X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fam3517_evm.h;h=1e2d55bec577e3678dc5a235a52bf5c926d10871;hp=e54708ccb5a1ff006882e882804822e9f6a3c1a2;hb=HEAD;hpb=6eecaf5d0f6b9a500dd5798f1f2bc8296bcfe158

diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index e54708c..b75c648 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -14,32 +14,18 @@
 
 #include <configs/ti_omap3_common.h>
 
-/* Ethernet */
-#define CONFIG_NET_RETRY_COUNT		10
-
 /* Board NAND Info. */
 #ifdef CONFIG_MTD_RAW_NAND
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS		{ 2,  3,  4,  5,  6,  7,  8,  9, 10, \
+#define CFG_SYS_NAND_ECCPOS		{ 2,  3,  4,  5,  6,  7,  8,  9, 10, \
 					 11, 12, 13, 14, 16, 17, 18, 19, 20, \
 					 21, 22, 23, 24, 25, 26, 27, 28, 30, \
 					 31, 32, 33, 34, 35, 36, 37, 38, 39, \
 					 40, 41, 42, 44, 45, 46, 47, 48, 49, \
 					 50, 51, 52, 53, 54, 55, 56 }
 
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	13
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_SYS_NAND_MAX_OOBFREE	2
-#define CONFIG_SYS_NAND_MAX_ECCPOS	56
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
+#define CFG_SYS_NAND_ECCSIZE		512
+#define CFG_SYS_NAND_ECCBYTES	13
+#define CFG_SYS_NAND_U_BOOT_START	CONFIG_TEXT_BASE
 /* NAND block size is 128 KiB.  Synchronize these values with
  * corresponding Device Tree entries in Linux:
  *  MLO(SPL)             4 * NAND_BLOCK_SIZE = 512 KiB  @ 0x000000
@@ -52,10 +38,7 @@
 #endif /* CONFIG_MTD_RAW_NAND */
 
 /* Environment information */
-
-#define CONFIG_BOOTFILE		"uImage"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x82000000\0" \
 	"console=ttyS2,115200n8\0" \
 	"fdtfile=am3517-evm.dtb\0" \
@@ -64,8 +47,6 @@
 	"bootenv=uEnv.txt\0" \
 	"cmdline=\0" \
 	"optargs=\0" \
-	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"mmcdev=0\0" \
 	"mmcpart=1\0" \
 	"mmcroot=/dev/mmcblk0p2 rw\0" \
@@ -98,60 +79,17 @@
 		"nand read ${fdtaddr} aa0000 80000; " \
 		"bootm ${loadaddr} - ${fdtaddr}\0" \
 
-#define CONFIG_BOOTCOMMAND \
-	"mmc dev ${mmcdev}; if mmc rescan; then " \
-		"echo SD/MMC found on device $mmcdev; " \
-		"if run loadbootenv; then " \
-			"run importbootenv; " \
-		"fi; " \
-		"echo Checking if uenvcmd is set ...; " \
-		"if test -n $uenvcmd; then " \
-			"echo Running uenvcmd ...; " \
-			"run uenvcmd; " \
-		"fi; " \
-		"echo Running default loadimage ...; " \
-		"setenv bootfile zImage; " \
-		"if run loadimage; then " \
-			"run loadfdt; " \
-			"run mmcboot; " \
-		"fi; " \
-	"else run nandboot; fi"
-
 /* Miscellaneous configurable options */
 
-/* We set the max number of command args high to avoid HUSH bugs. */
-#define CONFIG_SYS_MAXARGS		64
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
-					+ sizeof(CONFIG_SYS_PROMPT) + 16)
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-
 /* memtest works on */
 
-/* Physical Memory Map */
-#define CONFIG_SYS_CS0_SIZE		(256 * 1024 * 1024)
-
 /* FLASH and environment organization */
 
 /* **** PISMO SUPPORT *** */
-#define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors */
 						/* on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 #if defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FLASH_BASE		NAND_BASE
+#define CFG_SYS_FLASH_BASE		NAND_BASE
 #endif
 
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-
-/* Defines for SPL */
-
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
-
 #endif /* __CONFIG_H */