X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fwoodburn_common.h;h=259205e88176cdeb8bd232403851a35acfb81972;hp=f546c385e9fd37dc94a64d16ecb59adc53e4f8ac;hb=HEAD;hpb=01abae4d04868dede60947867699bf096a1831ff

diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
deleted file mode 100644
index f546c38..0000000
--- a/include/configs/woodburn_common.h
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Configuration for the woodburn board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __WOODBURN_COMMON_CONFIG_H
-#define __WOODBURN_COMMON_CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-
- /* High Level Configuration Options */
-#define CONFIG_MX35
-#define CONFIG_MX35_HCLK_FREQ	24000000
-#define CONFIG_SYS_FSL_CLK
-
-#define CONFIG_SYS_DCACHE_OFF
-
-#define CONFIG_MACH_TYPE		MACH_TYPE_FLEA3
-
-/* This is required to setup the ESDC controller */
-
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_REVISION_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-#define CONFIG_SYS_SPD_BUS_NUM		0
-#define CONFIG_MXC_SPI
-#define CONFIG_MXC_GPIO
-
-/* PMIC Controller */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_FSL
-#define CONFIG_POWER_FSL_MC13892
-#define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x8
-#define CONFIG_RTC_MC13XXX
-
-/* mmc driver */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#define CONFIG_SYS_FSL_ESDHC_NUM	1
-
-/*
- * UART (console)
- */
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE	UART1_BASE
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX	1
-
-/*
- * Command definition
- */
-#define CONFIG_CMD_DATE
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_DNS
-
-#define CONFIG_CMD_NAND
-
-#define CONFIG_MXC_GPIO
-
-#define CONFIG_NET_RETRY_COUNT	100
-
-
-#define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */
-
-/*
- * Ethernet on SOC (FEC)
- */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE	FEC_BASE_ADDR
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
-#define CONFIG_FEC_MXC_PHYADDR	0x1
-
-#define CONFIG_MII
-#define CONFIG_DISCOVER_PHY
-
-#define CONFIG_ARP_TIMEOUT	200UL
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x10000
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1
-#define PHYS_SDRAM_1		CSD0_BASE_ADDR
-#define PHYS_SDRAM_1_SIZE	(256 * 1024 * 1024)
-
-#define CONFIG_SYS_SDRAM_BASE		CSD0_BASE_ADDR
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(LOW_LEVEL_SRAM_STACK - \
-						IRAM_BASE_ADDR - \
-						GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR		(IRAM_BASE_ADDR + \
-					CONFIG_SYS_GBL_DATA_OFFSET)
-
-/*
- * MTD Command for mtdparts
- */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT		"nand0=mxc_nand,nor0=physmap-flash.0"
-#define MTDPARTS_DEFAULT	"mtdparts=mxc_nand:50m(root1)," \
-				"32m(rootfb)," \
-				"64m(pcache)," \
-				"64m(app1)," \
-				"10m(app2),-(spool);" \
-				"physmap-flash.0:512k(u-boot),64k(env1)," \
-				"64k(env2),3776k(kernel1),3776k(kernel2)"
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_BASE		CS0_BASE_ADDR
-#define CONFIG_SYS_MAX_FLASH_BANKS 1	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512	/* max number of sectors on one chip */
-/* Monitor at beginning of flash */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-
-#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
-#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
-
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + \
-				CONFIG_SYS_MONITOR_LEN)
-
-#define CONFIG_ENV_IS_IN_FLASH
-
-/*
- * CFI FLASH driver setup
- */
-#define CONFIG_SYS_FLASH_CFI		/* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER
-
-/* A non-standard buffered write algorithm */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* faster */
-#define CONFIG_SYS_FLASH_PROTECTION	/* Use hardware sector protection */
-
-/*
- * NAND FLASH driver setup
- */
-#define CONFIG_NAND_MXC
-#define CONFIG_NAND_MXC_V1_1
-#define CONFIG_MXC_NAND_REGS_BASE	(NFC_BASE_ADDR)
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		(NFC_BASE_ADDR)
-#define CONFIG_MXC_NAND_HWECC
-#define CONFIG_SYS_NAND_LARGEPAGE
-
-#if 0
-#define CONFIG_MTD_DEBUG
-#define CONFIG_MTD_DEBUG_VERBOSE	7
-#endif
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-/*
- * Default environment and default scripts
- * to update uboot and load kernel
- */
-
-#define CONFIG_HOSTNAME woodburn
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip_sta=setenv bootargs ${bootargs} "			\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
-	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
-		"else run addip_sta;fi\0"	\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"addtty=setenv bootargs ${bootargs}"				\
-		" console=ttymxc0,${baudrate}\0"			\
-	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
-	"loadaddr=80800000\0"						\
-	"kernel_addr_r=80800000\0"					\
-	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
-	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
-	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"	\
-	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr}\0"				\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
-		"run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr_r}\0"				\
-	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
-		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
-	"net_self=if run net_self_load;then "				\
-		"run ramargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
-		"else echo Images not loades;fi\0"			\
-	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
-	"load=tftp ${loadaddr} ${u-boot}\0"				\
-	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"		\
-	"update=protect off ${uboot_addr} +80000;"			\
-		"erase ${uboot_addr} +80000;"				\
-		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
-	"upd=if run load;then echo Updating u-boot;if run update;"	\
-		"then echo U-Boot updated;"				\
-			"else echo Error updating u-boot !;"		\
-			"echo Board without bootloader !!;"		\
-		"fi;"							\
-		"else echo U-Boot not downloaded..exiting;fi\0"		\
-	"bootcmd=run net_nfs\0"
-
-#endif				/* __CONFIG_H */