X-Git-Url: http://review.tizen.org/git/?p=platform%2Fkernel%2Fu-boot.git;a=blobdiff_plain;f=include%2Fconfigs%2FM5282EVB.h;h=fd970d0787f834c08cf23f2b901e49f013db54e9;hp=e191dc615bc27c748793c74d2838583a3afb7439;hb=HEAD;hpb=08574ed339fb474e7d984a2e48160615286e4515 diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index e191dc6..e289a23 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -17,9 +17,7 @@ * (easy to change) */ -#define CONFIG_SYS_UART_PORT (0) - -#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ +#define CFG_SYS_UART_PORT (0) /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -29,15 +27,7 @@ . = DEFINED(env_offset) ? env_offset : .; \ env/embedded.o(.text*); -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* CONFIG_MCFFEC */ - -#define CONFIG_HOSTNAME "M5282EVB" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "loadaddr=10000\0" \ "u-boot=u-boot.bin\0" \ @@ -49,98 +39,93 @@ "save\0" \ "" -#define CONFIG_SYS_CLK 64000000 +#define CFG_SYS_CLK 64000000 /* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */ -#define CONFIG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */ -#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */ +#define CFG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */ +#define CFG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */ /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ -#define CONFIG_SYS_MBAR 0x40000000 +#define CFG_SYS_MBAR 0x40000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ +#define CFG_SYS_INIT_RAM_ADDR 0x20000000 +#define CFG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 + * Please note that CFG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE -#define CONFIG_SYS_INT_FLASH_BASE 0xf0000000 -#define CONFIG_SYS_INT_FLASH_ENABLE 0x21 +#define CFG_SYS_SDRAM_BASE 0x00000000 +#define CFG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_SYS_FLASH_BASE CFG_SYS_CS0_BASE +#define CFG_SYS_INT_FLASH_BASE 0xf0000000 +#define CFG_SYS_INT_FLASH_ENABLE 0x21 /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ #ifdef CONFIG_SYS_FLASH_CFI -# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ -# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +# define CFG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE } #endif /*----------------------------------------------------------------------- * Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) -#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ - CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ CF_CACR_CEIB | CF_CACR_DBWE | \ CF_CACR_EUSP) /*----------------------------------------------------------------------- * Memory bank definitions */ -#define CONFIG_SYS_CS0_BASE 0xFFE00000 -#define CONFIG_SYS_CS0_CTRL 0x00001980 -#define CONFIG_SYS_CS0_MASK 0x001F0001 +#define CFG_SYS_CS0_BASE 0xFFE00000 +#define CFG_SYS_CS0_CTRL 0x00001980 +#define CFG_SYS_CS0_MASK 0x001F0001 /*----------------------------------------------------------------------- * Port configuration */ -#define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */ -#define CONFIG_SYS_PADDR 0x0000000 -#define CONFIG_SYS_PADAT 0x0000000 - -#define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */ -#define CONFIG_SYS_PBDDR 0x0000000 -#define CONFIG_SYS_PBDAT 0x0000000 - -#define CONFIG_SYS_PCCNT 0x0000000 /* Port C D[15:08] */ -#define CONFIG_SYS_PCDDR 0x0000000 -#define CONFIG_SYS_PCDAT 0x0000000 - -#define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */ -#define CONFIG_SYS_PCDDR 0x0000000 -#define CONFIG_SYS_PCDAT 0x0000000 - -#define CONFIG_SYS_PEHLPAR 0xC0 -#define CONFIG_SYS_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */ -#define CONFIG_SYS_DDRUA 0x05 -#define CONFIG_SYS_PJPAR 0xFF +#define CFG_SYS_PACNT 0x0000000 /* Port A D[31:24] */ +#define CFG_SYS_PADDR 0x0000000 +#define CFG_SYS_PADAT 0x0000000 + +#define CFG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */ +#define CFG_SYS_PBDDR 0x0000000 +#define CFG_SYS_PBDAT 0x0000000 + +#define CFG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */ + +#define CFG_SYS_PEHLPAR 0xC0 +#define CFG_SYS_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */ +#define CFG_SYS_DDRUA 0x05 +#define CFG_SYS_PJPAR 0xFF + #endif /* _CONFIG_M5282EVB_H */