X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fo2dnt-common.h;h=133dc6f8cd137c93c5d09f9bd34dc8816495fcac;hp=73a44a79e5cc925f0e1590a1646d85df3f6c520d;hb=HEAD;hpb=88033d737d9f46e7eebda6a8f9770957eb9aae9c

diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h
deleted file mode 100644
index 73a44a7..0000000
--- a/include/configs/o2dnt-common.h
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- *  Common configuration options for ifm camera boards
- *
- * (C) Copyright 2005
- * Sebastien Cazaux, ifm electronic gmbh
- *
- * (C) Copyright 2012
- * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __O2D_CONFIG_H
-#define __O2D_CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_MPC5200
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* running at 33.000000MHz */
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-/* log base 2 of the above value */
-#define CONFIG_SYS_CACHELINE_SHIFT	5
-#endif
-
-/*
-#define CONFIG_POST	(CONFIG_SYS_POST_MEMORY | \
-			 CONFIG_SYS_POST_I2C)
-*/
-
-#ifdef CONFIG_POST
-/* preserve space for the post_word at end of on-chip SRAM */
-#define MPC5XXX_SRAM_POST_SIZE	(MPC5XXX_SRAM_SIZE - 4)
-#endif
-
-/*
- * Serial console configuration
- */
-#define CONFIG_PSC_CONSOLE	5	/* console is on PSC5 */
-#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
-#define CONFIG_SYS_BAUDRATE_TABLE \
-	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/*
- * PCI Mapping:
- * 0x40000000 - 0x4fffffff - PCI Memory
- * 0x50000000 - 0x50ffffff - PCI IO Space
- */
-#undef CONFIG_PCI
-#define CONFIG_PCI_PNP		1
-
-#define CONFIG_PCI_MEM_BUS	0x40000000
-#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
-#define CONFIG_PCI_MEM_SIZE	0x10000000
-
-#define CONFIG_PCI_IO_BUS	0x50000000
-#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
-#define CONFIG_PCI_IO_SIZE	0x01000000
-
-#define CONFIG_SYS_XLB_PIPELINING	1
-
-/* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-
-#define CONFIG_TIMESTAMP	/* Print image info with timestamp */
-
-#define CONFIG_SYS_ALT_MEMTEST	/* Much more complex memory test */
-
-/*
- * Supported commands
- */
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#endif
-#ifdef CONFIG_POST
-#define CONFIG_CMD_DIAG
-#endif
-
-#if (CONFIG_SYS_TEXT_BASE == 0xFC000000) || (CONFIG_SYS_TEXT_BASE == 0xFF000000)
-/* Boot low with 16 or 32 MB Flash */
-#define CONFIG_SYS_LOWBOOT	1
-#elif (CONFIG_SYS_TEXT_BASE != 0x00100000)
-#error "CONFIG_SYS_TEXT_BASE value is invalid"
-#endif
-
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
-
-#define CONFIG_PREBOOT	"run master"
-
-#undef	CONFIG_BOOTARGS
-
-#if !defined(CONFIG_CONSOLE_DEV)
-#define CONFIG_CONSOLE_DEV	"ttyPSC1"
-#endif
-
-/*
- * Default environment for booting old and new kernel versions
- */
-#define CONFIG_IFM_DEFAULT_ENV_OLD					\
-	"flash_self_old=run ramargs addip addmem;"			\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"flash_nfs_old=run nfsargs addip addmem;"			\
-		"bootm ${kernel_addr}\0"				\
-	"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};"		\
-		"run nfsargs addip addmem;"				\
-		"bootm ${kernel_addr_r}\0"
-
-#define CONFIG_IFM_DEFAULT_ENV_NEW					\
-	"fdt_addr_r=900000\0"						\
-	"fdt_file="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME".dtb\0"	\
-	"flash_self=run ramargs addip addtty addmisc;"			\
-		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
-	"flash_nfs=run nfsargs addip addtty addmisc;"			\
-		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
-		"tftp ${fdt_addr_r} ${fdt_file}; "			\
-		"run nfsargs addip addtty addmisc;"			\
-		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
-
-#define	CONFIG_IFM_DEFAULT_ENV_SETTINGS					\
-	"IOpin=0x64\0"							\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addmem=setenv bootargs ${bootargs} ${memlimit}\0"		\
-	"addmisc=sete bootargs ${bootargs} ${miscargs}\0"		\
-	"addtty=sete bootargs ${bootargs} console="			\
-		CONFIG_CONSOLE_DEV ",${baudrate}\0"			\
-	"bootfile="CONFIG_BOARD_NAME"/uImage_"CONFIG_BOARD_NAME"_act\0"	\
-	"kernel_addr_r=600000\0"					\
-	"initrd_high=0x03e00000\0"					\
-	"memlimit=mem="CONFIG_BOARD_MEM_LIMIT"M\0"			\
-	"memtest=mtest 0x00100000 "__stringify(CONFIG_SYS_MEMTEST_END)" 0 1\0" \
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"linuxname="CONFIG_BOARD_NAME"/uImage_"CONFIG_BOARD_NAME"_act\0"\
-	"progLinux=tftp 200000 ${linuxname};erase ${linbot} ${lintop};" \
-		"cp.b ${fileaddr} ${linbot} ${filesize}\0"		\
-	"ramname="CONFIG_BOARD_NAME"/uRamdisk_"CONFIG_BOARD_NAME"_act\0"\
-	"progRam=tftp 200000 ${ramname};erase ${rambot} ${ramtop};"	\
-		"cp.b ${fileaddr} ${rambot} ${filesize}\0"		\
-	"jffname="CONFIG_BOARD_NAME"/uJFFS2_"CONFIG_BOARD_NAME"_act\0"	\
-	"progJff=tftp 200000 ${jffname};erase ${jffbot} ${jfftop};"	\
