +This module matches the SPIs in Authentication header of IPsec packets. +.TP +[\fB!\fP] \fB\-\-ahspi\fP \fIspi\fP[\fB:\fP\fIspi\fP] diff --git a/extensions/libipt_icmp.c b/extensions/libipt_icmp.c new file mode 100644 index 0000000..666e7da --- /dev/null +++ b/extensions/libipt_icmp.c @@ -0,0 +1,269 @@ +#include +#include +#include +#include +#include /* INT_MAX in ip6_tables.h */ +#include + +/* special hack for icmp-type 'any': + * Up to kernel <=2.4.20 the problem was: + * '-p icmp ' matches all icmp packets + * '-p icmp -m icmp' matches _only_ ICMP type 0 :( + * This is now fixed by initializing the field * to icmp type 0xFF + * See: https://bugzilla.netfilter.org/cgi-bin/bugzilla/show_bug.cgi?id=37 + */ + +enum { + O_ICMP_TYPE = 0, +}; + +struct icmp_names { + const char *name; + uint8_t type; + uint8_t code_min, code_max; +}; + +static const struct icmp_names icmp_codes[] = { + { "any", 0xFF, 0, 0xFF }, + { "echo-reply", 0, 0, 0xFF }, + /* Alias */ { "pong", 0, 0, 0xFF }, + + { "destination-unreachable", 3, 0, 0xFF }, + { "network-unreachable", 3, 0, 0 }, + { "host-unreachable", 3, 1, 1 }, + { "protocol-unreachable", 3, 2, 2 }, + { "port-unreachable", 3, 3, 3 }, + { "fragmentation-needed", 3, 4, 4 }, + { "source-route-failed", 3, 5, 5 }, + { "network-unknown", 3, 6, 6 }, + { "host-unknown", 3, 7, 7 }, + { "network-prohibited", 3, 9, 9 }, + { "host-prohibited", 3, 10, 10 }, + { "TOS-network-unreachable", 3, 11, 11 }, + { "TOS-host-unreachable", 3, 12, 12 }, + { "communication-prohibited", 3, 13, 13 }, + { "host-precedence-violation", 3, 14, 14 }, + { "precedence-cutoff", 3, 15, 15 }, + + { "source-quench", 4, 0, 0xFF }, + + { "redirect", 5, 0, 0xFF }, + { "network-redirect", 5, 0, 0 }, + { "host-redirect", 5, 1, 1 }, + { "TOS-network-redirect", 5, 2, 2 }, + { "TOS-host-redirect", 5, 3, 3 }, + + { "echo-request", 8, 0, 0xFF }, + /* Alias */ { "ping", 8, 0, 0xFF }, + + { "router-advertisement", 9, 0, 0xFF }, + + { "router-solicitation", 10, 0, 0xFF }, + + { "time-exceeded", 11, 0, 0xFF }, + /* Alias */ { "ttl-exceeded", 11, 0, 0xFF }, + { "ttl-zero-during-transit", 11, 0, 0 }, + { "ttl-zero-during-reassembly", 11, 1, 1 }, + + { "parameter-problem", 12, 0, 0xFF }, + { "ip-header-bad", 12, 0, 0 }, + { "required-option-missing", 12, 1, 1 }, + + { "timestamp-request", 13, 0, 0xFF }, + + { "timestamp-reply", 14, 0, 0xFF }, + + { "address-mask-request", 17, 0, 0xFF }, + + { "address-mask-reply", 18, 0, 0xFF } +}; + +static void +print_icmptypes(void) +{ + unsigned int i; + printf("Valid ICMP Types:"); + + for (i = 0; i < ARRAY_SIZE(icmp_codes); ++i) { + if (i && icmp_codes[i].type == icmp_codes[i-1].type) { + if (icmp_codes[i].code_min == icmp_codes[i-1].code_min + && (icmp_codes[i].code_max + == icmp_codes[i-1].code_max)) + printf(" (%s)", icmp_codes[i].name); + else + printf("\n %s", icmp_codes[i].name); + } + else + printf("\n%s", icmp_codes[i].name); + } + printf("\n"); +} + +static void icmp_help(void) +{ + printf( +"icmp match options:\n" +"[!] --icmp-type typename match icmp type\n" +"[!] --icmp-type type[/code] (or numeric type or type/code)\n"); + print_icmptypes(); +} + +static const struct xt_option_entry icmp_opts[] = { + {.name = "icmp-type", .id = O_ICMP_TYPE, .type = XTTYPE_STRING, + .flags = XTOPT_MAND | XTOPT_INVERT}, + XTOPT_TABLEEND, +}; + +static void +parse_icmp(const char *icmptype, uint8_t *type, uint8_t code[]) +{ + static const unsigned int limit = ARRAY_SIZE(icmp_codes); + unsigned int match = limit; + unsigned int i; + + for (i = 0; i < limit; i++) { + if (strncasecmp(icmp_codes[i].name, icmptype, strlen(icmptype)) + == 0) { + if (match != limit) + xtables_error(PARAMETER_PROBLEM, + "Ambiguous ICMP type `%s':" + " `%s' or `%s'?", + icmptype, + icmp_codes[match].name, + icmp_codes[i].name); + match = i; + } + } + + if (match != limit) { + *type = icmp_codes[match].type; + code[0] = icmp_codes[match].code_min; + code[1] = icmp_codes[match].code_max; + } else { + char *slash; + char buffer[strlen(icmptype) + 1]; + unsigned int number; + + strcpy(buffer, icmptype); + slash = strchr(buffer, '/'); + + if (slash) + *slash = '\0'; + + if (!xtables_strtoui(buffer, NULL, &number, 0, UINT8_MAX)) + xtables_error(PARAMETER_PROBLEM, + "Invalid ICMP type `%s'\n", buffer); + *type = number; + if (slash) { + if (!xtables_strtoui(slash+1, NULL, &number, 0, UINT8_MAX)) + xtables_error(PARAMETER_PROBLEM, + "Invalid ICMP code `%s'\n", + slash+1); + code[0] = code[1] = number; + } else { + code[0] = 0; + code[1] = 0xFF; + } + } +} + +static void icmp_init(struct xt_entry_match *m) +{ + struct ipt_icmp *icmpinfo = (struct ipt_icmp *)m->data; + + icmpinfo->type = 0xFF; + icmpinfo->code[1] = 0xFF; +} + +static void icmp_parse(struct xt_option_call *cb) +{ + struct ipt_icmp *icmpinfo = cb->data; + + xtables_option_parse(cb); + parse_icmp(cb->arg, &icmpinfo->type, icmpinfo->code); + if (cb->invert) + icmpinfo->invflags |= IPT_ICMP_INV; +} + +static void print_icmptype(uint8_t type, + uint8_t code_min, uint8_t code_max, + int invert, + int numeric) +{ + if (!numeric) { + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(icmp_codes); ++i) + if (icmp_codes[i].type == type + && icmp_codes[i].code_min == code_min + && icmp_codes[i].code_max == code_max) + break; + + if (i != ARRAY_SIZE(icmp_codes)) { + printf(" %s%s", + invert ? "!" : "", + icmp_codes[i].name); + return; + } + } + + if (invert) + printf(" !"); + + printf("type %u", type); + if (code_min == code_max) + printf(" code %u", code_min); + else if (code_min != 0 || code_max != 0xFF) + printf(" codes %u-%u", code_min, code_max); +} + +static void icmp_print(const void *ip, const struct xt_entry_match *match, + int numeric) +{ + const struct ipt_icmp *icmp = (struct ipt_icmp *)match->data; + + printf(" icmp"); + print_icmptype(icmp->type, icmp->code[0], icmp->code[1], + icmp->invflags & IPT_ICMP_INV, + numeric); + + if (icmp->invflags & ~IPT_ICMP_INV) + printf(" Unknown invflags: 0x%X", + icmp->invflags & ~IPT_ICMP_INV); +} + +static void icmp_save(const void *ip, const struct xt_entry_match *match) +{ + const struct ipt_icmp *icmp = (struct ipt_icmp *)match->data; + + if (icmp->invflags & IPT_ICMP_INV) + printf(" !"); + + /* special hack for 'any' case */ + if (icmp->type == 0xFF) { + printf(" --icmp-type any"); + } else { + printf(" --icmp-type %u", icmp->type); + if (icmp->code[0] != 0 || icmp->code[1] != 0xFF) + printf("/%u", icmp->code[0]); + } +} + +static struct xtables_match icmp_mt_reg = { + .name = "icmp", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(sizeof(struct ipt_icmp)), + .userspacesize = XT_ALIGN(sizeof(struct ipt_icmp)), + .help = icmp_help, + .init = icmp_init, + .print = icmp_print, + .save = icmp_save, + .x6_parse = icmp_parse, + .x6_options = icmp_opts, +}; + +void _init(void) +{ + xtables_register_match(&icmp_mt_reg); +} diff --git a/extensions/libipt_icmp.man b/extensions/libipt_icmp.man new file mode 100644 index 0000000..1039704 --- /dev/null +++ b/extensions/libipt_icmp.man @@ -0,0 +1,9 @@ +This extension can be used if `\-\-protocol icmp' is specified. It +provides the following option: +.TP +[\fB!