X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fflea3.h;h=84175676c25505b3d4db84507ca5c785bfc98f25;hp=6c3b2c4bf554723012a346fa42a303976c4872cc;hb=HEAD;hpb=6eecaf5d0f6b9a500dd5798f1f2bc8296bcfe158

diff --git a/include/configs/flea3.h b/include/configs/flea3.h
deleted file mode 100644
index 6c3b2c4..0000000
--- a/include/configs/flea3.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
- *
- * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
- *
- * Configuration for the flea3 board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-
- /* High Level Configuration Options */
-#define CONFIG_MX35
-
-/* Set TEXT at the beginning of the NOR flash */
-
-/* This is required to setup the ESDC controller */
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_SPD_BUS_NUM		2 /* I2C3 */
-
-/*
- * UART (console)
- */
-#define CONFIG_MXC_UART_BASE	UART3_BASE
-
-/*
- * Command definition
- */
-
-#define CONFIG_NET_RETRY_COUNT	100
-
-/*
- * Ethernet on SOC (FEC)
- */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE	FEC_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR	0x1
-
-#define CONFIG_ARP_TIMEOUT	200UL
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_CBSIZE	512	/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	32	/* max number of command args */
-
-/*
- * Physical Memory Map
- */
-#define PHYS_SDRAM_1		CSD0_BASE_ADDR
-#define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
-
-#define CONFIG_SYS_SDRAM_BASE		CSD0_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR + 0x10000)
-#define CONFIG_SYS_INIT_RAM_SIZE		(IRAM_SIZE / 2)
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					CONFIG_SYS_GBL_DATA_OFFSET)
-
-/*
- * MTD Command for mtdparts
- */
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_BASE		CS0_BASE_ADDR
-#define CONFIG_SYS_MAX_FLASH_BANKS 1	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512	/* max number of sectors on one chip */
-/* Monitor at beginning of flash */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-
-/* Address and size of Redundant Environment Sector	*/
-
-/*
- * CFI FLASH driver setup
- */
-
-/* A non-standard buffered write algorithm */
-
-/*
- * NAND FLASH driver setup
- */
-#define CONFIG_MXC_NAND_REGS_BASE	(NFC_BASE_ADDR)
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		(NFC_BASE_ADDR)
-#define CONFIG_MXC_NAND_HWECC
-#define CONFIG_SYS_NAND_LARGEPAGE
-
-/*
- * Default environment and default scripts
- * to update uboot and load kernel
- */
-
-#define CONFIG_HOSTNAME "flea3"
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip_sta=setenv bootargs ${bootargs} "			\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
-	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
-		"else run addip_sta;fi\0"				\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"addtty=setenv bootargs ${bootargs}"				\
-		" console=ttymxc2,${baudrate}\0"			\
-	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
-	"loadaddr=80800000\0"						\
-	"kernel_addr_r=80800000\0"					\
-	"hostname=" CONFIG_HOSTNAME "\0"			\
-	"bootfile=" CONFIG_HOSTNAME "/uImage\0"		\
-	"ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0"	\
-	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr}\0"				\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
-		"run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr_r}\0"				\
-	"net_self_load=tftp ${kernel_addr_r} ${bootfile};"		\
-		"tftp ${ramdisk_addr_r} ${ramdisk_file};\0"		\
-	"net_self=if run net_self_load;then "				\
-		"run ramargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
-		"else echo Images not loades;fi\0"			\
-	"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"		\
-	"load=tftp ${loadaddr} ${u-boot}\0"				\
-	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"		\
-	"update=protect off ${uboot_addr} +80000;"			\
-		"erase ${uboot_addr} +80000;"				\
-		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
-	"upd=if run load;then echo Updating u-boot;if run update;"	\
-		"then echo U-Boot updated;"				\
-			"else echo Error updating u-boot !;"		\
-			"echo Board without bootloader !!;"		\
-		"fi;"							\
-		"else echo U-Boot not downloaded..exiting;fi\0"		\
-	"bootcmd=run net_nfs\0"
-
-#endif				/* __CONFIG_H */