X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fbf537-stamp.h;h=a302f839a1ec239b9d96e83d4a5b26374a717f91;hp=84ef4ed4c2878d8b7f07e89bd23511009055203d;hb=HEAD;hpb=9ba9e85f3f1cc2e7d8b387a03c50eb067d915e0a diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h deleted file mode 100644 index 84ef4ed..0000000 --- a/include/configs/bf537-stamp.h +++ /dev/null @@ -1,284 +0,0 @@ -/* - * U-boot - Configuration file for BF537 STAMP board - */ - -#ifndef __CONFIG_BF537_STAMP_H__ -#define __CONFIG_BF537_STAMP_H__ - -#include - - -/* - * Processor Settings - */ -#define CONFIG_BFIN_CPU bf537-0.2 -#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS - - -/* - * Clock Settings - * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV - * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV - */ -/* CONFIG_CLKIN_HZ is any value in Hz */ -#define CONFIG_CLKIN_HZ 25000000 -/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ -/* 1 = CLKIN / 2 */ -#define CONFIG_CLKIN_HALF 0 -/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ -/* 1 = bypass PLL */ -#define CONFIG_PLL_BYPASS 0 -/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ -/* Values can range from 0-63 (where 0 means 64) */ -#define CONFIG_VCO_MULT 20 -/* CCLK_DIV controls the core clock divider */ -/* Values can be 1, 2, 4, or 8 ONLY */ -#define CONFIG_CCLK_DIV 1 -/* SCLK_DIV controls the system clock divider */ -/* Values can range from 1-15 */ -#define CONFIG_SCLK_DIV 4 - - -/* - * Memory Settings - */ -#define CONFIG_MEM_ADD_WDTH 10 -#define CONFIG_MEM_SIZE 64 - -#define CONFIG_EBIU_SDRRC_VAL 0x306 -#define CONFIG_EBIU_SDGCTL_VAL 0x91114d - -#define CONFIG_EBIU_AMGCTL_VAL 0xFF -#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 -#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 - -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (384 * 1024) - - -/* - * Network Settings - */ -#ifndef __ADSPBF534__ -#define ADI_CMDS_NETWORK 1 -#define CONFIG_BFIN_MAC -#define CONFIG_NETCONSOLE 1 -#endif -#define CONFIG_HOSTNAME bf537-stamp - -/* - * Flash Settings - */ -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_BASE 0x20000000 -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -/* some have 67 sectors (M29W320DB), but newer have 71 (M29W320EB) */ -#define CONFIG_SYS_MAX_FLASH_SECT 71 - - -/* - * SPI Settings - */ -#define CONFIG_BFIN_SPI -#define CONFIG_ENV_SPI_MAX_HZ 30000000 -#define CONFIG_SF_DEFAULT_SPEED 30000000 -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_ALL - - -/* - * Env Storage Settings - */ -#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_OFFSET 0x10000 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#else -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_OFFSET 0x4000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x2000 -#endif -#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS) -#define ENV_IS_EMBEDDED -#else -#define CONFIG_ENV_IS_EMBEDDED_IN_LDR -#endif -#ifdef ENV_IS_EMBEDDED -/* WARNING - the following is hand-optimized to fit within - * the sector before the environment sector. If it throws - * an error during compilation remove an object here to get - * it linked after the configuration sector. - */ -# define LDS_BOARD_TEXT \ - arch/blackfin/lib/built-in.o (.text*); \ - arch/blackfin/cpu/built-in.o (.text*); \ - . = DEFINED(env_offset) ? env_offset : .; \ - common/env_embedded.o (.text*); -#endif - - -/* - * I2C Settings - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_ADI - - -/* - * SPI_MMC Settings - */ -#define CONFIG_MMC_SPI -#ifdef CONFIG_MMC_SPI -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#endif - -/* - * NAND Settings - */ -/* #define CONFIG_NAND_PLAT */ -#ifdef CONFIG_NAND_PLAT -#define CONFIG_SYS_NAND_BASE 0x20212000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) -#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1)) -#define