== Quick guide: build and run IoTivity projects on Ubuntu ==
1. Build
- Go to the top directory of 'iotivity' project(Note: should always run 'scons'
-command in this directory)
+ Go to the top directory of 'iotivity' project(Note: should always run 'scons'
+ command in this directory)
+
+ Install build tools:
+ $ sudo apt-get install git-core scons ssh build-essential g++ doxygen valgrind
Install external libraries:
- $ sudo apt-get install libboost-dev libboost-program-options-dev libexpat1-dev libboost-thread-dev uuid-dev
+ $ sudo apt-get install libboost-dev libboost-program-options-dev libboost-thread-dev uuid-dev libssl-dev libtool libglib2.0-dev
Build release binaries:
$ scons
-(Note: C++ sdk requires cereal. Please follow the instruction in the build
-message to install cereal)
+(Note: C sdk requires tinycbor. Please follow the instruction in the build
+message to install tinycbor)
Build debug binaries:
$scons RELEASE=false
Arduino:
To build for Arduino, Arduino IDE is required.
Arduino IDE: http://arduino.cc/en/Main/Software
- (Note: recommend install Arduino IDE >=1.5.7)
+ (Note: recommend install Arduino IDE >=1.5.8)
Arduino builds are dependent on latest Time library. Download it from here:
http://www.pjrc.com/teensy/td_libs_Time.html
guide you to do that.)
Tizen:
-To build for tizen platform cereal library is needed.
-Please download cereal if it is not present in extlibs/cereal folder
-and apply the patch as following:
- $ git clone https://github.com/USCiLab/cereal.git extlibs/cereal/cereal
- $ cd extlibs/cereal/cereal
- $ git reset --hard 7121e91e6ab8c3e6a6516d9d9c3e6804e6f65245
- $ git apply ../../../resource/patches/cereal_gcc46.patch
+To build for tizen platform tinycbor library is needed.
+Please download tinycbor if it is not present in extlibs/tinycbor folder
+by doing the following:
+ $ git clone https://github.com/01org/tinycbor.git extlibs/tinycbor/tinycbor
* 3. External libraries
-IoTivity project depends on some external libraries, such as boost, expat ...
+IoTivity project depends on some external libraries, such as boost ...
During building, the existence of external library will be checked, if it doesn't
exist, the build script will try to download, unpack and build the library or
notify user to install it.
to skip it.
-=== Build IoTivity project on Linux(Ubuntu) ===
+=== Build IoTivity project ===
-1. Build IoTivity project for Linux
- $ cd <top directory of the project>
- $ sudo apt-get install libboost-dev libexpat1-dev libboost-thread-dev
- $ scons
+Linux:
+ * Possible values for <TARGET_TRANSPORT> are: ALL, IP, BLE
-2. Build IoTivity project for Android
- $ cd <top directory of the project>
- $ scons TARGET_OS=android TARGET_ARCH=xxx
-(xxx can be x86, armeabi, armeabi-v7a, armeabi-v7a-hard. To see all of its
-allowed value, please execute command 'scons TARGET_OS=android -Q -h')
-
-3. Build IoTivity project for Arduino
- $ cd <top directory of the project>
- $ scons TARGET_OS=arduino TARGET_ARCH=xxx BOARD=yyy
-(xxx can be avr, arm; yyy is the name of the board, to get its allowed value
-run: scons TARGET_OS=arduino TARGET_ARCH=xxx -h. You may see a option 'CPU' in
-the output of above command line, that's due to some boards have different
-processors, to specify the processor, add 'CPU=zzz' in the command line. If no
-'CPU' option exists, that means the board only support one kind of processor,
-it's unnecessary to specify it)
-
-4. Build Iotivity project for Tizen
- $ cd <top directory of the project>
- $ sh gbsbuild.sh
-(we provide the spec file required by gbs tool at toools/tizen directory.
