From: Daniel KochmaƄski Date: Tue, 26 May 2015 15:00:42 +0000 (+0200) Subject: sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory X-Git-Tag: v2015.07-rc2~50^2~6 X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=commitdiff_plain;h=f76eba38b3eda905ff3bdc18dd1240d3dcbc6e5a sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory This commit adds support to the sunxi SPL to load u-boot from the internal NAND. Note this only adds support to access the boot partitions to load u-boot, full NAND support to load the kernel, etc. from the nand data partition will come later. Signed-off-by: Roy Spliet Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede --- diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 23aa249..a82c8b9 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -119,11 +119,20 @@ void s_init(void) #ifdef CONFIG_SPL_BUILD /* The sunxi internal brom will try to loader external bootloader * from mmc0, nand flash, mmc2. - * Unfortunately we can't check how SPL was loaded so assume - * it's always the first SD/MMC controller + * + * Unfortunately we can't check how SPL was loaded so assume it's + * always the first SD/MMC controller, unless it was explicitly + * stated that SPL is on nand flash. */ u32 spl_boot_device(void) { +#if defined(CONFIG_SPL_NAND_SUPPORT) + /* + * This is compile time configuration informing SPL, that it + * was loaded from nand flash. + */ + return BOOT_DEVICE_NAND; +#else /* * When booting from the SD card, the "eGON.BT0" signature is expected * to be found in memory at the address 0x0004 (see the "mksunxiboot" @@ -144,6 +153,7 @@ u32 spl_boot_device(void) return BOOT_DEVICE_MMC1; else return BOOT_DEVICE_BOARD; +#endif } /* No confirmation data available in SPL yet. Hardcode bootmode */ diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 496295d..b628fee 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -157,6 +157,8 @@ enum sunxi_gpio_number { #define SUN5I_GPB_UART0 2 #define SUN8I_GPB_UART2 2 +#define SUNXI_GPC_NAND 2 + #define SUNXI_GPC_SDC2 3 #define SUN6I_GPC_SDC3 4 diff --git a/arch/arm/include/asm/arch-sunxi/nand.h b/arch/arm/include/asm/arch-sunxi/nand.h new file mode 100644 index 0000000..22844d8 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/nand.h @@ -0,0 +1,67 @@ +/* + * (C) Copyright 2015 Roy Spliet + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_NAND_H +#define _SUNXI_NAND_H + +#include + +struct sunxi_nand +{ + u32 ctl; /* 0x000 Configure and control */ + u32 st; /* 0x004 Status information */ + u32 intr; /* 0x008 Interrupt control */ + u32 timing_ctl; /* 0x00C Timing control */ + u32 timing_cfg; /* 0x010 Timing configure */ + u32 addr_low; /* 0x014 Low word address */ + u32 addr_high; /* 0x018 High word address */ + u32 block_num; /* 0x01C Data block number */ + u32 