-D-Bus 1.6.14 (UNRELEASED)
+D-Bus 1.7.6 (UNRELEASED)
==
+Build-time configuration changes:
+
+• Directory change notification via dnotify on Linux is no longer
+ supported; it hadn't compiled successfully since 2010 in any case.
+ If you don't have inotify (Linux) or kqueue (*BSD), you will need
+ to send SIGHUP to the dbus-daemon when its configuration changes.
+ (fd.o #33001, Chengwei Yang)
+
+• The DBUS_DISABLE_ASSERTS CMake option didn't actually disable most
+ assertions. It has been renamed to DBUS_DISABLE_ASSERT to be consistent
+ with the Autotools build system. (fd.o #66142, Chengwei Yang)
+
+Enhancements:
+
+• D-Bus Specification 0.22
+ · Document GetAdtAuditSessionData() and
+ GetConnectionSELinuxSecurityContext() (fd.o #54445, Simon)
+ · Fix example .service file (fd.o #66481, Chengwei Yang)
+
+• Be thread-safe by default on all platforms, even if
+ dbus_threads_init_default() has not been called. For compatibility with
+ older libdbus, library users should continue to call
+ dbus_threads_init_default(): it is harmless to do so.
+ (fd.o #54972, Simon McVittie)
+
+• Add GetConnectionCredentials() method (fd.o #54445, Simon)
+
+• New API: dbus_setenv(), a simple wrapper around setenv().
+ Note that this is not thread-safe. (fd.o #39196, Simon)
+
Fixes:
• Escape addresses containing non-ASCII characters correctly
(fd.o #53499, Chengwei Yang)
+• Don't crash on "dbus-send --session / x.y.z" which regressed in 1.7.4.
+ (fd.o #65923, Chengwei Yang)
+
• If malloc() returns NULL in _dbus_string_init() or similar, don't free
an invalid pointer if the string is later freed (fd.o #65959, Chengwei Yang)
• If malloc() returns NULL in dbus_set_error(), don't va_end() a va_list
that was never va_start()ed (fd.o #66300, Chengwei Yang)
-D-Bus 1.6.12 (2013-06-13)
+• fix build failure with --enable-stats (fd.o #66004, Chengwei Yang)
+
+• fix a regression test on platforms with strict alignment (fd.o #67279,
+ Colin Walters)
+
+• Avoid calling function parameters "interface" since certain Windows headers
+ have a namespace-polluting macro of that name (fd.o #66493, Ivan Romanov)
+
+• Assorted Doxygen fixes (fd.o #65755, Chengwei Yang)
+
+• Unix-specific:
+ · dbus-run-session: clear some unwanted environment variables
+ (fd.o #39196, Simon)
+ · dbus-run-session: compile on FreeBSD (fd.o #66197, Chengwei Yang)
+
+• Windows-specific:
+ · Remove unavailable command-line options from 'dbus-daemon --help'
+ (fd.o #42441, Ralf Habacker)
+ · Add support for looking up local TCPv4 clients' credentials on
+ Windows XP via the undocumented AllocateAndGetTcpExTableFromStack
+ function (fd.o #66060, Ralf Habacker)
+
+• Internal changes:
+ · add DBUS_ENABLE_ASSERT, DBUS_ENABLE_CHECKS for less confusing
+ conditionals (fd.o #66142, Chengwei Yang)
+ · improve verbose-mode output (fd.o #63047, Colin Walters)
+ · consolidate Autotools and CMake build (fd.o #64875, Ralf Habacker)
+ · fix various unused variables, unusual build configurations
+ etc. (fd.o #65712, #65990, #66005, #66257; Chengwei Yang)
+
+D-Bus 1.7.4 (2013-06-13)
==
-The “does this unit have a soul?” release.
+The “but is your thread-safety thread-safe?” release.
-Fixes:
+Security fixes:
• CVE-2013-2168: Fix misuse of va_list that could be used as a denial
of service for system services. Vulnerability reported by Alexandru Cornea.
(Simon)
+Dependencies:
+
+• The Windows version of libdbus now contains a C++ source file, used
+ to provide global initialization when the library is loaded.
