X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fmotionpro.h;h=e8b05932a13a847ee329181292c11927b6521262;hp=62919e9cf921854e1f89e109849191ea35dc4f37;hb=HEAD;hpb=89cb2b5f8be4f6d04bd87220aa8f72eb0850edc4

diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
deleted file mode 100644
index 62919e9..0000000
--- a/include/configs/motionpro.h
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- * (C) Copyright 2003-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Based on Motion-PRO board config file by Robert McCullough, rob@promessinc.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-
-/* CPU and board */
-#define CONFIG_MPC5200		1	/* This is a MPC5200 CPU */
-#define CONFIG_MOTIONPRO	1	/* ... on Promess Motion-PRO board */
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_HIGH_BATS	1	/* High BATs supported */
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_REGINFO
-
-/*
- * Serial console configuration
- */
-#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
-#define CONFIG_NETCONSOLE	1	/* network console */
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC5xxx_FEC	1
-#define CONFIG_MPC5xxx_FEC_MII100
-#define CONFIG_PHY_ADDR		0x2
-#define CONFIG_PHY_TYPE		0x79c874
-#define CONFIG_RESET_PHY_R	1
-
-/*
- * Autobooting
- */
-#define CONFIG_BOOTDELAY	2	/* autoboot after 2 seconds */
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_CMDLINE_EDITING		1	/* add command line history	*/
-
-#define CONFIG_VERSION_VARIABLE	1	/* include version env variable */
-
-/*
- * Default environment settings
- */
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"hostname=motionpro\0"						\
-	"netmask=255.255.255.0\0"					\
-	"ipaddr=192.168.1.106\0"					\
-	"serverip=192.168.1.100\0"					\
-	"gatewayip=192.168.1.100\0"					\
-	"console=ttyPSC0,115200\0"					\
-	"u-boot_addr=400000\0"						\
-	"kernel_addr=400000\0"						\
-	"fdt_addr=700000\0"						\
-	"ramdisk_addr=800000\0"						\
-	"multi_image_addr=800000\0"					\
-	"rootpath=/opt/eldk-4.2/ppc_6xx\0"				\
-	"u-boot=/tftpboot/motionpro/u-boot.bin\0"			\
-	"bootfile=/tftpboot/motionpro/uImage\0"				\
-	"fdt_file=/tftpboot/motionpro/motionpro.dtb\0"			\
-	"ramdisk_file=/tftpboot/motionpro/uRamdisk\0"			\
-	"multi_image_file=kernel+initrd+dtb.img\0"			\
-	"load=tftp ${u-boot_addr} ${u-boot}\0"				\
-	"update=prot off fff00000 +${filesize};"			\
-		"era fff00000 +${filesize}; "				\
-		"cp.b ${u-boot_addr} fff00000 ${filesize};"		\
-		"prot on fff00000 +${filesize}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"fat_args=setenv bootargs root=/dev/sda rw\0"			\
-	"mtdids=nor0=ff000000.flash\0"					\
-	"mtdparts=ff000000.flash:13m(fs),2m(kernel),384k(uboot)," 	\
-				"128k(env),128k(redund_env),"	  	\
-				"128k(dtb),128k(user_data)\0"		\
-	"addcons=setenv bootargs ${bootargs} console=${console}\0"	\
-	"addmtd=setenv bootargs ${bootargs} mtdparts=${mtdparts}\0"	\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
-		"${netmask}:${hostname}:${netdev}:off panic=1 "		\
-		"console=${console}\0"					\
-	"net_nfs=tftp ${kernel_addr} ${bootfile}; "			\
-		"tftp ${fdt_addr} ${fdt_file}; "			\
-		"run nfsargs addip addmtd; "				\
-		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
-	"net_self=tftp ${kernel_addr} ${bootfile}; "			\
-		"tftp ${fdt_addr} ${fdt_file}; "			\
-		"tftp ${ramdisk_addr} ${ramdisk_file}; "		\
-		"nfs ${ramdisk_addr} ${serverip}:${rootpath}/images/uRamdisk; "	\
-		"run ramargs addip addcons addmtd; "			\
-		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
-	"fat_multi=run fat_args addip addmtd; fatload ide 0:1 "		\
-		"${multi_image_addr} ${multi_image_file}; "		\
-		"bootm ${multi_image_addr}\0"				\
-	""
-#define CONFIG_BOOTCOMMAND	"run fat_multi"
-
-/*
- * do board-specific init
- */
-#define CONFIG_BOARD_EARLY_INIT_R	1
-
-/*
- * Low level configuration
- */
-
-/*
- * Clock configuration: SYS_XTALIN = 33MHz
- */
-#define CONFIG_SYS_MPC5XXX_CLKIN	33000000
-
-/*
- * Set IPB speed to 100MHz
- */
-#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK
-
-/*
- * Memory map
- */
-/*
- * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000.
- * Setting MBAR to otherwise will cause system hang when using SmartDMA such
- * as network commands.
- */
-#define CONFIG_SYS_MBAR			0xf0000000
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-
-/*
- * If building for running out of SDRAM, then MBAR has been set up beforehand
- * (e.g., by the BDI). Otherwise we must specify the default boot-up value of
- * MBAR, as given in the doccumentation.
