+++ /dev/null
-/*
- * (C) Copyright 2004-2005
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2004
- * Vincent Dubey, Xa SA, vincent.dubey@xa-ch.com
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.ne
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuation settings for the xaeniax board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_CPU_PXA25X 1 /* This is an PXA255 CPU */
-#define CONFIG_XAENIAX 1 /* on a xaeniax board */
-#define CONFIG_SYS_TEXT_BASE 0x0
-
-#define CONFIG_BOARD_LATE_INIT
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_BTUART 1 /* we use BTUART on XAENIAX */
-#define CONFIG_CONS_INDEX 4
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_DTT
-
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.68.201
-#define CONFIG_SERVERIP 192.168.68.62
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTCOMMAND "bootm 0x00100000"
-#define CONFIG_BOOTARGS "console=ttyS1,115200"
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-#endif
-
-/*
- * Size of malloc() pool; this lives below the uppermost 128 KiB which are
- * used for the RAM copy of the uboot code
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER 1
-
-#undef CONFIG_SYS_PROMPT
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "u-boot$ " /* Monitor Command Prompt */
-#else
-#define CONFIG_SYS_PROMPT "u-boot=> " /* Monitor Command Prompt */
-#endif
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_DEVICE_NULLDEV 1
-
-#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */
-
-#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks (partition) of DRAM */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
-#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
-#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
-#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
-#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
-#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
-
-#define CONFIG_SYS_DRAM_BASE 0xa0000000
-#define CONFIG_SYS_DRAM_SIZE 0x04000000
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/* FIXME */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)/* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
-
-/*
- * SMSC91C111 Network Card
- */
-#define CONFIG_SMC91111 1
-#define CONFIG_SMC91111_BASE 0x10000300 /* chip select 3 */
-#define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */
-#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */
-#undef CONFIG_SHOW_ACTIVITY
-#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */
-
-/*
- * GPIO settings
- */
-
-/*
- * GP05 == nUSBReset is 1
- * GP10 == CFReset is 1
- * GP13 == nCFDataEnable is 1
- * GP14 == nCFAddrEnable is 1
- * GP15 == nCS1 is 1
- * GP21 == ComBrdReset is 1
- * GP24 == SFRM is 1
- * GP25 == TXD is 1
- * GP31 == SYNC is 1
- * GP33 == nCS5 is 1
- * GP39 == FFTXD is 1
- * GP41 == RTS is 1
- * GP43 == BTTXD is 1
- * GP45 == BTRTS is 1
- * GP47 == TXD is 1
- * GP48 == nPOE is 1
- * GP49 == nPWE is 1
- * GP50 == nPIOR is 1
- * GP51 == nPIOW is 1
- * GP52 == nPCE[1] is 1
- * GP53 == nPCE[2] is 1