-		"cp.b ${fileaddr} ${jffbot} ${filesize}\0"		\
-	"rootpath=/opt/eldk/ppc_6xx\0"					\
-	"uboname=" CONFIG_BOARD_NAME					\
-		"/u-boot.bin_" CONFIG_BOARD_NAME "_act\0"		\
-	"progubo=tftp 200000 ${uboname};"				\
-		"protect off ${ubobot} ${ubotop};"			\
-		"erase ${ubobot} ${ubotop};"				\
-		"cp.b ${fileaddr} ${ubobot} ${filesize}\0"		\
-	"unlock=yes\0"							\
-	"post=echo !!! "CONFIG_BOARD_NAME" POWER ON SELF TEST !!!;"	\
-		"setenv bootdelay 1;"					\
-		"crc32 "__stringify(CONFIG_SYS_TEXT_BASE)" "		\
-			BOARD_POST_CRC32_END";"				\
-		"setenv bootcmd "CONFIG_BOARD_BOOTCMD";saveenv;reset\0"
-
-#define CONFIG_BOOTCOMMAND	"run post"
-
-/*
- * IPB Bus clocking configuration.
- */
-#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
-
-#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
-/*
- * PCI Bus clocking configuration
- *
- * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
- * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
- */
-#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
-#endif
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C			1	/* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE		1	/* Select I2C module #1 or #2 */
-#define CONFIG_SYS_I2C_SPEED		100000	/* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-/*
- * EEPROM configuration:
- *
- * O2DNT board is equiped with Ramtron FRAM device FM24CL16
- * 16 Kib Ferroelectric Nonvolatile serial RAM memory
- * organized as 2048 x 8 bits and addressable as eight I2C devices
- * 0x50 ... 0x57 each 256 bytes in size
- *
- */
-#define CONFIG_SYS_I2C_FRAM
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-/*
- * There is no write delay with FRAM, write operations are performed at bus
- * speed. Thus, no status polling or write delay is needed.
- */
-
-/*
- * Flash configuration
- */
-#define CONFIG_SYS_FLASH_CFI		1
-#define CONFIG_FLASH_CFI_DRIVER		1
-#define CONFIG_FLASH_16BIT
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-#define CONFIG_SYS_FLASH_CFI_AMD_RESET
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks */
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Erase Timeout (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Write Timeout (in ms) */
-/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000
-/* "Real" (hardware) sectors protection */
-#define CONFIG_SYS_FLASH_PROTECTION
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SIZE		0x20000
-#define CONFIG_ENV_SECT_SIZE	0x20000
-#define CONFIG_ENV_OVERWRITE	1
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00040000)
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR		0xF0000000
-#define CONFIG_SYS_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
-
-/* Use SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
-#ifdef CONFIG_POST
-/* preserve space for the post_word at end of on-chip SRAM */
-#define CONFIG_SYS_INIT_RAM_END		MPC5XXX_SRAM_POST_SIZE
-#else
-/* End of used area in DPRAM */
-#define CONFIG_SYS_INIT_RAM_END		MPC5XXX_SRAM_SIZE
-#endif
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
-					 GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN		(192 << 10) /* 192 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10) /* 128 kB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)   /* Initial map for Linux */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT		1
-#endif
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC5xxx_FEC
-#define CONFIG_MPC5xxx_FEC_MII100
-#define CONFIG_PHY_ADDR			0x00
-#define CONFIG_RESET_PHY_R
-
-/*
- * GPIO configuration
- */
-#define CONFIG_SYS_GPIO_DATADIR		0x00000064 /* PSC1_2, PSC2_1,2 output */
-#define CONFIG_SYS_GPIO_OPENDRAIN	0x00000000 /* No open drain */
-#define CONFIG_SYS_GPIO_DATAVALUE	0x00000000 /* PSC1_1 to 1, rest to 0 */
-#define CONFIG_SYS_GPIO_ENABLE		0x00000064 /* PSC1_2, PSC2_1,2 enable */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_HUSH_PARSER
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
-#endif
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					 sizeof(CONFIG_SYS_PROMPT) + 16)
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS		16
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR		0x100000
-
-/* decrementer freq: 1 ms ticks */
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL		HID0_ICE
-
-#define CONFIG_SYS_BOOTCS_START		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
-#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
-
-#define CONFIG_BOARD_EARLY_INIT_R
-
-#define CONFIG_SYS_CS_BURST		0x00000000
-#define CONFIG_SYS_CS_DEADCYCLE		0x33333333
-
-/*
- * DT support
- */
-#define OF_CPU			"PowerPC,5200@0"
-#define OF_SOC			"soc5200@f0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-
-#endif /* __O2D_CONFIG_H */