- */
-#if CONFIG_SYS_TEXT_BASE == 0x00100000
-#define CONFIG_SYS_DEFAULT_MBAR	0xf0000000
-#else /* CONFIG_SYS_TEXT_BASE != 0x00100000 */
-#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
-#define CONFIG_SYS_LOWBOOT		1
-#endif /* CONFIG_SYS_TEXT_BASE == 0x00100000 */
-
-/* Use SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_SIZE
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT		1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* 384 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN		(1024 << 10)	/* 1 MiB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* initial mem map for Linux */
-
-/*
- * Chip selects configuration
- */
-/* Boot Chipselect */
-#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
-#define CONFIG_SYS_BOOTCS_CFG		0x00045D00
-
-/* Flash memory addressing */
-#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
-#define CONFIG_SYS_CS0_CFG		CONFIG_SYS_BOOTCS_CFG
-
-/* Dual Port SRAM -- Kollmorgen Drive memory addressing */
-#define CONFIG_SYS_CS1_START		0x50000000
-#define CONFIG_SYS_CS1_SIZE		0x10000
-#define CONFIG_SYS_CS1_CFG		0x05055800
-
-/* Local register access */
-#define CONFIG_SYS_CS2_START		0x50010000
-#define CONFIG_SYS_CS2_SIZE		0x10000
-#define CONFIG_SYS_CS2_CFG		0x05055800
-
-/* Anybus CompactCom Module memory addressing */
-#define CONFIG_SYS_CS3_START		0x50020000
-#define CONFIG_SYS_CS3_SIZE		0x10000
-#define CONFIG_SYS_CS3_CFG		0x05055800
-
-/* No burst and dead cycle = 2 for all CSs */
-#define CONFIG_SYS_CS_BURST		0x00000000
-#define CONFIG_SYS_CS_DEADCYCLE	0x22222222
-
-/*
- * SDRAM configuration
- */
-/* 2 x MT48LC16M16A2BG-75 IT:D, CASL 3, 32 bit data bus */
-#define SDRAM_CONFIG1		0x62322900
-#define SDRAM_CONFIG2		0x88c70000
-#define SDRAM_CONTROL		0x504f0000
-#define SDRAM_MODE		0x00cd0000
-
-/*
- * Flash configuration
- */
-#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER	1
-#define CONFIG_SYS_FLASH_BASE		0xff000000
-#define CONFIG_SYS_FLASH_SIZE		0x01000000
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks */
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
-#define CONFIG_FLASH_16BIT		/* Flash is 16-bit */
-
-/*
- * MTD configuration
- */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT		"nor0=motionpro-0"
-#define MTDPARTS_DEFAULT	"mtdparts=motionpro-0:"			  \
-					"13m(fs),2m(kernel),384k(uboot)," \
-					"128k(env),128k(redund_env),"	  \
-					"128k(dtb),-(user_data)"
-
-/*
- * IDE/ATA configuration
- */
-#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
-#define CONFIG_SYS_IDE_MAXBUS		1
-#define CONFIG_SYS_IDE_MAXDEVICE	1
-#define CONFIG_IDE_PREINIT
-
-#define CONFIG_SYS_ATA_DATA_OFFSET	0x0060
-#define CONFIG_SYS_ATA_REG_OFFSET	CONFIG_SYS_ATA_DATA_OFFSET
-#define CONFIG_SYS_ATA_STRIDE		4
-#define CONFIG_DOS_PARTITION
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE		2	/* select I2C module #2 */
-#define CONFIG_SYS_I2C_SPEED		100000	/* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	1	/* 2 bytes per write cycle */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5	/* 2ms/cycle + 3ms extra */
-
-/*
- * RTC configuration
- */
-#define CONFIG_RTC_DS1337	1
-#define CONFIG_SYS_I2C_RTC_ADDR	0x68
-
-/*
- * Status LED configuration
- */
-#define CONFIG_STATUS_LED		/* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED
-
-#define ENABLE_GPIO_OUT		0x00000024
-#define LED_ON			0x00000010
-
-#ifndef __ASSEMBLY__
-/*
- * In case of Motion-PRO, a LED is identified by its corresponding
- * GPT Enable and Mode Select Register.
- */
-typedef volatile unsigned long * led_id_t;
-
-extern void __led_init(led_id_t id, int state);
-extern void __led_toggle(led_id_t id);
-extern void __led_set(led_id_t id, int state);
-#endif /* __ASSEMBLY__ */
-
-/*
- * Temperature sensor
- */
-#define CONFIG_DTT_LM75		1
-#define CONFIG_DTT_SENSORS	{ 0x49 }
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-/* This has to be a multiple of the Flash sector size */
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SIZE		0x1000
-#define CONFIG_ENV_SECT_SIZE	0x20000
-
-/* Configuration of redundant environment */
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
-
-/*
- * Pin multiplexing configuration
- */
-
-/* PSC1: UART1
- * PSC2: GPIO (default)
- * PSC3: GPIO (default)
- * USB: 2xUART4/5
- * Ethernet: Ethernet 100Mbit with MD
- * Timer: CAN2/GPIO
- * PSC6/IRDA: GPIO (default)
- */
-#define CONFIG_SYS_GPS_PORT_CONFIG	0x1105a004
-
-/*
- * Motion-PRO's CPLD revision control register
- */
-#define CPLD_REV_REGISTER	(CONFIG_SYS_CS2_START + 0x06)
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory    */
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x03e00000	/* 1 ... 62 MiB in DRAM */
-#define CONFIG_SYS_ALT_MEMTEST
-
-#define CONFIG_SYS_LOAD_ADDR		0x200000	/* default kernel load addr */
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL		HID0_ICE
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-
-/* Not needed for MPC 5xxx U-Boot, but used by tools/updater */
-#define CONFIG_SYS_RESET_ADDRESS	0xfff00100
-
-#define OF_CPU			"PowerPC,5200@0"
-#define OF_SOC			"soc5200@f0000000"
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH		"/soc5200@f0000000/serial@2000"
-
-#endif /* __CONFIG_H */