Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / wandboard.h

diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index ba88d02..df13e3d 100644 (file)
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -1,77 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2013 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Wandboard.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <config_distro_defaults.h>
 #include "mx6_common.h"
 
 #include "imx6_spl.h"
-#define CONFIG_DISPLAY_BOARDINFO_LATE
 
 #define CONFIG_MACH_TYPE               MACH_TYPE_WANDBOARD_IMX6
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (10 * SZ_1M)
 
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
 
 /* SATA Configs */
 
 #ifdef CONFIG_CMD_SATA
-#define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE     1
 #define CONFIG_DWC_AHSATA_PORT_ID      0
 #define CONFIG_DWC_AHSATA_BASE_ADDR    SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
-#define CONFIG_LIBATA
 #endif
 
-#define CONFIG_SYS_MEMTEST_START       0x10000000
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED           100000
-
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
-
 /* MMC Configuration */
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
 /* USB Configs */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT        2
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 
-/* Ethernet Configuration */
-#define CONFIG_FEC_MXC
-#define CONFIG_MII
-#define IMX_FEC_BASE                   ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE            RGMII
-#define CONFIG_ETHPRIME                        "FEC"
-#define CONFIG_FEC_MXC_PHYADDR         1
-#define CONFIG_PHY_ATHEROS
-
 /* Framebuffer */
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_IPUV3
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
@@ -80,12 +45,11 @@
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
-#endif
 
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
-       "console=ttymxc0,115200\0" \
+       "console=ttymxc0\0" \
        "splashpos=m,m\0" \
+       "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
        "fdtfile=undefined\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
@@ -109,6 +73,8 @@
                        "fi; "  \
                "fi\0" \
        "findfdt="\
+               "if test $board_name = D1 && test $board_rev = MX6QP ; then " \
+                       "setenv fdtfile imx6qp-wandboard-revd1.dtb; fi; " \
                "if test $board_name = D1 && test $board_rev = MX6Q ; then " \
                        "setenv fdtfile imx6q-wandboard-revd1.dtb; fi; " \
                "if test $board_name = D1 && test $board_rev = MX6DL ; then " \
@@ -133,20 +99,16 @@
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
        func(MMC, mmc, 1) \
+       func(MMC, mmc, 2) \
        func(SATA, sata, 0) \
        func(USB, usb, 0) \
        func(PXE, pxe, na) \
        func(DHCP, dhcp, na)
 
-#define CONFIG_BOOTCOMMAND \
-          "run findfdt; " \
-          "run finduuid; " \
-          "run distro_bootcmd"
-
 #include <config_distro_bootcmd.h>
+#include <linux/stringify.h>
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
@@ -159,9 +121,5 @@
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* Environment organization */
-#define CONFIG_ENV_SIZE                        (8 * 1024)
-
-#define CONFIG_ENV_OFFSET              (768 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV         0
 
 #endif                        /* __CONFIG_H * */