BFIN_NAND_WRITE(addr, cmd) \ - do { \ - bfin_write8(addr, cmd); \ - SSYNC(); \ - } while (0) - -#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) -#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) -#define NAND_PLAT_GPIO_DEV_READY GPIO_PF3 -#endif /* CONFIG_NAND_PLAT */ - -/* - * CF-CARD IDE-HDD Support - */ - -/* - * Add CF flash card support in TRUE-IDE Mode (CF-IDE-NAND Card) - * Strange address mapping Blackfin A13 connects to CF_A0 - */ - -/* #define CONFIG_BFIN_TRUE_IDE */ - -/* - * Add CF flash card support in Common Memory Mode (CF-IDE-NAND Card) - * This should be the preferred mode - */ - -/* #define CONFIG_BFIN_CF_IDE */ - -/* - * Add IDE Disk Drive (HDD) support - * See example interface here: - * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:ide-blackfin - */ - -/* #define CONFIG_BFIN_HDD_IDE */ - -#if defined(CONFIG_BFIN_CF_IDE) || \ - defined(CONFIG_BFIN_HDD_IDE) || \ - defined(CONFIG_BFIN_TRUE_IDE) -# define CONFIG_BFIN_IDE 1 -# define CONFIG_CMD_IDE -#endif - -#if defined(CONFIG_BFIN_IDE) - -#define CONFIG_DOS_PARTITION 1 -/* - * IDE/ATA stuff - */ -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ -#undef CONFIG_IDE_RESET /* no reset for ide supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS * 1) - -#undef CONFIG_EBIU_AMBCTL1_VAL -#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC3FFC3 - -#define CONFIG_CF_ATASEL_DIS 0x20311800 -#define CONFIG_CF_ATASEL_ENA 0x20311802 - -#if defined(CONFIG_BFIN_TRUE_IDE) -/* - * Note that these settings aren't for the most part used in include/ata.h - * when all of the ATA registers are setup - */ -#define CONFIG_SYS_ATA_BASE_ADDR 0x2031C000 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0020 /* data I/O */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x0020 /* normal register accesses */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x001C /* alternate registers */ -#define CONFIG_SYS_ATA_STRIDE 2 /* CF.A0 --> Blackfin.A13 */ - -#elif defined(CONFIG_BFIN_CF_IDE) -#define CONFIG_SYS_ATA_BASE_ADDR 0x20211800 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* data I/O */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* normal register accesses */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x000E /* alternate registers */ -#define CONFIG_SYS_ATA_STRIDE 1 /* CF_A0=0, with /CE1 /CE2 odd/even byte selects */ - -#elif defined(CONFIG_BFIN_HDD_IDE) -#define CONFIG_SYS_ATA_BASE_ADDR 0x20314000 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0020 /* data I/O */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x0020 /* normal register accesses */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x001C /* alternate registers */ -#define CONFIG_SYS_ATA_STRIDE 2 /* CF.A0 --> Blackfin.A1 */ -#undef CONFIG_SCLK_DIV -#define CONFIG_SCLK_DIV 8 -#endif - -#endif - - -/* - * Misc Settings - */ -#define CONFIG_MISC_INIT_R -#define CONFIG_RTC_BFIN -#define CONFIG_UART_CONSOLE 0 - -/* Define if want to do post memory test */ -#undef CONFIG_POST -#ifdef CONFIG_POST -#define CONFIG_SYS_POST_HOTKEYS_GPIO GPIO_PF5 -#define CONFIG_POST_BSPEC1_GPIO_LEDS \ - GPIO_PF6, GPIO_PF7, GPIO_PF8, GPIO_PF9, GPIO_PF10, GPIO_PF11, -#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \ - GPIO_PF5, GPIO_PF4, GPIO_PF3, GPIO_PF2, -#define CONFIG_POST_BSPEC2_GPIO_NAMES \ - 10, 11, 12, 13, -#define CONFIG_SYS_POST_FLASH_START 11 -#define CONFIG_SYS_POST_FLASH_END 71 -#endif - -/* These are for board tests */ -#if 0 -#define CONFIG_BOOTCOMMAND "bootldr 0x203f0100" -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT \ - "autoboot in %d seconds: press space to stop\n", bootdelay -#define CONFIG_AUTOBOOT_STOP_STR " " -#endif - - -/* - * Pull in common ADI header for remaining command/environment setup - */ -#include - -#endif