+++ /dev/null
-/*
- * (C) Copyright 2009-2012
- * Jens Scharsig <esw@bus-elekronik.de>
- * BuS Elektronik GmbH & Co. KG
- *
- * Configuation settings for the VL_MA2SC board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*--------------------------------------------------------------------------*/
-
-#define CONFIG_ARM926EJS /* This is an ARM926EJS Core */
-#define CONFIG_AT91FAMILY
-#define CONFIG_AT91SAM9263 /* It's an Atmel AT91SAM9263 SoC*/
-#define CONFIG_VL_MA2SC /* on an VL_MA2SC Board */
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_MISC_INIT_R
-
-#include <asm/hardware.h>
-
-#define MACH_TYPE_VL_MA2SC 2412
-#define CONFIG_MACH_TYPE MACH_TYPE_VL_MA2SC
-
-#define CONFIG_SYS_DCACHE_OFF
-
-#ifdef CONFIG_RAMLOAD
-#define CONFIG_SYS_TEXT_BASE 0x21000000
-#else
-#define CONFIG_SYS_TEXT_BASE 0x00000000
-#endif
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-#define CONFIG_IDENT_STRING " on MiS Activ 2"
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AT91_GPIO
-
-#if !defined(CONFIG_SYS_USE_NANDFLASH) && !defined(CONFIG_RAMLOAD)
-#define CONFIG_SYS_USE_NORFLASH
-#define CONFIG_SYS_USE_BOOT_NORFLASH
-#endif
-
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#ifndef CONFIG_SYS_USE_BOOT_NORFLASH
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#define CONFIG_WATCHDOG
-
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE ATMEL_BASE_DBGU
-#define CONFIG_USART_ID ATMEL_ID_SYS
-
-/* LCD */
-#define CONFIG_LCD
-#define CONFIG_ATMEL_LCD
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SYS_BLACK_ON_WHITE
-#define LCD_BPP LCD_COLOR8
-#define CONFIG_ATMEL_LCD_BGR555
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_BOOTDELAY 3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_LOADS
-
-#define CONFIG_CMD_BMP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MD5SUM
-#define CONFIG_CMD_SHA1SUM
-/*
-#define CONFIG_CMD_SPI
-*/
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_USB
-
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_MD5
-#define CONFIG_SHA1
-
-/*----------------------------------------------------------------------------
- * Hardware confuguration
- *---------------------------------------------------------------------------*/
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* UHP_BASE */
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_USB_STORAGE
-#define CONFIG_AT91C_PQFP_UHPBUG
-
-/* I2C-Bus */
-
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
-
-#ifndef CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED CONFIG_SYS_I2C_SPEED
-#define CONFIG_SYS_I2C_SOFT_SLAVE CONFIG_SYS_I2C_SLAVE
-
-/* Software I2C driver configuration */
-#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SPEED)
-
-#define AT91_PIN_SDA (1<<4) /* AT91C_PIO_PB4 */
-#define AT91_PIN_SCL (1<<5) /* AT91C_PIO_PB5 */
-
-#define I2C_INIT i2c_init_board();
-#define I2C_ACTIVE writel(AT91_PIN_SDA, &pio->piob.mddr);
-#define I2C_TRISTATE writel(AT91_PIN_SDA, &pio->piob.mder);
-#define I2C_READ ((readl(&pio->piob.pdsr) & AT91_PIN_SDA) != 0)
-#define I2C_SDA(bit) \
- do { \
- if (bit) \
- writel(AT91_PIN_SDA, &pio->piob.sodr); \
- else \
- writel(AT91_PIN_SDA, &pio->piob.codr); \
- } while (0);
-#define I2C_SCL(bit) \
- do { \
- if (bit) \
- writel(AT91_PIN_SCL, &pio->piob.sodr); \
- else \
- writel(AT91_PIN_SCL, &pio->piob.codr); \
- } while (0);
-#endif
-
-/* I2C-RTC */
-
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_DS1338
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-#endif
-
-/* EEPROM */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-
-/* define PDC[31:16] as DATA[31:16] */
-#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000
-#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000
