/*
* General options for u-boot. Modify to save memory foot print
*/
-#define CFG_LONGHELP /* undef saves memory */
-#define CFG_PROMPT "WEP> " /* prompt string */
-#define CFG_CBSIZE 256 /* console I/O buffer */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer size */
-#define CFG_MAXARGS 16 /* max command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* boot args buf size */
+#define CONFIG_SYS_LONGHELP /* undef saves memory */
+#define CONFIG_SYS_PROMPT "WEP> " /* prompt string */
+#define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */
+#define CONFIG_SYS_MAXARGS 16 /* max command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */
-#define CFG_MEMTEST_START 0xa0400000 /* memtest test area */
-#define CFG_MEMTEST_END 0xa0800000
+#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest test area */
+#define CONFIG_SYS_MEMTEST_END 0xa0800000
-#undef CFG_CLKS_IN_HZ /* use HZ for freq. display */
+#undef CONFIG_SYS_CLKS_IN_HZ /* use HZ for freq. display */
-#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED 0x141 /* core clock - register value */
+#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
* Definitions related to passing arguments to kernel.
/*
* Malloc pool need to host env + 128 Kb reserve for other allocations.
*/
-#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) )
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) )
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CONFIG_STACKSIZE (120<<10) /* stack size */
#define WEP_SDRAM_4 0xac000000 /* SDRAM bank #4 */
#define WEP_SDRAM_4_SIZE 0x00000000 /* 0 MB */
-#define CFG_DRAM_BASE 0xa0000000
-#define CFG_DRAM_SIZE 0x02000000
+#define CONFIG_SYS_DRAM_BASE 0xa0000000
+#define CONFIG_SYS_DRAM_SIZE 0x02000000
/* Uncomment used SDRAM chip */
#define WEP_SDRAM_K4S281633
/*
* Configuration for FLASH memory
*/
-#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
-#define CFG_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
+#define CONFIG_SYS_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */
#define WEP_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */
#define WEP_FLASH_INTERLEAVE 2 /* ... made of 2 chips */
#define WEP_FLASH_BANK_SIZE 0x2000000 /* size of one flash bank*/
is not so clear to me. In other words we can provide more informations
to user, but this expects more complex flash handling we do not provide
now.*/
-#undef CFG_FLASH_CFI
+#undef CONFIG_SYS_FLASH_CFI
-#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* timeout for Erase operation */
-#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* timeout for Write operation */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Erase operation */
+#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Write operation */
-#define CFG_FLASH_BASE WEP_FLASH_BASE
+#define CONFIG_SYS_FLASH_BASE WEP_FLASH_BASE
/*
* This is setting for JFFS2 support in u-boot.
* footprint.
* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
*/
-#define CFG_JFFS2_FIRST_BANK 0
-#define CFG_JFFS2_FIRST_SECTOR 5
-#define CFG_JFFS2_NUM_BANKS 1
+#define CONFIG_SYS_JFFS2_FIRST_BANK 0
+#define CONFIG_SYS_JFFS2_FIRST_SECTOR 5
+#define CONFIG_SYS_JFFS2_NUM_BANKS 1
/*
* Environment setup. Definitions of monitor location and size with
* env. has no sense to us.
*/
-#define CFG_MONITOR_BASE PHYS_FLASH_1
-#define CFG_MONITOR_LEN 0x20000 /* 128kb ( 1 flash sector ) */
+#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128kb ( 1 flash sector ) */
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR 0x20000 /* absolute address for now */
#define CONFIG_ENV_SIZE 0x2000
* one may expect. For instance loadb command do not cares :-)
* So advice is - do not relay on this...
*/
-#define CFG_LOAD_ADDR 0x40000
+#define CONFIG_SYS_LOAD_ADDR 0x40000
#endif /* __CONFIG_H */
projects / platform / kernel / u-boot.git / blobdiff