From a918df21f09739e4d0f91937b88f3804696a0f41 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 28 Oct 2022 20:27:04 -0400 Subject: [PATCH] Convert CONFIG_SYS_MAX_NAND_DEVICE to Kconfig This converts the following to Kconfig: CONFIG_SYS_MAX_NAND_DEVICE Signed-off-by: Tom Rini Reviewed-by: Simon Glass --- configs/CHIP_pro_defconfig | 1 + configs/Nintendo_NES_Classic_Edition_defconfig | 1 + configs/etamin_defconfig | 1 + doc/README.nand | 3 --- drivers/mtd/nand/raw/Kconfig | 4 ++++ include/configs/M5329EVB.h | 1 - include/configs/M5373EVB.h | 1 - include/configs/MCR3000.h | 1 - include/configs/P1010RDB.h | 1 - include/configs/P2041RDB.h | 1 - include/configs/T102xRDB.h | 1 - include/configs/T104xRDB.h | 1 - include/configs/T208xQDS.h | 1 - include/configs/T208xRDB.h | 1 - include/configs/T4240RDB.h | 1 - include/configs/at91sam9260ek.h | 1 - include/configs/at91sam9261ek.h | 1 - include/configs/at91sam9263ek.h | 1 - include/configs/at91sam9m10g45ek.h | 1 - include/configs/at91sam9n12ek.h | 1 - include/configs/at91sam9rlek.h | 1 - include/configs/at91sam9x5ek.h | 1 - include/configs/bcm963158.h | 4 ---- include/configs/bcm96855.h | 4 ---- include/configs/bcm96856.h | 4 ---- include/configs/bcm96858.h | 4 ---- include/configs/bk4r1.h | 1 - include/configs/broadcom_bcm968380gerg.h | 3 --- include/configs/cm_fx6.h | 1 - include/configs/colibri-imx6ull.h | 1 - include/configs/colibri_imx7.h | 1 - include/configs/colibri_t20.h | 1 - include/configs/colibri_vf.h | 1 - include/configs/comtrend_vr3032u.h | 3 --- include/configs/corvus.h | 1 - include/configs/da850evm.h | 1 - include/configs/devkit3250.h | 1 - include/configs/etamin.h | 2 -- include/configs/ethernut5.h | 1 - include/configs/gardena-smart-gateway-at91sam.h | 1 - include/configs/gw_ventana.h | 1 - include/configs/harmony.h | 1 - include/configs/imx27lite-common.h | 1 - include/configs/imx6-engicam.h | 1 - include/configs/imx6_logic.h | 1 - include/configs/imx6ulz_smm_m2.h | 1 - include/configs/imx8mn_bsh_smm_s2.h | 1 - include/configs/imx8mp_rsb3720.h | 1 - include/configs/km/km-mpc83xx.h | 1 - include/configs/km/pg-wcom-ls102xa.h | 1 - include/configs/kmcent2.h | 1 - include/configs/kmcoge5ne.h | 1 - include/configs/ls1021aqds.h | 1 - include/configs/ls1043aqds.h | 1 - include/configs/ls1043ardb.h | 1 - include/configs/ls1046afrwy.h | 1 - include/configs/ls1046aqds.h | 1 - include/configs/ls1046ardb.h | 1 - include/configs/ls1088aqds.h | 1 - include/configs/ls1088ardb.h | 1 - include/configs/ls2080aqds.h | 1 - include/configs/ls2080ardb.h | 1 - include/configs/m53menlo.h | 1 - include/configs/medcom-wide.h | 1 - include/configs/meesc.h | 1 - include/configs/mt7621.h | 1 - include/configs/mv-common.h | 3 --- include/configs/mvebu_armada-8k.h | 2 -- include/configs/mx6sabreauto.h | 1 - include/configs/mx6sxsabreauto.h | 1 - include/configs/mx7dsabresd.h | 1 - include/configs/mxs.h | 1 - include/configs/mys_6ulx.h | 1 - include/configs/npi_imx6ull.h | 1 - include/configs/octeontx_common.h | 4 ---- include/configs/omap3_beagle.h | 1 - include/configs/omap3_evm.h | 1 - include/configs/omap3_logic.h | 1 - include/configs/omapl138_lcdk.h | 1 - include/configs/p1_p2_rdb_pc.h | 1 - include/configs/pcl063.h | 1 - include/configs/pcl063_ull.h | 1 - include/configs/pcm052.h | 2 -- include/configs/pcm058.h | 1 - include/configs/plutux.h | 1 - include/configs/pm9261.h | 1 - include/configs/pm9263.h | 1 - include/configs/pm9g45.h | 1 - include/configs/presidio_asic.h | 1 - include/configs/sam9x60ek.h | 1 - include/configs/sama5d2_ptc_ek.h | 1 - include/configs/sama5d3_xplained.h | 1 - include/configs/sama5d3xek.h | 1 - include/configs/sama5d4_xplained.h | 1 - include/configs/sama5d4ek.h | 1 - include/configs/seaboard.h | 1 - include/configs/siemens-am33x-common.h | 2 -- include/configs/smartweb.h | 1 - include/configs/snapper9g45.h | 1 - include/configs/socfpga_common.h | 1 - include/configs/socrates.h | 1 - include/configs/stm32mp13_common.h | 1 - include/configs/stm32mp15_common.h | 1 - include/configs/sunxi-common.h | 1 - include/configs/taurus.h | 1 - include/configs/tec.h | 1 - include/configs/ti816x_evm.h | 1 - include/configs/ti_armv7_keystone2.h | 1 - include/configs/ti_armv7_omap.h | 1 - include/configs/uniphier.h | 1 - include/configs/usb_a9263.h | 1 - include/configs/vf610twr.h | 1 - include/configs/work_92105.h | 1 - include/configs/x530.h | 1 - include/configs/xilinx_zynqmp.h | 4 ---- include/configs/zynq-common.h | 4 ---- 116 files changed, 7 insertions(+), 145 deletions(-) diff --git a/configs/CHIP_pro_defconfig b/configs/CHIP_pro_defconfig index 2917960..5a12fbb 100644 --- a/configs/CHIP_pro_defconfig +++ b/configs/CHIP_pro_defconfig @@ -19,6 +19,7 @@ CONFIG_SYS_I2C_SPEED=400000 # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y +CONFIG_SYS_MAX_NAND_DEVICE=8 CONFIG_SYS_NAND_BLOCK_SIZE=0x40000 CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SYS_NAND_PAGE_SIZE=0x1000 diff --git a/configs/Nintendo_NES_Classic_Edition_defconfig b/configs/Nintendo_NES_Classic_Edition_defconfig index b660234..89fb441 100644 --- a/configs/Nintendo_NES_Classic_Edition_defconfig +++ b/configs/Nintendo_NES_Classic_Edition_defconfig @@ -14,6 +14,7 @@ CONFIG_CMD_MTDPARTS=y # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y +CONFIG_SYS_MAX_NAND_DEVICE=8 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000 CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_SYS_NAND_PAGE_SIZE=0x800 diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig index 7bc3ac2..ee731f3 100644 --- a/configs/etamin_defconfig +++ b/configs/etamin_defconfig @@ -98,6 +98,7 @@ CONFIG_MMC_OMAP_HS=y CONFIG_MTD=y CONFIG_MTD_CONCAT=y CONFIG_MTD_RAW_NAND=y +CONFIG_SYS_MAX_NAND_DEVICE=3 CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y CONFIG_SYS_NAND_BLOCK_SIZE=0x80000 CONFIG_SYS_NAND_ONFI_DETECTION=y diff --git a/doc/README.nand b/doc/README.nand index ffcea90..d1ce307 100644 --- a/doc/README.nand +++ b/doc/README.nand @@ -99,9 +99,6 @@ Configuration Options: CONFIG_CMD_NAND_TORTURE Enables the torture command (see description of this command below). - CONFIG_SYS_MAX_NAND_DEVICE - The maximum number of NAND devices you want to support. - CONFIG_SYS_NAND_MAX_ECCPOS If specified, overrides the maximum number of ECC bytes supported. Useful for reducing image size, especially with SPL. diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index d6e3eeb..a7196d5 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -26,6 +26,10 @@ config TPL_SYS_NAND_SELF_INIT config TPL_NAND_INIT bool +config SYS_MAX_NAND_DEVICE + int "Maximum number of NAND devices to support" + default 1 + config SYS_NAND_DRIVER_ECC_LAYOUT bool "Omit standard ECC layouts to save space" help diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index a6c953f..474480c 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -95,7 +95,6 @@ #endif #ifdef CONFIG_CMD_NAND -# define CONFIG_SYS_MAX_NAND_DEVICE 1 # define CONFIG_SYS_NAND_BASE CONFIG_SYS_CS2_BASE # define CONFIG_SYS_NAND_SIZE 1 # define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index f519bef..2e1c857 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -96,7 +96,6 @@ # define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ #endif -# define CONFIG_SYS_MAX_NAND_DEVICE 1 # define CONFIG_SYS_NAND_BASE CONFIG_SYS_CS2_BASE # define CONFIG_SYS_NAND_SIZE 1 # define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } diff --git a/include/configs/MCR3000.h b/include/configs/MCR3000.h index 1c46702..371ae20 100644 --- a/include/configs/MCR3000.h +++ b/include/configs/MCR3000.h @@ -83,7 +83,6 @@ /* Ethernet configuration part */ /* NAND configuration part */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x0C000000 #endif /* __CONFIG_H */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index b87118c..88d9bec 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -202,7 +202,6 @@ extern unsigned long get_sdram_size(void); #endif #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #if defined(CONFIG_TARGET_P1010RDB_PA) /* NAND Flash Timing Params */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 60b0963..317784e 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -119,7 +119,6 @@ #endif #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* NAND flash config */ #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index f6a911c..88700cb 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -236,7 +236,6 @@ #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #if defined(CONFIG_MTD_RAW_NAND) #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index d9ee873..6474b6f 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -212,7 +212,6 @@ #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #if defined(CONFIG_MTD_RAW_NAND) #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 6701eab..10126a8 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -200,7 +200,6 @@ #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #if defined(CONFIG_MTD_RAW_NAND) #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 86c92de..a74225b 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -176,7 +176,6 @@ #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #if defined(CONFIG_MTD_RAW_NAND) #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 1ad8223..42d1095 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -235,7 +235,6 @@ #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #if defined(CONFIG_MTD_RAW_NAND) #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index ca5815f..d51da9d 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -43,7 +43,6 @@ /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 #define CONFIG_SYS_NAND_DBW_8 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 5576a5f..5dc8f21 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -24,7 +24,6 @@ /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 /* our ALE is AD22 */ diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index fb65880..3406373 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -152,7 +152,6 @@ /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 #define CONFIG_SYS_NAND_DBW_8 1 /* our ALE is AD21 */ diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 2d257c4..9a6f80f 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -20,7 +20,6 @@ /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 #define CONFIG_SYS_NAND_DBW_8 /* our ALE is AD21 */ diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index f2ca4f3..862179b 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -21,7 +21,6 @@ /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index bc687fc..c60c248 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -25,7 +25,6 @@ /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 #define CONFIG_SYS_NAND_DBW_8 1 /* our ALE is AD21 */ diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 0e76658..71246ce 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -27,7 +27,6 @@ /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 /* our ALE is AD21 */ diff --git a/include/configs/bcm963158.h b/include/configs/bcm963158.h index f473963..b15c411 100644 --- a/include/configs/bcm963158.h +++ b/include/configs/bcm963158.h @@ -8,8 +8,4 @@ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif /* CONFIG_MTD_RAW_NAND */ - #endif diff --git a/include/configs/bcm96855.h b/include/configs/bcm96855.h index ba2d8a3..6e420f2 100644 --- a/include/configs/bcm96855.h +++ b/include/configs/bcm96855.h @@ -8,8 +8,4 @@ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif /* CONFIG_MTD_RAW_NAND */ - #endif diff --git a/include/configs/bcm96856.h b/include/configs/bcm96856.h index 3050cf3..a7ae71e 100644 --- a/include/configs/bcm96856.h +++ b/include/configs/bcm96856.h @@ -8,8 +8,4 @@ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif /* CONFIG_MTD_RAW_NAND */ - #endif diff --git a/include/configs/bcm96858.h b/include/configs/bcm96858.h index 8bd1169..4e584b4 100644 --- a/include/configs/bcm96858.h +++ b/include/configs/bcm96858.h @@ -8,8 +8,4 @@ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif /* CONFIG_MTD_RAW_NAND */ - #endif diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h index b3e1fdd..ca2bc19 100644 --- a/include/configs/bk4r1.h +++ b/include/configs/bk4r1.h @@ -51,7 +51,6 @@ #include /* NAND support */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define IMX_FEC1_BASE ENET1_BASE_ADDR diff --git a/include/configs/broadcom_bcm968380gerg.h b/include/configs/broadcom_bcm968380gerg.h index c1c1b37..bad1439 100644 --- a/include/configs/broadcom_bcm968380gerg.h +++ b/include/configs/broadcom_bcm968380gerg.h @@ -6,6 +6,3 @@ #include #include -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif /* CONFIG_MTD_RAW_NAND */ diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index cbba726..e5e8c13 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -129,7 +129,6 @@ /* NAND */ #define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* APBH DMA is required for NAND support */ /* Ethernet */ diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h index 321edab..31426b6 100644 --- a/include/configs/colibri-imx6ull.h +++ b/include/configs/colibri-imx6ull.h @@ -122,7 +122,6 @@ #ifdef CONFIG_TARGET_COLIBRI_IMX6ULL_NAND /* NAND stuff */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */ #define CONFIG_SYS_NAND_BASE -1 #endif diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index b8d0dc9..c95b732 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -166,7 +166,6 @@ #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND /* NAND stuff */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES #endif diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h index 73d1844..b758086 100644 --- a/include/configs/colibri_t20.h +++ b/include/configs/colibri_t20.