SPDX: Convert all of our single license tags to Linux Kernel style

[platform/kernel/u-boot.git] / include / configs / woodburn_common.h

diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index 3f837e8..7135e19 100644 (file)
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
  *
  * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
  *
  * Configuration for the woodburn board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __WOODBURN_COMMON_CONFIG_H
@@ -43,8 +42,6 @@
 #define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_SPD_BUS_NUM         0
-#define CONFIG_MXC_SPI
-#define CONFIG_MXC_GPIO
 
 /* PMIC Controller */
 #define CONFIG_POWER
@@ -55,7 +52,6 @@
 #define CONFIG_RTC_MC13XXX
 
 /* mmc driver */
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_ESDHC_NUM       1
 
@@ -67,19 +63,10 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX      1
 
 /*
  * Command definition
  */
-#define CONFIG_CMD_DATE
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_DNS
-
-#define CONFIG_CMD_NAND
-
-#define CONFIG_MXC_GPIO
 
 #define CONFIG_NET_RETRY_COUNT 100
 
@@ -91,8 +78,6 @@
  */
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE   FEC_BASE_ADDR
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
 #define CONFIG_FEC_MXC_PHYADDR 0x1
 
 #define CONFIG_MII
@@ -103,15 +88,6 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE      256     /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 #define CONFIG_SYS_MEMTEST_START       0       /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x10000
@@ -119,13 +95,6 @@
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
 /*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 * 1024)    /* regular stack */
-
-/*
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS   1
@@ -143,18 +112,9 @@
 /*
  * MTD Command for mtdparts
  */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_FLASH_CFI_MTD
 #define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT         "nand0=mxc_nand,nor0=physmap-flash.0"
-#define MTDPARTS_DEFAULT       "mtdparts=mxc_nand:50m(root1)," \
-                               "32m(rootfb)," \
-                               "64m(pcache)," \
-                               "64m(app1)," \
-                               "10m(app2),-(spool);" \
-                               "physmap-flash.0:512k(u-boot),64k(env1)," \
-                               "64k(env2),3776k(kernel1),3776k(kernel2)"
 
 /*
  * FLASH and environment organization
@@ -176,8 +136,6 @@
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE + \
                                CONFIG_SYS_MONITOR_LEN)
 
-#define CONFIG_ENV_IS_IN_FLASH
-
 /*
  * CFI FLASH driver setup
  */
@@ -191,7 +149,6 @@
 /*
  * NAND FLASH driver setup
  */
-#define CONFIG_NAND_MXC
 #define CONFIG_NAND_MXC_V1_1
 #define CONFIG_MXC_NAND_REGS_BASE      (NFC_BASE_ADDR)
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
@@ -199,10 +156,6 @@
 #define CONFIG_MXC_NAND_HWECC
 #define CONFIG_SYS_NAND_LARGEPAGE
 
-#if 0
-#define CONFIG_MTD_DEBUG
-#define CONFIG_MTD_DEBUG_VERBOSE       7
-#endif
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 /*
@@ -210,7 +163,7 @@
  * to update uboot and load kernel
  */
 
-#define CONFIG_HOSTNAME woodburn
+#define CONFIG_HOSTNAME "woodburn"
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "netdev=eth0\0"                                                 \
        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
@@ -228,9 +181,9 @@
        "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
        "loadaddr=80800000\0"                                           \
        "kernel_addr_r=80800000\0"                                      \
-       "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
-       "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
-       "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"      \
+       "hostname=" CONFIG_HOSTNAME "\0"                        \
+       "bootfile=" CONFIG_HOSTNAME "/uImage\0"         \
+       "ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0"   \
        "flash_self=run ramargs addip addtty addmtd addmisc;"           \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
@@ -244,7 +197,7 @@
                "run ramargs addip addtty addmtd addmisc;"              \
                "bootm ${kernel_addr_r} ${ramdisk_addr_r};"             \
                "else echo Images not loades;fi\0"                      \
-       "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
+       "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"               \
        "load=tftp ${loadaddr} ${u-boot}\0"                             \
        "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
        "update=protect off ${uboot_addr} +80000;"                      \