X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fpogo_e02.h;h=a81d452194d5ee1e8fb77f8b99c8a66143ab5215;hp=f94e74f0fc69177590df3d4bc66462c557de23a1;hb=HEAD;hpb=c2774e6149a6bedb0941deefec84665119e685a4

diff --git a/include/configs/pogo_e02.h b/include/configs/pogo_e02.h
index f94e74f..b135421 100644
--- a/include/configs/pogo_e02.h
+++ b/include/configs/pogo_e02.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2012
  * David Purdy <david.c.purdy@gmail.com>
@@ -6,82 +7,20 @@
  * (C) Copyright 2009
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_POGO_E02_H
 #define _CONFIG_POGO_E02_H
 
-/*
- * Machine type definition and ID
- */
-#define CONFIG_MACH_TYPE		MACH_TYPE_POGO_E02
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
-#define CONFIG_KW88F6281		/* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-
-/*
- * Commands configuration
- */
-#define CONFIG_SYS_MVFS
-#define CONFIG_CMD_NAND
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
 #include "mv-common.h"
 
 /*
- *  Environment variables configurations
- */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_SECT_SIZE		0x20000	/* 128K */
-#else
-#define CONFIG_ENV_IS_NOWHERE
-#endif
-
-#define CONFIG_ENV_SIZE			0x20000	/* 128k */
-#define CONFIG_ENV_OFFSET		0x60000	/* env starts here */
-
-/*
  * Default environment variables
  */
-#define CONFIG_BOOTCOMMAND \
-	"setenv bootargs $(bootargs_console); " \
-	"run bootcmd_usb; " \
-	"bootm 0x00800000 0x01100000"
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \
-	"32M(rootfs),-(data)\0"\
-	"mtdids=nand0=orion_nand\0"\
+#define CFG_EXTRA_ENV_SETTINGS \
 	"bootargs_console=console=ttyS0,115200\0" \
 	"bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /uImage; " \
 	"ext2load usb 0:1 0x01100000 /uInitrd\0"
 
-/*
- * Ethernet Driver configuration
- */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR	0
-#endif /* CONFIG_CMD_NET */
-
-/*
- * File system
- */
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_LZO
-
 #endif /* _CONFIG_POGO_E02_H */