-gbs is default build tool for Tizen platfrom, we can refer the following
-wiki to setup Tizen development environment:
-https://source.tizen.org/documentation/developer-guide/getting-started-guide)
+1. Go to root directory
+ $ cd <top directory of the project>
+ $ sudo apt-get install libboost-dev libboost-thread-dev libssl-dev libtool
-=== Build IoTivity project on Android ===
+2. Execute following command(s) to start build based on transport selection required
-1. Build IoTivity project for Android(It's the same as on Ubuntu)
- $ cd <top directory of the project>
- $ scons TARGET_OS=android TARGET_ARCH=xxx
-(xxx can be x86, armeabi, armeabi-v7a, armeabi-v7a-hard ...)
+ -> Building for all transports :
+ $ scons TARGET_OS=linux TARGET_TRANSPORT=ALL
-2. Build IoTivity project for Arduino(It's the same as on Ubuntu)
- $ cd <top directory of the project>
- $ scons TARGET_OS=arduino TARGET_ARCH=xxx BOARD=yyy
-(xxx can be avr, arm; yyy is the name of the board, to get its allowed value
-run: scons TARGET_OS=arduino TARGET_ARCH=xxx -h. You may see a option 'CPU' in
-the output of above command line, that's due to some boards have different
-processor, to specify the processor, add 'CPU=zzz' in the command line. If no
-'CPU' option exists, that means the board only support one kind of processor,
-it's unnecessary to specify it)
+ -> Building for a specific transport :
+ $ scons TARGET_OS=linux TARGET_TRANSPORT=IP
+
+ -> Building for multiple transports :
+ $ scons TARGET_OS=linux TARGET_TRANSPORT=IP,BLE TARGET_ARCH=xxx
+
+ -> Clean Build (all transports) :
+ $ scons TARGET_OS=linux TARGET_TRANSPORT=ALL -c (for clean)
+
+Android:
+ * Possible values for <TARGET_TRANSPORT> are: ALL, IP, BT, BLE
+ * Possible values for <TARGET_ARCH> are: x86, armeabi, armeabi-v7a, armeabi-v7a-hard
+ (To see all of its allowed value, please execute command 'scons TARGET_OS=android -Q -h')
+
+1. Go to root directory
+ $ cd <top directory of the project>
+
+2. Execute following command(s) to start build based on transport selection required
+
+ -> Building for all transports :
+ $ scons TARGET_OS=android TARGET_TRANSPORT=ALL TARGET_ARCH=xxx
+
+ -> Building for a specific transport :
+ $ scons TARGET_OS=android TARGET_TRANSPORT=IP TARGET_ARCH=xxx
+
+ -> Building for multiple transports :
+ $ scons TARGET_OS=android TARGET_TRANSPORT=IP,BT,BLE TARGET_ARCH=xxx
+
+ -> Clean Build (all transports) :
+ $ scons TARGET_OS=android TARGET_TRANSPORT=ALL -c (for clean)
+
+Tizen:
+ * Possible values for <TARGET_TRANSPORT> are: ALL, IP, BT, BLE
+ 1. Go to root directory
+ $ cd <top directory of the project>
-Note: Currently most IoTivity project doesn't support Windows, so you can't set
+ 2. Execute following command(s) to start build based on transport selection required
+
+ -> Building for all transports :
+ $ scons TARGET_OS=tizen TARGET_TRANSPORT=ALL
+
+ -> Building for a specific transport :
+ $ scons TARGET_OS=tizen TARGET_TRANSPORT=IP
+
+ -> Building for multiple transports :
+ $ scons TARGET_OS=tizen TARGET_TRANSPORT=IP,BT,BLE TARGET_ARCH=xxx
+
+ -> Clean Build (all transports) :
+ $ scons TARGET_OS=tizen TARGET_TRANSPORT=ALL -c (for clean)
+
+(we provide the spec file required by gbs tool at toools/tizen directory.
+gbs is default build tool for Tizen platform, we can refer the following
+wiki to setup Tizen development environment:
+https://source.tizen.org/documentation/developer-guide/getting-started-guide)
+
+Arduino:
+ * Possible values for <TARGET_TRANSPORT> are: IP, BLE
+ * Possible values for <TARGET_ARCH> are: arv, arm
+ (arv: arduino due, arm: arduino mega)
+ * Possible values for <BOARD> are: arduino_due_x_dbg, arduino_due_x, mega
+ * Possible values for <SHIELD> are: ETH, WIFI
+ (It is required in the case of the arduino due.)