\fP] \fB\-\-icmp\-type\fP {\fItype\fP[\fB/\fP\fIcode\fP]|\fItypename\fP} +This allows specification of the ICMP type, which can be a numeric +ICMP type, type/code pair, or one of the ICMP type names shown by the command +.nf + iptables \-p icmp \-h +.fi diff --git a/extensions/libipt_realm.c b/extensions/libipt_realm.c new file mode 100644 index 0000000..a8d9dda --- /dev/null +++ b/extensions/libipt_realm.c @@ -0,0 +1,127 @@ +#include +#include +#include +#include +#if defined(__GLIBC__) && __GLIBC__ == 2 +#include +#else +#include +#endif +#include +#include + +enum { + O_REALM = 0, +}; + +static void realm_help(void) +{ + printf( +"realm match options:\n" +"[!] --realm value[/mask]\n" +" Match realm\n"); +} + +static const struct xt_option_entry realm_opts[] = { + {.name = "realm", .id = O_REALM, .type = XTTYPE_STRING, + .flags = XTOPT_MAND | XTOPT_INVERT}, + XTOPT_TABLEEND, +}; + +/* array of realms from /etc/iproute2/rt_realms */ +static struct xtables_lmap *realms; + +static void realm_init(struct xt_entry_match *m) +{ + const char file[] = "/etc/iproute2/rt_realms"; + realms = xtables_lmap_init(file); + if (realms == NULL && errno != ENOENT) + fprintf(stderr, "Warning: %s: %s\n", file, strerror(errno)); +} + +static void realm_parse(struct xt_option_call *cb) +{ + struct xt_realm_info *realminfo = cb->data; + int id; + char *end; + + xtables_option_parse(cb); + realminfo->id = strtoul(cb->arg, &end, 0); + if (end != cb->arg && (*end == '/' || *end == '\0')) { + if (*end == '/') + realminfo->mask = strtoul(end+1, &end, 0); + else + realminfo->mask = 0xffffffff; + if (*end != '\0' || end == cb->arg) + xtables_error(PARAMETER_PROBLEM, + "Bad realm value \"%s\"", cb->arg); + } else { + id = xtables_lmap_name2id(realms, cb->arg); + if (id == -1) + xtables_error(PARAMETER_PROBLEM, + "Realm \"%s\" not found", cb->arg); + realminfo->id = id; + realminfo->mask = 0xffffffff; + } + if (cb->invert) + realminfo->invert = 1; +} + +static void +print_realm(unsigned long id, unsigned long mask, int numeric) +{ + const char* name = NULL; + + if (mask != 0xffffffff) + printf(" 0x%lx/0x%lx", id, mask); + else { + if (numeric == 0) + name = xtables_lmap_id2name(realms, id); + if (name) + printf(" %s", name); + else + printf(" 0x%lx", id); + } +} + +static void realm_print(const void *ip, const struct xt_entry_match *match, + int numeric) +{ + const struct xt_realm_info *ri = (const void *)match->data; + + if (ri->invert) + printf(" !"); + + printf(" realm"); + print_realm(ri->id, ri->mask, numeric); +} + +static void realm_save(const void *ip, const struct xt_entry_match *match) +{ + const struct xt_realm_info *ri = (const void *)match->data; + + if (ri->invert) + printf(" !"); + + printf(" --realm"); + print_realm(ri->id, ri->mask, 0); +} + +static struct xtables_match realm_mt_reg = { + .name = "realm", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(sizeof(struct xt_realm_info)), + .userspacesize = XT_ALIGN(sizeof(struct xt_realm_info)), + .help = realm_help, + .init = realm_init, + .print = realm_print, + .save = realm_save, + .x6_parse = realm_parse, + .x6_options = realm_opts, +}; + +void _init(void) +{ + xtables_register_match(&realm_mt_reg); +} diff --git a/extensions/libipt_realm.man b/extensions/libipt_realm.man new file mode 100644 index 0000000..a40b1ad --- /dev/null +++ b/extensions/libipt_realm.man @@ -0,0 +1,7 @@ +This matches the routing realm. Routing realms are used in complex routing +setups involving dynamic routing protocols like BGP. +.TP +[\fB!\fP] \fB\-\-realm\fP \fIvalue\fP[\fB/\fP\fImask\fP] +Matches a given realm number (and optionally mask). If not a number, value +can be a named realm from /etc/iproute2/rt_realms (mask can not be used in +that case). diff --git a/extensions/libipt_ttl.c b/extensions/libipt_ttl.c new file mode 100644 index 0000000..5fe08cc --- /dev/null +++ b/extensions/libipt_ttl.c @@ -0,0 +1,135 @@ +/* Shared library add-on to iptables to add TTL matching support + * (C) 2000 by Harald Welte + * + * This program is released under the terms of GNU GPL */ +#include +#include +#include + +enum { + O_TTL_EQ = 0, + O_TTL_LT, + O_TTL_GT, + F_TTL_EQ = 1 << O_TTL_EQ, + F_TTL_LT = 1 << O_TTL_LT, + F_TTL_GT = 1 << O_TTL_GT, + F_ANY = F_TTL_EQ | F_TTL_LT | F_TTL_GT, +}; + +static void ttl_help(void) +{ + printf( +"ttl match options:\n" +"[!] --ttl-eq value Match time to live value\n" +" --ttl-lt value Match TTL < value\n" +" --ttl-gt value Match TTL > value\n"); +} + +static void ttl_parse(struct xt_option_call *cb) +{ + struct ipt_ttl_info *info = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_TTL_EQ: + info->mode = cb->invert ? IPT_TTL_NE : IPT_TTL_EQ; + break; + case O_TTL_LT: + info->mode = IPT_TTL_LT; + break; + case O_TTL_GT: + info->mode = IPT_TTL_GT; + break; + } +} + +static void ttl_check(struct xt_fcheck_call *cb) +{ + if (!(cb->xflags & F_ANY)) + xtables_error(PARAMETER_PROBLEM, + "TTL match: You must specify one of " + "`--ttl-eq', `--ttl-lt', `--ttl-gt"); +} + +static void ttl_print(const void *ip, const struct xt_entry_match *match, + int numeric) +{ + const struct ipt_ttl_info *info = + (struct ipt_ttl_info *) match->data; + + printf(" TTL match "); + switch (info->mode) { + case IPT_TTL_EQ: + printf("TTL =="); + break; + case IPT_TTL_NE: + printf("TTL !="); + break; + case IPT_TTL_LT: + printf("TTL <"); + break; + case IPT_TTL_GT: + printf("TTL >"); + break; + } + printf(" %u", info->ttl); +} + +static void ttl_save(const void *ip, const struct xt_entry_match *match) +{ + const struct ipt_ttl_info *info = + (struct ipt_ttl_info *) match->data; + + switch (info->mode) { + case IPT_TTL_EQ: + printf(" --ttl-eq"); + break; + case IPT_TTL_NE: + printf(" ! --ttl-eq"); + break; + case IPT_TTL_LT: + printf(" --ttl-lt"); + break; + case IPT_TTL_GT: + printf(" --ttl-gt"); + break; + default: + /* error */ + break; + } + printf(" %u", info->ttl); +} + +#define s struct ipt_ttl_info +static const struct xt_option_entry ttl_opts[] = { + {.name = "ttl-lt", .id = O_TTL_LT, .excl = F_ANY, .type = XTTYPE_UINT8, + .flags = XTOPT_PUT, XTOPT_POINTER(s, ttl)}, + {.name = "ttl-gt", .id = O_TTL_GT, .excl = F_ANY, .type = XTTYPE_UINT8, + .flags = XTOPT_PUT, XTOPT_POINTER(s, ttl)}, + {.name = "ttl-eq", .id = O_TTL_EQ, .excl = F_ANY, .type = XTTYPE_UINT8, + .flags = XTOPT_INVERT | XTOPT_PUT, XTOPT_POINTER(s, ttl)}, + {.name = "ttl", .id = O_TTL_EQ, .excl = F_ANY, .type = XTTYPE_UINT8, + .flags = XTOPT_PUT, XTOPT_POINTER(s, ttl)}, + XTOPT_TABLEEND, +}; +#undef s + +static struct xtables_match ttl_mt_reg = { + .name = "ttl", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(sizeof(struct ipt_ttl_info)), + .userspacesize = XT_ALIGN(sizeof(struct ipt_ttl_info)), + .help = ttl_help, + .print = ttl_print, + .save = ttl_save, + .x6_parse = ttl_parse, + .x6_fcheck = ttl_check, + .x6_options = ttl_opts, +}; + + +void _init(void) +{ + xtables_register_match(&ttl_mt_reg); +} diff --git a/extensions/libipt_ttl.man b/extensions/libipt_ttl.man new file mode 100644 index 0000000..1f32277 --- /dev/null +++ b/extensions/libipt_ttl.man @@ -0,0 +1,10 @@ +This module matches the time to live field in the IP header. +.TP +[\fB!\fP] \fB\-\-ttl\-eq\fP \fIttl\fP +Matches the given TTL value. +.TP +\fB\-\-ttl\-gt\fP \fIttl\fP +Matches if TTL is greater than the given TTL value. +.TP +\fB\-\-ttl\-lt\fP \fIttl\fP +Matches if TTL is less than the given TTL value. diff --git a/extensions/libipt_unclean.c b/extensions/libipt_unclean.c new file mode 100644 index 0000000..bc4a4a0 --- /dev/null +++ b/extensions/libipt_unclean.c @@ -0,0 +1,15 @@ +/* Shared library add-on to iptables for unclean. */ +#include + +static struct xtables_match unclean_mt_reg = { + .name = "unclean", + .version = XTABLES_VERSION, + .family = NFPROTO_IPV4, + .size = XT_ALIGN(0), + .userspacesize = XT_ALIGN(0), +}; + +void _init(void) +{ + xtables_register_match(&unclean_mt_reg); +} diff --git a/extensions/libipt_unclean.man b/extensions/libipt_unclean.man new file mode 100644 index 0000000..3fecd55 --- /dev/null +++ b/extensions/libipt_unclean.man @@ -0,0 +1,2 @@ +This module takes no options, but attempts to match packets which seem +malformed or unusual. This is regarded as experimental. diff --git a/extensions/libxt_AUDIT.c b/extensions/libxt_AUDIT.c new file mode 100644 index 0000000..86a61cb --- /dev/null +++ b/extensions/libxt_AUDIT.c @@ -0,0 +1,101 @@ +/* Shared library add-on to xtables for AUDIT + * + * (C) 2010-2011, Thomas Graf + * (C) 2010-2011, Red Hat, Inc. + * + * This program is distributed under the terms of GNU GPL v2, 1991 + */ +#include +#include +#include +#include + +enum { + O_AUDIT_TYPE = 0, +}; + +static void audit_help(void) +{ + printf( +"AUDIT target options\n" +" --type TYPE Action type to be recorded.\n"); +} + +static const struct xt_option_entry audit_opts[] = { + {.name = "type", .id = O_AUDIT_TYPE, .type = XTTYPE_STRING, + .flags = XTOPT_MAND}, + XTOPT_TABLEEND, +}; + +static void audit_parse(struct xt_option_call *cb) +{ + struct xt_audit_info *einfo = cb->data; + + xtables_option_parse(cb); + if (strcasecmp(cb->arg, "accept") == 0) + einfo->type = XT_AUDIT_TYPE_ACCEPT; + else if (strcasecmp(cb->arg, "drop") == 0) + einfo->type = XT_AUDIT_TYPE_DROP; + else if (strcasecmp(cb->arg, "reject") == 0) + einfo->type = XT_AUDIT_TYPE_REJECT; + else + xtables_error(PARAMETER_PROBLEM, + "Bad action type value \"%s\"", cb->arg); +} + +static void audit_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct xt_audit_info *einfo = + (const struct xt_audit_info *)target->data; + + printf(" AUDIT "); + + switch(einfo->type) { + case XT_AUDIT_TYPE_ACCEPT: + printf("accept"); + break; + case XT_AUDIT_TYPE_DROP: + printf("drop"); + break; + case XT_AUDIT_TYPE_REJECT: + printf("reject"); + break; + } +} + +static void audit_save(const void *ip, const struct xt_entry_target *target) +{ + const struct xt_audit_info *einfo = + (const struct xt_audit_info *)target->data; + + switch(einfo->type) { + case XT_AUDIT_TYPE_ACCEPT: + printf(" --type accept"); + break; + case XT_AUDIT_TYPE_DROP: + printf(" --type drop"); + break; + case XT_AUDIT_TYPE_REJECT: + printf(" --type reject"); + break; + } +} + +static struct xtables_target audit_tg_reg = { + .name = "AUDIT", + .version = XTABLES_VERSION, + .family = NFPROTO_UNSPEC, + .size = XT_ALIGN(sizeof(struct xt_audit_info)), + .userspacesize = XT_ALIGN(sizeof(struct xt_audit_info)), + .help = audit_help, + .print = audit_print, + .save = audit_save, + .x6_parse = audit_parse, + .x6_options = audit_opts, +}; + +void _init(void) +{ + xtables_register_target(&audit_tg_reg); +} diff --git a/extensions/libxt_AUDIT.man b/extensions/libxt_AUDIT.man new file mode 100644 index 0000000..cd79696 --- /dev/null +++ b/extensions/libxt_AUDIT.man @@ -0,0 +1,14 @@ +This target allows to create audit records for packets hitting the target. +It can be used to record accepted, dropped, and rejected packets. See +auditd(8) for additional details. +.TP +\fB\-\-type\fP {\fBaccept\fP|\fBdrop\fP|\fBreject\fP} +Set type of audit record. +.PP +Example: +.IP +iptables \-N AUDIT_DROP +.IP +iptables \-A AUDIT_DROP \-j AUDIT \-\-type drop +.IP +iptables \-A AUDIT_DROP \-j DROP diff --git a/extensions/libxt_CHECKSUM.c b/extensions/libxt_CHECKSUM.c new file mode 100644 index 0000000..df9f9b3 --- /dev/null +++ b/extensions/libxt_CHECKSUM.c @@ -0,0 +1,77 @@ +/* Shared library add-on to xtables for CHECKSUM + * + * (C) 2002 by Harald Welte + * (C) 2010 by Red Hat, Inc + * Author: Michael S. Tsirkin + * + * This program is distributed under the terms of GNU GPL v2, 1991 + * + * libxt_CHECKSUM.c borrowed some bits from libipt_ECN.c + */ +#include +#include +#include + +enum { + O_CHECKSUM_FILL = 0, +}; + +static void CHECKSUM_help(void) +{ + printf( +"CHECKSUM target options\n" +" --checksum-fill Fill in packet checksum.\n"); +} + +static const struct xt_option_entry CHECKSUM_opts[] = { + {.name = "checksum-fill", .id = O_CHECKSUM_FILL, + .flags = XTOPT_MAND, .type = XTTYPE_NONE}, + XTOPT_TABLEEND, +}; + +static void CHECKSUM_parse(struct xt_option_call *cb) +{ + struct xt_CHECKSUM_info *einfo = cb->data; + + xtables_option_parse(cb); + einfo->operation = XT_CHECKSUM_OP_FILL; +} + +static void CHECKSUM_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct xt_CHECKSUM_info *einfo = + (const struct xt_CHECKSUM_info *)target->data; + + printf(" CHECKSUM"); + + if (einfo->operation & XT_CHECKSUM_OP_FILL) + printf(" fill"); +} + +static void CHECKSUM_save(const void *ip, const struct xt_entry_target *target) +{ + const struct xt_CHECKSUM_info *einfo = + (const struct xt_CHECKSUM_info *)target->data; + + if (einfo->operation & XT_CHECKSUM_OP_FILL) + printf(" --checksum-fill"); +} + +static struct xtables_target checksum_tg_reg = { + .name = "CHECKSUM", + .version = XTABLES_VERSION, + .family = NFPROTO_UNSPEC, + .size = XT_ALIGN(sizeof(struct xt_CHECKSUM_info)), + .userspacesize = XT_ALIGN(sizeof(struct xt_CHECKSUM_info)), + .help = CHECKSUM_help, + .print = CHECKSUM_print, + .save = CHECKSUM_save, + .x6_parse = CHECKSUM_parse, + .x6_options = CHECKSUM_opts, +}; + +void _init(void) +{ + xtables_register_target(&checksum_tg_reg); +} diff --git a/extensions/libxt_CHECKSUM.man b/extensions/libxt_CHECKSUM.man new file mode 100644 index 0000000..92ae700 --- /dev/null +++ b/extensions/libxt_CHECKSUM.man @@ -0,0 +1,8 @@ +This target allows to selectively work around broken/old applications. +It can only be used in the mangle table. +.TP +\fB\-\-checksum\-fill\fP +Compute and fill in the checksum in a packet that lacks a checksum. +This is particularly useful, if you need to work around old applications +such as dhcp clients, that do not work well with checksum offloads, +but don't want to disable checksum offload in your device. diff --git a/extensions/libxt_CLASSIFY.c b/extensions/libxt_CLASSIFY.c new file mode 100644 index 0000000..ee0f9e1 --- /dev/null +++ b/extensions/libxt_CLASSIFY.c @@ -0,0 +1,88 @@ +#include +#include +#include +#include + +enum { + O_SET_CLASS = 0, +}; + +static void +CLASSIFY_help(void) +{ + printf( +"CLASSIFY target options:\n" +"--set-class MAJOR:MINOR Set skb->priority value (always hexadecimal!)\n"); +} + +static const struct xt_option_entry CLASSIFY_opts[] = { + {.name = "set-class", .id = O_SET_CLASS, .type = XTTYPE_STRING, + .flags = XTOPT_MAND}, + XTOPT_TABLEEND, +}; + +static int CLASSIFY_string_to_priority(const char *s, unsigned int *p) +{ + unsigned int i, j; + + if (sscanf(s, "%x:%x", &i, &j) != 2) + return 1; + + *p = TC_H_MAKE(i<<16, j); + return 0; +} + +static void CLASSIFY_parse(struct xt_option_call *cb) +{ + struct xt_classify_target_info *clinfo = cb->data; + + xtables_option_parse(cb); + if (CLASSIFY_string_to_priority(cb->arg, &clinfo->priority)) + xtables_error(PARAMETER_PROBLEM, + "Bad class value \"%s\"", cb->arg); +} + +static void +CLASSIFY_print_class(unsigned int priority, int numeric) +{ + printf(" %x:%x", TC_H_MAJ(priority)>>16, TC_H_MIN(priority)); +} + +static void +CLASSIFY_print(const void *ip, + const struct xt_entry_target *target, + int numeric) +{ + const struct xt_classify_target_info *clinfo = + (const struct xt_classify_target_info *)target->data; + printf(" CLASSIFY set"); + CLASSIFY_print_class(clinfo->priority, numeric); +} + +static void +CLASSIFY_save(const void *ip, const struct xt_entry_target *target) +{ + const struct xt_classify_target_info *clinfo = + (const struct xt_classify_target_info *)target->data; + + printf(" --set-class %.4x:%.4x", + TC_H_MAJ(clinfo->priority)>>16, TC_H_MIN(clinfo->priority)); +} + +static struct xtables_target classify_target = { + .family = NFPROTO_UNSPEC, + .name = "CLASSIFY", + .version = XTABLES_VERSION, + .size = XT_ALIGN(sizeof(struct xt_classify_target_info)), + .userspacesize = XT_ALIGN(sizeof(struct xt_classify_target_info)), + .help = CLASSIFY_help, + .print = CLASSIFY_print, + .save = CLASSIFY_save, + .x6_parse = CLASSIFY_parse, + .x6_options = CLASSIFY_opts, +}; + +void _init(void) +{ + xtables_register_target(&classify_target); +} diff --git a/extensions/libxt_CLASSIFY.man b/extensions/libxt_CLASSIFY.man new file mode 100644 index 0000000..0270fd1 --- /dev/null +++ b/extensions/libxt_CLASSIFY.man @@ -0,0 +1,5 @@ +This module allows you to set the skb\->priority value (and thus classify the packet into a specific CBQ class). +.TP +\fB\-\-set\-class\fP \fImajor\fP\fB:\fP\fIminor\fP +Set the major and minor class value. The values are always interpreted as +hexadecimal even if no 0x prefix is given. diff --git a/extensions/libxt_CONNMARK.c b/extensions/libxt_CONNMARK.c new file mode 100644 index 0000000..5d5351e --- /dev/null +++ b/extensions/libxt_CONNMARK.c @@ -0,0 +1,386 @@ +/* Shared library add-on to iptables to add CONNMARK target support. + * + * (C) 2002,2004 MARA Systems AB + * by Henrik Nordstrom + * + * Version 1.1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include +#include +#include + +struct xt_connmark_target_info { + unsigned long mark; + unsigned long mask; + uint8_t mode; +}; + +enum { + O_SET_MARK = 0, + O_SAVE_MARK, + O_RESTORE_MARK, + O_AND_MARK, + O_OR_MARK, + O_XOR_MARK, + O_SET_XMARK, + O_CTMASK, + O_NFMASK, + O_MASK, + F_SET_MARK = 1 << O_SET_MARK, + F_SAVE_MARK = 1 << O_SAVE_MARK, + F_RESTORE_MARK = 1 << O_RESTORE_MARK, + F_AND_MARK = 1 << O_AND_MARK, + F_OR_MARK = 1 << O_OR_MARK, + F_XOR_MARK = 1 << O_XOR_MARK, + F_SET_XMARK = 1 << O_SET_XMARK, + F_CTMASK = 1 << O_CTMASK, + F_NFMASK = 1 << O_NFMASK, + F_MASK = 1 << O_MASK, + F_OP_ANY = F_SET_MARK | F_SAVE_MARK | F_RESTORE_MARK | + F_AND_MARK | F_OR_MARK | F_XOR_MARK | F_SET_XMARK, +}; + +static void CONNMARK_help(void) +{ + printf( +"CONNMARK target options:\n" +" --set-mark value[/mask] Set conntrack mark value\n" +" --save-mark [--mask mask] Save the packet nfmark in the connection\n" +" --restore-mark [--mask mask] Restore saved nfmark value\n"); +} + +#define s struct xt_connmark_target_info +static const struct xt_option_entry CONNMARK_opts[] = { + {.name = "set-mark", .id = O_SET_MARK, .type = XTTYPE_MARKMASK32, + .excl = F_OP_ANY}, + {.name = "save-mark", .id = O_SAVE_MARK, .type = XTTYPE_NONE, + .excl = F_OP_ANY}, + {.name = "restore-mark", .id = O_RESTORE_MARK, .type = XTTYPE_NONE, + .excl = F_OP_ANY}, + {.name = "mask", .id = O_MASK, .type = XTTYPE_UINT32}, + XTOPT_TABLEEND, +}; +#undef s + +#define s struct xt_connmark_tginfo1 +static const struct xt_option_entry connmark_tg_opts[] = { + {.name = "set-xmark", .id = O_SET_XMARK, .type = XTTYPE_MARKMASK32, + .excl = F_OP_ANY}, + {.name = "set-mark", .id = O_SET_MARK, .type = XTTYPE_MARKMASK32, + .excl = F_OP_ANY}, + {.name = "and-mark", .id = O_AND_MARK, .type = XTTYPE_UINT32, + .excl = F_OP_ANY}, + {.name = "or-mark", .id = O_OR_MARK, .type = XTTYPE_UINT32, + .excl = F_OP_ANY}, + {.name = "xor-mark", .id = O_XOR_MARK, .type = XTTYPE_UINT32, + .excl = F_OP_ANY}, + {.name = "save-mark", .id = O_SAVE_MARK, .type = XTTYPE_NONE, + .excl = F_OP_ANY}, + {.name = "restore-mark", .id = O_RESTORE_MARK, .type = XTTYPE_NONE, + .excl = F_OP_ANY}, + {.name = "ctmask", .id = O_CTMASK, .type = XTTYPE_UINT32, + .excl = F_MASK, .flags = XTOPT_PUT, XTOPT_POINTER(s, ctmask)}, + {.name = "nfmask", .id = O_NFMASK, .type = XTTYPE_UINT32, + .excl = F_MASK, .flags = XTOPT_PUT, XTOPT_POINTER(s, nfmask)}, + {.name = "mask", .id = O_MASK, .type = XTTYPE_UINT32, + .excl = F_CTMASK | F_NFMASK}, + XTOPT_TABLEEND, +}; +#undef s + +static void connmark_tg_help(void) +{ + printf( +"CONNMARK target options:\n" +" --set-xmark value[/ctmask] Zero mask bits and XOR ctmark with value\n" +" --save-mark [--ctmask mask] [--nfmask mask]\n" +" Copy ctmark to nfmark using masks\n" +" --restore-mark [--ctmask mask] [--nfmask mask]\n" +" Copy nfmark to ctmark using masks\n" +" --set-mark value[/mask] Set conntrack mark value\n" +" --save-mark [--mask mask] Save the packet nfmark in the connection\n" +" --restore-mark [--mask mask] Restore saved nfmark value\n" +" --and-mark value Binary AND the ctmark with bits\n" +" --or-mark value Binary OR the ctmark with bits\n" +" --xor-mark value Binary XOR the ctmark with bits\n" +); +} + +static void connmark_tg_init(struct xt_entry_target *target) +{ + struct xt_connmark_tginfo1 *info = (void *)target->data; + + /* + * Need these defaults for --save-mark/--restore-mark if no + * --ctmark or --nfmask is given. + */ + info->ctmask = UINT32_MAX; + info->nfmask = UINT32_MAX; +} + +static void CONNMARK_parse(struct xt_option_call *cb) +{ + struct xt_connmark_target_info *markinfo = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_SET_MARK: + markinfo->mode = XT_CONNMARK_SET; + markinfo->mark = cb->val.mark; + markinfo->mask = cb->val.mask; + break; + case O_SAVE_MARK: + markinfo->mode = XT_CONNMARK_SAVE; + break; + case O_RESTORE_MARK: + markinfo->mode = XT_CONNMARK_RESTORE; + break; + case O_MASK: + markinfo->mask = cb->val.u32; + break; + } +} + +static void connmark_tg_parse(struct xt_option_call *cb) +{ + struct xt_connmark_tginfo1 *info = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_SET_XMARK: + info->mode = XT_CONNMARK_SET; + info->ctmark = cb->val.mark; + info->ctmask = cb->val.mask; + break; + case O_SET_MARK: + info->mode = XT_CONNMARK_SET; + info->ctmark = cb->val.mark; + info->ctmask = cb->val.mark | cb->val.mask; + break; + case O_AND_MARK: + info->mode = XT_CONNMARK_SET; + info->ctmark = 0; + info->ctmask = ~cb->val.u32; + break; + case O_OR_MARK: + info->mode = XT_CONNMARK_SET; + info->ctmark = cb->val.u32; + info->ctmask = cb->val.u32; + break; + case O_XOR_MARK: + info->mode = XT_CONNMARK_SET; + info->ctmark = cb->val.u32; + info->ctmask = 0; + break; + case O_SAVE_MARK: + info->mode = XT_CONNMARK_SAVE; + break; + case O_RESTORE_MARK: + info->mode = XT_CONNMARK_RESTORE; + break; + case O_MASK: + info->nfmask = info->ctmask = cb->val.u32; + break; + } +} + +static void connmark_tg_check(struct xt_fcheck_call *cb) +{ + if (!(cb->xflags & F_OP_ANY)) + xtables_error(PARAMETER_PROBLEM, + "CONNMARK target: No operation specified"); +} + +static void +print_mark(unsigned long mark) +{ + printf("0x%lx", mark); +} + +static void +print_mask(const char *text, unsigned long mask) +{ + if (mask != 0xffffffffUL) + printf("%s0x%lx", text, mask); +} + +static void CONNMARK_print(const void *ip, + const struct xt_entry_target *target, int numeric) +{ + const struct xt_connmark_target_info *markinfo = + (const struct xt_connmark_target_info *)target->data; + switch (markinfo->mode) { + case XT_CONNMARK_SET: + printf(" CONNMARK set "); + print_mark(markinfo->mark); + print_mask("/", markinfo->mask); + break; + case XT_CONNMARK_SAVE: + printf(" CONNMARK save "); + print_mask("mask ", markinfo->mask); + break; + case XT_CONNMARK_RESTORE: + printf(" CONNMARK restore "); + print_mask("mask ", markinfo->mask); + break; + default: + printf(" ERROR: UNKNOWN CONNMARK MODE"); + break; + } +} + +static void +connmark_tg_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct xt_connmark_tginfo1 *info = (const void *)target->data; + + switch (info->mode) { + case XT_CONNMARK_SET: + if (info->ctmark == 0) + printf(" CONNMARK and 0x%x", + (unsigned int)(uint32_t)~info->ctmask); + else if (info->ctmark == info->ctmask) + printf(" CONNMARK or 0x%x", info->ctmark); + else if (info->ctmask == 0) + printf(" CONNMARK xor 0x%x", info->ctmark); + else if (info->ctmask == 0xFFFFFFFFU) + printf(" CONNMARK set 0x%x", info->ctmark); + else + printf(" CONNMARK xset 0x%x/0x%x", + info->ctmark, info->ctmask); + break; + case XT_CONNMARK_SAVE: + if (info->nfmask == UINT32_MAX && info->ctmask == UINT32_MAX) + printf(" CONNMARK save"); + else if (info->nfmask == info->ctmask) + printf(" CONNMARK save mask 0x%x", info->nfmask); + else + printf(" CONNMARK save nfmask 0x%x ctmask ~0x%x", + info->nfmask, info->ctmask); + break; + case XT_CONNMARK_RESTORE: + if (info->ctmask == UINT32_MAX && info->nfmask == UINT32_MAX) + printf(" CONNMARK restore"); + else if (info->ctmask == info->nfmask) + printf(" CONNMARK restore mask 0x%x", info->ctmask); + else + printf(" CONNMARK restore ctmask 0x%x nfmask ~0x%x", + info->ctmask, info->nfmask); + break; + + default: + printf(" ERROR: UNKNOWN CONNMARK MODE"); + break; + } +} + +static void CONNMARK_save(const void *ip, const struct xt_entry_target *target) +{ + const struct xt_connmark_target_info *markinfo = + (const struct xt_connmark_target_info *)target->data; + + switch (markinfo->mode) { + case XT_CONNMARK_SET: + printf(" --set-mark "); + print_mark(markinfo->mark); + print_mask("/", markinfo->mask); + break; + case XT_CONNMARK_SAVE: + printf(" --save-mark "); + print_mask("--mask ", markinfo->mask); + break; + case XT_CONNMARK_RESTORE: + printf(" --restore-mark "); + print_mask("--mask ", markinfo->mask); + break; + default: + printf(" ERROR: UNKNOWN CONNMARK MODE"); + break; + } +} + +static void CONNMARK_init(struct xt_entry_target *t) +{ + struct xt_connmark_target_info *markinfo + = (struct xt_connmark_target_info *)t->data; + + markinfo->mask = 0xffffffffUL; +} + +static void +connmark_tg_save(const void *ip, const struct xt_entry_target *target) +{ + const struct xt_connmark_tginfo1 *info = (const void *)target->data; + + switch (info->mode) { + case XT_CONNMARK_SET: + printf(" --set-xmark 0x%x/0x%x", info->ctmark, info->ctmask); + break; + case XT_CONNMARK_SAVE: + printf(" --save-mark --nfmask 0x%x --ctmask 0x%x", + info->nfmask, info->ctmask); + break; + case XT_CONNMARK_RESTORE: + printf(" --restore-mark --nfmask 0x%x --ctmask 0x%x", + info->nfmask, info->ctmask); + break; + default: + printf(" ERROR: UNKNOWN CONNMARK MODE"); + break; + } +} + +static struct xtables_target connmark_tg_reg[] = { + { + .family = NFPROTO_UNSPEC, + .name = "CONNMARK", + .revision = 0, + .version = XTABLES_VERSION, + .size = XT_ALIGN(sizeof(struct xt_connmark_target_info)), + .userspacesize = XT_ALIGN(sizeof(struct xt_connmark_target_info)), + .help = CONNMARK_help, + .init = CONNMARK_init, + .print = CONNMARK_print, + .save = CONNMARK_save, + .x6_parse = CONNMARK_parse, + .x6_fcheck = connmark_tg_check, + .x6_options = CONNMARK_opts, + }, + { + .version = XTABLES_VERSION, + .name = "CONNMARK", + .revision = 1, + .family = NFPROTO_UNSPEC, + .size = XT_ALIGN(sizeof(struct xt_connmark_tginfo1)), + .userspacesize = XT_ALIGN(sizeof(struct xt_connmark_tginfo1)), + .help = connmark_tg_help, + .init = connmark_tg_init, + .print = connmark_tg_print, + .save = connmark_tg_save, + .x6_parse = connmark_tg_parse, + .x6_fcheck = connmark_tg_check, + .x6_options = connmark_tg_opts, + }, +}; + +void _init(void) +{ + xtables_register_targets(connmark_tg_reg, ARRAY_SIZE(connmark_tg_reg)); +} diff --git a/extensions/libxt_CONNMARK.man b/extensions/libxt_CONNMARK.man new file mode 100644 index 0000000..9317923 --- /dev/null +++ b/extensions/libxt_CONNMARK.man @@ -0,0 +1,53 @@ +This module sets the netfilter mark value associated with a connection. The +mark is 32 bits wide. +.TP +\fB\-\-set\-xmark\fP \fIvalue\fP[\fB/\fP\fImask\fP] +Zero out the bits given by \fImask\fP and XOR \fIvalue\fP into the ctmark. +.TP +\fB\-\-save\-mark\fP [\fB\-\-nfmask\fP \fInfmask\fP] [\fB\-\-ctmask\fP \fIctmask\fP] +Copy the packet mark (nfmark) to the connection mark (ctmark) using the given +masks. The new nfmark value is determined as follows: +.IP +ctmark = (ctmark & ~ctmask) ^ (nfmark & nfmask) +.IP +i.e. \fIctmask\fP defines what bits to clear and \fInfmask\fP what bits of the +nfmark to XOR into the ctmark. \fIctmask\fP and \fInfmask\fP default to +0xFFFFFFFF. +.TP +\fB\-\-restore\-mark\fP [\fB\-\-nfmask\fP \fInfmask\fP] [\fB\-\-ctmask\fP \fIctmask\fP] +Copy the connection mark (ctmark) to the packet mark (nfmark) using the given +masks. The new ctmark value is determined as follows: +.IP +nfmark = (nfmark & ~\fInfmask\fP) ^ (ctmark & \fIctmask\fP); +.IP +i.e. \fInfmask\fP defines what bits to clear and \fIctmask\fP what bits of the +ctmark to XOR into the nfmark. \fIctmask\fP and \fInfmask\fP default to +0xFFFFFFFF. +.IP +\fB\-\-restore\-mark\fP is only valid in the \fBmangle\fP table. +.PP +The following mnemonics are available for \fB\-\-set\-xmark\fP: +.TP +\fB\-\-and\-mark\fP \fIbits\fP +Binary AND the ctmark with \fIbits\fP. (Mnemonic for \fB\-\-set\-xmark +0/\fP\fIinvbits\fP, where \fIinvbits\fP is the binary negation of \fIbits\fP.) +.TP +\fB\-\-or\-mark\fP \fIbits\fP +Binary OR the ctmark with \fIbits\fP. (Mnemonic for \fB\-\-set\-xmark\fP +\fIbits\fP\fB/\fP\fIbits\fP.) +.TP +\fB\-\-xor\-mark\fP \fIbits\fP +Binary XOR the ctmark with \fIbits\fP. (Mnemonic for \fB\-\-set\-xmark\fP +\fIbits\fP\fB/0\fP.) +.TP +\fB\-\-set\-mark\fP \fIvalue\fP[\fB/\fP\fImask\fP] +Set the connection mark. If a mask is specified then only those bits set in the +mask are modified. +.TP +\fB\-\-save\-mark\fP [\fB\-\-mask\fP \fImask\fP] +Copy the nfmark to the ctmark. If a mask is specified, only those bits are +copied. +.TP +\fB\-\-restore\-mark\fP [\fB\-\-mask\fP \fImask\fP] +Copy the ctmark to the nfmark. If a mask is specified, only those bits are +copied. This is only valid in the \fBmangle\fP table. diff --git a/extensions/libxt_CONNSECMARK.c b/extensions/libxt_CONNSECMARK.c new file mode 100644 index 0000000..0b3cd79 --- /dev/null +++ b/extensions/libxt_CONNSECMARK.c @@ -0,0 +1,112 @@ +/* + * Shared library add-on to iptables to add CONNSECMARK target support. + * + * Based on the MARK and CONNMARK targets. + * + * Copyright (C) 2006 Red Hat, Inc., James Morris + */ +#include +#include +#include + +#define PFX "CONNSECMARK target: " + +enum { + O_SAVE = 0, + O_RESTORE, + F_SAVE = 1 << O_SAVE, + F_RESTORE = 1 << O_RESTORE, +}; + +static void CONNSECMARK_help(void) +{ + printf( +"CONNSECMARK target options:\n" +" --save Copy security mark from packet to conntrack\n" +" --restore Copy security mark from connection to packet\n"); +} + +static const struct xt_option_entry CONNSECMARK_opts[] = { + {.name = "save", .id = O_SAVE, .excl = F_RESTORE, .type = XTTYPE_NONE}, + {.name = "restore", .id = O_RESTORE, .excl = F_SAVE, + .type = XTTYPE_NONE}, + XTOPT_TABLEEND, +}; + +static void CONNSECMARK_parse(struct xt_option_call *cb) +{ + struct xt_connsecmark_target_info *info = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_SAVE: + info->mode = CONNSECMARK_SAVE; + break; + case O_RESTORE: + info->mode = CONNSECMARK_RESTORE; + break; + } +} + +static void CONNSECMARK_check(struct xt_fcheck_call *cb) +{ + if (cb->xflags == 0) + xtables_error(PARAMETER_PROBLEM, PFX "parameter required"); +} + +static void print_connsecmark(const struct xt_connsecmark_target_info *info) +{ + switch (info->mode) { + case CONNSECMARK_SAVE: + printf("save"); + break; + + case CONNSECMARK_RESTORE: + printf("restore"); + break; + + default: + xtables_error(OTHER_PROBLEM, PFX "invalid mode %hhu\n", info->mode); + } +} + +static void +CONNSECMARK_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct xt_connsecmark_target_info *info = + (struct xt_connsecmark_target_info*)(target)->data; + + printf(" CONNSECMARK "); + print_connsecmark(info); +} + +static void +CONNSECMARK_save(const void *ip, const struct xt_entry_target *target) +{ + const struct xt_connsecmark_target_info *info = + (struct xt_connsecmark_target_info*)target->data; + + printf(" --"); + print_connsecmark(info); +} + +static struct xtables_target connsecmark_target = { + .family = NFPROTO_UNSPEC, + .name = "CONNSECMARK", + .version = XTABLES_VERSION, + .revision = 0, + .size = XT_ALIGN(sizeof(struct xt_connsecmark_target_info)), + .userspacesize = XT_ALIGN(sizeof(struct xt_connsecmark_target_info)), + .help = CONNSECMARK_help, + .print = CONNSECMARK_print, + .save = CONNSECMARK_save, + .x6_parse = CONNSECMARK_parse, + .x6_fcheck = CONNSECMARK_check, + .x6_options = CONNSECMARK_opts, +}; + +void _init(void) +{ + xtables_register_target(&connsecmark_target); +} diff --git a/extensions/libxt_CONNSECMARK.man b/extensions/libxt_CONNSECMARK.man new file mode 100644 index 0000000..2616ab9 --- /dev/null +++ b/extensions/libxt_CONNSECMARK.man @@ -0,0 +1,18 @@ +This module copies security markings from packets to connections +(if unlabeled), and from connections back to packets (also only +if unlabeled). Typically used in conjunction with SECMARK, it is +valid in the +.B security +table (for backwards compatibility with older kernels, it is also +valid in the +.B mangle +table). +.TP +\fB\-\-save\fP +If the packet has a security marking, copy it to the connection +if the connection is not marked. +.TP +\fB\-\-restore\fP +If the packet does not have a security marking, and the connection +does, copy the security marking from the connection to the packet. + diff --git a/extensions/libxt_CT.c b/extensions/libxt_CT.c new file mode 100644 index 0000000..27a20e2 --- /dev/null +++ b/extensions/libxt_CT.c @@ -0,0 +1,282 @@ +#include +#include +#include +#include +#include + +static void ct_help(void) +{ + printf( +"CT target options:\n" +" --notrack Don't track connection\n" +" --helper name Use conntrack helper 'name' for connection\n" +" --ctevents event[,event...] Generate specified conntrack events for connection\n" +" --expevents event[,event...] Generate specified expectation events for connection\n" +" --zone ID Assign/Lookup connection in zone ID\n" + ); +} + +static void ct_help_v1(void) +{ + printf( +"CT target options:\n" +" --notrack Don't track connection\n" +" --helper name Use conntrack helper 'name' for connection\n" +" --timeout name Use timeout policy 'name' for connection\n" +" --ctevents event[,event...] Generate specified conntrack events for connection\n" +" --expevents event[,event...] Generate specified expectation events for connection\n" +" --zone ID Assign/Lookup connection in zone ID\n" + ); +} + +enum { + O_NOTRACK = 0, + O_HELPER, + O_TIMEOUT, + O_CTEVENTS, + O_EXPEVENTS, + O_ZONE, +}; + +#define s struct xt_ct_target_info +static const struct xt_option_entry ct_opts[] = { + {.name = "notrack", .id = O_NOTRACK, .type = XTTYPE_NONE}, + {.name = "helper", .id = O_HELPER, .type = XTTYPE_STRING, + .flags = XTOPT_PUT, XTOPT_POINTER(s, helper)}, + {.name = "ctevents", .id = O_CTEVENTS, .type = XTTYPE_STRING}, + {.name = "expevents", .id = O_EXPEVENTS, .type = XTTYPE_STRING}, + {.name = "zone", .id = O_ZONE, .type = XTTYPE_UINT16, + .flags = XTOPT_PUT, XTOPT_POINTER(s, zone)}, + XTOPT_TABLEEND, +}; +#undef s + +#define s struct xt_ct_target_info_v1 +static const struct xt_option_entry ct_opts_v1[] = { + {.name = "notrack", .id = O_NOTRACK, .type = XTTYPE_NONE}, + {.name = "helper", .id = O_HELPER, .type = XTTYPE_STRING, + .flags = XTOPT_PUT, XTOPT_POINTER(s, helper)}, + {.name = "timeout", .id = O_TIMEOUT, .type = XTTYPE_STRING, + .flags = XTOPT_PUT, XTOPT_POINTER(s, timeout)}, + {.name = "ctevents", .id = O_CTEVENTS, .type = XTTYPE_STRING}, + {.name = "expevents", .id = O_EXPEVENTS, .type = XTTYPE_STRING}, + {.name = "zone", .id = O_ZONE, .type = XTTYPE_UINT16, + .flags = XTOPT_PUT, XTOPT_POINTER(s, zone)}, + XTOPT_TABLEEND, +}; +#undef s + +struct event_tbl { + const char *name; + unsigned int event; +}; + +static const struct event_tbl ct_event_tbl[] = { + { "new", IPCT_NEW }, + { "related", IPCT_RELATED }, + { "destroy", IPCT_DESTROY }, + { "reply", IPCT_REPLY }, + { "assured", IPCT_ASSURED }, + { "protoinfo", IPCT_PROTOINFO }, + { "helper", IPCT_HELPER }, + { "mark", IPCT_MARK }, + { "natseqinfo", IPCT_NATSEQADJ }, + { "secmark", IPCT_SECMARK }, +}; + +static const struct event_tbl exp_event_tbl[] = { + { "new", IPEXP_NEW }, +}; + +static uint32_t ct_parse_events(const struct event_tbl *tbl, unsigned int size, + const char *events) +{ + char str[strlen(events) + 1], *e = str, *t; + unsigned int mask = 0, i; + + strcpy(str, events); + while ((t = strsep(&e, ","))) { + for (i = 0; i < size; i++) { + if (strcmp(t, tbl[i].name)) + continue; + mask |= 1 << tbl[i].event; + break; + } + + if (i == size) + xtables_error(PARAMETER_PROBLEM, "Unknown event type \"%s\"", t); + } + + return mask; +} + +static void ct_print_events(const char *pfx, const struct event_tbl *tbl, + unsigned int size, uint32_t mask) +{ + const char *sep = ""; + unsigned int i; + + printf(" %s ", pfx); + for (i = 0; i < size; i++) { + if (mask & (1 << tbl[i].event)) { + printf("%s%s", sep, tbl[i].name); + sep = ","; + } + } +} + +static void ct_parse(struct xt_option_call *cb) +{ + struct xt_ct_target_info *info = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_NOTRACK: + info->flags |= XT_CT_NOTRACK; + break; + case O_CTEVENTS: + info->ct_events = ct_parse_events(ct_event_tbl, ARRAY_SIZE(ct_event_tbl), cb->arg); + break; + case O_EXPEVENTS: + info->exp_events = ct_parse_events(exp_event_tbl, ARRAY_SIZE(exp_event_tbl), cb->arg); + break; + } +} + +static void ct_parse_v1(struct xt_option_call *cb) +{ + struct xt_ct_target_info_v1 *info = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_NOTRACK: + info->flags |= XT_CT_NOTRACK; + break; + case O_CTEVENTS: + info->ct_events = ct_parse_events(ct_event_tbl, + ARRAY_SIZE(ct_event_tbl), + cb->arg); + break; + case O_EXPEVENTS: + info->exp_events = ct_parse_events(exp_event_tbl, + ARRAY_SIZE(exp_event_tbl), + cb->arg); + break; + } +} + +static void ct_print(const void *ip, const struct xt_entry_target *target, int numeric) +{ + const struct xt_ct_target_info *info = + (const struct xt_ct_target_info *)target->data; + + printf(" CT"); + if (info->flags & XT_CT_NOTRACK) + printf(" notrack"); + if (info->helper[0]) + printf(" helper %s", info->helper); + if (info->ct_events) + ct_print_events("ctevents", ct_event_tbl, + ARRAY_SIZE(ct_event_tbl), info->ct_events); + if (info->exp_events) + ct_print_events("expevents", exp_event_tbl, + ARRAY_SIZE(exp_event_tbl), info->exp_events); + if (info->zone) + printf("zone %u ", info->zone); +} + +static void +ct_print_v1(const void *ip, const struct xt_entry_target *target, int numeric) +{ + const struct xt_ct_target_info_v1 *info = + (const struct xt_ct_target_info_v1 *)target->data; + + printf(" CT"); + if (info->flags & XT_CT_NOTRACK) + printf(" notrack"); + if (info->helper[0]) + printf(" helper %s", info->helper); + if (info->timeout[0]) + printf(" timeout %s", info->timeout); + if (info->ct_events) + ct_print_events("ctevents", ct_event_tbl, + ARRAY_SIZE(ct_event_tbl), info->ct_events); + if (info->exp_events) + ct_print_events("expevents", exp_event_tbl, + ARRAY_SIZE(exp_event_tbl), info->exp_events); + if (info->zone) + printf("zone %u ", info->zone); +} + +static void ct_save(const void *ip, const struct xt_entry_target *target) +{ + const struct xt_ct_target_info *info = + (const struct xt_ct_target_info *)target->data; + + if (info->flags & XT_CT_NOTRACK) + printf(" --notrack"); + if (info->helper[0]) + printf(" --helper %s", info->helper); + if (info->ct_events) + ct_print_events("--ctevents", ct_event_tbl, + ARRAY_SIZE(ct_event_tbl), info->ct_events); + if (info->exp_events) + ct_print_events("--expevents", exp_event_tbl, + ARRAY_SIZE(exp_event_tbl), info->exp_events); + if (info->zone) + printf(" --zone %u", info->zone); +} + +static void ct_save_v1(const void *ip, const struct xt_entry_target *target) +{ + const struct xt_ct_target_info_v1 *info = + (const struct xt_ct_target_info_v1 *)target->data; + + if (info->flags & XT_CT_NOTRACK) + printf(" --notrack"); + if (info->helper[0]) + printf(" --helper %s", info->helper); + if (info->timeout[0]) + printf(" --timeout %s", info->timeout); + if (info->ct_events) + ct_print_events("--ctevents", ct_event_tbl, + ARRAY_SIZE(ct_event_tbl), info->ct_events); + if (info->exp_events) + ct_print_events("--expevents", exp_event_tbl, + ARRAY_SIZE(exp_event_tbl), info->exp_events); + if (info->zone) + printf(" --zone %u", info->zone); +} + +static struct xtables_target ct_target_reg[] = { + { + .family = NFPROTO_UNSPEC, + .name = "CT", + .version = XTABLES_VERSION, + .size = XT_ALIGN(sizeof(struct xt_ct_target_info)), + .userspacesize = offsetof(struct xt_ct_target_info, ct), + .help = ct_help, + .print = ct_print, + .save = ct_save, + .x6_parse = ct_parse, + .x6_options = ct_opts, + }, + { + .family = NFPROTO_UNSPEC, + .name = "CT", + .revision = 1, + .version = XTABLES_VERSION, + .size = XT_ALIGN(sizeof(struct xt_ct_target_info_v1)), + .userspacesize = offsetof(struct xt_ct_target_info_v1, ct), + .help = ct_help_v1, + .print = ct_print_v1, + .save = ct_save_v1, + .x6_parse = ct_parse_v1, + .x6_options = ct_opts_v1, + }, +}; + +void _init(void) +{ + xtables_register_targets(ct_target_reg, ARRAY_SIZE(ct_target_reg)); +} diff --git a/extensions/libxt_CT.man b/extensions/libxt_CT.man new file mode 100644 index 0000000..a93eb14 --- /dev/null +++ b/extensions/libxt_CT.man @@ -0,0 +1,30 @@ +The CT target allows to set parameters for a packet or its associated +connection. The target attaches a "template" connection tracking entry to +the packet, which is then used by the conntrack core when initializing +a new ct entry. This target is thus only valid in the "raw" table. +.TP +\fB\-\-notrack\fP +Disables connection tracking for this packet. +.TP +\fB\-\-helper\fP \fIname\fP +Use the helper identified by \fIname\fP for the connection. This is more +flexible than loading the conntrack helper modules with preset ports. +.TP +\fB\-\-ctevents\fP \fIevent\fP[\fB,\fP...] +Only generate the specified conntrack events for this connection. Possible +event types are: \fBnew\fP, \fBrelated\fP, \fBdestroy\fP, \fBreply\fP, +\fBassured\fP, \fBprotoinfo\fP, \fBhelper\fP, \fBmark\fP (this refers to +the ctmark, not nfmark), \fBnatseqinfo\fP, \fBsecmark\fP (ctsecmark). +.TP +\fB\-\-expevents\fP \fIevent\fP[\fB,\fP...] +Only generate the specified expectation events for this connection. +Possible event types are: \fBnew\fP. +.TP +\fB\-\-zone\fP \fIid\fP +Assign this packet to zone \fIid\fP and only have lookups done in that zone. +By default, packets have zone 0. +.TP +\fB\-\-timeout\fP \fIname\fP +Use the timeout policy identified by \fIname\fP for the connection. This is +provides more flexible timeout policy definition than global timeout values +available at /proc/sys/net/netfilter/nf_conntrack_*_timeout_*. diff --git a/extensions/libxt_DSCP.c b/extensions/libxt_DSCP.c new file mode 100644 index 0000000..e16e93c --- /dev/null +++ b/extensions/libxt_DSCP.c @@ -0,0 +1,112 @@ +/* Shared library add-on to iptables for DSCP + * + * (C) 2000- 2002 by Matthew G. Marsh , + * Harald Welte + * + * This program is distributed under the terms of GNU GPL v2, 1991 + * + * libipt_DSCP.c borrowed heavily from libipt_TOS.c + * + * --set-class added by Iain Barnes + */ +#include +#include +#include +#include + +/* This is evil, but it's my code - HW*/ +#include "dscp_helper.c" + +enum { + O_SET_DSCP = 0, + O_SET_DSCP_CLASS, + F_SET_DSCP = 1 << O_SET_DSCP, + F_SET_DSCP_CLASS = 1 << O_SET_DSCP_CLASS, +}; + +static void DSCP_help(void) +{ + printf( +"DSCP target options\n" +" --set-dscp value Set DSCP field in packet header to value\n" +" This value can be in decimal (ex: 32)\n" +" or in hex (ex: 0x20)\n" +" --set-dscp-class class Set the DSCP field in packet header to the\n" +" value represented by the DiffServ class value.\n" +" This class may be EF,BE or any of the CSxx\n" +" or AFxx classes.\n" +"\n" +" These two options are mutually exclusive !\n" +); +} + +static const struct xt_option_entry DSCP_opts[] = { + {.name = "set-dscp", .id = O_SET_DSCP, .excl = F_SET_DSCP_CLASS, + .type = XTTYPE_UINT8, .min = 0, .max = XT_DSCP_MAX, + .flags = XTOPT_PUT, + XTOPT_POINTER(struct xt_DSCP_info, dscp)}, + {.name = "set-dscp-class", .id = O_SET_DSCP_CLASS, .excl = F_SET_DSCP, + .type = XTTYPE_STRING}, + XTOPT_TABLEEND, +}; + +static void DSCP_parse(struct xt_option_call *cb) +{ + struct xt_DSCP_info *dinfo = cb->data; + + xtables_option_parse(cb); + switch (cb->entry->id) { + case O_SET_DSCP_CLASS: + dinfo->dscp = class_to_dscp(cb->arg); + break; + } +} + +static void DSCP_check(struct xt_fcheck_call *cb) +{ + if (cb->xflags == 0) + xtables_error(PARAMETER_PROBLEM, + "DSCP target: Parameter --set-dscp is required"); +} + +static void +print_dscp(uint8_t dscp, int numeric) +{ + printf(" 0x%02x", dscp); +} + +static void DSCP_print(const void *ip, const struct xt_entry_target *target, + int numeric) +{ + const struct xt_DSCP_info *dinfo = + (const struct xt_DSCP_info *)target->data; + printf(" DSCP set"); + print_dscp(dinfo->dscp, numeric); +} + +static void DSCP_save(const void *ip, const struct xt_entry_target *target) +{ + const struct xt_DSCP_info *dinfo = + (const struct xt_DSCP_info *)target->data; + + printf(" --set-dscp 0x%02x", dinfo->dscp); +} + +static struct xtables_target dscp_target = { + .family = NFPROTO_UNSPEC, + .name = "DSCP", + .version = XTABLES_VERSION, + .size = XT_ALIGN(sizeof(struct xt_DSCP_info)), + .userspacesize = XT_ALIGN(sizeof(struct xt_DSCP_info)), + .help = DSCP_help, + .print = DSCP_print, + .save = DSCP_save, + .x6_parse = DSCP_parse, + .x6_fcheck = DSCP_check, + .x6_options = DSCP_opts, +}; + +void _init(void) +{ + xtables_register_target(&dscp_target); +} diff --git a/extensions/libxt_DSCP.man b/extensions/libxt_DSCP.man new file mode 100644 index 0000000..551ba2e --- /dev/null +++ b/extensions/libxt_DSCP.man @@ -0,0 +1,9 @@ +This target allows to alter the value of the DSCP bits within the TOS +header of the IPv4 packet. As this manipulates a packet, it can only +be used in the mangle table. +.TP +\fB\-\-set\-dscp\fP \fIvalue\fP +Set the DSCP field to a numerical value (can be decimal or hex) +.TP +\fB\-\-set\-dscp\-class\fP \fIclass\fP +Set the DSCP field to a DiffServ class. diff --git a/extensions/libxt_IDLETIMER.c b/extensions/libxt_IDLETIMER.c new file mode 100644 index 0000000..21004a4 --- /dev/null +++ b/extensions/libxt_IDLETIMER.c @@ -0,0 +1,89 @@ +/* + * Shared library add-on for iptables to add IDLETIMER support. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Luciano Coelho + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ +#include +#include +#include + +enum { + O_TIMEOUT = 0, + O_LABEL, +}; + +#define s struct idletimer_tg_info +static const struct xt_option_entry idletimer_tg_opts[] = { + {.name = "timeout", .id = O_TIMEOUT, .type = XTTYPE_UINT32, + .flags = XTOPT_MAND | XTOPT_PUT, XTOPT_POINTER(s, timeout)}, + {.name = "label", .id = O_LABEL, .type = XTTYPE_STRING, + .flags = XTOPT_MAND | XTOPT_PUT, XTOPT_POINTER(s, label)}, + XTOPT_TABLEEND, +}; +#undef s + +static void idletimer_tg_help(void) +{ + printf( +"IDLETIMER target options:\n" +" --timeout time Timeout until the notification is sent (in seconds)\n" +" --label string Unique rule identifier\n" +"\n"); +} + +static void idletimer_tg_print(const void *ip, + const struct xt_entry_target *target, + int numeric) +{ + struct idletimer_tg_info *info = + (struct idletimer_tg_info *) target->data; + + printf(" timeout:%u", info->timeout); + printf(" label:%s", info->label); +} + +static void idletimer_tg_save(const void *ip, + const struct xt_entry_target *target) +{ + struct idletimer_tg_info *info = + (struct idletimer_tg_info *) target->data; + + printf(" --timeout %u", info->timeout); + printf(" --label %s", info->label); +} + +static struct xtables_target idletimer_tg_reg = { + .family = NFPROTO_UNSPEC, + .name = "IDLETIMER", + .version = XTABLES_VERSION, + .revision = 0, + .size = XT_ALIGN(sizeof(struct idletimer_tg_info)), + .userspacesize = offsetof(struct idletimer_tg_info, timer), + .help = idletimer_tg_help, + .x6_parse = xtables_option_parse, + .print = idletimer_tg_print, + .save = idletimer_tg_save, + .x6_options = idletimer_tg_opts, +}; + +void _init(void) +{ + xtables_register_target(&idletimer_tg_reg); +} diff --git a/extensions/libxt_IDLETIMER.man b/extensions/libxt_IDLETIMER.man new file mode 100644 index 0000000..e3c91ce --- /dev/null +++ b/extensions/libxt_IDLETIMER.man @@ -0,0 +1,20 @@ +This target can be used to identify when interfaces have been idle for a +certain period of time. Timers are identified by labels and are created when +a rule is set with a new label. The rules also take a timeout value (in +seconds) as an option. If more than one rule uses the same timer label, the +timer will be restarted whenever any of the rules get a hit. One entry for +each timer is created in sysfs. This attribute contains the timer remaining +for the timer to expire. The attributes are located under the xt_idletimer +class: +.PP +/sys/class/xt_idletimer/timers/