X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fopenrd.h;h=8fab6e63e3b5d3873832656da86a1f4ecd6db898;hp=89e963d5245273184ca71e282700860901ce94b3;hb=HEAD;hpb=380e86f361e4e2aef83295972863654fde157560

diff --git a/include/configs/openrd.h b/include/configs/openrd.h
index 89e963d..1e6b16b 100644
--- a/include/configs/openrd.h
+++ b/include/configs/openrd.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2009
  * Net Insight <www.netinsight.net>
@@ -7,104 +8,29 @@
  * (C) Copyright 2009
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_OPENRD_H
 #define _CONFIG_OPENRD_H
 
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_SHEEVA_88SV131	1	/* CPU Core subversion */
-#define CONFIG_KW88F6281	1	/* SOC Name */
-#define CONFIG_MACH_OPENRD_BASE	/* Machine type */
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-
-/*
- * Commands configuration
- */
-#define CONFIG_SYS_MVFS
-#define CONFIG_CMD_NAND
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
 #include "mv-common.h"
 
 /*
  *  Environment variables configurations
  */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_ENV_IS_IN_NAND		1
-#define CONFIG_ENV_SECT_SIZE		0x20000	/* 128K */
-#else
-#define CONFIG_ENV_IS_NOWHERE		1	/* if env in SDRAM */
-#endif
 /*
  * max 4k env size is enough, but in case of nand
  * it has to be rounded to sector size
  */
-#define CONFIG_ENV_SIZE			0x20000	/* 128k */
-#define CONFIG_ENV_ADDR			0x60000
-#define CONFIG_ENV_OFFSET		0x60000	/* env starts here */
-/*
- * Environment is right behind U-Boot in flash. Make sure U-Boot
- * doesn't grow into the environment area.
- */
-#define CONFIG_BOARD_SIZE_LIMIT		CONFIG_ENV_OFFSET
 
 /*
  * Default environment variables
  */
-#define CONFIG_BOOTCOMMAND		"${x_bootcmd_kernel}; "	\
-	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
-	"${x_bootcmd_usb}; bootm 0x6400000;"
-
-#define MTDIDS_DEFAULT		"nand0=nand_mtd"
-#define MTDPARTS_DEFAULT	"mtdparts=nand_mtd:0x100000@0x000000(uboot),"\
-	"0x400000@0x100000(uImage),"\
-	"0x1fb00000@0x500000(rootfs)"
 
-#define CONFIG_EXTRA_ENV_SETTINGS	"x_bootargs=console"		\
-	"=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0"		\
+#define CFG_EXTRA_ENV_SETTINGS	"x_bootargs=console=ttyS0,115200 " \
+	CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \
 	"x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0"	\
 	"x_bootcmd_usb=usb start\0"					\
-	"x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"		\
-	"mtdids="MTDIDS_DEFAULT"\0"					\
-	"mtdparts="MTDPARTS_DEFAULT"\0"
-
-/*
- * Ethernet Driver configuration
- */
-#ifdef CONFIG_CMD_NET
-# ifdef CONFIG_BOARD_IS_OPENRD_BASE
-#  define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
-# else
-#  define CONFIG_MVGBE_PORTS	{1, 1}	/* enable both ports */
-# endif
-# ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
-#  define CONFIG_PHY_BASE_ADR	0x0
-#  define PHY_NO		"88E1121"
-# else
-#  define CONFIG_PHY_BASE_ADR	0x8
-#  define PHY_NO		"88E1116"
-# endif
-#endif /* CONFIG_CMD_NET */
-
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET	MV_SATA_PORT1_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MVEBU_MMC
-#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
-#endif /* CONFIG_CMD_MMC */
+	"x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"
 
 #endif /* _CONFIG_OPENRD_BASE_H */