X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fat91sam9x5ek.h;h=b1d4baaff9501c3711ebddb3c7be1602c3f031a0;hp=ad7d281dd63250bba292c59ba38d0569ef858fad;hb=HEAD;hpb=6f9656d726235b4cbb4f469a82c30e5006a75b53

diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index ad7d281..509c458 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -9,21 +9,10 @@
 #define __CONFIG_H__
 
 /* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK	32768
-#define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
-
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CFG_SYS_AT91_SLOW_CLOCK	32768
+#define CFG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
 
 /* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
 
 /*
  * define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0)
@@ -31,109 +20,27 @@
  */
 
 /* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE		0x20000000
-#define CONFIG_SYS_SDRAM_SIZE		0x08000000	/* 128 megs */
-
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
+#define CFG_SYS_SDRAM_BASE		0x20000000
+#define CFG_SYS_SDRAM_SIZE		0x08000000	/* 128 megs */
 
 /* DataFlash */
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x40000000
-#define CONFIG_SYS_NAND_DBW_8		1
+#define CFG_SYS_NAND_BASE		0x40000000
 /* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
+#define CFG_SYS_NAND_MASK_ALE	(1 << 21)
 /* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD4
-#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PD5
+#define CFG_SYS_NAND_MASK_CLE	(1 << 22)
+#define CFG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD4
+#define CFG_SYS_NAND_READY_PIN	AT91_PIN_PD5
 #endif
 
-/* USB */
-#ifdef CONFIG_CMD_USB
-#ifndef CONFIG_USB_EHCI_HCD
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE		ATMEL_BASE_OHCI
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9x5"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	3
-#endif
-#endif
-
-#define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
-
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		0x26e00000
-
-#ifdef CONFIG_NAND_BOOT
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET		0x140000
-#define CONFIG_ENV_OFFSET_REDUND	0x100000
-#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND	"nand read " \
-				"0x22000000 0x200000 0x600000; " \
-				"nand read 0x21000000 0x180000 0x20000; " \
-				"bootz 0x22000000 - 0x21000000"
-#elif defined(CONFIG_SPI_BOOT)
-/* bootstrap + u-boot + env + linux in spi flash */
-#define CONFIG_ENV_OFFSET	0x5000
-#define CONFIG_ENV_SIZE		0x3000
-#define CONFIG_ENV_SECT_SIZE	0x1000
-#define CONFIG_BOOTCOMMAND	"sf probe 0; " \
-				"sf read 0x22000000 0x100000 0x300000; " \
-				"bootm 0x22000000"
-#elif defined(CONFIG_SYS_USE_DATAFLASH)
-/* bootstrap + u-boot + env + linux in data flash */
-#define CONFIG_ENV_OFFSET	0x4200
-#define CONFIG_ENV_SIZE		0x4200
-#define CONFIG_ENV_SECT_SIZE	0x210
-#define CONFIG_BOOTCOMMAND	"sf probe 0; " \
-				"sf read 0x22000000 0x84000 0x294000; " \
-				"bootm 0x22000000"
-#else /* CONFIG_SD_BOOT */
-/* bootstrap + u-boot + env + linux in mmc */
-#define CONFIG_ENV_SIZE		0x4000
-#endif
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(512 * 1024 + 0x1000)
-
 /* SPL */
-#define CONFIG_SPL_MAX_SIZE		0x6000
-#define CONFIG_SPL_STACK		0x308000
 
-#define CONFIG_SPL_BSS_START_ADDR	0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
-#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
-
-#define CONFIG_SYS_MONITOR_LEN		(512 << 10)
-
-#define CONFIG_SYS_MASTER_CLOCK		132096000
-#define CONFIG_SYS_AT91_PLLA		0x20c73f03
-#define CONFIG_SYS_MCKR			0x1301
-#define CONFIG_SYS_MCKR_CSS		0x1302
-
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
-#elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#endif
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0x0
+#define CFG_SYS_MASTER_CLOCK		132096000
+#define CFG_SYS_AT91_PLLA		0x20c73f03
+#define CFG_SYS_MCKR			0x1301
+#define CFG_SYS_MCKR_CSS		0x1302
 
 #endif