#define CONFIG_DOS_PARTITION 1
#define BOARD_LATE_INIT 1
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */
+#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
-#define CFG_DRAM_BASE 0xa0000000
-#define CFG_DRAM_SIZE 0x04000000
+#define CONFIG_SYS_DRAM_BASE 0xa0000000
+#define CONFIG_SYS_DRAM_SIZE 0x04000000
/* FLASH organization */
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_2 0x00000000 /* Flash Bank #2 */
#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 127 KB sectors */
-#define CFG_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
/*
* JFFS2 partitions
#define CONFIG_ENV_SIZE 0x4000 /* 16kB Total Size of Environment Sector */
/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (75*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (50*CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (75*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT (50*CONFIG_SYS_HZ) /* Timeout for Flash Write */
/* Size of malloc() pool */
-#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024)
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/* Hardware drivers */
#define CONFIG_DRIVER_SMC91111
#define CONFIG_CMDLINE_TAG
/* Miscellaneous configurable options */
-#define CFG_HUSH_PARSER 1
-#define CFG_PROMPT_HUSH_PS2 "> "
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "XS-Engine u-boot> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0xA0400000 /* memtest works on */
-#define CFG_MEMTEST_END 0xA0800000 /* 4 ... 8 MB in DRAM */
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */
-#define CFG_MMC_BASE 0xF0000000
-#define CFG_LOAD_ADDR 0xA0000000 /* load kernel to this address */
+#define CONFIG_SYS_HUSH_PARSER 1
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "XS-Engine u-boot> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_MEMTEST_START 0xA0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0xA0800000 /* 4 ... 8 MB in DRAM */
+#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */
+#define CONFIG_SYS_MMC_BASE 0xF0000000
+#define CONFIG_SYS_LOAD_ADDR 0xA0000000 /* load kernel to this address */
/* Stack sizes - The stack sizes are set up in start.S using the settings below */
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
#endif
/* GP set register */
-#define CFG_GPSR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */
-#define CFG_GPSR1_VAL 0x00020000 /* nPWE */
-#define CFG_GPSR2_VAL 0x0000C000 /* CS2, CS3 */
+#define CONFIG_SYS_GPSR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */
+#define CONFIG_SYS_GPSR1_VAL 0x00020000 /* nPWE */
+#define CONFIG_SYS_GPSR2_VAL 0x0000C000 /* CS2, CS3 */
/* GP clear register */
-#define CFG_GPCR0_VAL 0x00000000
-#define CFG_GPCR1_VAL 0x00000000
-#define CFG_GPCR2_VAL 0x00000000
+#define CONFIG_SYS_GPCR0_VAL 0x00000000
+#define CONFIG_SYS_GPCR1_VAL 0x00000000
+#define CONFIG_SYS_GPCR2_VAL 0x00000000
/* GP direction register */
-#define CFG_GPDR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */
-#define CFG_GPDR1_VAL 0x00022A80 /* nPWE, FFUART + BTUART pins */
-#define CFG_GPDR2_VAL 0x0000C000 /* CS2, CS3 */
+#define CONFIG_SYS_GPDR0_VAL 0x0000A000 /* CS1, PROG(FPGA) */
+#define CONFIG_SYS_GPDR1_VAL 0x00022A80 /* nPWE, FFUART + BTUART pins */
+#define CONFIG_SYS_GPDR2_VAL 0x0000C000 /* CS2, CS3 */
/* GP rising edge detect register */
-#define CFG_GRER0_VAL 0x00000000
-#define CFG_GRER1_VAL 0x00000000
-#define CFG_GRER2_VAL 0x00000000
+#define CONFIG_SYS_GRER0_VAL 0x00000000
+#define CONFIG_SYS_GRER1_VAL 0x00000000
+#define CONFIG_SYS_GRER2_VAL 0x00000000
/* GP falling edge detect register */
-#define CFG_GFER0_VAL 0x00000000
-#define CFG_GFER1_VAL 0x00000000
-#define CFG_GFER2_VAL 0x00000000
+#define CONFIG_SYS_GFER0_VAL 0x00000000
+#define CONFIG_SYS_GFER1_VAL 0x00000000
+#define CONFIG_SYS_GFER2_VAL 0x00000000
/* GP alternate function register */
-#define CFG_GAFR0_L_VAL 0x80000000 /* CS1 */
-#define CFG_GAFR0_U_VAL 0x00000010 /* RDY */
-#define CFG_GAFR1_L_VAL 0x09988050 /* FFUART + BTUART pins */
-#define CFG_GAFR1_U_VAL 0x00000008 /* nPWE */
-#define CFG_GAFR2_L_VAL 0xA0000000 /* CS2, CS3 */
-#define CFG_GAFR2_U_VAL 0x00000000
-
-#define CFG_PSSR_VAL 0x00000020 /* Power manager sleep status */
-#define CFG_CCCR_VAL 0x00000161 /* 100 MHz memory, 400 MHz CPU */
-#define CFG_CKEN_VAL 0x000000C0 /* BTUART and FFUART enabled */
-#define CFG_ICMR_VAL 0x00000000 /* No interrupts enabled */
+#define CONFIG_SYS_GAFR0_L_VAL 0x80000000 /* CS1 */
+#define CONFIG_SYS_GAFR0_U_VAL 0x00000010 /* RDY */
+#define CONFIG_SYS_GAFR1_L_VAL 0x09988050 /* FFUART + BTUART pins */
+#define CONFIG_SYS_GAFR1_U_VAL 0x00000008 /* nPWE */
+#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000 /* CS2, CS3 */
+#define CONFIG_SYS_GAFR2_U_VAL 0x00000000
+
+#define CONFIG_SYS_PSSR_VAL 0x00000020 /* Power manager sleep status */
+#define CONFIG_SYS_CCCR_VAL 0x00000161 /* 100 MHz memory, 400 MHz CPU */
+#define CONFIG_SYS_CKEN_VAL 0x000000C0 /* BTUART and FFUART enabled */
+#define CONFIG_SYS_ICMR_VAL 0x00000000 /* No interrupts enabled */
/* Memory settings */
-#define CFG_MSC0_VAL 0x25F425F0
+#define CONFIG_SYS_MSC0_VAL 0x25F425F0
/* MDCNFG: SDRAM Configuration Register */
-#define CFG_MDCNFG_VAL 0x000009C9
+#define CONFIG_SYS_MDCNFG_VAL 0x000009C9
/* MDREFR: SDRAM Refresh Control Register */
-#define CFG_MDREFR_VAL 0x00018018
+#define CONFIG_SYS_MDREFR_VAL 0x00018018
/* MDMRS: Mode Register Set Configuration Register */
-#define CFG_MDMRS_VAL 0x00220022
+#define CONFIG_SYS_MDMRS_VAL 0x00220022
#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff