X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Feb_cpu5282.h;h=426155dbdbf16cdf04172e2c51b2205c9843a382;hp=80de73d15d507fa888b78763eeacd15e4a06ea70;hb=65cc0e2a65d2c9f107b2f42db6396d9ade6c5ad8;hpb=a322afc9f9b69dd52a9bc72937cd5adc18ea55c7 diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 80de73d..426155d 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -12,7 +12,7 @@ * High Level Configuration Options (easy to change) * *----------------------------------------------------------------------*/ -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) #undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */ @@ -27,18 +27,18 @@ * Environment is in the second sector of the first 256k of flash * *----------------------------------------------------------------------*/ -/*#define CONFIG_SYS_DRAM_TEST 1 */ -#undef CONFIG_SYS_DRAM_TEST +/*#define CFG_SYS_DRAM_TEST 1 */ +#undef CFG_SYS_DRAM_TEST /*----------------------------------------------------------------------* * Clock and PLL Configuration * *----------------------------------------------------------------------*/ -#define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */ +#define CFG_SYS_CLK 80000000 /* 8MHz * 8 */ /* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */ -#define CONFIG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */ -#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */ +#define CFG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */ +#define CFG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */ /*----------------------------------------------------------------------* * Network * @@ -54,14 +54,14 @@ * You should know what you are doing if you make changes here. *-----------------------------------------------------------------------*/ -#define CONFIG_SYS_MBAR 0x40000000 +#define CFG_SYS_MBAR 0x40000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) *-----------------------------------------------------------------------*/ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 +#define CFG_SYS_INIT_RAM_ADDR 0x20000000 +#define CFG_SYS_INIT_RAM_SIZE 0x10000 /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -79,34 +79,34 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ #define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE -#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000 -#define CONFIG_SYS_INT_FLASH_ENABLE 0x21 +#define CFG_SYS_FLASH_BASE CFG_SYS_CS0_BASE +#define CFG_SYS_INT_FLASH_BASE 0xF0000000 +#define CFG_SYS_INT_FLASH_ENABLE 0x21 -#define CONFIG_SYS_FLASH_SIZE 16*1024*1024 +#define CFG_SYS_FLASH_SIZE 16*1024*1024 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE } /*----------------------------------------------------------------------- * Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) -#define CONFIG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ CF_CACR_CEIB | CF_CACR_DBWE | \ CF_CACR_EUSP) @@ -114,36 +114,36 @@ * Memory bank definitions */ -#define CONFIG_SYS_CS0_BASE 0xFF000000 -#define CONFIG_SYS_CS0_CTRL 0x00001980 -#define CONFIG_SYS_CS0_MASK 0x00FF0001 +#define CFG_SYS_CS0_BASE 0xFF000000 +#define CFG_SYS_CS0_CTRL 0x00001980 +#define CFG_SYS_CS0_MASK 0x00FF0001 -#define CONFIG_SYS_CS2_BASE 0xE0000000 -#define CONFIG_SYS_CS2_CTRL 0x00001980 -#define CONFIG_SYS_CS2_MASK 0x000F0001 +#define CFG_SYS_CS2_BASE 0xE0000000 +#define CFG_SYS_CS2_CTRL 0x00001980 +#define CFG_SYS_CS2_MASK 0x000F0001 -#define CONFIG_SYS_CS3_BASE 0xE0100000 -#define CONFIG_SYS_CS3_CTRL 0x00001980 -#define CONFIG_SYS_CS3_MASK 0x000F0001 +#define CFG_SYS_CS3_BASE 0xE0100000 +#define CFG_SYS_CS3_CTRL 0x00001980 +#define CFG_SYS_CS3_MASK 0x000F0001 /*----------------------------------------------------------------------- * Port configuration */ -#define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */ -#define CONFIG_SYS_PADDR 0x0000000 -#define CONFIG_SYS_PADAT 0x0000000 +#define CFG_SYS_PACNT 0x0000000 /* Port A D[31:24] */ +#define CFG_SYS_PADDR 0x0000000 +#define CFG_SYS_PADAT 0x0000000 -#define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */ -#define CONFIG_SYS_PBDDR 0x0000000 -#define CONFIG_SYS_PBDAT 0x0000000 +#define CFG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */ +#define CFG_SYS_PBDDR 0x0000000 +#define CFG_SYS_PBDAT 0x0000000 -#define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */ +#define CFG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */ -#define CONFIG_SYS_PASPAR 0x0F0F -#define CONFIG_SYS_PEHLPAR 0xC0 -#define CONFIG_SYS_PUAPAR 0x0F -#define CONFIG_SYS_DDRUA 0x05 -#define CONFIG_SYS_PJPAR 0xFF +#define CFG_SYS_PASPAR 0x0F0F +#define CFG_SYS_PEHLPAR 0xC0 +#define CFG_SYS_PUAPAR 0x0F +#define CFG_SYS_DDRUA 0x05 +#define CFG_SYS_PJPAR 0xFF /*----------------------------------------------------------------------- * I2C