-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
+@SET_MAKE@
+
+#***************************************************************************
+# _ _ ____ _
+# Project ___| | | | _ \| |
+# / __| | | | |_) | |
+# | (__| |_| | _ <| |___
+# \___|\___/|_| \_\_____|
#
-# $Id$
+# Copyright (C) 1998 - 2017, Daniel Stenberg, <daniel@haxx.se>, et al.
#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at https://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+###########################################################################
+#***************************************************************************
+# _ _ ____ _
+# Project ___| | | | _ \| |
+# / __| | | | |_) | |
+# | (__| |_| | _ <| |___
+# \___|\___/|_| \_\_____|
+#
+# Copyright (C) 1998 - 2018, Daniel Stenberg, <daniel@haxx.se>, et al.
+#
+# This software is licensed as described in the file COPYING, which
+# you should have received as part of this distribution. The terms
+# are also available at https://curl.haxx.se/docs/copyright.html.
+#
+# You may opt to use, copy, modify, merge, publish, distribute and/or sell
+# copies of the Software, and permit persons to whom the Software is
+# furnished to do so, under the terms of the COPYING file.
+#
+# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+# KIND, either express or implied.
+#
+###########################################################################
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
+# ./src/Makefile.inc
+# Using the backslash as line continuation character might be problematic
+# with some make flavours, as Watcom's wmake showed us already. If we
+# ever want to change this in a portable manner then we should consider
+# this idea (posted to the libcurl list by Adam Kellas):
+# CSRC1 = file1.c file2.c file3.c
+# CSRC2 = file4.c file5.c file6.c
+# CSOURCES = $(CSRC1) $(CSRC2)
-DESTDIR =
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-host_alias = @host_alias@
+build_triplet = @build@
host_triplet = @host@
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/ax_code_coverage.m4 \
+ $(top_srcdir)/m4/curl-compilers.m4 \
+ $(top_srcdir)/m4/curl-confopts.m4 \
+ $(top_srcdir)/m4/curl-functions.m4 \
+ $(top_srcdir)/m4/curl-openssl.m4 \
+ $(top_srcdir)/m4/curl-override.m4 \
+ $(top_srcdir)/m4/curl-reentrant.m4 $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/m4/xc-am-iface.m4 \
+ $(top_srcdir)/m4/xc-cc-check.m4 \
+ $(top_srcdir)/m4/xc-lt-iface.m4 \
+ $(top_srcdir)/m4/xc-translit.m4 \
+ $(top_srcdir)/m4/xc-val-flgs.m4 \
+ $(top_srcdir)/m4/zz40-xc-ovr.m4 \
+ $(top_srcdir)/m4/zz50-xc-ovr.m4 \
+ $(top_srcdir)/m4/zz60-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps) $(am__DIST_COMMON)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/lib/curl_config.h
+CONFIG_CLEAN_FILES = curl-config libcurl.pc
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"
+SCRIPTS = $(bin_SCRIPTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+ ctags-recursive dvi-recursive html-recursive info-recursive \
+ install-data-recursive install-dvi-recursive \
+ install-exec-recursive install-html-recursive \
+ install-info-recursive install-pdf-recursive \
+ install-ps-recursive install-recursive installcheck-recursive \
+ installdirs-recursive pdf-recursive ps-recursive \
+ tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+DATA = $(pkgconfig_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+ $(RECURSIVE_TARGETS) \
+ $(RECURSIVE_CLEAN_TARGETS) \
+ $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+ cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/curl-config.in \
+ $(srcdir)/lib/Makefile.inc $(srcdir)/libcurl.pc.in \
+ $(srcdir)/src/Makefile.inc COPYING README compile config.guess \
+ config.sub depcomp install-sh ltmain.sh missing
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ if test -d "$(distdir)"; then \
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -rf "$(distdir)" \
+ || { sleep 5 && rm -rf "$(distdir)"; }; \
+ else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+ dir0=`pwd`; \
+ sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+ sed_rest='s,^[^/]*/*,,'; \
+ sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+ sed_butlast='s,/*[^/]*$$,,'; \
+ while test -n "$$dir1"; do \
+ first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+ if test "$$first" != "."; then \
+ if test "$$first" = ".."; then \
+ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+ else \
+ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+ if test "$$first2" = "$$first"; then \
+ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+ else \
+ dir2="../$$dir2"; \
+ fi; \
+ dir0="$$dir0"/"$$first"; \
+ fi; \
+ fi; \
+ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+ done; \
+ reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+DIST_TARGETS = dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BLANK_AT_MAKETIME = @BLANK_AT_MAKETIME@
CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@
+CODE_COVERAGE_CFLAGS = @CODE_COVERAGE_CFLAGS@
+CODE_COVERAGE_CPPFLAGS = @CODE_COVERAGE_CPPFLAGS@
+CODE_COVERAGE_CXXFLAGS = @CODE_COVERAGE_CXXFLAGS@
+CODE_COVERAGE_ENABLED = @CODE_COVERAGE_ENABLED@
+CODE_COVERAGE_LDFLAGS = @CODE_COVERAGE_LDFLAGS@
