X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fmeesc.h;h=86ce5f2397e0d515dee632b2e93bac9c78d029db;hp=6b2296788dc7ac46956eb6fcd4b566eacfb47feb;hb=HEAD;hpb=52af0101be55da74a32e9b169864508101f886fe

diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index 6b22967..38da55c 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -21,15 +21,15 @@
 #include <asm/hardware.h>
 
 /*
- * Warning: changing CONFIG_SYS_TEXT_BASE requires
+ * Warning: changing CONFIG_TEXT_BASE requires
  * adapting the initial boot program.
  * Since the linker has to swallow that define, we must use a pure
  * hex number here!
  */
 
 /* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK	32768	/* 32.768 kHz crystal */
-#define CONFIG_SYS_AT91_MAIN_CLOCK	16000000/* 16.0 MHz crystal */
+#define CFG_SYS_AT91_SLOW_CLOCK	32768	/* 32.768 kHz crystal */
+#define CFG_SYS_AT91_MAIN_CLOCK	16000000/* 16.0 MHz crystal */
 
 /* Misc CPU related */
 
@@ -44,24 +44,22 @@
 #define PHYS_SDRAM					ATMEL_BASE_CS1 /* 0x20000000 */
 #define PHYS_SDRAM_SIZE				0x02000000     /* 32 MByte */
 
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
-#define CONFIG_SYS_SDRAM_SIZE		PHYS_SDRAM_SIZE
+#define CFG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CFG_SYS_SDRAM_SIZE		PHYS_SDRAM_SIZE
 
-#define CONFIG_SYS_INIT_RAM_ADDR	ATMEL_BASE_SRAM0
-#define CONFIG_SYS_INIT_RAM_SIZE	(16 * 1024)
+#define CFG_SYS_INIT_RAM_ADDR	ATMEL_BASE_SRAM0
+#define CFG_SYS_INIT_RAM_SIZE	(16 * 1024)
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-# define CONFIG_SYS_MAX_NAND_DEVICE		1
-# define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3 /* 0x40000000 */
-# define CONFIG_SYS_NAND_DBW_8
-# define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
-# define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
-# define CONFIG_SYS_NAND_ENABLE_PIN		GPIO_PIN_PD(15)
-# define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PA(22)
+# define CFG_SYS_NAND_BASE			ATMEL_BASE_CS3 /* 0x40000000 */
+# define CFG_SYS_NAND_MASK_ALE		(1 << 21)
+# define CFG_SYS_NAND_MASK_CLE		(1 << 22)
+# define CFG_SYS_NAND_ENABLE_PIN		GPIO_PIN_PD(15)
+# define CFG_SYS_NAND_READY_PIN		GPIO_PIN_PA(22)
 #endif
 
 /* hw-controller addresses */
-#define CONFIG_ET1100_BASE		0x70000000
+#define CFG_ET1100_BASE		0x70000000
 
 #endif