-# Generated automatically from Makefile.in by configure.
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+#***************************************************************************
+# _ _ ____ _
+# Project ___| | | | _ \| |
+# / __| | | | |_) | |
+# | (__| |_| | _ <| |___
+# \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1998 - 2017, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at https://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+###########################################################################
+
+all:
+ ./configure
+ make
+
+ssl:
+ ./configure --with-ssl
+ make
+
+borland:
+ cd lib
+ $(MAKE) -f Makefile.b32
+ cd ..\src
+ $(MAKE) -f Makefile.b32
+
+borland-ssl:
+ cd lib
+ $(MAKE) -f Makefile.b32 WITH_SSL=1
+ cd ..\src
+ $(MAKE) -f Makefile.b32 WITH_SSL=1
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
+borland-ssl-zlib:
+ cd lib
+ $(MAKE) -f Makefile.b32 WITH_SSL=1 WITH_ZLIB=1
+ cd ..\src
+ $(MAKE) -f Makefile.b32 WITH_SSL=1 WITH_ZLIB=1
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
+borland-clean:
+ cd lib
+ $(MAKE) -f Makefile.b32 clean
+ cd ..\src
+ $(MAKE) -f Makefile.b32 clean
-#
-# $Id$
-#
+watcom: .SYMBOLIC
+ cd lib && $(MAKE) -u -f Makefile.Watcom
+ cd src && $(MAKE) -u -f Makefile.Watcom
+
+watcom-clean: .SYMBOLIC
+ cd lib && $(MAKE) -u -f Makefile.Watcom clean
+ cd src && $(MAKE) -u -f Makefile.Watcom clean
+
+watcom-vclean: .SYMBOLIC
+ cd lib && $(MAKE) -u -f Makefile.Watcom vclean
+ cd src && $(MAKE) -u -f Makefile.Watcom vclean
+
+mingw32:
+ $(MAKE) -C lib -f Makefile.m32
+ $(MAKE) -C src -f Makefile.m32
+
+mingw32-clean:
+ $(MAKE) -C lib -f Makefile.m32 clean
+ $(MAKE) -C src -f Makefile.m32 clean
+ $(MAKE) -C docs/examples -f Makefile.m32 clean
+
+mingw32-vclean mingw32-distclean:
+ $(MAKE) -C lib -f Makefile.m32 vclean
+ $(MAKE) -C src -f Makefile.m32 vclean
+ $(MAKE) -C docs/examples -f Makefile.m32 vclean
+
+mingw32-examples%:
+ $(MAKE) -C docs/examples -f Makefile.m32 CFG=$@
+
+mingw32%:
+ $(MAKE) -C lib -f Makefile.m32 CFG=$@
+ $(MAKE) -C src -f Makefile.m32 CFG=$@
+
+vc:
+ cd winbuild
+ nmake /f Makefile.vc MACHINE=x86
+
+vc-x64:
+ cd winbuild
+ nmake /f Makefile.vc MACHINE=x64
+
+djgpp:
+ $(MAKE) -C lib -f Makefile.dj
+ $(MAKE) -C src -f Makefile.dj
+
+cygwin:
+ ./configure
+ make
+
+cygwin-ssl:
+ ./configure --with-ssl
+ make
+
+amiga:
+ cd ./lib && make -f makefile.amiga
+ cd ./src && make -f makefile.amiga
+
+netware:
+ $(MAKE) -C lib -f Makefile.netware
+ $(MAKE) -C src -f Makefile.netware
+
+netware-clean:
+ $(MAKE) -C lib -f Makefile.netware clean
+ $(MAKE) -C src -f Makefile.netware clean
+ $(MAKE) -C docs/examples -f Makefile.netware clean
+
+netware-vclean netware-distclean:
+ $(MAKE) -C lib -f Makefile.netware vclean
+ $(MAKE) -C src -f Makefile.netware vclean
+ $(MAKE) -C docs/examples -f Makefile.netware vclean
+
+netware-install:
+ $(MAKE) -C lib -f Makefile.netware install
+ $(MAKE) -C src -f Makefile.netware install
+
+netware-examples-%:
+ $(MAKE) -C docs/examples -f Makefile.netware CFG=$@
+
+netware-%:
+ $(MAKE) -C lib -f Makefile.netware CFG=$@
+ $(MAKE) -C src -f Makefile.netware CFG=$@
+
+unix: all
+
+unix-ssl: ssl
+
+linux: all
+
+linux-ssl: ssl
+ca-bundle: lib/mk-ca-bundle.pl
+ @echo "generate a fresh ca-bundle.crt"
+ @perl $< -b -l -u lib/ca-bundle.crt
-SHELL = /bin/sh
-
-srcdir = .