+
+ 1. Go to root directory
+ $ cd <top directory of the project>
+ $ sudo apt-get install dos2unix
+
+ 2. Execute following command(s) to start build based on transport selection required
+
+ -> Building for a specific transport :
+ $ scons TARGET_OS=arduino TARGET_ARCH=xxx BOARD=yyy SHIELD=zzz
+
+(To get allowed values run: scons TARGET_OS=arduino TARGET_ARCH=xxx SHIELD=zzz -h.
+You may see a option 'CPU' in the output of above command line, that's due to
+some boards have different processors, to specify the processor, add 'CPU=zzz'
+in the command line. If no 'CPU' option exists, that means the board only
+support one kind of processor, it's unnecessary to specify it)
+
+Mac OSX:
+ * Possible values for <SYS_VERSION> are: OSX version, e.g. 10.9
+
+ 1. Go to root directory
+ $ cd <top directory of the project>
+
+ 2. Execute following command(s) to start build based on transport selection required
+
+ -> Building for a specific transport :
+ $ scons SYS_VERSION=yyy
+
+IOS:
+ * Possible values for <TARGET_ARCH> are: i386, x86_64, armv7, armv7s, arm64
+ * Possible values for <SYS_VERSION> are: IOS version, e.g. 7.0
+
+ 1. Go to root directory
+ $ cd <top directory of the project>
+
+ 2. Execute following command(s) to start build based on transport selection required
+
+ -> Building for a specific transport :
+ $ scons TARGET_OS=ios TARGET_ARCH=xxx SYS_VERSION=yyy
+
+* Additional options
+ * VERBOSE=true or false (Show compilation)
+ * RELEASE=true or false (Build for release?)
+ * LOGGING=true or false (Enable stack logging)
+ * SECURED=1 or 0 (Build with DTLS)
+ * TEST=1 or 0 (Run unit tests)
+ * SECURED=1 or 0 (Build with DTLS)
+ * BUILD_SAMPLE=ON or OFF (Build with sample)
+ * ROUTING=GW or EP (Enable routing)
+ * WITH_TCP=true or false (Enable CoAP over TCP Transport, arduino is not supported)
+ * WITH_RA=true or false (Build with Remote Access module)
+ * WITH_RD=1 or 0 (Build including Resource Directory)
+ * SIMULATOR=true or false (Build with simulator module)
+ * Possible values for <WITH_MQ> are: PUB,SUB,BROKER (Build including Message Queue)
+ -> PUB : publisher, SUB : subscriber, BROKER : MQ broker(not supported yet)
+
+Note1: Currently most IoTivity project doesn't support Windows, so you can't set
TARGET_OS to 'windows' except the project support Windows.
That's to say if the project doesn't support Windows, run:
$ scons
may always fail.
-
-=== Build IoTivity project on Mac OSX ===
-
-1. Build IoTivity project for Mac OSX
- $ cd <top directory of the project>
- $ scons SYS_VERSION=yyy
-(yyy is the OSX version, e.g. 10.9)
-
-2. Build IoTivity project for Android(It's the same as on Ubuntu)
- $ cd <top directory of the project>
- $ scons TARGET_OS=android TARGET_ARCH=xxx
-(xxx can be x86, armeabi, armeabi-v7a, armeabi-v7a-hard)
-
-3. Build IoTivity project for IOS
- $ cd <top directory of the project>
- $ scons TARGET_OS=ios TARGET_ARCH=xxx SYS_VERSION=yyy
-(xxx can be i386, x86_64, armv7, armv7s, arm64, yyy is IOS version, e.g. 7.0)
-
-Note:
+Note2:
1) for convenience, a script (auto_build.sh) is provided to run possible build
at once. Following is the usage:
$ auto_build.sh <path-to-android-ndk>
To clean:
$ auto_build.sh -c
-
-2) For Arduino build, the Time library should >=1.3. The old can only be built
-with Arduino IDE 1.0.x
projects / platform / upstream / iotivity.git / blobdiff