- * GP54 == nPSKTSEL is 1
- * GP55 == nPREG is 1
- * GP78 == nCS2 is 1
- * GP79 == nCS3 is 1
- * GP80 == nCS4 is 1
- * GP82 == NSSPSFRM is 1
- * GP83 == NSSPTXD is 1
- */
-#define CONFIG_SYS_GPSR0_VAL 0x8320E420
-#define CONFIG_SYS_GPSR1_VAL 0x00FFAA82
-#define CONFIG_SYS_GPSR2_VAL 0x000DC000
-
-/*
- * GP03 == LANReset is 0
- * GP06 == USBWakeUp is 0
- * GP11 == USBControl is 0
- * GP12 == Buzzer is 0
- * GP16 == PWM0 is 0
- * GP17 == PWM1 is 0
- * GP23 == SCLK is 0
- * GP30 == SDATA_OUT is 0
- * GP81 == NSSPCLK is 0
- */
-#define CONFIG_SYS_GPCR0_VAL 0x40C31848
-#define CONFIG_SYS_GPCR1_VAL 0x00000000
-#define CONFIG_SYS_GPCR2_VAL 0x00020000
-
-/*
- * GP00 == CPUWakeUpUSB is input
- * GP01 == GP reset is input
- * GP02 == LANInterrupt is input
- * GP03 == LANReset is output
- * GP04 == USBInterrupt is input
- * GP05 == nUSBReset is output
- * GP06 == USBWakeUp is output
- * GP07 == CFReady/nBusy is input
- * GP08 == nCFCardDetect1 is input
- * GP09 == nCFCardDetect2 is input
- * GP10 == nCFReset is output
- * GP11 == USBControl is output
- * GP12 == Buzzer is output
- * GP13 == CFDataEnable is output
- * GP14 == CFAddressEnable is output
- * GP15 == nCS1 is output
- * GP16 == PWM0 is output
- * GP17 == PWM1 is output
- * GP18 == RDY is input
- * GP19 == ReaderReady is input
- * GP20 == ReaderReset is input
- * GP21 == ComBrdReset is output
- * GP23 == SCLK is output
- * GP24 == SFRM is output
- * GP25 == TXD is output
- * GP26 == RXD is input
- * GP27 == EXTCLK is input
- * GP28 == BITCLK is output
- * GP29 == SDATA_IN0 is input
- * GP30 == SDATA_OUT is output
- * GP31 == SYNC is output
- * GP32 == SYSSCLK is output
- * GP33 == nCS5 is output
- * GP34 == FFRXD is input
- * GP35 == CTS is input
- * GP36 == DCD is input
- * GP37 == DSR is input
- * GP38 == RI is input
- * GP39 == FFTXD is output
- * GP40 == DTR is output
- * GP41 == RTS is output
- * GP42 == BTRXD is input
- * GP43 == BTTXD is output
- * GP44 == BTCTS is input
- * GP45 == BTRTS is output
- * GP46 == RXD is input
- * GP47 == TXD is output
- * GP48 == nPOE is output
- * GP49 == nPWE is output
- * GP50 == nPIOR is output
- * GP51 == nPIOW is output
- * GP52 == nPCE[1] is output
- * GP53 == nPCE[2] is output
- * GP54 == nPSKTSEL is output
- * GP55 == nPREG is output
- * GP56 == nPWAIT is input
- * GP57 == nPIOS16 is input
- * GP58 == LDD[0] is output
- * GP59 == LDD[1] is output
- * GP60 == LDD[2] is output
- * GP61 == LDD[3] is output
- * GP62 == LDD[4] is output
- * GP63 == LDD[5] is output
- * GP64 == LDD[6] is output
- * GP65 == LDD[7] is output
- * GP66 == LDD[8] is output
- * GP67 == LDD[9] is output
- * GP68 == LDD[10] is output
- * GP69 == LDD[11] is output
- * GP70 == LDD[12] is output
- * GP71 == LDD[13] is output
- * GP72 == LDD[14] is output
- * GP73 == LDD[15] is output
- * GP74 == LCD_FCLK is output
- * GP75 == LCD_LCLK is output
- * GP76 == LCD_PCLK is output
- * GP77 == LCD_ACBIAS is output
- * GP78 == nCS2 is output
- * GP79 == nCS3 is output
- * GP80 == nCS4 is output
- * GP81 == NSSPCLK is output
- * GP82 == NSSPSFRM is output
