-# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# Makefile.in generated by automake 1.13.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2012 Free Software Foundation, Inc.
build_triplet = @build@
host_triplet = @host@
subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(top_srcdir)/build-aux/compile \
+DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
+ $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+ $(top_srcdir)/configure $(am__configure_deps) \
+ $(top_srcdir)/build-aux/javacomp.sh.in \
+ $(top_srcdir)/build-aux/javaexec.sh.in ABOUT-NLS COPYING \
+ THANKS TODO $(top_srcdir)/build-aux/compile \
$(top_srcdir)/build-aux/config.guess \
$(top_srcdir)/build-aux/config.rpath \
$(top_srcdir)/build-aux/config.sub \
$(top_srcdir)/build-aux/install-sh \
- $(top_srcdir)/build-aux/javacomp.sh.in \
- $(top_srcdir)/build-aux/javaexec.sh.in \
- $(top_srcdir)/build-aux/missing $(top_srcdir)/configure \
- ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README-alpha \
- THANKS TODO
+ $(top_srcdir)/build-aux/missing
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \
$(top_srcdir)/m4/alloca.m4 $(top_srcdir)/m4/asm-underscore.m4 \
$(top_srcdir)/m4/error.m4 $(top_srcdir)/m4/exponentd.m4 \
$(top_srcdir)/m4/exponentf.m4 $(top_srcdir)/m4/exponentl.m4 \
$(top_srcdir)/m4/extensions.m4 \
+ $(top_srcdir)/m4/extern-inline.m4 \
$(top_srcdir)/m4/fatal-signal.m4 $(top_srcdir)/m4/fcntl-o.m4 \
$(top_srcdir)/m4/fcntl.m4 $(top_srcdir)/m4/fcntl_h.m4 \
$(top_srcdir)/m4/flex.m4 $(top_srcdir)/m4/float_h.m4 \
$(top_srcdir)/m4/fpieee.m4 $(top_srcdir)/m4/fprintf-posix.m4 \
$(top_srcdir)/m4/frexp.m4 $(top_srcdir)/m4/frexpl.m4 \
$(top_srcdir)/m4/fseterr.m4 $(top_srcdir)/m4/fstat.m4 \
- $(top_srcdir)/m4/getdtablesize.m4 $(top_srcdir)/m4/getopt.m4 \
+ $(top_srcdir)/m4/getdelim.m4 $(top_srcdir)/m4/getdtablesize.m4 \
+ $(top_srcdir)/m4/getline.m4 $(top_srcdir)/m4/getopt.m4 \
$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \
$(top_srcdir)/m4/gnulib-common.m4 \
$(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/iconv.m4 \
- $(top_srcdir)/m4/include_next.m4 $(top_srcdir)/m4/inline.m4 \
+ $(top_srcdir)/m4/include_next.m4 \
$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/intmax_t.m4 \
$(top_srcdir)/m4/inttypes-pri.m4 $(top_srcdir)/m4/inttypes.m4 \
$(top_srcdir)/m4/inttypes_h.m4 $(top_srcdir)/m4/isnan.m4 \
am__v_at_1 =
SOURCES =
DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-dvi-recursive install-exec-recursive \
- install-html-recursive install-info-recursive \
- install-pdf-recursive install-ps-recursive install-recursive \
- installcheck-recursive installdirs-recursive pdf-recursive \
- ps-recursive uninstall-recursive
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+ ctags-recursive dvi-recursive html-recursive info-recursive \
+ install-data-recursive install-dvi-recursive \
+ install-exec-recursive install-html-recursive \
+ install-info-recursive install-pdf-recursive \
+ install-ps-recursive install-recursive installcheck-recursive \
+ installdirs-recursive pdf-recursive ps-recursive \
+ tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
DATA = $(aclocal_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
- $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+am__recursive_targets = \
+ $(RECURSIVE_TARGETS) \
+ $(RECURSIVE_CLEAN_TARGETS) \
+ $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BISON_CXX_WORKS = @BISON_CXX_WORKS@
+BISON_C_WORKS = @BISON_C_WORKS@
BISON_LOCALEDIR = @BISON_LOCALEDIR@
BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
CXX = @CXX@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
+CXX_COMPILER_POSIXLY_CORRECT = @CXX_COMPILER_POSIXLY_CORRECT@
CYGPATH_W = @CYGPATH_W@
+C_COMPILER_POSIXLY_CORRECT = @C_COMPILER_POSIXLY_CORRECT@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
+DOT = @DOT@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
GNULIB_ROUNDL = @GNULIB_ROUNDL@
GNULIB_RPMATCH = @GNULIB_RPMATCH@
GNULIB_SCANF = @GNULIB_SCANF@
+GNULIB_SECURE_GETENV = @GNULIB_SECURE_GETENV@
GNULIB_SETENV = @GNULIB_SETENV@
GNULIB_SETHOSTNAME = @GNULIB_SETHOSTNAME@
GNULIB_SIGACTION = @GNULIB_SIGACTION@
HAVE_RPMATCH = @HAVE_RPMATCH@
HAVE_SAME_LONG_DOUBLE_AS_DOUBLE = @HAVE_SAME_LONG_DOUBLE_AS_DOUBLE@
HAVE_SCHED_H = @HAVE_SCHED_H@
+HAVE_SECURE_GETENV = @HAVE_SECURE_GETENV@
HAVE_SETENV = @HAVE_SETENV@