-top_srcdir = .
-prefix = /usr/local
-exec_prefix = ${prefix}
-
-bindir = ${exec_prefix}/bin
-sbindir = ${exec_prefix}/sbin
-libexecdir = ${exec_prefix}/libexec
-datadir = ${prefix}/share
-sysconfdir = ${prefix}/etc
-sharedstatedir = ${prefix}/com
-localstatedir = ${prefix}/var
-libdir = ${exec_prefix}/lib
-infodir = ${prefix}/info
-mandir = ${prefix}/man
-includedir = ${prefix}/include
-oldincludedir = /usr/include
-
-DESTDIR =
-
-pkgdatadir = $(datadir)/curl
-pkglibdir = $(libdir)/curl
-pkgincludedir = $(includedir)/curl
-
-top_builddir = .
-
-ACLOCAL = aclocal
-AUTOCONF = autoconf
-AUTOMAKE = automake
-AUTOHEADER = autoheader
-
-INSTALL = ./install-sh -c
-INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_SCRIPT = ${INSTALL_PROGRAM}
-transform = s,x,x,
-
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_alias = sparc-sun-solaris2.6
-host_triplet = sparc-sun-solaris2.6
-CC = gcc
-MAKEINFO = makeinfo
-NROFF = /bin/nroff
-PACKAGE = curl
-PERL = /usr/local/bin/perl
-RANLIB = ranlib
-VERSION = 6.3.1
-YACC = bison -y
-
-AUTOMAKE_OPTIONS = foreign no-dependencies
-
-man_MANS = curl.1
-
-EXTRA_DIST = $(man_MANS)
-
-SUBDIRS = lib src
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h ./src/config.h
-CONFIG_CLEAN_FILES =
-man1dir = $(mandir)/man1
-MANS = $(man_MANS)
-DIST_COMMON = README ./stamp-h1.in INSTALL Makefile.am Makefile.in TODO \
-acconfig.h aclocal.m4 config.guess config.h.in config.sub configure \
-configure.in install-sh missing mkinstalldirs src/config.h.in \
-src/stamp-h2.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-all: all-redirect
-.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): configure.in
- cd $(srcdir) && $(ACLOCAL)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
- cd $(srcdir) && $(AUTOCONF)
-
-config.h: stamp-h1
- @if test ! -f $@; then \
- rm -f stamp-h1; \
- $(MAKE) stamp-h1; \
- else :; fi
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES= CONFIG_HEADERS=config.h \
- $(SHELL) ./config.status
- @echo timestamp > stamp-h1 2> /dev/null
-$(srcdir)/config.h.in: $(srcdir)/stamp-h1.in
- @if test ! -f $@; then \
- rm -f $(srcdir)/stamp-h1.in; \
- $(MAKE) $(srcdir)/stamp-h1.in; \
- else :; fi
-$(srcdir)/stamp-h1.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
- cd $(top_srcdir) && $(AUTOHEADER)
- @echo timestamp > $(srcdir)/stamp-h1.in 2> /dev/null
-
-src/config.h: src/stamp-h2
- @if test ! -f $@; then \
- rm -f src/stamp-h2; \
- $(MAKE) src/stamp-h2; \
- else :; fi
-src/stamp-h2: $(srcdir)/src/config.h.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES= CONFIG_HEADERS=src/config.h \
- $(SHELL) ./config.status
- @echo timestamp > src/stamp-h2 2> /dev/null
-$(srcdir)/src/config.h.in: $(srcdir)/src/stamp-h2.in
- @if test ! -f $@; then \
- rm -f $(srcdir)/src/stamp-h2.in; \
- $(MAKE) $(srcdir)/src/stamp-h2.in; \
- else :; fi
-$(srcdir)/src/stamp-h2.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
- cd $(top_srcdir) && $(AUTOHEADER)
- @echo timestamp > $(srcdir)/src/stamp-h2.in 2> /dev/null
-
-mostlyclean-hdr:
-
-clean-hdr:
-
-distclean-hdr:
- -rm -f config.h src/config.h
-
-maintainer-clean-hdr:
-
-install-man1:
- $(mkinstalldirs) $(DESTDIR)$(man1dir)
- @list='$(man1_MANS)'; \
- l2='$(man_MANS)'; for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
- $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
- done
-
-uninstall-man1:
- @list='$(man1_MANS)'; \
- l2='$(man_MANS)'; for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
- rm -f $(DESTDIR)$(man1dir)/$$inst; \
- done
-install-man: $(MANS)
- @$(NORMAL_INSTALL)
- $(MAKE) $(AM_MAKEFLAGS) install-man1
-uninstall-man:
- @$(NORMAL_UNINSTALL)