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE /* NAND support */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define UBOOT_UPDATE \ "update_uboot=nand erase.part u-boot && " \ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 268afbb..0f6f99d 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -15,7 +15,6 @@ #include /* NAND support */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_IPADDR 192.168.10.2 #define CONFIG_NETMASK 255.255.255.0 diff --git a/include/configs/comtrend_vr3032u.h b/include/configs/comtrend_vr3032u.h index a46b394..e8b0724 100644 --- a/include/configs/comtrend_vr3032u.h +++ b/include/configs/comtrend_vr3032u.h @@ -6,6 +6,3 @@ #include #include -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif /* CONFIG_MTD_RAW_NAND */ diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 5e43c21..0596afb 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -37,7 +37,6 @@ /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 #define CONFIG_SYS_NAND_DBW_8 /* our ALE is AD21 */ diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 58c9024..3625f92 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -114,7 +114,6 @@ #define CONFIG_SYS_NAND_MASK_CLE 0x10 #define CONFIG_SYS_NAND_MASK_ALE 0x8 #undef CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x40000 #define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000 diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index 66fb25b..e5639fb 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -36,7 +36,6 @@ * NAND controller */ #define CONFIG_SYS_NAND_BASE SLC_NAND_BASE -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } /* diff --git a/include/configs/etamin.h b/include/configs/etamin.h index 7923fbb..75322a3 100644 --- a/include/configs/etamin.h +++ b/include/configs/etamin.h @@ -45,8 +45,6 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 26 -#undef CONFIG_SYS_MAX_NAND_DEVICE -#define CONFIG_SYS_MAX_NAND_DEVICE 3 #define CONFIG_SYS_NAND_BASE2 (0x18000000) /* physical address */ #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ CONFIG_SYS_NAND_BASE2} diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 7a3c800..22647ab 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -37,7 +37,6 @@ /* NAND flash */ #ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 /* our ALE is AD21 */ diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h index 635d0f0..a091ec5 100644 --- a/include/configs/gardena-smart-gateway-at91sam.h +++ b/include/configs/gardena-smart-gateway-at91sam.h @@ -22,7 +22,6 @@ #define CONFIG_SYS_SDRAM_SIZE 0x08000000 /* 128 megs */ /* NAND flash */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 /* our ALE is AD21 */ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index bba64af..714f8d8 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -20,7 +20,6 @@ #define CONFIG_MXC_UART_BASE UART2_BASE /* NAND */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* MMC Configs */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 879bd5c..fe4b02c 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -24,7 +24,6 @@ #endif /* NAND support */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Environment in NAND (which is 512M), aligned to start of last sector */ diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index 6ebdc3d..4042845 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -97,7 +97,6 @@ * NAND */ #define CONFIG_MXC_NAND_REGS_BASE 0xd8000000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0xd8000000 #define CONFIG_MXC_NAND_HWECC diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h index fa73cab..f52367c 100644 --- a/include/configs/imx6-engicam.h +++ b/include/configs/imx6-engicam.h @@ -126,7 +126,6 @@ /* NAND */ #ifdef CONFIG_NAND_MXS -# define CONFIG_SYS_MAX_NAND_DEVICE 1 # define CONFIG_SYS_NAND_BASE 0x40000000 # define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h index 9ab3f8a..a82641b 100644 --- a/include/configs/imx6_logic.h +++ b/include/configs/imx6_logic.h @@ -116,7 +116,6 @@ /* Environment organization */ /* NAND stuff */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE diff --git a/include/configs/imx6ulz_smm_m2.h b/include/configs/imx6ulz_smm_m2.h index 50885c5..46a96f1 100644 --- a/include/configs/imx6ulz_smm_m2.h +++ b/include/configs/imx6ulz_smm_m2.h @@ -71,7 +71,6 @@ #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE /* NAND */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x20000000 diff --git a/include/configs/imx8mn_bsh_smm_s2.h b/include/configs/imx8mn_bsh_smm_s2.h index c6b2962..a2323bd 100644 --- a/include/configs/imx8mn_bsh_smm_s2.h +++ b/include/configs/imx8mn_bsh_smm_s2.h @@ -43,7 +43,6 @@ #define PHYS_SDRAM_SIZE SZ_256M /* NAND */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x20000000 diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h index ddc035a..8eb7456 100644 --- a/include/configs/imx8mp_rsb3720.h +++ b/include/configs/imx8mp_rsb3720.h @@ -171,7 +171,6 @@ #ifdef CONFIG_NAND_MXS /* NAND stuff */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x20000000 #endif /* CONFIG_NAND_MXS */ diff --git a/include/configs/km/km-mpc83xx.h b/include/configs/km/km-mpc83xx.h index 61c7134..f05aeac 100644 --- a/include/configs/km/km-mpc83xx.h +++ b/include/configs/km/km-mpc83xx.h @@ -60,7 +60,6 @@ #if defined(CONFIG_CMD_NAND) #define CONFIG_NAND_KMETER1 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE #endif diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h index 9565cea..1f5a025 100644 --- a/include/configs/km/pg-wcom-ls102xa.h +++ b/include/configs/km/pg-wcom-ls102xa.h @@ -119,7 +119,6 @@ #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } /* QRIO FPGA Definitions */ diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h index e5cc62e..6032f39 100644 --- a/include/configs/kmcent2.h +++ b/include/configs/kmcent2.h @@ -277,7 +277,6 @@ /* More NAND Flash Params */ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* QRIO on IFC CS2 */ #define CONFIG_SYS_QRIO_BASE 0xfb000000 diff --git a/include/configs/kmcoge5ne.h b/include/configs/kmcoge5ne.h index b9d20c9..d6b60d8 100644 --- a/include/configs/kmcoge5ne.h +++ b/include/configs/kmcoge5ne.h @@ -11,7 +11,6 @@ #define CONFIG_HOSTNAME "kmcoge5ne" #define CONFIG_NAND_ECC_BCH #define CONFIG_NAND_KMETER1 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 #define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */ diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 37b8cd7..a788c30 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -107,7 +107,6 @@ #define CONFIG_SYS_NAND_FTIM3 0x0 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #endif /* diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index 4158d15..d207e47 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -111,7 +111,6 @@ #define CONFIG_SYS_NAND_FTIM3 0x0 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #endif diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 4bfe4e3..206de7e 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -82,7 +82,6 @@ #define CONFIG_SYS_NAND_FTIM3 0x0 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #ifdef CONFIG_NAND_BOOT diff --git a/include/configs/ls1046afrwy.h b/include/configs/ls1046afrwy.h index 2df5f3f..582b1ee 100644 --- a/include/configs/ls1046afrwy.h +++ b/include/configs/ls1046afrwy.h @@ -45,7 +45,6 @@ #define CONFIG_SYS_NAND_FTIM3 0x0 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE /* IFC Timing Params */ diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index b411efd..037d462 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -127,7 +127,6 @@ #define CONFIG_SYS_NAND_FTIM3 0x0 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #endif diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index 5d32957..f5f16ba 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -50,7 +50,6 @@ #define CONFIG_SYS_NAND_FTIM3 0x0 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE /* diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index 2d3351e..d50b76b 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -102,7 +102,6 @@ #define CONFIG_SYS_NAND_FTIM3 0x0 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index d98ed39..4edf40b 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -86,7 +86,6 @@ #define CONFIG_SYS_NAND_FTIM3 0x0 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index d02d7fc..1fa4aa3 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -103,7 +103,6 @@ #define CONFIG_SYS_NAND_FTIM3 0x0 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #define QIXIS_LBMAP_SWITCH 0x06 diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 09484dc..e1c66c5 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -100,7 +100,6 @@ #define CONFIG_SYS_NAND_FTIM3 0x0 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #define QIXIS_LBMAP_SWITCH 0x06 diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h index 4bf4496..f8bd31d 100644 --- a/include/configs/m53menlo.h +++ b/include/configs/m53menlo.h @@ -44,7 +44,6 @@ * NAND */ #ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR_AXI #define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI #define CONFIG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index b35ba59..b90a84d 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* NAND support */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Environment in NAND, aligned to start of last sector */ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index cffcd9d..9f913fa 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -52,7 +52,6 @@ /* NAND flash */ #ifdef CONFIG_CMD_NAND -# define CONFIG_SYS_MAX_NAND_DEVICE 1 # define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 /* 0x40000000 */ # define CONFIG_SYS_NAND_DBW_8 # define CONFIG_SYS_NAND_MASK_ALE (1 << 21) diff --git a/include/configs/mt7621.h