+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration for Versatile Express. Parts were derived from other ARM
- * configurations.
- */
-
-#ifndef __VEXPRESS_AEMV8A_H
-#define __VEXPRESS_AEMV8A_H
-
-#define CONFIG_REMAKE_ELF
-
-/* Link Definitions */
-#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
-/* ATF loads u-boot here for BASE_FVP model */
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
-#elif CONFIG_TARGET_VEXPRESS64_JUNO
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
-#endif
-
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
-/* CS register bases for the original memory map. */
-#define V2M_PA_CS0 0x00000000
-#define V2M_PA_CS1 0x14000000
-#define V2M_PA_CS2 0x18000000
-#define V2M_PA_CS3 0x1c000000
-#define V2M_PA_CS4 0x0c000000
-#define V2M_PA_CS5 0x10000000
-
-#define V2M_PERIPH_OFFSET(x) (x << 16)
-#define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
-#define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
-#define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
-
-#define V2M_BASE 0x80000000
-
-/* Common peripherals relative to CS7. */
-#define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
-#define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
-#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
-#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
-
-#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-#define V2M_UART0 0x7ff80000
-#define V2M_UART1 0x7ff70000
-#else /* Not Juno */
-#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
-#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
-#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
-#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
-#endif
-
-#define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
-
-#define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
-#define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
-
-#define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
-#define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))
-
-#define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
-
-#define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
-
-/* System register offsets. */
-#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
-#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
-#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
-
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY 24000000 /* 24MHz */
-
-/* Generic Interrupt Controller Definitions */
-#ifdef CONFIG_GICV3
-#define GICD_BASE (0x2f000000)
-#define GICR_BASE (0x2f100000)
-#else
-
-#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
-#define GICD_BASE (0x2f000000)
-#define GICC_BASE (0x2c000000)
-#elif CONFIG_TARGET_VEXPRESS64_JUNO
-#define GICD_BASE (0x2C010000)
-#define GICC_BASE (0x2C02f000)
-#endif
-#endif /* !CONFIG_GICV3 */
-
-#ifndef CONFIG_TARGET_VEXPRESS64_JUNO
-/* The Vexpress64 simulators use SMSC91C111 */
-#define CONFIG_SMC91111 1
-#define CONFIG_SMC91111_BASE (0x01A000000)
-#endif
-
-/* PL011 Serial Configuration */
-#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-#define CONFIG_PL011_CLOCK 7372800
-#else
-#define CONFIG_PL011_CLOCK 24000000
-#endif
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/* Miscellaneous configurable options */
-
-/* Physical Memory Map */
-#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
-/* Top 16MB reserved for secure world use */
-#define DRAM_SEC_SIZE 0x01000000
-#define PHYS_SDRAM_1_SIZE 0x80000000 - DRAM_SEC_SIZE
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-
-#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-#define PHYS_SDRAM_2 (0x880000000)
-#define PHYS_SDRAM_2_SIZE 0x180000000
-#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP && CONFIG_NR_DRAM_BANKS == 2
-#define PHYS_SDRAM_2 (0x880000000)
-#define PHYS_SDRAM_2_SIZE 0x80000000
-#endif
-
-/* Enable memtest */
-
-/* Initial environment variables */
-#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-/* Copy the kernel and FDT to DRAM memory and boot */
-#define BOOTENV_DEV_AFS(devtypeu, devtypel, instance) \
- "bootcmd_afs=" \
- "afs load ${kernel_name} ${kernel_addr_r} ;"\
- "if test $? -eq 1; then "\
- " echo Loading ${kernel_alt_name} instead of ${kernel_name}; "\
- " afs load ${kernel_alt_name} ${kernel_addr_r};"\
- "fi ; "\
- "afs load ${fdtfile} ${fdt_addr_r} ;"\
- "if test $? -eq 1; then "\
- " echo Loading ${fdt_alt_name} instead of ${fdtfile}; "\
- " afs load ${fdt_alt_name} ${fdt_addr_r}; "\
- "fi ; "\
- "fdt addr ${fdt_addr_r}; fdt resize; " \
- "if afs load ${ramdisk_name} ${ramdisk_addr_r} ; "\
- "then "\
- " setenv ramdisk_param ${ramdisk_addr_r}; "\
- "else "\
- " setenv ramdisk_param -; "\
- "fi ; " \
- "booti ${kernel_addr_r} ${ramdisk_param} ${fdt_addr_r}\0"
-#define BOOTENV_DEV_NAME_AFS(devtypeu, devtypel, instance) "afs "
-
-#define BOOT_TARGET_DEVICES(func) \
- func(USB, usb, 0) \
- func(SATA, sata, 0) \
- func(SATA, sata, 1) \
- func(PXE, pxe, na) \
- func(DHCP, dhcp, na) \
- func(AFS, afs, na)
-
-#include <config_distro_bootcmd.h>
-
-/*
- * Defines where the kernel and FDT exist in NOR flash and where it will
- * be copied into DRAM
- */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel_name=norkern\0" \
- "kernel_alt_name=Image\0" \
- "kernel_addr_r=0x80080000\0" \
- "ramdisk_name=ramdisk.img\0" \
- "ramdisk_addr_r=0x88000000\0" \
- "fdtfile=board.dtb\0" \
- "fdt_alt_name=juno\0" \
- "fdt_addr_r=0x80000000\0" \
- BOOTENV
-
-#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel_name=Image\0" \
- "kernel_addr=0x80080000\0" \
- "initrd_name=ramdisk.img\0" \
- "initrd_addr=0x88000000\0" \
- "fdtfile=devtree.dtb\0" \
- "fdt_addr=0x83000000\0" \
- "boot_name=boot.img\0" \
- "boot_addr=0x8007f800\0"
-
-#ifndef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "if smhload ${boot_name} ${boot_addr}; then " \
- " set bootargs; " \
- " abootimg addr ${boot_addr}; " \
- " abootimg get dtb --index=0 fdt_addr; " \
- " bootm ${boot_addr} ${boot_addr} " \
- " ${fdt_addr}; " \
- "else; " \
- " set fdt_high 0xffffffffffffffff; " \
- " set initrd_high 0xffffffffffffffff; " \
- " smhload ${kernel_name} ${kernel_addr}; " \
- " smhload ${fdtfile} ${fdt_addr}; " \
- " smhload ${initrd_name} ${initrd_addr} "\
- " initrd_end; " \
- " fdt addr ${fdt_addr}; fdt resize; " \
- " fdt chosen ${initrd_addr} ${initrd_end}; " \
- " booti $kernel_addr - $fdt_addr; " \
- "fi"
-#endif
-#endif
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 64 /* max command args */
-
-#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
-#define CONFIG_SYS_FLASH_BASE 0x08000000
-/* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */
-#define CONFIG_SYS_MAX_FLASH_SECT 259
-/* Store environment at top of flash in the same location as blank.img */
-/* in the Juno firmware. */
-#else
-#define CONFIG_SYS_FLASH_BASE 0x0C000000
-/* 256 x 256KiB sectors */
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-/* Store environment at top of flash */
-#endif
-
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
-#endif
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
-#define FLASH_MAX_SECTOR_SIZE 0x00040000
-
-#endif /* __VEXPRESS_AEMV8A_H */
projects / platform / kernel / u-boot.git / blobdiff