data_cnt; /* 0x020 Data counter for transfer */ + u32 cmd; /* 0x024 NDFC commands */ + u32 rcmd_set; /* 0x028 Read command set for vendor NAND mem */ + u32 wcmd_set; /* 0x02C Write command set */ + u32 io_data; /* 0x030 IO data */ + u32 ecc_ctl; /* 0x034 ECC configure and control */ + u32 ecc_st; /* 0x038 ECC status and operation info */ + u32 efr; /* 0x03C Enhanced feature */ + u32 err_cnt0; /* 0x040 Corrected error bit counter 0 */ + u32 err_cnt1; /* 0x044 Corrected error bit counter 1 */ + u32 user_data[16]; /* 0x050[16] User data field */ + u32 efnand_st; /* 0x090 EFNAND status */ + u32 res0[3]; + u32 spare_area; /* 0x0A0 Spare area configure */ + u32 pat_id; /* 0x0A4 Pattern ID register */ + u32 rdata_sta_ctl; /* 0x0A8 Read data status control */ + u32 rdata_sta_0; /* 0x0AC Read data status 0 */ + u32 rdata_sta_1; /* 0x0B0 Read data status 1 */ + u32 res1[3]; + u32 mdma_addr; /* 0x0C0 MBUS DMA Address */ + u32 mdma_cnt; /* 0x0C4 MBUS DMA data counter */ +}; + +#define SUNXI_NAND_CTL_EN (1 << 0) +#define SUNXI_NAND_CTL_RST (1 << 1) +#define SUNXI_NAND_CTL_PAGE_SIZE(a) ((fls(a) - 11) << 8) +#define SUNXI_NAND_CTL_RAM_METHOD_DMA (1 << 14) + +#define SUNXI_NAND_ST_CMD_INT (1 << 1) +#define SUNXI_NAND_ST_DMA_INT (1 << 2) +#define SUNXI_NAND_ST_FIFO_FULL (1 << 3) + +#define SUNXI_NAND_CMD_ADDR_CYCLES(a) ((a - 1) << 16); +#define SUNXI_NAND_CMD_SEND_CMD1 (1 << 22) +#define SUNXI_NAND_CMD_WAIT_FLAG (1 << 23) +#define SUNXI_NAND_CMD_ORDER_INTERLEAVE 0 +#define SUNXI_NAND_CMD_ORDER_SEQ (1 << 25) + +#define SUNXI_NAND_ECC_CTL_ECC_EN (1 << 0) +#define SUNXI_NAND_ECC_CTL_PIPELINE (1 << 3) +#define SUNXI_NAND_ECC_CTL_BS_512B (1 << 5) +#define SUNXI_NAND_ECC_CTL_RND_EN (1 << 9) +#define SUNXI_NAND_ECC_CTL_MODE(a) ((a) << 12) +#define SUNXI_NAND_ECC_CTL_RND_SEED(a) ((a) << 16) + +#endif /* _SUNXI_NAND_H */ diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 6f5fde9..c6c876d 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -271,6 +271,18 @@ config MMC_SUNXI_SLOT_EXTRA slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable support for this. +config SPL_NAND_SUPPORT + bool "SPL/NAND mode support" + depends on SPL + default n + ---help--- + This enables support for booting from NAND internal + memory. U-Boot SPL doesn't detect where is it load from, + therefore this option is needed to properly load image from + flash. Option also disables MMC functionality on U-Boot due to + initialization errors encountered, when both controllers are + enabled. + config USB0_VBUS_PIN string "Vbus enable pin for usb0 (otg)" default "" diff --git a/board/sunxi/board.c b/board/sunxi/board.c index ed60e74..f27967b 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -22,6 +22,9 @@ #ifdef CONFIG_AXP221_POWER #include #endif +#ifdef CONFIG_NAND_SUNXI +#include +#endif #include #include #include @@ -315,6 +318,21 @@ int board_mmc_init(bd_t *bis) } #endif +#ifdef CONFIG_NAND +void board_nand_init(void) +{ + unsigned int pin; + static u8 ports[] = CONFIG_NAND_SUNXI_GPC_PORTS; + + /* Configure AHB muxes to connect output pins with NAND controller */ + for (pin = 0; pin < 16; pin++) + sunxi_gpio_set_cfgpin(SUNXI_GPC(pin), SUNXI_GPC_NAND); + + for (pin = 0; pin < ARRAY_SIZE(ports); pin++) + sunxi_gpio_set_cfgpin(SUNXI_GPC(ports[pin]), SUNXI_GPC_NAND); +} +#endif + void i2c_init_board(void) { #ifdef CONFIG_I2C0_ENABLE diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 347ea62..a0cf4d5 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -73,5 +73,6 @@ obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_spl.o obj-$(CONFIG_NAND_MXC) += mxc_nand_spl.o obj-$(CONFIG_NAND_MXS) += mxs_nand_spl.o mxs_nand.o +obj-$(CONFIG_NAND_SUNXI) += sunxi_nand_spl.o endif # drivers diff --git a/drivers/mtd/nand/sunxi_nand_spl.c b/drivers/mtd/nand/sunxi_nand_spl.c new file mode 100644 index 0000000..75982f5 --- /dev/null +++ b/drivers/mtd/nand/sunxi_nand_spl.c @@ -0,0 +1,273 @@ +/* + * Copyright (c) 2014, Antmicro Ltd + * Copyright (c) 2015, Turtle Solutions + * Copyright (c) 2015, Roy Spliet + * + * SPDX-License-Identifier: GPL-2.0+ + * + * \todo Detect chip parameters (page size, ECC mode, randomisation...) + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +void +nand_init(void) +{ + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + struct sunxi_nand * const nand = (struct sunxi_nand *)SUNXI_NFC_BASE; + u32 val; + + board_nand_init(); + + /* "un-gate" NAND clock and clock source + * This assumes that the clock was already correctly configured by + * BootROM */ + setbits_le32(&ccm->ahb_gate0, (1 << AHB_GATE_OFFSET_NAND0)); +#ifdef CONFIG_MACH_SUN9I + setbits_le32(&ccm->ahb_gate1, (1 << AHB_GATE_OFFSET_DMA)); +#else + setbits_le32(&ccm->ahb_gate0, (1 << AHB_GATE_OFFSET_DMA)); +#endif + setbits_le32(&ccm->nand0_clk_cfg, 0x80000000); + + val = readl(&nand->ctl); + val |= SUNXI_NAND_CTL_RST; + writel(val, &nand->ctl); + + /* Wait until reset pin is deasserted */ + do { + val = readl(&nand->ctl); + if (!(val & SUNXI_NAND_CTL_RST)) + break; + } while (1); + + /** \todo Chip select, currently kind of static */ + val = readl(&nand->ctl); + val &= 0xf0fff0f2; + val |= SUNXI_NAND_CTL_EN; + val |= SUNXI_NAND_CTL_PAGE_SIZE(CONFIG_NAND_SUNXI_PAGE_SIZE); + writel(val, &nand->ctl); + + writel(0x100, &nand->timing_ctl); + writel(0x7ff, &nand->timing_cfg); + + /* reset CMD */ + val = SUNXI_NAND_CMD_SEND_CMD1 | SUNXI_NAND_CMD_WAIT_FLAG | + NAND_CMD_RESET; + writel(val, &nand->cmd); + do { + val = readl(&nand->st); + if (val & (1<<1)) + break; + udelay(1000); + } while (1); + + printf("Nand initialised\n"); +} + +int +nand_wait_timeout(u32 *reg, u32 mask, u32 