b/include/configs/mt7621.h index 554c435..6a55e7a 100644 --- a/include/configs/mt7621.h +++ b/include/configs/mt7621.h @@ -21,7 +21,6 @@ #define MMC_SUPPORTS_TUNING /* NAND */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Serial SPL */ #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL) diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 20e00ec..6d4fff3 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -61,8 +61,5 @@ /* * Common NAND configuration */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#endif #endif /* _MV_COMMON_H */ diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h index 5a956f0..5debd91 100644 --- a/include/configs/mvebu_armada-8k.h +++ b/include/configs/mvebu_armada-8k.h @@ -25,8 +25,6 @@ /* When runtime detection fails this is the default */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - /* USB ethernet */ /* diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h index c76e7ea..7e54bb2 100644 --- a/include/configs/mx6sabreauto.h +++ b/include/configs/mx6sabreauto.h @@ -36,7 +36,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 /* NAND stuff */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 /* DMA stuff, needed for GPMI/MXS NAND support */ diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h index c878041..407b643 100644 --- a/include/configs/mx6sxsabreauto.h +++ b/include/configs/mx6sxsabreauto.h @@ -86,7 +86,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR /* NAND stuff */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 /* DMA stuff, needed for GPMI/MXS NAND support */ diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index b96341a..2a97d2f 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -93,7 +93,6 @@ */ #ifdef CONFIG_NAND_MXS /* NAND stuff */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 /* DMA stuff, needed for GPMI/MXS NAND support */ diff --git a/include/configs/mxs.h b/include/configs/mxs.h index fc15ed8..e861038 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -83,7 +83,6 @@ /* NAND */ #ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x60000000 #endif diff --git a/include/configs/mys_6ulx.h b/include/configs/mys_6ulx.h index 4162ee8..bb68ddb 100644 --- a/include/configs/mys_6ulx.h +++ b/include/configs/mys_6ulx.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE /* NAND */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 /* USB Configs */ diff --git a/include/configs/npi_imx6ull.h b/include/configs/npi_imx6ull.h index 217427a..8ff26fe 100644 --- a/include/configs/npi_imx6ull.h +++ b/include/configs/npi_imx6ull.h @@ -31,7 +31,6 @@ #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE /* NAND */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x40000000 /* USB Configs */ diff --git a/include/configs/octeontx_common.h b/include/configs/octeontx_common.h index 373eb91..6e69b3d 100644 --- a/include/configs/octeontx_common.h +++ b/include/configs/octeontx_common.h @@ -46,8 +46,4 @@ /** EMMC specific defines */ -#if defined(CONFIG_NAND_OCTEONTX) -#define CONFIG_SYS_MAX_NAND_DEVICE 8 -#endif - #endif /* __OCTEONTX_COMMON_H__ */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index ad3dbbc..d46ca33 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -21,7 +21,6 @@ /* NAND */ #if defined(CONFIG_MTD_RAW_NAND) #define CONFIG_SYS_FLASH_BASE NAND_BASE -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 10, 11, 12, 13} #define CONFIG_SYS_NAND_ECCSIZE 512 diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index c47d557..77629d7 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -26,7 +26,6 @@ /* NAND */ #if defined(CONFIG_MTD_RAW_NAND) #define CONFIG_SYS_FLASH_BASE NAND_BASE -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 10, 11, 12, 13} #define CONFIG_SYS_NAND_ECCSIZE 512 diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 1af87b2..442a3ca 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -16,7 +16,6 @@ /* Board NAND Info. */ #ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ /* NAND devices */ #define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \ 13, 14, 16, 17, 18, 19, 20, 21, 22, \ diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index c644768..df4a16f 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -112,7 +112,6 @@ #define CONFIG_SYS_NAND_MASK_CLE 0x10 #define CONFIG_SYS_NAND_MASK_ALE 0x8 #undef CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST #define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC #define CONFIG_SYS_NAND_U_BOOT_SIZE SZ_512K diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index fcb287d..2555953 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -215,7 +215,6 @@ #endif #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | (2<