Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / wandboard.h

diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index a0a78ea..7b8c5cb 100644 (file)
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -10,50 +10,20 @@
 
 #include "mx6_common.h"
 
-#include "imx6_spl.h"
-
-#define CONFIG_MACH_TYPE               MACH_TYPE_WANDBOARD_IMX6
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (10 * SZ_1M)
-
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE           UART1_BASE
-
-/* SATA Configs */
-
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE     1
-#define CONFIG_DWC_AHSATA_PORT_ID      0
-#define CONFIG_DWC_AHSATA_BASE_ADDR    SATA_ARB_BASE_ADDR
-#define CONFIG_LBA48
-#endif
-
-#define CONFIG_SYS_MEMTEST_START       0x10000000
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
+#define CFG_MXC_UART_BASE              UART1_BASE
 
 /* MMC Configuration */
-#define CONFIG_SYS_FSL_USDHC_NUM       2
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
+#define CFG_SYS_FSL_USDHC_NUM  2
+#define CFG_SYS_FSL_ESDHC_ADDR 0
 
 /* USB Configs */
-#define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS           0
-
-/* Framebuffer */
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IMX_HDMI
-#define CONFIG_IMX_VIDEO_SKIP
+#define CFG_MXC_USB_PORTSC             (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CFG_MXC_USB_FLAGS              0
 
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
        "console=ttymxc0\0" \
        "splashpos=m,m\0" \
-       "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
+       "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
        "fdtfile=undefined\0" \
        "fdt_high=0xffffffff\0" \
        "initrd_high=0xffffffff\0" \
@@ -93,11 +63,11 @@
                        "setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
                "if test $fdtfile = undefined; then " \
                        "echo WARNING: Could not determine dtb to use; fi; \0" \
-       "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-       "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+       "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+       "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
        "ramdisk_addr_r=0x13000000\0" \
        "ramdiskaddr=0x13000000\0" \
-       "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
+       "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
        BOOTENV
 
 #define BOOT_TARGET_DEVICES(func) \
@@ -110,23 +80,15 @@
        func(DHCP, dhcp, na)
 
 #include <config_distro_bootcmd.h>
+#include <linux/stringify.h>
 
 /* Physical Memory Map */
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
-#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_SDRAM_BASE             PHYS_SDRAM
+#define CFG_SYS_INIT_RAM_ADDR  IRAM_BASE_ADDR
+#define CFG_SYS_INIT_RAM_SIZE  IRAM_SIZE
 
 /* Environment organization */
-#define CONFIG_ENV_SIZE                        (8 * 1024)
-
-#define CONFIG_ENV_OFFSET              (768 * 1024)
-#define CONFIG_SYS_MMC_ENV_DEV         0
 
 #endif                        /* __CONFIG_H * */