+CODE_COVERAGE_LIBS = @CODE_COVERAGE_LIBS@
+CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CPPFLAG_CURL_STATICLIB = @CPPFLAG_CURL_STATICLIB@
+CURLVERSION = @CURLVERSION@
+CURL_CA_BUNDLE = @CURL_CA_BUNDLE@
+CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@
+CURL_DISABLE_DICT = @CURL_DISABLE_DICT@
+CURL_DISABLE_FILE = @CURL_DISABLE_FILE@
+CURL_DISABLE_FTP = @CURL_DISABLE_FTP@
+CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@
+CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@
+CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@
+CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@
+CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@
+CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@
+CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@
+CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@
+CURL_DISABLE_SMB = @CURL_DISABLE_SMB@
+CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@
+CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@
+CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@
+CURL_LT_SHLIB_VERSIONED_FLAVOUR = @CURL_LT_SHLIB_VERSIONED_FLAVOUR@
+CURL_NETWORK_AND_TIME_LIBS = @CURL_NETWORK_AND_TIME_LIBS@
+CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@
+CURL_WITH_MULTI_SSL = @CURL_WITH_MULTI_SSL@
+CYGPATH_W = @CYGPATH_W@
+DEFAULT_SSL_BACKEND = @DEFAULT_SSL_BACKEND@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+ENABLE_SHARED = @ENABLE_SHARED@
+ENABLE_STATIC = @ENABLE_STATIC@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GENHTML = @GENHTML@
+GREP = @GREP@
+HAVE_BROTLI = @HAVE_BROTLI@
+HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@
+HAVE_LDAP_SSL = @HAVE_LDAP_SSL@
+HAVE_LIBZ = @HAVE_LIBZ@
+HAVE_OPENSSL_SRP = @HAVE_OPENSSL_SRP@
+IDN_ENABLED = @IDN_ENABLED@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+IPV6_ENABLED = @IPV6_ENABLED@
+LCOV = @LCOV@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBCURL_LIBS = @LIBCURL_LIBS@
+LIBMETALINK_CPPFLAGS = @LIBMETALINK_CPPFLAGS@
+LIBMETALINK_LDFLAGS = @LIBMETALINK_LDFLAGS@
+LIBMETALINK_LIBS = @LIBMETALINK_LIBS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MANOPT = @MANOPT@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
NROFF = @NROFF@
+NSS_LIBS = @NSS_LIBS@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
+PKGADD_NAME = @PKGADD_NAME@
+PKGADD_PKG = @PKGADD_PKG@
+PKGADD_VENDOR = @PKGADD_VENDOR@
+PKGCONFIG = @PKGCONFIG@
+RANDOM_FILE = @RANDOM_FILE@
RANLIB = @RANLIB@
+REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SSL_BACKENDS = @SSL_BACKENDS@
+SSL_ENABLED = @SSL_ENABLED@
+SSL_LIBS = @SSL_LIBS@
+STRIP = @STRIP@
+SUPPORT_FEATURES = @SUPPORT_FEATURES@
+SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@
+USE_ARES = @USE_ARES@
+USE_AXTLS = @USE_AXTLS@
+USE_CYASSL = @USE_CYASSL@
+USE_DARWINSSL = @USE_DARWINSSL@
+USE_GNUTLS = @USE_GNUTLS@
+USE_GNUTLS_NETTLE = @USE_GNUTLS_NETTLE@
+USE_LIBRTMP = @USE_LIBRTMP@
+USE_LIBSSH = @USE_LIBSSH@
+USE_LIBSSH2 = @USE_LIBSSH2@
+USE_MBEDTLS = @USE_MBEDTLS@
+USE_NGHTTP2 = @USE_NGHTTP2@
+USE_NSS = @USE_NSS@
+USE_OPENLDAP = @USE_OPENLDAP@
+USE_POLARSSL = @USE_POLARSSL@
+USE_SCHANNEL = @USE_SCHANNEL@
+USE_UNIX_SOCKETS = @USE_UNIX_SOCKETS@
+USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@
VERSION = @VERSION@
-YACC = @YACC@
+VERSIONNUM = @VERSIONNUM@
+ZLIB_LIBS = @ZLIB_LIBS@
+ZSH_FUNCTIONS_DIR = @ZSH_FUNCTIONS_DIR@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+libext = @libext@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = foreign
+ACLOCAL_AMFLAGS = -I m4
+CMAKE_DIST = CMakeLists.txt CMake/CMakeConfigurableFile.in \
+ CMake/CurlTests.c CMake/FindGSS.cmake CMake/OtherTests.cmake \
+ CMake/Platforms/WindowsCache.cmake CMake/Utilities.cmake \
+ CMake/Macros.cmake \
+ CMake/CurlSymbolHiding.cmake CMake/FindCARES.cmake \
+ CMake/FindLibSSH2.cmake CMake/FindNGHTTP2.cmake \
+ CMake/FindMbedTLS.cmake CMake/cmake_uninstall.cmake.in \
+ CMake/curl-config.cmake
-AUTOMAKE_OPTIONS = foreign no-dependencies
+VC6_LIBTMPL = projects/Windows/VC6/lib/libcurl.tmpl
+VC6_LIBDSP = projects/Windows/VC6/lib/libcurl.dsp.dist
+VC6_LIBDSP_DEPS = $(VC6_LIBTMPL) Makefile.am lib/Makefile.inc
+VC6_SRCTMPL = projects/Windows/VC6/src/curl.tmpl
+VC6_SRCDSP = projects/Windows/VC6/src/curl.dsp.dist
+VC6_SRCDSP_DEPS = $(VC6_SRCTMPL) Makefile.am src/Makefile.inc
+VC7_LIBTMPL = projects/Windows/VC7/lib/libcurl.tmpl
+VC7_LIBVCPROJ = projects/Windows/VC7/lib/libcurl.vcproj.dist
+VC7_LIBVCPROJ_DEPS = $(VC7_LIBTMPL) Makefile.am lib/Makefile.inc
+VC7_SRCTMPL = projects/Windows/VC7/src/curl.tmpl
+VC7_SRCVCPROJ = projects/Windows/VC7/src/curl.vcproj.dist
+VC7_SRCVCPROJ_DEPS = $(VC7_SRCTMPL) Makefile.am src/Makefile.inc
+VC71_LIBTMPL = projects/Windows/VC7.1/lib/libcurl.tmpl
+VC71_LIBVCPROJ = projects/Windows/VC7.1/lib/libcurl.vcproj.dist
+VC71_LIBVCPROJ_DEPS = $(VC71_LIBTMPL) Makefile.am lib/Makefile.inc
+VC71_SRCTMPL = projects/Windows/VC7.1/src/curl.tmpl
+VC71_SRCVCPROJ = projects/Windows/VC7.1/src/curl.vcproj.dist
+VC71_SRCVCPROJ_DEPS = $(VC71_SRCTMPL) Makefile.am src/Makefile.inc
+VC8_LIBTMPL = projects/Windows/VC8/lib/libcurl.tmpl
+VC8_LIBVCPROJ = projects/Windows/VC8/lib/libcurl.vcproj.dist
+VC8_LIBVCPROJ_DEPS = $(VC8_LIBTMPL) Makefile.am lib/Makefile.inc