- * GP83 == NSSPTXD is output
- * GP84 == NSSPRXD is input
- */
-#define CONFIG_SYS_GPDR0_VAL 0xD3E3FC68
-#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB83
-#define CONFIG_SYS_GPDR2_VAL 0x000FFFFF
-
-/*
- * GP01 == GP reset is AF01
- * GP15 == nCS1 is AF10
- * GP16 == PWM0 is AF10
- * GP17 == PWM1 is AF10
- * GP18 == RDY is AF01
- * GP23 == SCLK is AF10
- * GP24 == SFRM is AF10
- * GP25 == TXD is AF10
- * GP26 == RXD is AF01
- * GP27 == EXTCLK is AF01
- * GP28 == BITCLK is AF01
- * GP29 == SDATA_IN0 is AF10
- * GP30 == SDATA_OUT is AF01
- * GP31 == SYNC is AF01
- * GP32 == SYSCLK is AF01
- * GP33 == nCS5 is AF10
- * GP34 == FFRXD is AF01
- * GP35 == CTS is AF01
- * GP36 == DCD is AF01
- * GP37 == DSR is AF01
- * GP38 == RI is AF01
- * GP39 == FFTXD is AF10
- * GP40 == DTR is AF10
- * GP41 == RTS is AF10
- * GP42 == BTRXD is AF01
- * GP43 == BTTXD is AF10
- * GP44 == BTCTS is AF01
- * GP45 == BTRTS is AF10
- * GP46 == RXD is AF10
- * GP47 == TXD is AF01
- * GP48 == nPOE is AF10
- * GP49 == nPWE is AF10
- * GP50 == nPIOR is AF10
- * GP51 == nPIOW is AF10
- * GP52 == nPCE[1] is AF10
- * GP53 == nPCE[2] is AF10
- * GP54 == nPSKTSEL is AF10
- * GP55 == nPREG is AF10
- * GP56 == nPWAIT is AF01
- * GP57 == nPIOS16 is AF01
- * GP58 == LDD[0] is AF10
- * GP59 == LDD[1] is AF10
- * GP60 == LDD[2] is AF10
- * GP61 == LDD[3] is AF10
- * GP62 == LDD[4] is AF10
- * GP63 == LDD[5] is AF10
- * GP64 == LDD[6] is AF10
- * GP65 == LDD[7] is AF10
- * GP66 == LDD[8] is AF10
- * GP67 == LDD[9] is AF10
- * GP68 == LDD[10] is AF10
- * GP69 == LDD[11] is AF10
- * GP70 == LDD[12] is AF10
- * GP71 == LDD[13] is AF10
- * GP72 == LDD[14] is AF10
- * GP73 == LDD[15] is AF10
- * GP74 == LCD_FCLK is AF10
- * GP75 == LCD_LCLK is AF10
- * GP76 == LCD_PCLK is AF10
- * GP77 == LCD_ACBIAS is AF10
- * GP78 == nCS2 is AF10
- * GP79 == nCS3 is AF10
- * GP80 == nCS4 is AF10
- * GP81 == NSSPCLK is AF01
- * GP82 == NSSPSFRM is AF01
- * GP83 == NSSPTXD is AF01
- * GP84 == NSSPRXD is AF10
- */
-#define CONFIG_SYS_GAFR0_L_VAL 0x80000004
-#define CONFIG_SYS_GAFR0_U_VAL 0x595A801A
-#define CONFIG_SYS_GAFR1_L_VAL 0x699A9559
-#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA
-#define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA
-#define CONFIG_SYS_GAFR2_U_VAL 0x00000256
-
-/*
- * clock settings
- */
-/* RDH = 1
- * PH = 0
- * VFS = 0
- * BFS = 0
- * SSS = 0
- */
-#define CONFIG_SYS_PSSR_VAL 0x00000030
-
-#define CONFIG_SYS_CKEN 0x00000080 /* */
-#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */
-#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10
-
-
-/*
- * Memory settings
- *
- * This is the configuration for nCS0/1 -> flash banks
- * configuration for nCS1 :
- * [31] 0 -
- * [30:28] 000 -
- * [27:24] 0000 -
- * [23:20] 0000 -
- * [19] 0 -
- * [18:16] 000 -
- * configuration for nCS0:
- * [15] 0 - Slower Device
- * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [11:08] 0011 - Address to data valid in bursts: (3+1)*MemClk = 40 ns
- * [07:04] 1111 - " for first access: (23+2)*MemClk = 250 ns (fixme 12+2?)