val) +{ + unsigned long tmo = timer_get_us() + 1000000; /* 1s */ + + while ((readl(reg) & mask) != val) { + if (timer_get_us() > tmo) + return -ETIMEDOUT; + } + + return 0; +} + +/* random seed */ +static const uint16_t random_seed[128] = { + 0x2b75, 0x0bd0, 0x5ca3, 0x62d1, 0x1c93, 0x07e9, 0x2162, 0x3a72, + 0x0d67, 0x67f9, 0x1be7, 0x077d, 0x032f, 0x0dac, 0x2716, 0x2436, + 0x7922, 0x1510, 0x3860, 0x5287, 0x480f, 0x4252, 0x1789, 0x5a2d, + 0x2a49, 0x5e10, 0x437f, 0x4b4e, 0x2f45, 0x216e, 0x5cb7, 0x7130, + 0x2a3f, 0x60e4, 0x4dc9, 0x0ef0, 0x0f52, 0x1bb9, 0x6211, 0x7a56, + 0x226d, 0x4ea7, 0x6f36, 0x3692, 0x38bf, 0x0c62, 0x05eb, 0x4c55, + 0x60f4, 0x728c, 0x3b6f, 0x2037, 0x7f69, 0x0936, 0x651a, 0x4ceb, + 0x6218, 0x79f3, 0x383f, 0x18d9, 0x4f05, 0x5c82, 0x2912, 0x6f17, + 0x6856, 0x5938, 0x1007, 0x61ab, 0x3e7f, 0x57c2, 0x542f, 0x4f62, + 0x7454, 0x2eac, 0x7739, 0x42d4, 0x2f90, 0x435a, 0x2e52, 0x2064, + 0x637c, 0x66ad, 0x2c90, 0x0bad, 0x759c, 0x0029, 0x0986, 0x7126, + 0x1ca7, 0x1605, 0x386a, 0x27f5, 0x1380, 0x6d75, 0x24c3, 0x0f8e, + 0x2b7a, 0x1418, 0x1fd1, 0x7dc1, 0x2d8e, 0x43af, 0x2267, 0x7da3, + 0x4e3d, 0x1338, 0x50db, 0x454d, 0x764d, 0x40a3, 0x42e6, 0x262b, + 0x2d2e, 0x1aea, 0x2e17, 0x173d, 0x3a6e, 0x71bf, 0x25f9, 0x0a5d, + 0x7c57, 0x0fbe, 0x46ce, 0x4939, 0x6b17, 0x37bb, 0x3e91, 0x76db, +}; + +uint32_t ecc_errors = 0; + +static void +nand_config_ecc(struct sunxi_nand *nand, uint32_t page, int syndrome) +{ + static u8 strength[] = {16, 24, 28, 32, 40, 48, 56, 60, 64}; + int i; + uint32_t ecc_mode; + u32 ecc; + u16 seed = 0; + + for (i = 0; i < ARRAY_SIZE(strength); i++) { + if (CONFIG_NAND_SUNXI_ECC_STRENGTH == strength[i]) { + ecc_mode = i; + break; + } + } + + if (i == ARRAY_SIZE(strength)) { + printf("ECC strength unsupported\n"); + return; + } + + ecc = SUNXI_NAND_ECC_CTL_ECC_EN | + SUNXI_NAND_ECC_CTL_PIPELINE | + SUNXI_NAND_ECC_CTL_RND_EN | + SUNXI_NAND_ECC_CTL_MODE(ecc_mode); + + if (CONFIG_NAND_SUNXI_ECC_STEP == 512) + ecc |= SUNXI_NAND_ECC_CTL_BS_512B; + + if (syndrome) + seed = 0x4A80; + else + seed = random_seed[page % ARRAY_SIZE(random_seed)]; + + ecc |= SUNXI_NAND_ECC_CTL_RND_SEED(seed); + + writel(ecc, &nand->ecc_ctl); +} + +/* read CONFIG_NAND_SUNXI_ECC_STEP bytes from real_addr to temp_buf */ +void +nand_read_block(struct sunxi_nand *nand, phys_addr_t src, dma_addr_t dst, + int syndrome) +{ + struct sunxi_dma * const dma = (struct sunxi_dma *)SUNXI_DMA_BASE; + struct sunxi_dma_cfg * const dma_cfg = &dma->ddma[0]; + + uint32_t shift; + uint32_t page; + uint32_t addr; + uint32_t oob_offset; + uint32_t ecc_bytes; + u32 val; + u32 cmd; + + page = src / CONFIG_NAND_SUNXI_PAGE_SIZE; + if (page > 0xFFFF) { + /* TODO: currently this is not supported */ + printf("Reading from address >= %08X is not allowed.