+VC8_SRCTMPL = projects/Windows/VC8/src/curl.tmpl
+VC8_SRCVCPROJ = projects/Windows/VC8/src/curl.vcproj.dist
+VC8_SRCVCPROJ_DEPS = $(VC8_SRCTMPL) Makefile.am src/Makefile.inc
+VC9_LIBTMPL = projects/Windows/VC9/lib/libcurl.tmpl
+VC9_LIBVCPROJ = projects/Windows/VC9/lib/libcurl.vcproj.dist
+VC9_LIBVCPROJ_DEPS = $(VC9_LIBTMPL) Makefile.am lib/Makefile.inc
+VC9_SRCTMPL = projects/Windows/VC9/src/curl.tmpl
+VC9_SRCVCPROJ = projects/Windows/VC9/src/curl.vcproj.dist
+VC9_SRCVCPROJ_DEPS = $(VC9_SRCTMPL) Makefile.am src/Makefile.inc
+VC10_LIBTMPL = projects/Windows/VC10/lib/libcurl.tmpl
+VC10_LIBVCXPROJ = projects/Windows/VC10/lib/libcurl.vcxproj.dist
+VC10_LIBVCXPROJ_DEPS = $(VC10_LIBTMPL) Makefile.am lib/Makefile.inc
+VC10_SRCTMPL = projects/Windows/VC10/src/curl.tmpl
+VC10_SRCVCXPROJ = projects/Windows/VC10/src/curl.vcxproj.dist
+VC10_SRCVCXPROJ_DEPS = $(VC10_SRCTMPL) Makefile.am src/Makefile.inc
+VC11_LIBTMPL = projects/Windows/VC11/lib/libcurl.tmpl
+VC11_LIBVCXPROJ = projects/Windows/VC11/lib/libcurl.vcxproj.dist
+VC11_LIBVCXPROJ_DEPS = $(VC11_LIBTMPL) Makefile.am lib/Makefile.inc
+VC11_SRCTMPL = projects/Windows/VC11/src/curl.tmpl
+VC11_SRCVCXPROJ = projects/Windows/VC11/src/curl.vcxproj.dist
+VC11_SRCVCXPROJ_DEPS = $(VC11_SRCTMPL) Makefile.am src/Makefile.inc
+VC12_LIBTMPL = projects/Windows/VC12/lib/libcurl.tmpl
+VC12_LIBVCXPROJ = projects/Windows/VC12/lib/libcurl.vcxproj.dist
+VC12_LIBVCXPROJ_DEPS = $(VC12_LIBTMPL) Makefile.am lib/Makefile.inc
+VC12_SRCTMPL = projects/Windows/VC12/src/curl.tmpl
+VC12_SRCVCXPROJ = projects/Windows/VC12/src/curl.vcxproj.dist
+VC12_SRCVCXPROJ_DEPS = $(VC12_SRCTMPL) Makefile.am src/Makefile.inc
+VC14_LIBTMPL = projects/Windows/VC14/lib/libcurl.tmpl
+VC14_LIBVCXPROJ = projects/Windows/VC14/lib/libcurl.vcxproj.dist
+VC14_LIBVCXPROJ_DEPS = $(VC14_LIBTMPL) Makefile.am lib/Makefile.inc
+VC14_SRCTMPL = projects/Windows/VC14/src/curl.tmpl
+VC14_SRCVCXPROJ = projects/Windows/VC14/src/curl.vcxproj.dist
+VC14_SRCVCXPROJ_DEPS = $(VC14_SRCTMPL) Makefile.am src/Makefile.inc
+VC15_LIBTMPL = projects/Windows/VC15/lib/libcurl.tmpl
+VC15_LIBVCXPROJ = projects/Windows/VC15/lib/libcurl.vcxproj.dist
+VC15_LIBVCXPROJ_DEPS = $(VC15_LIBTMPL) Makefile.am lib/Makefile.inc
+VC15_SRCTMPL = projects/Windows/VC15/src/curl.tmpl
+VC15_SRCVCXPROJ = projects/Windows/VC15/src/curl.vcxproj.dist
+VC15_SRCVCXPROJ_DEPS = $(VC15_SRCTMPL) Makefile.am src/Makefile.inc
+VC_DIST = projects/README \
+ projects/build-openssl.bat \
+ projects/build-wolfssl.bat \
+ projects/checksrc.bat \
+ projects/Windows/VC6/curl-all.dsw \
+ projects/Windows/VC6/lib/libcurl.dsw \
+ projects/Windows/VC6/src/curl.dsw \
+ projects/Windows/VC7/curl-all.sln \
+ projects/Windows/VC7/lib/libcurl.sln \
+ projects/Windows/VC7/src/curl.sln \
+ projects/Windows/VC7.1/curl-all.sln \
+ projects/Windows/VC7.1/lib/libcurl.sln \
+ projects/Windows/VC7.1/src/curl.sln \
+ projects/Windows/VC8/curl-all.sln \
+ projects/Windows/VC8/lib/libcurl.sln \
+ projects/Windows/VC8/src/curl.sln \
+ projects/Windows/VC9/curl-all.sln \
+ projects/Windows/VC9/lib/libcurl.sln \
+ projects/Windows/VC9/src/curl.sln \
+ projects/Windows/VC10/curl-all.sln \
+ projects/Windows/VC10/lib/libcurl.sln \
+ projects/Windows/VC10/lib/libcurl.vcxproj.filters \
+ projects/Windows/VC10/src/curl.sln \
+ projects/Windows/VC10/src/curl.vcxproj.filters \
+ projects/Windows/VC11/curl-all.sln \
+ projects/Windows/VC11/lib/libcurl.sln \
+ projects/Windows/VC11/lib/libcurl.vcxproj.filters \
+ projects/Windows/VC11/src/curl.sln \
+ projects/Windows/VC11/src/curl.vcxproj.filters \
+ projects/Windows/VC12/curl-all.sln \
+ projects/Windows/VC12/lib/libcurl.sln \
+ projects/Windows/VC12/lib/libcurl.vcxproj.filters \
+ projects/Windows/VC12/src/curl.sln \
+ projects/Windows/VC12/src/curl.vcxproj.filters \
+ projects/Windows/VC14/curl-all.sln \
+ projects/Windows/VC14/lib/libcurl.sln \
+ projects/Windows/VC14/lib/libcurl.vcxproj.filters \
+ projects/Windows/VC14/src/curl.sln \
+ projects/Windows/VC14/src/curl.vcxproj.filters \
+ projects/Windows/VC15/curl-all.sln \
+ projects/Windows/VC15/lib/libcurl.sln \
+ projects/Windows/VC15/lib/libcurl.vcxproj.filters \
+ projects/Windows/VC15/src/curl.sln \
+ projects/Windows/VC15/src/curl.vcxproj.filters \
+ projects/generate.bat \
+ projects/wolfssl_options.h \
+ projects/wolfssl_override.props
-man_MANS = curl.1
+WINBUILD_DIST = winbuild/BUILD.WINDOWS.txt winbuild/gen_resp_file.bat \
+ winbuild/MakefileBuild.vc winbuild/Makefile.vc
-EXTRA_DIST = $(man_MANS)
+EXTRA_DIST = CHANGES COPYING maketgz Makefile.dist curl-config.in \
+ RELEASE-NOTES buildconf libcurl.pc.in MacOSX-Framework scripts/zsh.pl \
+ scripts/updatemanpages.pl $(CMAKE_DIST) $(VC_DIST) $(WINBUILD_DIST) \
+ lib/libcurl.vers.in buildconf.bat scripts/coverage.sh
+CLEANFILES = $(VC6_LIBDSP) $(VC6_SRCDSP) $(VC7_LIBVCPROJ) $(VC7_SRCVCPROJ) \
+ $(VC71_LIBVCPROJ) $(VC71_SRCVCPROJ) $(VC8_LIBVCPROJ) $(VC8_SRCVCPROJ) \
+ $(VC9_LIBVCPROJ) $(VC9_SRCVCPROJ) $(VC10_LIBVCXPROJ) $(VC10_SRCVCXPROJ) \
+ $(VC11_LIBVCXPROJ) $(VC11_SRCVCXPROJ) $(VC12_LIBVCXPROJ) $(VC12_SRCVCXPROJ) \
+ $(VC14_LIBVCXPROJ) $(VC14_SRCVCXPROJ) $(VC15_LIBVCXPROJ) $(VC15_SRCVCXPROJ)
+
+bin_SCRIPTS = curl-config
SUBDIRS = lib src
