+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2008
* Benjamin Warren, biggerbadderben@gmail.com
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
/*
#ifndef _NETDEV_H_
#define _NETDEV_H_
+#include <phy_interface.h>
+
+struct udevice;
/*
* Board and CPU-specific initialization functions
* -1: failure
*/
-int board_eth_init(bd_t *bis);
-int cpu_eth_init(bd_t *bis);
+int board_eth_init(struct bd_info *bis);
+int board_interface_eth_init(struct udevice *dev,
+ phy_interface_t interface_type);
+int cpu_eth_init(struct bd_info *bis);
/* Driver initialization prototypes */
-int at91emac_register(bd_t *bis, unsigned long iobase);
-int au1x00_enet_initialize(bd_t*);
-int ax88180_initialize(bd_t *bis);
-int bcm_sf2_eth_register(bd_t *bis, u8 dev_num);
-int bfin_EMAC_initialize(bd_t *bis);
-int calxedaxgmac_initialize(u32 id, ulong base_addr);
+int ax88180_initialize(struct bd_info *bis);
+int bcm_sf2_eth_register(struct bd_info *bis, u8 dev_num);
+int bfin_EMAC_initialize(struct bd_info *bis);
int cs8900_initialize(u8 dev_num, int base_addr);
-int davinci_emac_initialize(void);
-int dc21x4x_initialize(bd_t *bis);
+int dc21x4x_initialize(struct bd_info *bis);
int designware_initialize(ulong base_addr, u32 interface);
-int dm9000_initialize(bd_t *bis);
+int dm9000_initialize(struct bd_info *bis);
int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
-int e1000_initialize(bd_t *bis);
-int eepro100_initialize(bd_t *bis);
-int enc28j60_initialize(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode);
+int e1000_initialize(struct bd_info *bis);
+int eepro100_initialize(struct bd_info *bis);
int ep93xx_eth_initialize(u8 dev_num, int base_addr);
-int eth_3com_initialize (bd_t * bis);
+int eth_3com_initialize (struct bd_info * bis);
int ethoc_initialize(u8 dev_num, int base_addr);
-int fec_initialize (bd_t *bis);
-int fecmxc_initialize(bd_t *bis);
-int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
-int ftgmac100_initialize(bd_t *bits);
-int ftmac100_initialize(bd_t *bits);
-int ftmac110_initialize(bd_t *bits);
-void gt6426x_eth_initialize(bd_t *bis);
+int fecmxc_initialize(struct bd_info *bis);
+int fecmxc_initialize_multi(struct bd_info *bis, int dev_id, int phy_id,
+ uint32_t addr);
+int ftmac100_initialize(struct bd_info *bits);
+int ftmac110_initialize(struct bd_info *bits);
+void gt6426x_eth_initialize(struct bd_info *bis);
int ks8851_mll_initialize(u8 dev_num, int base_addr);
int lan91c96_initialize(u8 dev_num, int base_addr);
-int lpc32xx_eth_initialize(bd_t *bis);
+int lpc32xx_eth_initialize(struct bd_info *bis);
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-int mcdmafec_initialize(bd_t *bis);
-int mcffec_initialize(bd_t *bis);
-int mvgbe_initialize(bd_t *bis);
-int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr);
-int natsemi_initialize(bd_t *bis);
+int mcdmafec_initialize(struct bd_info *bis);
+int mcffec_initialize(struct bd_info *bis);
+int mvgbe_initialize(struct bd_info *bis);
+int mvneta_initialize(struct bd_info *bis, int base_addr, int devnum,
+ int phy_addr);
+int natsemi_initialize(struct bd_info *bis);
int ne2k_register(void);
-int npe_initialize(bd_t *bis);
-int ns8382x_initialize(bd_t *bis);
-int pcnet_initialize(bd_t *bis);
-int ppc_4xx_eth_initialize (bd_t *bis);
-int rtl8139_initialize(bd_t *bis);
-int rtl8169_initialize(bd_t *bis);
-int scc_initialize(bd_t *bis);
-int sh_eth_initialize(bd_t *bis);
-int skge_initialize(bd_t *bis);
-int smc91111_initialize(u8 dev_num, int base_addr);
-int smc911x_initialize(u8 dev_num, int base_addr);
-int tsi108_eth_initialize(bd_t *bis);
-int uec_standard_init(bd_t *bis);
-int uli526x_initialize(bd_t *bis);
-int armada100_fec_register(unsigned long base_addr);
-int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
- unsigned long ctrl_addr);
-/*
- * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
- * exported by a public hader file, we need a global definition at this point.
- */
-#if defined(CONFIG_XILINX_LL_TEMAC)
-#define XILINX_LL_TEMAC_M_FIFO 0 /* use FIFO Ctrl */
-#define XILINX_LL_TEMAC_M_SDMA_PLB (1 << 0)/* use SDMA Ctrl via PLB */
-#define XILINX_LL_TEMAC_M_SDMA_DCR (1 << 1)/* use SDMA Ctrl via DCR */
-#endif
+int npe_initialize(struct bd_info *bis);
+int ns8382x_initialize(struct bd_info *bis);
+int pcnet_initialize(struct bd_info *bis);
+int ppc_4xx_eth_initialize (struct bd_info *bis);
+int rtl8139_initialize(struct bd_info *bis);
+int rtl8169_initialize(struct bd_info *bis);
+int scc_initialize(struct bd_info *bis);
+int sh_eth_initialize(struct bd_info *bis);
+int skge_initialize(struct bd_info *bis);
+int smc91111_initialize(u8 dev_num, phys_addr_t base_addr);
+int smc911x_initialize(u8 dev_num, phys_addr_t base_addr);
+int uli526x_initialize(struct bd_info *bis);
/* Boards with PCI network controllers can call this from their board_eth_init()
* function to initialize whatever's on board.
* Return value is total # of devices found */
-static inline int pci_eth_init(bd_t *bis)
+static inline int pci_eth_init(struct bd_info *bis)
{
int num = 0;
return num;
}
-#ifdef CONFIG_DM_ETH
-struct mii_dev *fec_get_miibus(struct udevice *dev, int dev_id);
-#else
-struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id);
-#endif
+struct mii_dev *fec_get_miibus(ulong base_addr, int dev_id);
#ifdef CONFIG_PHYLIB
struct phy_device;
-int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
+int fec_probe(struct bd_info *bd, int dev_id, uint32_t base_addr,
struct mii_dev *bus, struct phy_device *phydev);
#else
/*
* Allow FEC to fine-tune MII configuration on boards which require this.
*/
+struct eth_device;
int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
#endif
projects / platform / kernel / u-boot.git / blobdiff