+ gcc (mingw*) users should ensure that g++ is also installed.
+
+• The libxml2-based configuration reader (which hasn't worked for 2.5 years,
+ and was never the recommended option) has been removed. Expat is now a
+ hard dependency.
+
+Enhancements:
+
+• It should now be safe to call dbus_threads_init_default() from any thread,
+ at any time. Authors of loadable modules and plugins that use libdbus
+ should consider doing so during initialization.
+ (fd.o #54972, Simon McVittie)
+
+• Improve dbus-send documentation and command-line parsing (fd.o #65424,
+ Chengwei Yang)
+
+Unix-specific:
+ · dbus-run-session: experimental new tool to start a temporary D-Bus
+ session, e.g. for regression tests or a text console, replacing
+ certain uses of dbus-launch which weren't really correct
+ (fd.o #39196, Simon)
+
+Other fixes:
+
• In dbus-daemon, don't crash if a .service file starts with key=value
(fd.o #60853, Chengwei Yang)
• Unix-specific:
+ · Fix a crash similar to CVE-2013-2168 the first time we try to use syslog
+ on a platform not defining LOG_PERROR, such as Solaris or QNX.
+ This regressed in 1.7.0. (Simon)
· Fix an assertion failure if we try to activate systemd services before
systemd connects to the bus (fd.o #50199, Chengwei Yang)
· Avoid compiler warnings for ignoring the return from write()
(Chengwei Yang)
-D-Bus 1.6.10 (2013-04-24)
+• Windows-specific:
+ · Under cmake, install runtime libraries (DLLs) into bin/ instead of lib/
+ so that Windows finds them (fd.o #59733, Ralf Habacker)
+
+D-Bus 1.7.2 (2013-04-25)
==
-The “little-known facts about bananas” release.
+The “only partially opaque” release.
+
+Configuration changes:
+
+• On non-QNX Unix platforms, the default limit on fds per message in the
+ session bus configuration has reduced from 4096 to 1024. The default
+ limit used on the system bus was already 1024. On QNX, both limits are
+ reduced further, to 128.
+
+Enhancements:
-• Following Unicode Corrigendum #9, the noncharacters U+nFFFE, U+nFFFF,
- U+FDD0..U+FDEF are allowed in UTF-8 strings again.
- (fd.o #63072, Simon McVittie)
+• D-Bus Specification 0.21
+ · Following Unicode Corrigendum #9, the noncharacters U+nFFFE, U+nFFFF,
+ U+FDD0..U+FDEF are allowed in UTF-8 strings again. (fd.o #63072,
+ Simon McVittie)
+
+Fixes:
• Diagnose incorrect use of dbus_connection_get_data() with negative slot
(i.e. before allocating the slot) rather than returning junk
(fd.o #63127, Dan Williams)
+• Fix a cmake build regression since 1.7.0 (fd.o #63682; Ralf Habacker,
+ Simon McVittie)
+
+• Unix-specific:
+ · On Linux, link successfully with glibc 2.17 (fd.o #63166, Simon McVittie)
+ · Under systemd, log to syslog only, not stderr, avoiding duplication
+ (fd.o #61399, #39987; Colin Walters, Dagobert Michelsen)
+ · Under systemd, remove unnecessary dependency on syslog.socket
+ (fd.o #63531, Cristian Rodríguez)
+ · Include alloca.h for alloca() if available, fixing compilation on
+ Solaris 10 (fd.o #63071, Dagobert Michelsen)
+ · Allow use of systemd-logind without the rest of systemd
+ (fd.o #62585, Martin Pitt)
+ · When built with CMake, link to librt and use the right path for
+ meinproc's XSLT stylesheets (fd.o #61637, Ralf Habacker)
+ · Reduce the default limit on number of fds per message to 128 under
+ QNX, working around an arbitrary OS limit (fd.o #61176, Matt Fischer)
+
+• Windows-specific:
+ · Do not claim that all bus clients have the dbus-daemon's credentials;
+ pick up local TCPv4 clients' credentials (process ID and security
+ identifier, i.e. user) using GetExtendedTcpTable() (fd.o #61787,
+ Ralf Habacker)
+
+D-Bus 1.7.0 (2013-02-22)
+==
+
+The "Disingenuous Assertions" release.