\n", + 0xFFFF * CONFIG_NAND_SUNXI_PAGE_SIZE); + return; + } + + shift = src % CONFIG_NAND_SUNXI_PAGE_SIZE; + writel(0, &nand->ecc_st); + + /* ECC_CTL, randomization */ + ecc_bytes = CONFIG_NAND_SUNXI_ECC_STRENGTH * + fls(CONFIG_NAND_SUNXI_ECC_STEP * 8); + ecc_bytes = DIV_ROUND_UP(ecc_bytes, 8); + ecc_bytes += (ecc_bytes & 1); /* Align to 2-bytes */ + ecc_bytes += 4; + + nand_config_ecc(nand, page, syndrome); + if (syndrome) { + /* shift every 1kB in syndrome */ + shift += (shift / CONFIG_NAND_SUNXI_ECC_STEP) * ecc_bytes; + oob_offset = CONFIG_NAND_SUNXI_ECC_STEP + shift; + } else { + oob_offset = CONFIG_NAND_SUNXI_PAGE_SIZE + + (shift / CONFIG_NAND_SUNXI_ECC_STEP) * ecc_bytes; + } + + addr = (page << 16) | shift; + + /* DMA */ + val = readl(&nand->ctl); + writel(val | SUNXI_NAND_CTL_RAM_METHOD_DMA, &nand->ctl); + + writel(oob_offset, &nand->spare_area); + + /* DMAC + * \todo Separate this into a tidy driver */ + writel(0x0, &dma->irq_en); /* clear dma interrupts */ + writel((uint32_t) &nand->io_data , &dma_cfg->src_addr); + writel(dst , &dma_cfg->dst_addr); + writel(0x00007F0F , &dma_cfg->ddma_para); + writel(CONFIG_NAND_SUNXI_ECC_STEP, &dma_cfg->bc); + + val = SUNXI_DMA_CTL_SRC_DRQ(DDMA_SRC_DRQ_NAND) | + SUNXI_DMA_CTL_MODE_IO | + SUNXI_DMA_CTL_SRC_DATA_WIDTH_32 | + SUNXI_DMA_CTL_DST_DRQ(DDMA_DST_DRQ_SDRAM) | + SUNXI_DMA_CTL_DST_DATA_WIDTH_32 | + SUNXI_DMA_CTL_TRIGGER; + writel(val, &dma_cfg->ctl); + + writel(0x00E00530, &nand->rcmd_set); + nand_wait_timeout(&nand->st, SUNXI_NAND_ST_FIFO_FULL, 0); + + writel(1 , &nand->block_num); + writel(addr, &nand->addr_low); + writel(0 , &nand->addr_high); + + /* CMD (PAGE READ) */ + cmd = 0x85E80000; + cmd |= SUNXI_NAND_CMD_ADDR_CYCLES(CONFIG_NAND_SUNXI_ADDR_CYCLES); + cmd |= (syndrome ? SUNXI_NAND_CMD_ORDER_SEQ : + SUNXI_NAND_CMD_ORDER_INTERLEAVE); + writel(cmd, &nand->cmd); + + if(nand_wait_timeout(&nand->st, SUNXI_NAND_ST_DMA_INT, + SUNXI_NAND_ST_DMA_INT)) { + printf("NAND timeout reading data\n"); + return; + } + + if(nand_wait_timeout(&dma_cfg->ctl, SUNXI_DMA_CTL_TRIGGER, 0)) { + printf("NAND timeout reading data\n"); + return; + } + + if (readl(&nand->ecc_st)) + ecc_errors++; +} + +int +nand_spl_load_image(uint32_t offs, unsigned int size, void *dest) +{ + struct sunxi_nand * const nand = (struct sunxi_nand *)SUNXI_NFC_BASE; + dma_addr_t dst_block; + dma_addr_t dst_end; + phys_addr_t addr = offs; + + dst_end = ((dma_addr_t) dest) + size; + + memset((void *)dest, 0x0, size); + ecc_errors = 0; + for (dst_block = (dma_addr_t) dest; dst_block < dst_end; + dst_block += CONFIG_NAND_SUNXI_ECC_STEP, + addr += CONFIG_NAND_SUNXI_ECC_STEP) { + /* syndrome read first 4MiB to match Allwinner BootROM */ + nand_read_block(nand, addr, dst_block, addr < 0x400000); + } + + if (ecc_errors) + printf("Error: %d ECC failures detected\n", ecc_errors); + return ecc_errors == 0; +} + +void +nand_deselect(void) +{} diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h index ea079eb..a3c9408 100644 --- a/include/configs/sun4i.h +++ b/include/configs/sun4i.h @@ -18,6 +18,7 @@ #endif #define CONFIG_SUNXI_USB_PHYS 3 +#define CONFIG_NAND_SUNXI_GPC_PORTS {16, 17, 18, 19, 20, 21, 22, 24} /* * Include common sunxi configuration where most the settings are diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h index d257659..8e13df5 100644 --- a/include/configs/sun5i.h +++ b/include/configs/sun5i.h @@ -19,6 +19,9 @@ #define CONFIG_SUNXI_USB_PHYS 2 +/* \todo A13 only defines port 19, whereas A10s requires each of these */ +#define CONFIG_NAND_SUNXI_GPC_PORTS {16, 17, 18, 19} + /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h index 2c24bd2..e1263f6 100644 --- a/include/configs/sun6i.h +++ b/include/configs/sun6i.h @@ -22,6 +22,8 @@ #define CONFIG_SUNXI_USB_PHYS 3 +#define CONFIG_NAND_SUNXI_GPC_PORTS {24, 25, 26} + /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index 56101a9..3d26ce8 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -24,6 +24,8 @@ #define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE #define CONFIG_TIMER_CLK_FREQ 24000000 +#define CONFIG_NAND_SUNXI_GPC_PORTS {16, 17, 18, 19, 20, 21, 22, 24} + /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h index 7111c63..cd33758 100644 --- a/include/configs/sun8i.h +++ b/include/configs/sun8i.h @@ -20,6 +20,12 @@ #define CONFIG_SUNXI_USB_PHYS 2 +#if defined(CONFIG_MACH_SUN8I_A23) +#define CONFIG_NAND_SUNXI_GPC_PORTS {16, 17, 18} +#elif defined(CONFIG_MACH_SUN8I_A33) +#define CONFIG_NAND_SUNXI_GPC_PORTS {16} +#endif + /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 76f42f5..aad22f7 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -148,8 +148,10 @@ #define CONFIG_CMD_MMC #define CONFIG_MMC_SUNXI #define CONFIG_MMC_SUNXI_SLOT 0 +#if !defined(CONFIG_SPL_NAND_SUPPORT) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 /* first detected MMC controller */ +#endif /* CONFIG_SPL_NAND_SUPPORT */ #endif /* 4MB of malloc() pool */ @@ -355,6 +357,24 @@ extern int soft_i2c_gpio_scl; #define CONFIG_ENV_IS_NOWHERE #endif +#ifdef CONFIG_SPL_NAND_SUPPORT +#define CONFIG_NAND +#define CONFIG_SYS_NAND_SELF_INIT +#define CONFIG_NAND_SUNXI +#define CONFIG_CMD_SPL_WRITE_SIZE 0x000400 +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x008000 + +/* \todo Make these parameterisable in kernel config ? */ +#define CONFIG_NAND_SUNXI_PAGE_SIZE 8192 +#define CONFIG_NAND_SUNXI_ECC_STEP 1024 +#define CONFIG_NAND_SUNXI_ECC_STRENGTH 40 +#define CONFIG_NAND_SUNXI_ADDR_CYCLES 5 + +#ifndef CONFIG_NAND_SUNXI_GPC_PORTS +#error "No NAND GPC ports defined, NAND unsupported" +#endif +#endif /* CONFIG_SPL_NAND_SUPPORT */ + #define CONFIG_MISC_INIT_R #define CONFIG_SYS_CONSOLE_IS_IN_ENV