X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fgplugd.h;h=404c56af104539bf7b77c65c2110b9fcf309dfd5;hp=357196b77cb3a833865a44d88886422e0e342d30;hb=HEAD;hpb=719afeb0b3c60af82f701f122978b935aa6a5217

diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h
deleted file mode 100644
index 357196b..0000000
--- a/include/configs/gplugd.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011
- * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <contact@8051projects.net>
- *
- * Based on Aspenite:
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- * Contributor: Mahavir Jain <mjain@marvell.com>
- */
-
-#ifndef __CONFIG_GPLUGD_H
-#define __CONFIG_GPLUGD_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_SHEEVA_88SV331xV5	1	/* CPU Core subversion */
-#define CONFIG_ARMADA100		1	/* SOC Family Name */
-#define CONFIG_ARMADA168		1	/* SOC Used on this Board */
-#define CONFIG_MACH_TYPE		MACH_TYPE_GPLUGD /* Machine type */
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-
-/*
- * There is no internal RAM in ARMADA100, using DRAM
- * TBD: dcache to be used for this
- */
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE - 0x00200000)
-
-/*
- * Commands configuration
- */
-
-/* Disable DCACHE */
-#define CONFIG_SYS_DCACHE_OFF
-
-/* Network configuration */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_ARMADA100_FEC
-
-/* DHCP Support */
-#define CONFIG_BOOTP_DHCP_REQUEST_DELAY		50000
-#endif /* CONFIG_CMD_NET */
-
-/* GPIO Support */
-#define CONFIG_MARVELL_GPIO
-
-/* PHY configuration */
-#define CONFIG_MII
-#define CONFIG_RESET_PHY_R
-/* 88E3015 register definition */
-#define PHY_LED_PAR_SEL_REG		22
-#define PHY_LED_MAN_REG			25
-#define PHY_LED_VAL			0x5b	/* LINK LED1, ACT LED2 */
-/* GPIO Configuration for PHY */
-#define CONFIG_SYS_GPIO_PHY_RST		104	/* GPIO104 */
-
-/* Flash Support */
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
-#include "mv-common.h"
-
-#ifdef CONFIG_SYS_NS16550_COM1
-#undef CONFIG_SYS_NS16550_COM1
-#endif /* CONFIG_SYS_NS16550_COM1 */
-
-#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
-
-/*
- * Environment variables configurations
- */
-#define CONFIG_ENV_SIZE			0x4000
-
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI_ARMADA100
-#define CONFIG_EHCI_IS_TDI
-#endif /* CONFIG_CMD_USB */
-
-#endif	/* __CONFIG_GPLUGD_H */