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h ./src/config.h
-CONFIG_CLEAN_FILES =
-man1dir = $(mandir)/man1
-MANS = $(man_MANS)
-DIST_COMMON = README ./stamp-h1.in INSTALL Makefile.am Makefile.in TODO \
-acconfig.h aclocal.m4 config.guess config.h.in config.sub configure \
-configure.in install-sh missing mkinstalldirs
+DIST_SUBDIRS = $(SUBDIRS) tests packages scripts include docs
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = libcurl.pc
+LIB_VAUTH_CFILES = vauth/vauth.c vauth/cleartext.c vauth/cram.c \
+ vauth/digest.c vauth/digest_sspi.c vauth/krb5_gssapi.c \
+ vauth/krb5_sspi.c vauth/ntlm.c vauth/ntlm_sspi.c vauth/oauth2.c \
+ vauth/spnego_gssapi.c vauth/spnego_sspi.c
+LIB_VAUTH_HFILES = vauth/vauth.h vauth/digest.h vauth/ntlm.h
+LIB_VTLS_CFILES = vtls/openssl.c vtls/gtls.c vtls/vtls.c vtls/nss.c \
+ vtls/polarssl.c vtls/polarssl_threadlock.c vtls/axtls.c \
+ vtls/cyassl.c vtls/schannel.c vtls/darwinssl.c vtls/gskit.c \
+ vtls/mbedtls.c
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+LIB_VTLS_HFILES = vtls/openssl.h vtls/vtls.h vtls/gtls.h \
+ vtls/nssg.h vtls/polarssl.h vtls/polarssl_threadlock.h vtls/axtls.h \
+ vtls/cyassl.h vtls/schannel.h vtls/darwinssl.h vtls/gskit.h \
+ vtls/mbedtls.h
-TAR = gtar
-GZIP_ENV = --best
-all: all-redirect
-.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
+LIB_CFILES = file.c timeval.c base64.c hostip.c progress.c formdata.c \
+ cookie.c http.c sendf.c ftp.c url.c dict.c if2ip.c speedcheck.c \
+ ldap.c version.c getenv.c escape.c mprintf.c telnet.c netrc.c \
+ getinfo.c transfer.c strcase.c easy.c security.c curl_fnmatch.c \
+ fileinfo.c ftplistparser.c wildcard.c krb5.c memdebug.c http_chunks.c \
+ strtok.c connect.c llist.c hash.c multi.c content_encoding.c share.c \
+ http_digest.c md4.c md5.c http_negotiate.c inet_pton.c strtoofft.c \
+ strerror.c amigaos.c hostasyn.c hostip4.c hostip6.c hostsyn.c \
+ inet_ntop.c parsedate.c select.c tftp.c splay.c strdup.c socks.c \
+ ssh.c ssh-libssh.c curl_addrinfo.c socks_gssapi.c socks_sspi.c \
+ curl_sspi.c slist.c nonblock.c curl_memrchr.c imap.c pop3.c smtp.c \
+ pingpong.c rtsp.c curl_threads.c warnless.c hmac.c curl_rtmp.c \
+ openldap.c curl_gethostname.c gopher.c idn_win32.c \
+ http_proxy.c non-ascii.c asyn-ares.c asyn-thread.c curl_gssapi.c \
+ http_ntlm.c curl_ntlm_wb.c curl_ntlm_core.c curl_sasl.c rand.c \
+ curl_multibyte.c hostcheck.c conncache.c pipeline.c dotdot.c \
+ x509asn1.c http2.c smb.c curl_endian.c curl_des.c system_win32.c \
+ mime.c sha256.c setopt.c curl_path.c curl_ctype.c curl_range.c
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+LIB_HFILES = arpa_telnet.h netrc.h file.h timeval.h hostip.h progress.h \
+ formdata.h cookie.h http.h sendf.h ftp.h url.h dict.h if2ip.h \
+ speedcheck.h urldata.h curl_ldap.h escape.h telnet.h getinfo.h \
+ strcase.h curl_sec.h memdebug.h http_chunks.h curl_fnmatch.h \
+ wildcard.h fileinfo.h ftplistparser.h strtok.h connect.h llist.h \
+ hash.h content_encoding.h share.h curl_md4.h curl_md5.h http_digest.h \
+ http_negotiate.h inet_pton.h amigaos.h strtoofft.h strerror.h \
+ inet_ntop.h curlx.h curl_memory.h curl_setup.h transfer.h select.h \
+ easyif.h multiif.h parsedate.h tftp.h sockaddr.h splay.h strdup.h \
+ socks.h ssh.h curl_base64.h curl_addrinfo.h curl_sspi.h \
+ slist.h nonblock.h curl_memrchr.h imap.h pop3.h smtp.h pingpong.h \
+ rtsp.h curl_threads.h warnless.h curl_hmac.h curl_rtmp.h \
+ curl_gethostname.h gopher.h http_proxy.h non-ascii.h asyn.h \
+ http_ntlm.h curl_gssapi.h curl_ntlm_wb.h curl_ntlm_core.h \
+ curl_sasl.h curl_multibyte.h hostcheck.h conncache.h \
+ curl_setup_once.h multihandle.h setup-vms.h pipeline.h dotdot.h \
+ x509asn1.h http2.h sigpipe.h smb.h curl_endian.h curl_des.h \
+ curl_printf.h system_win32.h rand.h mime.h curl_sha256.h setopt.h \
+ curl_path.h curl_ctype.h curl_range.h
-$(ACLOCAL_M4): configure.in
- cd $(srcdir) && $(ACLOCAL)
+LIB_RCFILES = libcurl.rc
+CSOURCES = $(LIB_CFILES) $(LIB_VAUTH_CFILES) $(LIB_VTLS_CFILES)
+HHEADERS = $(LIB_HFILES) $(LIB_VAUTH_HFILES) $(LIB_VTLS_HFILES)
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
- cd $(srcdir) && $(AUTOCONF)
-
-config.h: stamp-h1
- @if test ! -f $@; then \
- rm -f stamp-h1; \
- $(MAKE) stamp-h1; \
- else :; fi
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES= CONFIG_HEADERS=config.h \
- $(SHELL) ./config.status
- @echo timestamp > stamp-h1 2> /dev/null
-$(srcdir)/config.h.in: $(srcdir)/stamp-h1.in
- @if test ! -f $@; then \
- rm -f $(srcdir)/stamp-h1.in; \
- $(MAKE) $(srcdir)/stamp-h1.in; \
- else :; fi
-$(srcdir)/stamp-h1.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
- cd $(top_srcdir) && $(AUTOHEADER)
- @echo timestamp > $(srcdir)/stamp-h1.in 2> /dev/null
-
-mostlyclean-hdr:
-
-clean-hdr:
-
-distclean-hdr:
- -rm -f config.h
-
-maintainer-clean-hdr:
-
-install-man1:
- $(mkinstalldirs) $(DESTDIR)$(man1dir)
- @list='$(man1_MANS)'; \
- l2='$(man_MANS)'; for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
- $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
- done
+# libcurl has sources that provide functions named curlx_* that aren't part of
+# the official API, but we re-use the code here to avoid duplication.
