X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fsnapper9260.h;h=1ebee714ba3e5c568c86c99b937b7d5a2c645644;hp=32abeb03fb4916d577482f702e2f4e912aba5699;hb=HEAD;hpb=07298e4828b7d0904fbfd77d386f01b4a37a5609

diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
deleted file mode 100644
index 32abeb0..0000000
--- a/include/configs/snapper9260.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Bluewater Systems Snapper 9260 and 9G20 modules
- *
- * (C) Copyright 2011 Bluewater Systems
- *   Author: Andre Renaud <andre@bluewatersys.com>
- *   Author: Ryan Mallon <ryan@bluewatersys.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* SoC type is defined in boards.cfg */
-#include <asm/hardware.h>
-#include <linux/sizes.h>
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK	18432000 /* External Crystal, in Hz */
-#define CONFIG_SYS_AT91_SLOW_CLOCK	32768
-
-/* CPU */
-
-/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE		ATMEL_BASE_CS1
-#define CONFIG_SYS_SDRAM_SIZE		(64 * 1024 * 1024) /* 64MB */
-#define CONFIG_SYS_INIT_SP_ADDR		(ATMEL_BASE_SRAM1 + 0x1000 - \
-					 GENERATED_GBL_DATA_SIZE)
-
-/* Mem test settings */
-
-/* NAND Flash */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		ATMEL_BASE_CS3
-#define CONFIG_SYS_NAND_DBW_8
-#define CONFIG_SYS_NAND_MASK_ALE	(1 << 21) /* AD21 */
-#define CONFIG_SYS_NAND_MASK_CLE	(1 << 22) /* AD22 */
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PC13
-
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_RESET_PHY_R
-#define CONFIG_AT91_WANTS_COMMON_PHY
-#define CONFIG_TFTP_PORT
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE	ATMEL_UHP_BASE
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"at91sam9260"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-
-/* GPIOs and IO expander */
-#define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO_PULLUP		1
-#define CONFIG_PCA953X
-#define CONFIG_SYS_I2C_PCA953X_ADDR	0x28
-#define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x28, 16} }
-
-/* UARTs/Serial console */
-#ifndef CONFIG_DM_SERIAL
-#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
-#define CONFIG_USART_ID			ATMEL_ID_SYS
-#endif
-
-/* I2C - Bit-bashed */
-#define CONFIG_SOFT_I2C_READ_REPEATED_START
-#define I2C_INIT do {							\
-		at91_set_gpio_output(AT91_PIN_PA23, 1);			\
-		at91_set_gpio_output(AT91_PIN_PA24, 1);			\
-		at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 1);	\
-		at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 1);	\
-	} while (0)
-#define I2C_SOFT_DECLARATIONS
-#define I2C_ACTIVE
-#define I2C_TRISTATE	at91_set_gpio_input(AT91_PIN_PA23, 1);
-#define I2C_READ	at91_get_gpio_value(AT91_PIN_PA23);
-#define I2C_SDA(bit) do {						\
-		if (bit) {						\
-			at91_set_gpio_input(AT91_PIN_PA23, 1);		\
-		} else {						\
-			at91_set_gpio_output(AT91_PIN_PA23, 1);		\
-			at91_set_gpio_value(AT91_PIN_PA23, bit);	\
-		}							\
-	} while (0)
-#define I2C_SCL(bit)	at91_set_pio_value(AT91_PIO_PORTA, 24, bit)
-#define I2C_DELAY	udelay(2)
-
-/* Boot options */
-
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/* Environment settings */
-
-/* Console settings */
-
-#endif /* __CONFIG_H */