X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fatstk1006.h;h=bbe0aea8616f9e91c4ead982228c430ed476be56;hp=25090a68fa719fe34b9e7d018d89798f443c03b6;hb=HEAD;hpb=e1cc4d31f889428a4ca73120951389c756404184

diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
deleted file mode 100644
index 25090a6..0000000
--- a/include/configs/atstk1006.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * Configuration settings for the ATSTK1002 CPU daughterboard
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/hardware.h>
-
-#define CONFIG_AT32AP
-#define CONFIG_AT32AP7000
-#define CONFIG_ATSTK1006
-#define CONFIG_ATSTK1000
-
-
-/*
- * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
- * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
- * PLL frequency.
- * (CONFIG_SYS_OSC0_HZ * CONFIG_SYS_PLL0_MUL) / CONFIG_SYS_PLL0_DIV = PLL MHz
- */
-#define CONFIG_PLL
-#define CONFIG_SYS_POWER_MANAGER
-#define CONFIG_SYS_OSC0_HZ			20000000
-#define CONFIG_SYS_PLL0_DIV			1
-#define CONFIG_SYS_PLL0_MUL			7
-#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES	16
-/*
- * Set the CPU running at:
- * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz
- */
-#define CONFIG_SYS_CLKDIV_CPU			0
-/*
- * Set the HSB running at:
- * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz
- */
-#define CONFIG_SYS_CLKDIV_HSB			1
-/*
- * Set the PBA running at:
- * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz
- */
-#define CONFIG_SYS_CLKDIV_PBA			2
-/*
- * Set the PBB running at:
- * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz
- */
-#define CONFIG_SYS_CLKDIV_PBB			1
-
-/* Reserve VM regions for SDRAM and NOR flash */
-#define CONFIG_SYS_NR_VM_REGIONS		2
-
-/*
- * The PLLOPT register controls the PLL like this:
- *   icp = PLLOPT<2>
- *   ivco = PLLOPT<1:0>
- *
- * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
- */
-#define CONFIG_SYS_PLL0_OPT			0x04
-
-#define CONFIG_USART_BASE		ATMEL_BASE_USART1
-#define CONFIG_USART_ID			1
-
-/* User serviceable stuff */
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_STACKSIZE		(2048)
-
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_BOOTARGS							\
-	"console=ttyS0 root=mtd3 fbmem=2400k"
-
-#define CONFIG_BOOTCOMMAND						\
-	"fsload; bootm $(fileaddr)"
-
-/*
- * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
- * data on the serial line may interrupt the boot sequence.
- */
-#define CONFIG_BOOTDELAY		1
-#define CONFIG_AUTOBOOT
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT		\
-	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"d"
-#define CONFIG_AUTOBOOT_STOP_STR	" "
-
-/*
- * After booting the board for the first time, new ethernet addresses
- * should be generated and assigned to the environment variables
- * "ethaddr" and "eth1addr". This is normally done during production.
- */
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MMC
-
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_SOURCE
-#undef CONFIG_CMD_XIMG
-
-#define CONFIG_ATMEL_USART
-#define CONFIG_MACB
-#define CONFIG_PORTMUX_PIO
-#define CONFIG_SYS_NR_PIOS			5
-#define CONFIG_SYS_HSDRAMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#define CONFIG_GENERIC_MMC
-
-#define CONFIG_SYS_DCACHE_LINESZ		32
-#define CONFIG_SYS_ICACHE_LINESZ		32
-
-#define CONFIG_NR_DRAM_BANKS		1
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-
-#define CONFIG_SYS_FLASH_BASE			0x00000000
-#define CONFIG_SYS_FLASH_SIZE			0x800000
-#define CONFIG_SYS_MAX_FLASH_BANKS		1
-#define CONFIG_SYS_MAX_FLASH_SECT		135
-
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_TEXT_BASE		0x00000000
-
-#define CONFIG_SYS_INTRAM_BASE			INTERNAL_SRAM_BASE
-#define CONFIG_SYS_INTRAM_SIZE			INTERNAL_SRAM_SIZE
-#define CONFIG_SYS_SDRAM_BASE			EBI_SDRAM_BASE
-
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SIZE			65536
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
-
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE)
-
-#define CONFIG_SYS_MALLOC_LEN			(256*1024)
-
-/* Allow 4MB for the kernel run-time image */
-#define CONFIG_SYS_LOAD_ADDR			(EBI_SDRAM_BASE + 0x00400000)
-#define CONFIG_SYS_BOOTPARAMS_LEN		(16 * 1024)
-
-/* Other configuration settings that shouldn't have to change all that often */
-#define CONFIG_SYS_PROMPT			"U-Boot> "
-#define CONFIG_SYS_CBSIZE			256
-#define CONFIG_SYS_MAXARGS			16
-#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_SYS_MEMTEST_START		EBI_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + 0x3f00000)
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
-
-#endif /* __CONFIG_H */