include/configs: remove numerous CONFIG_SYS_BARGSIZE definitions

[platform/kernel/u-boot.git] / include / configs / vme8349.h

diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h
index a6f5d6a..7df6a46 100644 (file)
--- a/include/configs/vme8349.h
+++ b/include/configs/vme8349.h
@@ -18,9 +18,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_BOARDINFO
-
 /*
  * Top level Makefile configuration choices
  */
@@ -40,7 +37,6 @@
 
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_PCI
 /* Don't enable PCI2 on vme834x - it doesn't exist physically. */
 #undef CONFIG_MPC83XX_PCI2             /* support for 2nd PCI controller */
 
@@ -201,7 +197,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -214,13 +209,6 @@
 
 #define CONFIG_CMDLINE_EDITING         /* add command line history     */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support */
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -278,7 +266,6 @@
 
 #ifndef VME_CADDY2
 #endif
-#define CONFIG_PCI_PNP         /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
@@ -326,7 +313,6 @@
  * Environment
  */
 #ifndef CONFIG_SYS_RAMBOOT
-       #define CONFIG_ENV_IS_IN_FLASH
        #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + 0xc0000)
        #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
        #define CONFIG_ENV_SIZE         0x2000
@@ -336,8 +322,6 @@
 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
 
 #else
-       #define CONFIG_SYS_NO_FLASH             /* Flash is not usable now */
-       #define CONFIG_ENV_IS_NOWHERE           /* Store ENV in memory only */
        #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
        #define CONFIG_ENV_SIZE         0x2000
 #endif
@@ -356,22 +340,9 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DATE
 #define CONFIG_SYS_RTC_BUS_NUM  0x01
 #define CONFIG_SYS_I2C_RTC_ADDR        0x32
 #define CONFIG_RTC_RX8025
-#define CONFIG_CMD_TSI148
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_ENV
-#endif
 
 /* Pass Ethernet MAC to VxWorks */
 #define CONFIG_SYS_VXWORKS_MAC_PTR     0x000043f0
@@ -384,16 +355,6 @@
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 
-#if defined(CONFIG_CMD_KGDB)
-       #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
-#else
-       #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS     16              /* max num of command args */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
@@ -554,11 +515,6 @@
 
 #define CONFIG_LOADADDR                800000  /* def location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY       6       /* -1 disables auto-boot */
-#undef  CONFIG_BOOTARGS                        /* boot command will set bootargs */
-
-#define CONFIG_BAUDRATE         9600
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "netdev=eth0\0"                                                 \
        "hostname=vme8349\0"                                            \