X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fscb9328.h;h=e6d272dd1f53c4d7b1b71e006c0cc8b1f2a64ac1;hp=a09310c889626d4d2789fb46ca21c45e287d3864;hb=HEAD;hpb=326ea986ac150acdc7656d57fca647db80b50158 diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h deleted file mode 100644 index a09310c..0000000 --- a/include/configs/scb9328.h +++ /dev/null @@ -1,323 +0,0 @@ -/* - * Copyright (C) 2003 ETC s.r.o. - * - * SPDX-License-Identifier: GPL-2.0+ - * Written by Peter Figuli , 2003. - * - * 2003/13/06 Initial MP10 Support copied from wepep250 - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */ -#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */ -#define CONFIG_SCB9328 1 /* on a scb9328tronix board */ - -#define CONFIG_IMX_SERIAL -#define CONFIG_IMX_SERIAL1 -/* - * Select serial console configuration - */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - -#undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_SOURCE - -/* - * Boot options. Setting delay to -1 stops autostart count down. - * NOTE: Sending parameters to kernel depends on kernel version and - * 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept - * parameters at all! Do not get confused by them so. - */ -#define CONFIG_BOOTDELAY -1 -#define CONFIG_BOOTARGS "console=ttySMX0,115200n8 root=/dev/mtdblock3 rootfstype=jffs2 mtdparts=scb9328_flash:128k(U-boot)ro,128k(U-boot_env),1m(kernel),4m(root),4m(fs) eval_board=evk9328" -#define CONFIG_BOOTCOMMAND "bootm 10040000" -#define CONFIG_SHOW_BOOT_PROGRESS -#define CONFIG_ETHADDR 80:81:82:83:84:85 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 10.10.10.9 -#define CONFIG_SERVERIP 10.10.10.10 - -/* - * General options for u-boot. Modify to save memory foot print - */ -#define CONFIG_SYS_LONGHELP /* undef saves memory */ -#define CONFIG_SYS_PROMPT "scb9328> " /* prompt string */ -#define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */ -#define CONFIG_SYS_MAXARGS 16 /* max command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */ - -#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */ -#define CONFIG_SYS_MEMTEST_END 0x08F00000 - -#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */ - -#define CONFIG_BAUDRATE 115200 -/* - * Definitions related to passing arguments to kernel. - */ -#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */ -#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */ -#define CONFIG_INITRD_TAG 1 /* send initrd params */ - -/* - * Malloc pool need to host env + 128 Kb reserve for other allocations. - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) ) - -/* SDRAM Setup Values -0x910a8300 Precharge Command CAS 3 -0x910a8200 Precharge Command CAS 2 - -0xa10a8300 AutoRefresh Command CAS 3 -0xa10a8200 Set AutoRefresh Command CAS 2 */ - -#define PRECHARGE_CMD 0x910a8200 -#define AUTOREFRESH_CMD 0xa10a8200 - -/* - * SDRAM Memory Map - */ -/* SH FIXME */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */ -#define SCB9328_SDRAM_1 0x08000000 /* SDRAM bank #1 */ -#define SCB9328_SDRAM_1_SIZE 0x01000000 /* 16 MB */ - -#define CONFIG_SYS_TEXT_BASE 0x10000000 - -#define CONFIG_SYS_SDRAM_BASE SCB9328_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (SCB9328_SDRAM_1 + 0xf00000) - -/* - * Configuration for FLASH memory for the Synertronixx board - */ - -/* #define SCB9328_FLASH_32M */ - -/* 32MB */ -#ifdef SCB9328_FLASH_32M -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */ -#define SCB9328_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */ -#define SCB9328_FLASH_INTERLEAVE 1 /* ... made of 1 chip */ -#define SCB9328_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank */ -#define SCB9328_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */ -#define SCB9328_FLASH_BASE 0x10000000 /* location of flash memory */ -#define SCB9328_FLASH_UNLOCK 1 /* perform hw unlock first */ -#else - -/* 16MB */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */ -#define SCB9328_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */ -#define SCB9328_FLASH_INTERLEAVE 1 /* ... made of 1 chip */ -#define SCB9328_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank */ -#define SCB9328_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */ -#define SCB9328_FLASH_BASE 0x10000000 /* location of flash memory */ -#define SCB9328_FLASH_UNLOCK 1 /* perform hw unlock first */ -#endif /* SCB9328_FLASH_32M */ - -/* This should be defined if CFI FLASH device is present. Actually benefit - is not so clear to me. In other words we can provide more informations - to user, but this expects more complex flash handling we do not provide - now.*/ -#undef CONFIG_SYS_FLASH_CFI - -#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Erase operation */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Write operation */ - -#define CONFIG_SYS_FLASH_BASE SCB9328_FLASH_BASE - -/* - * This is setting for JFFS2 support in u-boot. - * Right now there is no gain for user, but later on booting kernel might be - * possible. Consider using XIP kernel running from flash to save RAM - * footprint. - * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. - */ -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 5 -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 - -/* - * Environment setup. Definitions of monitor location and size with - * definition of environment setup ends up in 2 possibilities. - * 1. Embeded environment - in u-boot code is space for environment - * 2. Environment is read from predefined sector of flash - * Right now we support 2. possiblity, but expecting no env placed - * on mentioned address right now. This also needs to provide whole - * sector for it - for us 256Kb is really waste of memory. U-boot uses - * default env. and until kernel parameters could be sent to kernel - * env. has no sense to us. - */ - -/* Setup for PA23 which is Reset Default PA23 but has to become - CS5 */ - -#define CONFIG_SYS_GPR_A_VAL 0x00800000 -#define CONFIG_SYS_GIUS_A_VAL 0x0043fffe - -#define CONFIG_SYS_MONITOR_BASE 0x10000000 -#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x10020000 /* absolute address for now */ -#define CONFIG_ENV_SIZE 0x20000 - -#define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */ - -/* - * CSxU_VAL: - * 63| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x|32 - * |DTACK_SEL|0|BCD | BCS | PSZ|PME|SYNC| DOL | CNC| WSC | 0| WWS | EDC | - * - * CSxL_VAL: - * 31| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x| 0 - * | OEA | OEN | WEA | WEN | CSA |EBC| DSZ | 0|SP|0|WP| 0 0|PA|CSEN| - */ - -#define CONFIG_SYS_CS0U_VAL 0x000F2000 -#define CONFIG_SYS_CS0L_VAL 0x11110d01 -#define CONFIG_SYS_CS1U_VAL 0x000F0a00 -#define CONFIG_SYS_CS1L_VAL 0x11110601 -#define CONFIG_SYS_CS2U_VAL 0x0 -#define CONFIG_SYS_CS2L_VAL 0x0 - -#define CONFIG_SYS_CS3U_VAL 0x000FFFFF -#define CONFIG_SYS_CS3L_VAL 0x00000303 - -#define CONFIG_SYS_CS4U_VAL 0x000F0a00 -#define CONFIG_SYS_CS4L_VAL 0x11110301 - -/* CNC == 3 too long - #define CONFIG_SYS_CS5U_VAL 0x0000C210 */ - -/* #define CONFIG_SYS_CS5U_VAL 0x00008400 - mal laenger mahcen, ob der bei 150MHz laenger haelt dann und - kaum langsamer ist */ -/* #define CONFIG_SYS_CS5U_VAL 0x00009400 - #define CONFIG_SYS_CS5L_VAL 0x11010D03 */ - -#define CONFIG_SYS_CS5U_VAL 0x00008400 -#define CONFIG_SYS_CS5L_VAL 0x00000D03 - -#define CONFIG_DRIVER_DM9000 1 -#define CONFIG_DM9000_BASE 0x16000000 -#define DM9000_IO CONFIG_DM9000_BASE -#define DM9000_DATA (CONFIG_DM9000_BASE+4) - -/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1) - f_ref=16,777MHz - - 0x002a141f: 191,9944MHz - 0x040b2007: 144MHz - 0x042a141f: 96MHz - 0x0811140d: 64MHz - 0x040e200e: 150MHz - 0x00321431: 200MHz - - 0x08001800: 64MHz mit 16er Quarz - 0x04001800: 96MHz mit 16er Quarz - 0x04002400: 144MHz mit 16er Quarz - - 31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0 - |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------| */ - -#define CPU200 - -#ifdef CPU200 -#define CONFIG_SYS_MPCTL0_VAL 0x00321431 -#else -#define CONFIG_SYS_MPCTL0_VAL 0x040e200e -#endif - -/* #define BUS64 */ -#define BUS72 - -#ifdef BUS72 -#define CONFIG_SYS_SPCTL0_VAL 0x04002400 -#endif - -#ifdef BUS96 -#define CONFIG_SYS_SPCTL0_VAL 0x04001800 -#endif - -#ifdef BUS64 -#define CONFIG_SYS_SPCTL0_VAL 0x08001800 -#endif - -/* Das ist der BCLK Divider, der aus der System PLL - BCLK und HCLK erzeugt: - 31 | xxxx xxxx xxxx xxxx xx10 11xx xxxx xxxx | 0 - 0x2f008403 : 192MHz/2=96MHz, 144MHz/2=72MHz PRESC=1->BCLKDIV=2 - 0x2f008803 : 192MHz/3=64MHz, 240MHz/3=80MHz PRESC=1->BCLKDIV=2 - 0x2f001003 : 192MHz/5=38,4MHz - 0x2f000003 : 64MHz/1 - Bit 22: SPLL Restart - Bit 21: MPLL Restart */ - -#ifdef BUS64 -#define CONFIG_SYS_CSCR_VAL 0x2f030003 -#endif - -#ifdef BUS72 -#define CONFIG_SYS_CSCR_VAL 0x2f030403 -#endif - -/* - * Well this has to be defined, but on the other hand it is used differently - * one may expect. For instance loadb command do not cares :-) - * So advice is - do not relay on this... - */ -#define CONFIG_SYS_LOAD_ADDR 0x08400000 - -#define MHZ16QUARZINUSE - -#ifdef MHZ16QUARZINUSE -#define CONFIG_SYSPLL_CLK_FREQ 16000000 -#else -#define CONFIG_SYSPLL_CLK_FREQ 16780000 -#endif - -#define CONFIG_SYS_CLK_FREQ 16780000 - -/* FMCR Bit 0 becomes 0 to make CS3 CS3 :P */ -#define CONFIG_SYS_FMCR_VAL 0x00000001 - -/* Bit[0:3] contain PERCLK1DIV for UART 1 - 0x000b00b ->b<- -> 192MHz/12=16MHz - 0x000b00b ->8<- -> 144MHz/09=16MHz - 0x000b00b ->3<- -> 64MHz/4=16MHz */ - -#ifdef BUS96 -#define CONFIG_SYS_PCDR_VAL 0x000b00b5 -#endif - -#ifdef BUS64 -#define CONFIG_SYS_PCDR_VAL 0x000b00b3 -#endif - -#ifdef BUS72 -#define CONFIG_SYS_PCDR_VAL 0x000b00b8 -#endif - -#endif /* __CONFIG_H */