+CURLX_CFILES = \
+ ../lib/strtoofft.c \
+ ../lib/nonblock.c \
+ ../lib/warnless.c \
+ ../lib/curl_ctype.c
+
+CURLX_HFILES = \
+ ../lib/curl_setup.h \
+ ../lib/strtoofft.h \
+ ../lib/nonblock.h \
+ ../lib/warnless.h \
+ ../lib/curl_ctype.h
+
+CURL_CFILES = \
+ slist_wc.c \
+ tool_binmode.c \
+ tool_bname.c \
+ tool_cb_dbg.c \
+ tool_cb_hdr.c \
+ tool_cb_prg.c \
+ tool_cb_rea.c \
+ tool_cb_see.c \
+ tool_cb_wrt.c \
+ tool_cfgable.c \
+ tool_convert.c \
+ tool_dirhie.c \
+ tool_doswin.c \
+ tool_easysrc.c \
+ tool_filetime.c \
+ tool_formparse.c \
+ tool_getparam.c \
+ tool_getpass.c \
+ tool_help.c \
+ tool_helpers.c \
+ tool_homedir.c \
+ tool_hugehelp.c \
+ tool_libinfo.c \
+ tool_main.c \
+ tool_metalink.c \
+ tool_msgs.c \
+ tool_operate.c \
+ tool_operhlp.c \
+ tool_panykey.c \
+ tool_paramhlp.c \
+ tool_parsecfg.c \
+ tool_strdup.c \
+ tool_setopt.c \
+ tool_sleep.c \
+ tool_urlglob.c \
+ tool_util.c \
+ tool_vms.c \
+ tool_writeout.c \
+ tool_xattr.c
+
+CURL_HFILES = \
+ slist_wc.h \
+ tool_binmode.h \
+ tool_bname.h \
+ tool_cb_dbg.h \
+ tool_cb_hdr.h \
+ tool_cb_prg.h \
+ tool_cb_rea.h \
+ tool_cb_see.h \
+ tool_cb_wrt.h \
+ tool_cfgable.h \
+ tool_convert.h \
+ tool_dirhie.h \
+ tool_doswin.h \
+ tool_easysrc.h \
+ tool_filetime.h \
+ tool_formparse.h \
+ tool_getparam.h \
+ tool_getpass.h \
+ tool_help.h \
+ tool_helpers.h \
+ tool_homedir.h \
+ tool_hugehelp.h \
+ tool_libinfo.h \
+ tool_main.h \
+ tool_metalink.h \
+ tool_msgs.h \
+ tool_operate.h \
+ tool_operhlp.h \
+ tool_panykey.h \
+ tool_paramhlp.h \
+ tool_parsecfg.h \
+ tool_sdecls.h \
+ tool_setopt.h \
+ tool_setup.h \
+ tool_sleep.h \
+ tool_strdup.h \
+ tool_urlglob.h \
+ tool_util.h \
+ tool_version.h \
+ tool_vms.h \
+ tool_writeout.h \
+ tool_xattr.h
-uninstall-man1:
- @list='$(man1_MANS)'; \
- l2='$(man_MANS)'; for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
+CURL_RCFILES = curl.rc
+
+# curl_SOURCES is special and gets assigned in src/Makefile.am
+CURL_FILES = $(CURL_CFILES) $(CURLX_CFILES) $(CURL_HFILES)
+all: all-recursive
+
+.SUFFIXES:
+am--refresh: Makefile
+ @:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
esac; \
done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
- rm -f $(DESTDIR)$(man1dir)/$$inst; \
- done
-install-man: $(MANS)
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+$(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+curl-config: $(top_builddir)/config.status $(srcdir)/curl-config.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+libcurl.pc: $(top_builddir)/config.status $(srcdir)/libcurl.pc.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+install-binSCRIPTS: $(bin_SCRIPTS)
@$(NORMAL_INSTALL)
- $(MAKE) $(AM_MAKEFLAGS) install-man1
-uninstall-man:
+ @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n' \
+ -e 'h;s|.*|.|' \
+ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+ if (++n[d] == $(am__install_max)) { \
+ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+ else { print "f", d "/" $$4, $$1 } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binSCRIPTS:
@$(NORMAL_UNINSTALL)
- $(MAKE) $(AM_MAKEFLAGS) uninstall-man1
+ @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 's,.*/,,;$(transform)'`; \
+ dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
+mostlyclean-libtool:
+ -rm -f *.lo
-@SET_MAKE@
+clean-libtool:
+ -rm -rf .libs _libs
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
- @set fnord $(MAKEFLAGS); amf=$$2; \
+distclean-libtool:
+ -rm -f libtool config.lt
+install-pkgconfigDATA: $(pkgconfig_DATA)
+ @$(NORMAL_INSTALL)
+ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
+ done
+
+uninstall-pkgconfigDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+ @fail=; \
+ if $(am__make_keepgoing); then \
+ failcom='fail=yes'; \
+ else \
+ failcom='exit 1'; \
+ fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
else \
local_target="$$target"; \
fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @set fnord $(MAKEFLAGS); amf=$$2; \
- dot_seen=no; \
- rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
- rev="$$subdir $$rev"; \
- test "$$subdir" = "." && dot_seen=yes; \
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
done; \
- test "$$dot_seen" = "no" && rev=". $$rev"; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
else \
- local_target="$$target"; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
+ fi
+ctags: ctags-recursive
-tags: TAGS
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
-ID: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $$unique $(LISP)
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+ -rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
-mostlyclean-tags:
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ test -d "$(distdir)" || mkdir "$(distdir)"
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ $(am__make_dryrun) \
+ || test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+ $(am__relativize); \
+ new_distdir=$$reldir; \
+ dir1=$$subdir; dir2="$(top_distdir)"; \
+ $(am__relativize); \
+ new_top_distdir=$$reldir; \
+ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+ ($(am__cd) $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$new_top_distdir" \
+ distdir="$$new_distdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ am__skip_mode_fix=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-hook
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
+ $(am__post_remove_distdir)
-clean-tags:
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+ $(am__post_remove_distdir)
-distclean-tags:
- -rm -f TAGS ID
+dist-lzip: distdir
+ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+ $(am__post_remove_distdir)
-maintainer-clean-tags:
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+ $(am__post_remove_distdir)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
+dist-tarZ: distdir
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__post_remove_distdir)
+
+dist-shar: distdir
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
+ $(am__post_remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__post_remove_distdir)
+
+dist dist-all:
+ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+ $(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
- -rm -rf $(distdir)
- GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
- mkdir $(distdir)/=build
- mkdir $(distdir)/=inst
- dc_install_base=`cd $(distdir)/=inst && pwd`; \
- cd $(distdir)/=build \
- && ../configure --srcdir=.. --prefix=$$dc_install_base \
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lz*) \
+ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir)
+ chmod u+w $(distdir)
+ mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+ chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build/sub \
+ && ../../configure \
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) dist
- -rm -rf $(distdir)
- @banner="$(distdir).tar.gz is ready for distribution"; \
- dashes=`echo "$$banner" | sed s/./=/g`; \
- echo "$$dashes"; \
- echo "$$banner"; \
- echo "$$dashes"
-dist: distdir
- -chmod -R a+r $(distdir)
- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
- -rm -rf $(distdir)
-dist-all: distdir
- -chmod -R a+r $(distdir)
- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
- -rm -rf $(distdir)
-distdir: $(DISTFILES)
- -rm -rf $(distdir)
- mkdir $(distdir)
- -chmod 777 $(distdir)
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
- if test -d $$d/$$file; then \
- cp -pr $$/$$file $(distdir)/$$file; \
- else \
- test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file || :; \
- fi; \
- done
- for subdir in $(SUBDIRS); do \
- if test "$$subdir" = .; then :; else \
- test -d $(distdir)/$$subdir \
- || mkdir $(distdir)/$$subdir \
- || exit 1; \
- chmod 777 $(distdir)/$$subdir; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
- || exit 1; \
- fi; \
- done
-info-am:
-info: info-recursive
-dvi-am:
-dvi: dvi-recursive
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
+ $(am__post_remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+ @test -n '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: trying to run $@ with an empty' \
+ '$$(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ $(am__cd) '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
check-am: all-am
check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-all-recursive-am: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-install-exec-am:
+all-am: Makefile $(SCRIPTS) $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-recursive
install-exec: install-exec-recursive
-
-install-data-am: install-man
install-data: install-data-recursive
+uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am: uninstall-man
-uninstall: uninstall-recursive
-all-am: Makefile $(MANS) config.h
-all-redirect: all-recursive-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
- $(mkinstalldirs) $(DESTDIR)$(mandir)/man1
-
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
mostlyclean-generic:
clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
-mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
-mostlyclean: mostlyclean-recursive
+clean-am: clean-generic clean-libtool mostlyclean-am
-clean-am: clean-hdr clean-tags clean-generic mostlyclean-am
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+ distclean-tags
-clean: clean-recursive
+dvi: dvi-recursive
-distclean-am: distclean-hdr distclean-tags distclean-generic clean-am
+dvi-am:
-distclean: distclean-recursive
- -rm -f config.status
+html-am:
-maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \
- maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
+info: info-recursive
+
+info-am:
+
+install-data-am: install-pkgconfigDATA
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-data-hook
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-binSCRIPTS
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
maintainer-clean: maintainer-clean-recursive
- -rm -f config.status
-
-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
-install-man1 uninstall-man1 install-man uninstall-man \
-install-data-recursive uninstall-data-recursive install-exec-recursive \
-uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
-all-recursive check-recursive installcheck-recursive info-recursive \
-dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs-am \
-installdirs mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binSCRIPTS uninstall-pkgconfigDATA
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) uninstall-hook
+.MAKE: $(am__recursive_targets) install-am install-data-am \
+ install-strip uninstall-am
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+ am--refresh check check-am clean clean-cscope clean-generic \
+ clean-libtool cscope cscopelist-am ctags ctags-am dist \
+ dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
+ dist-tarZ dist-xz dist-zip distcheck distclean \
+ distclean-generic distclean-libtool distclean-tags \
+ distcleancheck distdir distuninstallcheck dvi dvi-am html \
+ html-am info info-am install install-am install-binSCRIPTS \
+ install-data install-data-am install-data-hook install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-pdf install-pdf-am install-pkgconfigDATA install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+ uninstall-am uninstall-binSCRIPTS uninstall-hook \
+ uninstall-pkgconfigDATA
+
+.PRECIOUS: Makefile
+
+
+# List of files required to generate VC IDE .dsp, .vcproj and .vcxproj files
+
+dist-hook:
+ rm -rf $(top_builddir)/tests/log
+ find $(distdir) -name "*.dist" -exec rm {} \;
+ (distit=`find $(srcdir) -name "*.dist" | grep -v ./ares/`; \
+ for file in $$distit; do \
+ strip=`echo $$file | sed -e s/^$(srcdir)// -e s/\.dist//`; \
+ cp -p $$file $(distdir)$$strip; \
+ done)
+
+html:
+ cd docs && $(MAKE) html
+
+pdf:
+ cd docs && $(MAKE) pdf
+
+check: test examples check-docs
+
+@CROSSCOMPILING_TRUE@test-full: test
+@CROSSCOMPILING_TRUE@test-torture: test
+
+@CROSSCOMPILING_TRUE@test:
+@CROSSCOMPILING_TRUE@ @echo "NOTICE: we can't run the tests when cross-compiling!"
+
+@CROSSCOMPILING_FALSE@test:
+@CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all quiet-test)
+
+@CROSSCOMPILING_FALSE@test-full:
+@CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all full-test)
+
+@CROSSCOMPILING_FALSE@test-nonflaky:
+@CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all nonflaky-test)
+
+@CROSSCOMPILING_FALSE@test-torture:
+@CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all torture-test)
+
+@CROSSCOMPILING_FALSE@test-event:
+@CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all event-test)
+
+@CROSSCOMPILING_FALSE@test-am:
+@CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all am-test)
+
+examples:
+ @(cd docs/examples; $(MAKE) check)
+
+check-docs:
+ @(cd docs/libcurl; $(MAKE) check)
+
+# Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros
+# must contain the following line:
+# %_topdir /home/loic/local/rpm
+# and that /home/loic/local/rpm contains the directory SOURCES, BUILD etc.
+#
+# cd /home/loic/local/rpm ; mkdir -p SOURCES BUILD RPMS/i386 SPECS SRPMS
+#
+# If additional configure flags are needed to build the package, add the
+# following in ~/.rpmmacros
+# %configure CFLAGS="%{optflags}" ./configure %{_target_platform} --prefix=%{_prefix} ${AM_CONFIGFLAGS}
+# and run make rpm in the following way:
+# AM_CONFIGFLAGS='--with-uri=/home/users/loic/local/RedHat-6.2' make rpm
+#
+
+rpms:
+ $(MAKE) RPMDIST=curl rpm
+ $(MAKE) RPMDIST=curl-ssl rpm
+
+rpm:
+ RPM_TOPDIR=`rpm --showrc | $(PERL) -n -e 'print if(s/.*_topdir\s+(.*)/$$1/)'` ; \
+ cp $(srcdir)/packages/Linux/RPM/$(RPMDIST).spec $$RPM_TOPDIR/SPECS ; \
+ cp $(PACKAGE)-$(VERSION).tar.gz $$RPM_TOPDIR/SOURCES ; \
+ rpm -ba --clean --rmsource $$RPM_TOPDIR/SPECS/$(RPMDIST).spec ; \
+ mv $$RPM_TOPDIR/RPMS/i386/$(RPMDIST)-*.rpm . ; \
+ mv $$RPM_TOPDIR/SRPMS/$(RPMDIST)-*.src.rpm .
+
+#
+# Build a Solaris pkgadd format file
+# run 'make pkgadd' once you've done './configure' and 'make' to make a Solaris pkgadd format
+# file (which ends up back in this directory).
+# The pkgadd file is in 'pkgtrans' format, so to install on Solaris, do
+# pkgadd -d ./HAXXcurl-*
+#
+
+# gak - libtool requires an absolute directory, hence the pwd below...
+pkgadd:
+ umask 022 ; \
+ $(MAKE) install DESTDIR=`/bin/pwd`/packages/Solaris/root ; \
+ cat COPYING > $(srcdir)/packages/Solaris/copyright ; \
+ cd $(srcdir)/packages/Solaris && $(MAKE) package
+
+#
+# Build a cygwin binary tarball installation file
+# resulting .tar.bz2 file will end up at packages/Win32/cygwin
+cygwinbin:
+ $(MAKE) -C packages/Win32/cygwin cygwinbin
+
+# We extend the standard install with a custom hook:
+install-data-hook:
+ cd include && $(MAKE) install
+ cd docs && $(MAKE) install
+ cd docs/libcurl && $(MAKE) install
+
+# We extend the standard uninstall with a custom hook:
+uninstall-hook:
+ cd include && $(MAKE) uninstall
+ cd docs && $(MAKE) uninstall
+ cd docs/libcurl && $(MAKE) uninstall
+
+ca-bundle: lib/mk-ca-bundle.pl
+ @echo "generating a fresh ca-bundle.crt"
+ @perl $< -b -l -u lib/ca-bundle.crt
+
+ca-firefox: lib/firefox-db2pem.sh
+ @echo "generating a fresh ca-bundle.crt"
+ ./lib/firefox-db2pem.sh lib/ca-bundle.crt
+
+checksrc:
+ cd lib && $(MAKE) checksrc
+ cd src && $(MAKE) checksrc
+ cd tests && $(MAKE) checksrc
+ cd include/curl && $(MAKE) checksrc
+ cd docs/examples && $(MAKE) checksrc
+
+.PHONY: vc-ide
+vc-ide: $(VC6_LIBDSP_DEPS) $(VC6_SRCDSP_DEPS) $(VC7_LIBVCPROJ_DEPS) \
+ $(VC7_SRCVCPROJ_DEPS) $(VC71_LIBVCPROJ_DEPS) $(VC71_SRCVCPROJ_DEPS) \
+ $(VC8_LIBVCPROJ_DEPS) $(VC8_SRCVCPROJ_DEPS) $(VC9_LIBVCPROJ_DEPS) \
+ $(VC9_SRCVCPROJ_DEPS) $(VC10_LIBVCXPROJ_DEPS) $(VC10_SRCVCXPROJ_DEPS) \
+ $(VC11_LIBVCXPROJ_DEPS) $(VC11_SRCVCXPROJ_DEPS) $(VC12_LIBVCXPROJ_DEPS) \
+ $(VC12_SRCVCXPROJ_DEPS) $(VC14_LIBVCXPROJ_DEPS) $(VC14_SRCVCXPROJ_DEPS) \
+ $(VC15_LIBVCXPROJ_DEPS) $(VC15_SRCVCXPROJ_DEPS)
+ @(win32_lib_srcs='$(LIB_CFILES)'; \
+ win32_lib_hdrs='$(LIB_HFILES) config-win32.h'; \
+ win32_lib_rc='$(LIB_RCFILES)'; \
+ win32_lib_vauth_srcs='$(LIB_VAUTH_CFILES)'; \
+ win32_lib_vauth_hdrs='$(LIB_VAUTH_HFILES)'; \
+ win32_lib_vtls_srcs='$(LIB_VTLS_CFILES)'; \
+ win32_lib_vtls_hdrs='$(LIB_VTLS_HFILES)'; \
+ win32_src_srcs='$(CURL_CFILES)'; \
+ win32_src_hdrs='$(CURL_HFILES)'; \
+ win32_src_rc='$(CURL_RCFILES)'; \
+ win32_src_x_srcs='$(CURLX_CFILES)'; \
+ win32_src_x_hdrs='$(CURLX_HFILES) ../lib/config-win32.h'; \
+ \
+ sorted_lib_srcs=`for file in $$win32_lib_srcs; do echo $$file; done | sort`; \
+ sorted_lib_hdrs=`for file in $$win32_lib_hdrs; do echo $$file; done | sort`; \
+ sorted_lib_vauth_srcs=`for file in $$win32_lib_vauth_srcs; do echo $$file; done | sort`; \
+ sorted_lib_vauth_hdrs=`for file in $$win32_lib_vauth_hdrs; do echo $$file; done | sort`; \
+ sorted_lib_vtls_srcs=`for file in $$win32_lib_vtls_srcs; do echo $$file; done | sort`; \
+ sorted_lib_vtls_hdrs=`for file in $$win32_lib_vtls_hdrs; do echo $$file; done | sort`; \
+ sorted_src_srcs=`for file in $$win32_src_srcs; do echo $$file; done | sort`; \
+ sorted_src_hdrs=`for file in $$win32_src_hdrs; do echo $$file; done | sort`; \
+ sorted_src_x_srcs=`for file in $$win32_src_x_srcs; do echo $$file; done | sort`; \
+ sorted_src_x_hdrs=`for file in $$win32_src_x_hdrs; do echo $$file; done | sort`; \
+ \
+ awk_code='\
+function gen_element(type, dir, file)\
+{\
+ sub(/vauth\//, "", file);\
+ sub(/vtls\//, "", file);\
+\
+ spaces=" ";\
+ if(dir == "lib\\vauth" || dir == "lib\\vtls")\
+ tabs=" ";\
+ else\
+ tabs=" ";\
+\
+ if(type == "dsp") {\
+ printf("# Begin Source File\r\n");\
+ printf("\r\n");\
+ printf("SOURCE=..\\..\\..\\..\\%s\\%s\r\n", dir, file);\
+ printf("# End Source File\r\n");\
+ }\
+ else if(type == "vcproj1") {\
+ printf("%s<File\r\n", tabs);\
+ printf("%s RelativePath=\"..\\..\\..\\..\\%s\\%s\">\r\n",\
+ tabs, dir, file);\
+ printf("%s</File>\r\n", tabs);\
+ }\
+ else if(type == "vcproj2") {\
+ printf("%s<File\r\n", tabs);\
+ printf("%s RelativePath=\"..\\..\\..\\..\\%s\\%s\"\r\n",\
+ tabs, dir, file);\
+ printf("%s>\r\n", tabs);\
+ printf("%s</File>\r\n", tabs);\
+ }\
+ else if(type == "vcxproj") {\
+ i = index(file, ".");\
+ ext = substr(file, i == 0 ? 0 : i + 1);\
+\
+ if(ext == "c")\
+ printf("%s<ClCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
+ spaces, dir, file);\
+ else if(ext == "h")\
+ printf("%s<ClInclude Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
+ spaces, dir, file);\
+ else if(ext == "rc")\
+ printf("%s<ResourceCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
+ spaces, dir, file);\
+ }\
+}\
+\
+{\
+\
+ if($$0 == "CURL_LIB_C_FILES") {\
+ split(lib_srcs, arr);\
+ for(val in arr) gen_element(proj_type, "lib", arr[val]);\
+ }\
+ else if($$0 == "CURL_LIB_H_FILES") {\
+ split(lib_hdrs, arr);\
+ for(val in arr) gen_element(proj_type, "lib", arr[val]);\
+ }\
+ else if($$0 == "CURL_LIB_RC_FILES") {\
+ split(lib_rc, arr);\
+ for(val in arr) gen_element(proj_type, "lib", arr[val]);\
+ }\
+ else if($$0 == "CURL_LIB_VAUTH_C_FILES") {\
+ split(lib_vauth_srcs, arr);\
+ for(val in arr) gen_element(proj_type, "lib\\vauth", arr[val]);\
+ }\
+ else if($$0 == "CURL_LIB_VAUTH_H_FILES") {\
+ split(lib_vauth_hdrs, arr);\
+ for(val in arr) gen_element(proj_type, "lib\\vauth", arr[val]);\
+ }\
+ else if($$0 == "CURL_LIB_VTLS_C_FILES") {\
+ split(lib_vtls_srcs, arr);\
+ for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\
+ }\
+ else if($$0 == "CURL_LIB_VTLS_H_FILES") {\
+ split(lib_vtls_hdrs, arr);\
+ for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\
+ }\
+ else if($$0 == "CURL_SRC_C_FILES") {\
+ split(src_srcs, arr);\
+ for(val in arr) gen_element(proj_type, "src", arr[val]);\
+ }\
+ else if($$0 == "CURL_SRC_H_FILES") {\
+ split(src_hdrs, arr);\
+ for(val in arr) gen_element(proj_type, "src", arr[val]);\
+ }\
+ else if($$0 == "CURL_SRC_RC_FILES") {\
+ split(src_rc, arr);\
+ for(val in arr) gen_element(proj_type, "src", arr[val]);\
+ }\
+ else if($$0 == "CURL_SRC_X_C_FILES") {\
+ split(src_x_srcs, arr);\
+ for(val in arr) {\
+ sub(/..\/lib\//, "", arr[val]);\
+ gen_element(proj_type, "lib", arr[val]);\
+ }\
+ }\
+ else if($$0 == "CURL_SRC_X_H_FILES") {\
+ split(src_x_hdrs, arr);\
+ for(val in arr) {\
+ sub(/..\/lib\//, "", arr[val]);\
+ gen_element(proj_type, "lib", arr[val]);\
+ }\
+ }\
+ else\
+ printf("%s\r\n", $$0);\
+}';\
+ \
+ echo "generating '$(VC6_LIBDSP)'"; \
+ awk -v proj_type=dsp \
+ -v lib_srcs="$$sorted_lib_srcs" \
+ -v lib_hdrs="$$sorted_lib_hdrs" \
+ -v lib_rc="$$win32_lib_rc" \
+ -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
+ -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
+ -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
+ -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC6_LIBTMPL) > $(VC6_LIBDSP) || { exit 1; }; \
+ \
+ echo "generating '$(VC6_SRCDSP)'"; \
+ awk -v proj_type=dsp \
+ -v src_srcs="$$sorted_src_srcs" \
+ -v src_hdrs="$$sorted_src_hdrs" \
+ -v src_rc="$$win32_src_rc" \
+ -v src_x_srcs="$$sorted_src_x_srcs" \
+ -v src_x_hdrs="$$sorted_src_x_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC6_SRCTMPL) > $(VC6_SRCDSP) || { exit 1; }; \
+ \
+ echo "generating '$(VC7_LIBVCPROJ)'"; \
+ awk -v proj_type=vcproj1 \
+ -v lib_srcs="$$sorted_lib_srcs" \
+ -v lib_hdrs="$$sorted_lib_hdrs" \
+ -v lib_rc="$$win32_lib_rc" \
+ -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
+ -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
+ -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
+ -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC7_LIBTMPL) > $(VC7_LIBVCPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC7_SRCVCPROJ)'"; \
+ awk -v proj_type=vcproj1 \
+ -v src_srcs="$$sorted_src_srcs" \
+ -v src_hdrs="$$sorted_src_hdrs" \
+ -v src_rc="$$win32_src_rc" \
+ -v src_x_srcs="$$sorted_src_x_srcs" \
+ -v src_x_hdrs="$$sorted_src_x_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC7_SRCTMPL) > $(VC7_SRCVCPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC71_LIBVCPROJ)'"; \
+ awk -v proj_type=vcproj1 \
+ -v lib_srcs="$$sorted_lib_srcs" \
+ -v lib_hdrs="$$sorted_lib_hdrs" \
+ -v lib_rc="$$win32_lib_rc" \
+ -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
+ -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
+ -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
+ -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC71_LIBTMPL) > $(VC71_LIBVCPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC71_SRCVCPROJ)'"; \
+ awk -v proj_type=vcproj1 \
+ -v src_srcs="$$sorted_src_srcs" \
+ -v src_hdrs="$$sorted_src_hdrs" \
+ -v src_rc="$$win32_src_rc" \
+ -v src_x_srcs="$$sorted_src_x_srcs" \
+ -v src_x_hdrs="$$sorted_src_x_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC71_SRCTMPL) > $(VC71_SRCVCPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC8_LIBVCPROJ)'"; \
+ awk -v proj_type=vcproj2 \
+ -v lib_srcs="$$sorted_lib_srcs" \
+ -v lib_hdrs="$$sorted_lib_hdrs" \
+ -v lib_rc="$$win32_lib_rc" \
+ -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
+ -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
+ -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
+ -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC8_LIBTMPL) > $(VC8_LIBVCPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC8_SRCVCPROJ)'"; \
+ awk -v proj_type=vcproj2 \
+ -v src_srcs="$$sorted_src_srcs" \
+ -v src_hdrs="$$sorted_src_hdrs" \
+ -v src_rc="$$win32_src_rc" \
+ -v src_x_srcs="$$sorted_src_x_srcs" \
+ -v src_x_hdrs="$$sorted_src_x_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC8_SRCTMPL) > $(VC8_SRCVCPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC9_LIBVCPROJ)'"; \
+ awk -v proj_type=vcproj2 \
+ -v lib_srcs="$$sorted_lib_srcs" \
+ -v lib_hdrs="$$sorted_lib_hdrs" \
+ -v lib_rc="$$win32_lib_rc" \
+ -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
+ -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
+ -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
+ -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC9_LIBTMPL) > $(VC9_LIBVCPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC9_SRCVCPROJ)'"; \
+ awk -v proj_type=vcproj2 \
+ -v src_srcs="$$sorted_src_srcs" \
+ -v src_hdrs="$$sorted_src_hdrs" \
+ -v src_rc="$$win32_src_rc" \
+ -v src_x_srcs="$$sorted_src_x_srcs" \
+ -v src_x_hdrs="$$sorted_src_x_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC9_SRCTMPL) > $(VC9_SRCVCPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC10_LIBVCXPROJ)'"; \
+ awk -v proj_type=vcxproj \
+ -v lib_srcs="$$sorted_lib_srcs" \
+ -v lib_hdrs="$$sorted_lib_hdrs" \
+ -v lib_rc="$$win32_lib_rc" \
+ -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
+ -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
+ -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
+ -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC10_LIBTMPL) > $(VC10_LIBVCXPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC10_SRCVCXPROJ)'"; \
+ awk -v proj_type=vcxproj \
+ -v src_srcs="$$sorted_src_srcs" \
+ -v src_hdrs="$$sorted_src_hdrs" \
+ -v src_rc="$$win32_src_rc" \
+ -v src_x_srcs="$$sorted_src_x_srcs" \
+ -v src_x_hdrs="$$sorted_src_x_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC10_SRCTMPL) > $(VC10_SRCVCXPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC11_LIBVCXPROJ)'"; \
+ awk -v proj_type=vcxproj \
+ -v lib_srcs="$$sorted_lib_srcs" \
+ -v lib_hdrs="$$sorted_lib_hdrs" \
+ -v lib_rc="$$win32_lib_rc" \
+ -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
+ -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
+ -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
+ -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC11_LIBTMPL) > $(VC11_LIBVCXPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC11_SRCVCXPROJ)'"; \
+ awk -v proj_type=vcxproj \
+ -v src_srcs="$$sorted_src_srcs" \
+ -v src_hdrs="$$sorted_src_hdrs" \
+ -v src_rc="$$win32_src_rc" \
+ -v src_x_srcs="$$sorted_src_x_srcs" \
+ -v src_x_hdrs="$$sorted_src_x_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC11_SRCTMPL) > $(VC11_SRCVCXPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC12_LIBVCXPROJ)'"; \
+ awk -v proj_type=vcxproj \
+ -v lib_srcs="$$sorted_lib_srcs" \
+ -v lib_hdrs="$$sorted_lib_hdrs" \
+ -v lib_rc="$$win32_lib_rc" \
+ -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
+ -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
+ -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
+ -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC12_LIBTMPL) > $(VC12_LIBVCXPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC12_SRCVCXPROJ)'"; \
+ awk -v proj_type=vcxproj \
+ -v src_srcs="$$sorted_src_srcs" \
+ -v src_hdrs="$$sorted_src_hdrs" \
+ -v src_rc="$$win32_src_rc" \
+ -v src_x_srcs="$$sorted_src_x_srcs" \
+ -v src_x_hdrs="$$sorted_src_x_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC12_SRCTMPL) > $(VC12_SRCVCXPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC14_LIBVCXPROJ)'"; \
+ awk -v proj_type=vcxproj \
+ -v lib_srcs="$$sorted_lib_srcs" \
+ -v lib_hdrs="$$sorted_lib_hdrs" \
+ -v lib_rc="$$win32_lib_rc" \
+ -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
+ -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
+ -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
+ -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC14_LIBTMPL) > $(VC14_LIBVCXPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC14_SRCVCXPROJ)'"; \
+ awk -v proj_type=vcxproj \
+ -v src_srcs="$$sorted_src_srcs" \
+ -v src_hdrs="$$sorted_src_hdrs" \
+ -v src_rc="$$win32_src_rc" \
+ -v src_x_srcs="$$sorted_src_x_srcs" \
+ -v src_x_hdrs="$$sorted_src_x_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC14_SRCTMPL) > $(VC14_SRCVCXPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC15_LIBVCXPROJ)'"; \
+ awk -v proj_type=vcxproj \
+ -v lib_srcs="$$sorted_lib_srcs" \
+ -v lib_hdrs="$$sorted_lib_hdrs" \
+ -v lib_rc="$$win32_lib_rc" \
+ -v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
+ -v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
+ -v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
+ -v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC15_LIBTMPL) > $(VC15_LIBVCXPROJ) || { exit 1; }; \
+ \
+ echo "generating '$(VC15_SRCVCXPROJ)'"; \
+ awk -v proj_type=vcxproj \
+ -v src_srcs="$$sorted_src_srcs" \
+ -v src_hdrs="$$sorted_src_hdrs" \
+ -v src_rc="$$win32_src_rc" \
+ -v src_x_srcs="$$sorted_src_x_srcs" \
+ -v src_x_hdrs="$$sorted_src_x_hdrs" \
+ "$$awk_code" $(srcdir)/$(VC15_SRCTMPL) > $(VC15_SRCVCXPROJ) || { exit 1; };)
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
projects / platform / upstream / curl.git / blobdiff