- $(MAKE) $(AM_MAKEFLAGS) uninstall-man1
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-
-
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
- @set fnord $(MAKEFLAGS); amf=$$2; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @set fnord $(MAKEFLAGS); amf=$$2; \
- dot_seen=no; \
- rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
- rev="$$subdir $$rev"; \
- test "$$subdir" = "." && dot_seen=yes; \
- done; \
- test "$$dot_seen" = "no" && rev=". $$rev"; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $$unique $(LISP)
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
-
-clean-tags:
-
-distclean-tags:
- -rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- -rm -rf $(distdir)
- GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
- mkdir $(distdir)/=build
- mkdir $(distdir)/=inst
- dc_install_base=`cd $(distdir)/=inst && pwd`; \
- cd $(distdir)/=build \
- && ../configure --srcdir=.. --prefix=$$dc_install_base \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) dist
- -rm -rf $(distdir)
- @banner="$(distdir).tar.gz is ready for distribution"; \
- dashes=`echo "$$banner" | sed s/./=/g`; \
- echo "$$dashes"; \
- echo "$$banner"; \
- echo "$$dashes"
-dist: distdir
- -chmod -R a+r $(distdir)
- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
- -rm -rf $(distdir)
-dist-all: distdir
- -chmod -R a+r $(distdir)
- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
- -rm -rf $(distdir)
-distdir: $(DISTFILES)
- -rm -rf $(distdir)
- mkdir $(distdir)
- -chmod 777 $(distdir)
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
- cp -pr $$/$$file $(distdir)/$$file; \
- else \
- test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
- for subdir in $(SUBDIRS); do \
- if test "$$subdir" = .; then :; else \
- test -d $(distdir)/$$subdir \
- || mkdir $(distdir)/$$subdir \
- || exit 1; \
- chmod 777 $(distdir)/$$subdir; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
- || exit 1; \
- fi; \
- done
-info-am:
-info: info-recursive
-dvi-am:
-dvi: dvi-recursive
-check-am: all-am
-check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-all-recursive-am: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-install-exec-am:
-install-exec: install-exec-recursive
-
-install-data-am: install-man
-install-data: install-data-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am: uninstall-man
-uninstall: uninstall-recursive
-all-am: Makefile $(MANS) config.h
-all-redirect: all-recursive-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
- $(mkinstalldirs) $(DESTDIR)$(mandir)/man1
-
-
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic
-
-mostlyclean: mostlyclean-recursive
-
-clean-am: clean-hdr clean-tags clean-generic mostlyclean-am
-
-clean: clean-recursive
-
-distclean-am: distclean-hdr distclean-tags distclean-generic clean-am
-
-distclean: distclean-recursive
- -rm -f config.status
-
-maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \
- maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f config.status
-
-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
-install-man1 uninstall-man1 install-man uninstall-man \
-install-data-recursive uninstall-data-recursive install-exec-recursive \
-uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
-all-recursive check-recursive installcheck-recursive info-recursive \
-dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs-am \
-installdirs mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+ca-firefox: lib/firefox-db2pem.sh
+ @echo "generate a fresh ca-bundle.crt"
+ ./lib/firefox-db2pem.sh lib/ca-bundle.crt
projects / platform / upstream / curl.git / blobdiff