-
-/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
-#define CONFIG_SYS_MATRIX_EBI0CSA_VAL \
- (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \
- AT91_MATRIX_CSA_EBI_CS1A)
-
-/* user reset enable */
-#define CONFIG_SYS_RSTC_RMR_VAL \
- (AT91_RSTC_KEY | \
- AT91_RSTC_MR_URSTEN | \
- AT91_RSTC_MR_ERSTL(15))
-
-/* Disable Watchdog */
-#define CONFIG_SYS_WDTC_WDMR_VAL \
- (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \
- AT91_WDT_MR_WDV(0xFFF) | \
- AT91_WDT_MR_WDDIS | \
- AT91_WDT_MR_WDD(0xFFF))
-
-/* clocks */
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define MHZ180
-#if defined(MHZ199)
-/* 199,8994 MHZ */
-#define MASTER_PLL_MUL 911
-#define MASTER_PLL_DIV 56
-#define MASTER_PLL_OUT 2
-#elif defined(MHZ180)
-/* 180 MHZ */
-#define MASTER_PLL_MUL 1875
-#define MASTER_PLL_DIV 128
-#define MASTER_PLL_OUT 2
-#elif defined(MHZTEST)
-/* Test MHZ */
-#define CONFIG_DISPLAY_CPUINFO
-#define MASTER_PLL_MUL 8
-#define MASTER_PLL_DIV 1
-#define MASTER_PLL_OUT 2
-#else
-/* 176.9472 MHZ */
-#define MASTER_PLL_MUL 72
-#define MASTER_PLL_DIV 5
-#define MASTER_PLL_OUT 2
-#endif
-
-#define CONFIG_SYS_MOR_VAL \
- (AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255))
-
-#define CONFIG_SYS_PLLAR_VAL \
- (AT91_PMC_PLLAR_29 | \
- AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \
- AT91_PMC_PLLXR_PLLCOUNT(63) | \
- AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \
- AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV))
-
-/* PCK/2 = MCK Master Clock from PLLA */
-#define CONFIG_SYS_MCKR1_VAL \
- (AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 | \
- AT91_PMC_MCKR_MDIV_2)
-
-/* PCK/2 = MCK Master Clock from PLLA */
-#define CONFIG_SYS_MCKR2_VAL \
- (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \
- AT91_PMC_MCKR_MDIV_2)
-
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_SDRAM_BASE 0x20000000
-#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */
-#define CONFIG_SYS_INIT_SP_ADDR 0x00504000 /* use internal SRAM0 */
-
-#define CONFIG_SYS_SDRC_MR_VAL1 0
-#define CONFIG_SYS_SDRC_TR_VAL1 700
-#define CONFIG_SYS_SDRC_CR_VAL \
- (AT91_SDRAMC_NC_9 | \
- AT91_SDRAMC_NR_13 | \
- AT91_SDRAMC_NB_4 | \
- AT91_SDRAMC_CAS_3 | \
- AT91_SDRAMC_DBW_32 | \
- (2 << 8) | /* Write Recovery Delay */ \
- (7 << 12) | /* Row Cycle Delay */ \
- (2 << 16) | /* Row Precharge Delay */ \
- (2 << 20) | /* Row to Column Delay */ \
- (5 << 24) | /* Active to Precharge Delay */ \
- (8 << 28)) /* Exit Self Refresh to Active Delay */
-
-#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM
-#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE
-#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH
-#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR
-#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL
-#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */
-#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */
-#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */
-
-/* NOR flash */
-
-#define CONFIG_FLASH_SHOW_PROGRESS 45
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define PHYS_FLASH_1 0x10000000
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000)
-
-/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
-#define CONFIG_SYS_SMC0_SETUP0_VAL \
- (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \
- AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
-#define CONFIG_SYS_SMC0_PULSE0_VAL \
- (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \
- AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
-#define CONFIG_SYS_SMC0_CYCLE0_VAL \
- (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
-#define CONFIG_SYS_SMC0_MODE0_VAL \
- (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \
- AT91_SMC_MODE_DBW_16 | \
- AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6))
-
-/* NAND flash */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_DBW_8 1
-#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* our CLE is AD22 */
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTB, 0
-#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
-#endif
-
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_MULTI
-#define CONFIG_NET_RETRY_COUNT 5
-
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END 0x21e00000
-
-/* Address and size of Primary Environment Sector */
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SIZE 0x20000
-#else
-#define CONFIG_ENV_SIZE 0x2000
-#endif
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {312500, 230400, 115200, 19200, \
- 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> "
-#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
-#define CONFIG_SYS_PBSIZE \
- (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN \
- ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
-
-#ifndef CONFIG_RAMLOAD
-#define CONFIG_BOOTCOMMAND "run nfsboot"
-#endif
-#define CONFIG_BOOT_RETRY_TIME -1
-#define CONFIG_BOOT_RETRY_MIN 15
-
-#define CONFIG_NFSBOOTCOMMAND \
- "dhcp $(copy_addr) $(kernelname);" \
- "run bootargsdefaults;" \
- "set bootargs $(bootargs) boot=nfs " \
- ";echo $(bootargs)" \
- ";bootm"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "ubootaddr=10000000\0" \
- "splashimage=10080000\0" \
- "kerneladdr=100A0000\0" \
- "kernelsize=00800000\0" \
- "minifsaddr=108A0000\0" \
- "minifssize=00060000\0" \
- "rootfsaddr=10900000\0" \
- "copy_addr=20200000\0" \
- "rootfssize=01700000\0" \
- "kernelname=uImage_vl_ma2sc\0" \
- "bootargsdefaults=set bootargs " \
- "console=ttyS0,115200 " \
- "video=atmel_lcdfb " \
- "mem=62M " \
- "panic=10 " \
- "boardrevison=\\\"${revision}\\\" " \
- "uboot=\\\"${ver}\\\" " \
- "\0" \
- "update_all=run update_kernel;run update_root;" \
- "run update_splash; run update_uboot\0" \
- "update_kernel=protect off $(kerneladdr) +$(kernelsize);" \
- "dhcp $(copy_addr) $(kernelname);" \
- "erase $(kerneladdr) +$(kernelsize);" \
- "cp.b $(fileaddr) $(kerneladdr) $(filesize);" \
- "protect on $(kerneladdr) +$(kernelsize)" \
- "\0" \
- "update_root=protect off $(rootfsaddr) +$(rootfssize);" \
- "dhcp $(copy_addr) vl_ma2sc.root;" \
- "erase $(rootfsaddr) +$(rootfssize);" \
- "cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \
- "\0" \
- "update_splash=protect off $(splashimage) +20000;" \
- "dhcp $(copy_addr) splash_vl_ma2sc.bmp;" \
- "erase $(splashimage) +20000;" \
- "cp.b $(fileaddr) 10080000 $(filesize);" \
- "protect on $(splashimage) +20000\0" \
- "update_uboot=protect off 10000000 1005FFFF;" \
- "dhcp $(copy_addr) u-boot_vl_ma2sc;" \
- "erase 10000000 1005FFFF;" \
- "cp.b $(fileaddr) $(ubootaddr) $(filesize);" \
- "protect on 10000000 1005FFFF;reset\0" \
- "emergency=run bootargsdefaults;" \
- "set bootargs $(bootargs) root=initramfs boot=emergency " \
- ";bootm $(kerneladdr)\0" \
- "netemergency=run bootargsdefaults;" \
- "dhcp $(copy_addr) $(kernelname);" \
- "set bootargs $(bootargs) root=initramfs boot=emergency " \
- ";bootm $(copy_addr)\0" \
- "norboot=run bootargsdefaults;" \
- "set bootargs $(bootargs) root=initramfs boot=local quiet " \
- ";bootm $(kerneladdr)\0" \
- "nandboot=run bootargsdefaults;" \
- "set bootargs $(bootargs) root=initramfs boot=nand " \
- ";bootm $(kerneladdr)\0" \
- "setnorboot=set bootcmd 'run norboot'; set bootdelay 1;save\0" \
- "clearenv=protect off 10060000 1007FFFF;" \
- "erase 10060000 1007FFFF;reset\0" \
- " "
-
-#endif
projects / platform / kernel / u-boot.git / blobdiff