Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / zmx25.h

diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
deleted file mode 100644 (file)
index 15bd97f..0000000
--- a/include/configs/zmx25.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (c) 2011 Graf-Syteco, Matthias Weisser
- * <weisserm@arcor.de>
- *
- * Configuation settings for the zmx25 board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-
-#define CONFIG_SYS_TIMER_RATE          32768
-#define CONFIG_SYS_TIMER_COUNTER       \
-       (&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
-
-#define CONFIG_MACH_TYPE       MACH_TYPE_ZMX25
-/*
- * Environment settings
- */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-       "gs_fast_boot=setenv bootdelay 5\0" \
-       "gs_slow_boot=setenv bootdelay 10\0" \
-       "bootcmd=dcache off; mw.l 0x81000000 0 1024; usb start;" \
-               "fatls usb 0; fatload usb 0 0x81000000 zmx25-init.bin;" \
-               "bootm 0x81000000; bootelf 0x81000000\0"
-
-#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs      */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * Hardware drivers
- */
-
-/*
- * Serial
- */
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE   UART2_BASE
-
-/*
- * Ethernet
- */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_MXC_PHYADDR         0x00
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * USB
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI_MXC
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORT    1
-#define CONFIG_MXC_USB_PORTSC  MXC_EHCI_MODE_SERIAL
-#define CONFIG_MXC_USB_FLAGS   (MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN)
-#define CONFIG_EHCI_IS_TDI
-#endif /* CONFIG_CMD_USB */
-
-/* SDRAM */
-#define PHYS_SDRAM             0x80000000      /* start address of LPDDRRAM */
-#define PHYS_SDRAM_SIZE                0x04000000      /* 64 megs */
-
-#define CONFIG_SYS_SDRAM_BASE  PHYS_SDRAM
-#define CONFIG_SYS_INIT_SP_ADDR        0x78020000      /* end of internal SRAM */
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_BASE          0xA0000000
-#define CONFIG_SYS_MAX_FLASH_BANKS     1
-#define CONFIG_SYS_MAX_FLASH_SECT      256
-
-/*
- * CFI FLASH driver setup
- */
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_SYS_SDRAM_BASE
-
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN          (0x400000 - 0x8000)
-
-#endif /* __CONFIG_H */