HAVE_SETHOSTNAME = @HAVE_SETHOSTNAME@
HAVE_SIGACTION = @HAVE_SIGACTION@
NEXT_UNISTD_H = @NEXT_UNISTD_H@
NEXT_WCHAR_H = @NEXT_WCHAR_H@
NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
+NO_STRICT_ALIAS_CXXFLAGS = @NO_STRICT_ALIAS_CXXFLAGS@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
POSUB = @POSUB@
PRAGMA_COLUMNS = @PRAGMA_COLUMNS@
PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
REPLACE_PREAD = @REPLACE_PREAD@
REPLACE_PRINTF = @REPLACE_PRINTF@
REPLACE_PTHREAD_SIGMASK = @REPLACE_PTHREAD_SIGMASK@
+REPLACE_PTSNAME = @REPLACE_PTSNAME@
REPLACE_PTSNAME_R = @REPLACE_PTSNAME_R@
REPLACE_PUTENV = @REPLACE_PUTENV@
REPLACE_PWRITE = @REPLACE_PWRITE@
WARN_CFLAGS_TEST = @WARN_CFLAGS_TEST@
WARN_CXXFLAGS = @WARN_CXXFLAGS@
WARN_CXXFLAGS_TEST = @WARN_CXXFLAGS_TEST@
+WARN_NO_NULL_CONVERSION_CXXFLAGS = @WARN_NO_NULL_CONVERSION_CXXFLAGS@
WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
WERROR_CFLAGS = @WERROR_CFLAGS@
WERROR_CXXFLAGS = @WERROR_CXXFLAGS@
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --gnits'; \
- $(am__cd) $(srcdir) && $(AUTOMAKE) --gnits \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits Makefile'; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
$(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnits Makefile
+ $(AUTOMAKE) --gnu Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
+$(am__recursive_targets):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-cscopelist-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
- done
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ $(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$$unique; \
fi; \
fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
-
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-
clean-cscope:
-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
-cscope.files: clean-cscope cscopelist-recursive cscopelist
-
-cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS) $(LISP)'; \
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
- @case `sed 15q $(srcdir)/NEWS` in \
- *"$(VERSION)"*) : ;; \
- *) \
- echo "NEWS not updated; not releasing" 1>&2; \
- exit 1;; \
- esac
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
*.zip*) \
unzip $(distdir).zip ;;\
esac
- chmod -R a-w $(distdir); chmod u+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
+ chmod -R a-w $(distdir)
+ chmod u+w $(distdir)
+ mkdir $(distdir)/_build $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
uninstall-am: uninstall-aclocalDATA
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
- cscopelist-recursive ctags-recursive install install-am \
- install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
- all all-am am--refresh check check-am clean clean-cscope \
- clean-generic cscope cscopelist cscopelist-recursive ctags \
- ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-hook \
- dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \
- distclean distclean-generic distclean-tags distcleancheck \
- distdir distuninstallcheck dvi dvi-am html html-am info \
- info-am install install-aclocalDATA install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am tags tags-recursive uninstall \
+.MAKE: $(am__recursive_targets) all check install install-am \
+ install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+ am--refresh check check-am clean clean-cscope clean-generic \
+ cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
+ dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
+ dist-zip distcheck distclean distclean-generic distclean-tags \
+ distcleancheck distdir distuninstallcheck dvi dvi-am html \
+ html-am info info-am install install-aclocalDATA install-am \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs installdirs-am \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-aclocalDATA uninstall-am
.PHONY: $(MAINTAINER_CHECKS)
.PHONY: update-b4-copyright update-package-copyright-year
update-b4-copyright:
- $(AM_V_GEN) find data -type f \
- | grep -v -E '^data/bison.m4$$' \
- | xargs $(build_aux)/$@
+ $(AM_V_GEN)find $(srcdir)/data -type f \
+ | xargs $(srcdir)/build-aux/$@
@echo 'warning: src/parse-gram.[hc] may need to be regenerated.'
update-package-copyright-year:
- $(AM_V_GEN)$(build_aux)/$@ configure.ac
+ $(AM_V_GEN)$(srcdir)/build-aux/$@ $(srcdir)/configure.ac
.PHONY: gen-ChangeLog
gen-ChangeLog:
$(AM_V_GEN)if test -d $(srcdir)/.git; then \