- * [03] 0 - 32 Bit bus width
- * [02:00] 010 - burst OF 4 ROM or FLASH
-*/
-#define CONFIG_SYS_MSC0_VAL 0x000023D2
-
-/* This is the configuration for nCS2/3 -> USB controller, LAN
- * configuration for nCS3: LAN
- * [31] 0 - Slower Device
- * [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns
- * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [23:20] 0010 - RDF3: Address for first access: (2+1)*MemClk = 30 ns
- * [19] 0 - 32 Bit bus width
- * [18:16] 100 - variable latency I/O
- * configuration for nCS2: USB
- * [15] 1 - Faster Device
- * [14:12] 010 - RRR2: CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [11:08] 0010 - RDN2: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [07:04] 0110 - RDF2: Address for first access: (6+1)*MemClk = 70 ns
- * [03] 1 - 16 Bit bus width
- * [02:00] 100 - variable latency I/O
- */
-#define CONFIG_SYS_MSC1_VAL 0x1224A26C
-
-/* This is the configuration for nCS4/5 -> LAN
- * configuration for nCS5:
- * [31] 0 -
- * [30:28] 000 -
- * [27:24] 0000 -
- * [23:20] 0000 -
- * [19] 0 -
- * [18:16] 000 -
- * configuration for nCS4: LAN
- * [15] 1 - Faster Device
- * [14:12] 010 - RRR2: CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [11:08] 0010 - RDN2: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [07:04] 0110 - RDF2: Address for first access: (6+1)*MemClk = 70 ns
- * [03] 0 - 32 Bit bus width
- * [02:00] 100 - variable latency I/O
- */
-#define CONFIG_SYS_MSC2_VAL 0x00001224
-
-/* MDCNFG: SDRAM Configuration Register
- *
- * [31:29] 000 - reserved
- * [28] 0 - no SA1111 compatiblity mode
- * [27] 0 - latch return data with return clock
- * [26] 0 - alternate addressing for pair 2/3
- * [25:24] 00 - timings
- * [23] 0 - internal banks in lower partition 2/3 (not used)
- * [22:21] 00 - row address bits for partition 2/3 (not used)
- * [20:19] 00 - column address bits for partition 2/3 (not used)
- * [18] 0 - SDRAM partition 2/3 width is 32 bit
- * [17] 0 - SDRAM partition 3 disabled
- * [16] 0 - SDRAM partition 2 disabled
- * [15:13] 000 - reserved
- * [12] 0 - no SA1111 compatiblity mode
- * [11] 1 - latch return data with return clock
- * [10] 0 - no alternate addressing for pair 0/1
- * [09:08] 10 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk
- * [7] 1 - 4 internal banks in lower partition pair
- * [06:05] 10 - 13 row address bits for partition 0/1
- * [04:03] 01 - 9 column address bits for partition 0/1
- * [02] 0 - SDRAM partition 0/1 width is 32 bit
- * [01] 0 - disable SDRAM partition 1
- * [00] 1 - enable SDRAM partition 0
- */
-/* use the configuration above but disable partition 0 */
-#define CONFIG_SYS_MDCNFG_VAL 0x00000AC9
-
-/* MDREFR: SDRAM Refresh Control Register
- *
- * [32:26] 0 - reserved
- * [25] 0 - K2FREE: not free running
- * [24] 0 - K1FREE: not free running
- * [23] 0 - K0FREE: not free running
- * [22] 0 - SLFRSH: self refresh disabled
- * [21] 0 - reserved
- * [20] 1 - APD: auto power down
- * [19] 0 - K2DB2: SDCLK2 is MemClk
- * [18] 0 - K2RUN: disable SDCLK2
- * [17] 0 - K1DB2: SDCLK1 is MemClk
- * [16] 1 - K1RUN: enable SDCLK1
- * [15] 1 - E1PIN: SDRAM clock enable
- * [14] 0 - K0DB2: SDCLK0 is MemClk
- * [13] 0 - K0RUN: disable SDCLK0
- * [12] 0 - E0PIN: disable SDCKE0
- * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24
- */
-#define CONFIG_SYS_MDREFR_VAL 0x00138018 /* mh: was 0x00118018 */
-
-/* MDMRS: Mode Register Set Configuration Register
- *
- * [31] 0 - reserved
- * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used)
- * [22:20] 011 - MDCL2: SDRAM2/3 Cas Latency. (not used)
- * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used)
- * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used)
- * [15] 0 - reserved
- * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value.
- * [06:04] 011 - MDCL0: SDRAM0/1 Cas Latency.
- * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential.
- * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4.
- */
-#define CONFIG_SYS_MDMRS_VAL 0x00320032
-
-#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
-#define CONFIG_SYS_SXCNFG_VAL 0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL 0x00000000
-#define CONFIG_SYS_MCMEM0_VAL 0x00010504
-#define CONFIG_SYS_MCMEM1_VAL 0x00010504
-#define CONFIG_SYS_MCATT0_VAL 0x00010504
-#define CONFIG_SYS_MCATT1_VAL 0x00010504
-#define CONFIG_SYS_MCIO0_VAL 0x00004715
-#define CONFIG_SYS_MCIO1_VAL 0x00004715
-
-
-#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff