X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Frut.h;h=6bddededaeb782954b1617155f310063bba56676;hp=d240d8e1d3fb92873242a12a64f9fd270705205a;hb=HEAD;hpb=a85a8e63c5cf8ccb3905eb5982bf8bdcb2978557

diff --git a/include/configs/rut.h b/include/configs/rut.h
index d240d8e..4002bc4 100644
--- a/include/configs/rut.h
+++ b/include/configs/rut.h
@@ -13,34 +13,28 @@
 #ifndef __CONFIG_RUT_H
 #define __CONFIG_RUT_H
 
-#define CONFIG_SIEMENS_MACH_TYPE	MACH_TYPE_RUT
-
 #include "siemens-am33x-common.h"
 
 #define RUT_IOCTRL_VAL	0x18b
 #define DDR_PLL_FREQ	303
 
  /* Physical Memory Map */
-#define CONFIG_MAX_RAM_BANK_SIZE	(256 << 20) /* 256 MiB */
-
-#define CONFIG_FACTORYSET
+#define CFG_MAX_RAM_BANK_SIZE	(256 << 20) /* 256 MiB */
 
 /* Watchdog */
 #define WATCHDOG_TRIGGER_GPIO	14
 
-#ifndef CONFIG_SPL_BUILD
-
 /* Use common default */
 
 /* Default env settings */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
 	"hostname=rut\0" \
 	"ubi_off=2048\0"\
 	"nand_img_size=0x500000\0" \
 	"splashpos=m,m\0" \
 	"optargs=fixrtc --no-log consoleblank=0 \0" \
-	CONFIG_ENV_SETTINGS_V1 \
-	CONFIG_ENV_SETTINGS_NAND_V1 \
+	CFG_ENV_SETTINGS_V1 \
+	CFG_ENV_SETTINGS_NAND_V1 \
 	"mmc_dev=0\0" \
 	"mmc_root=/dev/mmcblk0p2 rw\0" \
 	"mmc_root_fs_type=ext4 rootwait\0" \
@@ -63,49 +57,4 @@
 		"bootm ${kloadaddr}\0" \
 	""
 
-#ifndef CONFIG_RESTORE_FLASH
-/* set to negative value for no autoboot */
-
-#define CONFIG_BOOTCOMMAND \
-	"if mmc rescan; then " \
-		"echo SD/MMC found on device ${mmc_dev};" \
-		"if run loadbootenv; then " \
-			"echo Loaded environment from ${bootenv};" \
-			"run importbootenv;" \
-		"fi;" \
-		"if test -n $uenvcmd; then " \
-			"echo Running uenvcmd ...;" \
-			"run uenvcmd;" \
-		"fi;" \
-		"if run mmc_load_uimage; then " \
-			"run mmc_args;" \
-			"bootm ${kloadaddr};" \
-		"fi;" \
-	"fi;" \
-	"run nand_boot;" \
-	"reset;"
-
-#else
-
-#define CONFIG_BOOTCOMMAND			\
-	"setenv autoload no; "			\
-	"dhcp; "				\
-	"if tftp 80000000 debrick.scr; then "	\
-		"source 80000000; "		\
-	"fi"
-#endif
-
-#endif /* CONFIG_SPL_BUILD */
-
-#if defined(CONFIG_VIDEO)
-#define CONFIG_VIDEO_DA8XX
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#define DA8XX_LCD_CNTL_BASE	LCD_CNTL_BASE
-
-#define BOARD_LCD_RESET		115	/* Bank 3 pin 19 */
-#define CONFIG_FORMIKE
-#define DISPL_PLL_SPREAD_SPECTRUM
-#endif
-
 #endif	/* ! __CONFIG_RUT_H */