+
+This is a new development release, starting the 1.7.x branch. D-Bus 1.6
+remains the recommended version for long-term-supported distributions
+or the upcoming GNOME 3.8 release.
+
+Build-time configuration changes:
+
+• The --with-dbus-session-bus-default-address configure option is no longer
+ supported. Use the new --with-dbus-session-bus-connect-address and
+ --with-dbus-session-bus-listen-address options instead. On Windows, you
+ usually want them to have the same argument; on Unix, the defaults are
+ usually correct.
+
+• Similarly, the DBUS_SESSION_BUS_DEFAULT_ADDRESS CMake variable is no longer
+ supported; use the new DBUS_SESSION_BUS_LISTEN_ADDRESS and
+ DBUS_SESSION_BUS_CONNECT_ADDRESS variables instead.
+
+• cmake/cross-compile.sh has been removed. Instead, please use a
+ cross-toolchain file (-DCMAKE_TOOLCHAIN_FILE) as documented at
+ <http://www.vtk.org/Wiki/CMake_Cross_Compiling>; or use Autotools
+ as documented in "info automake Cross-Compilation", and set
+ PKG_CONFIG_PATH appropriately.
+
+Requirements:
+
+• Man pages now require xmlto (or either xmlto or meinproc, if using CMake).
+• man2html is no longer used.
+
+Enhancements:
+
+• D-Bus Specification 0.20
+ · actually say that /org/freedesktop/DBus is the object that
+ implements o.fd.DBus (fd.o #51865, Colin Walters)
+ · various reorganisation for better clarity (fd.o #38252, Simon McVittie)
+ · stop claiming that all basic types work just like INT32 (strings don't!)
+
+• The "source code" for the man pages is now Docbook XML, eliminating
+ the outdated duplicate copies used when building with CMake.
+ (fd.o #59805; Ralf Habacker, Simon McVittie)
+
+Fixes:
+
• In the activation helper, when compiled for tests, do not reset the system
bus address, fixing the regression tests. (fd.o #52202, Simon)
• Fix building with Valgrind 3.8, at the cost of causing harmless warnings
with Valgrind 3.6 on some compilers (fd.o #55932, Arun Raghavan)
-• Don't leak temporary fds pointing to /dev/null (fd.o #56927, Michel HERMIER)
+• Merge <servicehelper> from system-local.conf if necessary (fd.o #51560,
+ Krzysztof Konopko)
-• Create session.d, system.d directories under CMake (fd.o #41319,
+• Under CMake, prefer xmlto over meinproc (fd.o #59733, Ralf Habacker)
+
+• Stop duplicating CMake's own logic to find libexpat
+ (fd.o #59733, Ralf Habacker)
+
+• Don't assume CMake host and build system are the same (fd.o #59733,
Ralf Habacker)
+• Avoid deprecation warnings for GLib 2.35 (fd.o #59971, Simon McVittie)
+
• Unix-specific:
- · Include alloca.h for alloca() if available, fixing compilation on
- Solaris 10 (fd.o #63071, Dagobert Michelsen)
+ · Check for functions in libpthread correctly, fixing compilation on
+ (at least) OpenBSD (fd.o #47239, Simon)
+ · Don't leak temporary fds pointing to /dev/null (fd.o #56927,
+ Michel HERMIER)
+ · Update sd-daemon.[ch] from systemd (fd.o #60681)
+ · Add partial support for QNX (fd.o #60339, fd.o #61176; Matt Fischer)
+
+• Windows-specific:
+ · The default session bus listening and connecting address is now
+ "autolaunch:", which makes D-Bus on Windows interoperate with itself
+ and GDBus "out of the box". Use the configure options and cmake variables
+ described above if you require a different autolaunch scope.
+ (fd.o #38201, Simon McVittie)
+ · Avoid a CMake warning under Cygwin (fd.o #59401, Ralf Habacker)
+
+• Create session.d, system.d directories under CMake (fd.o #41319,
+ Ralf Habacker)
D-Bus 1.6.8 (2012-09-28)
==
projects / platform / upstream / dbus.git / blobdiff